Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear security”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sewer System Management Plan

The Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC (NTESS), a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration (DOE/NNSA) under contract DE-NA0003525. In 2008, a Notice of Intent (NOI) was filed for the Sandia National Laboratories, California (SNL/CA) facility to be covered under the State Water Resources Control Board (SWRCB) Order No. 2006-0003-DWQ Statewide General Waste Discharge Requirements (WDR) for Sanitary Sewer Systems (General Permit) and was issued the WDID No. 2SSO11605. The General Permit requires a proactive approach to reduce the number and frequency of sanitary sewer overflows (SSOs) within the State. Provision D.11 of the General Permit requires the development and implementation of a written Sewer System Management Plan (SSMP). This SSMP is prepared according to the mandatory elements required by Provision D.13 and D.14, as well as the schedule for a population less than 2,500 as outlined in Provision D.15.

42 ENGINEERING↗
DOE OSTI2022

Los Alamos National Laboratory Floodplain Assessment for the Technical Area 72 Outdoor Live Fire Range Gate Installation Project

The National Nuclear Security Administration (NNSA), a semi-autonomous agency within the U.S. Department of Energy (DOE), is proposing new construction in lower Sandia Canyon at Technical Area (TA) 72 at the Outdoor Live Fire Range facility at Los Alamos National Laboratory (LANL). The proposed upgrades are intended to improve range safety.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Schema Elements for Granta Annual Report: FY2022

Granta: Materials Intelligence, also known as Granta:MI or Granta, is a commercial database software by Ansys, Inc. that is utilized by the Nuclear Security Enterprise (NSE) to organize and store relevant materials data. For a complete discussion of the use of Granta:MI at NSE sites, see the FY21 annual report. Granta:MI is used by five NSE sites locally, and all NSE sites have access to an enterprise instance on the Enterprise Secure Network (ESN) as well as an unclassified development instance. It has been recognized by NNSA management that a shared repository for additive manufacturing (AM) data would not only ensure data and knowledge is not lost but would provide a pool of information relating AM inputs (build parameters, raw materials properties, post-processing information) to the as-built properties of AM parts. Such a pool of data would enable optimization of AM build design and help NNSA achieve the goals of shortening fielding times for new components.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Satellite Enveloped with STITCHED Engineering Sensors for Detection of Approaching Objects

Today as well as tomorrows spaceborne assets impact almost all areas of national and nuclear security. Spaceborne assets can not only collect and disseminate valuable data, well beyond just the visual, but also track terrestrial-based mobile assets in real-time, and active spaceborne platforms potentially pose serious risk to vulnerable earth-based systems and infrastructures. The capability to defend national spaceborne assets from attack/interference is critical for security interests. This effort supports this mission through the cost-effective preeminent detection of approaching threats to our nation’s vital resources, in order to help secure and trust these high-value assets against the threats of tomorrow. This project develops novel fabrication techniques for conformal, low-profile and lightweight leakywave antenna (LWA) detection/imaging systems, which fuses technical embroidery (TE) and laser ablation (LA) processes with LWA design. Technical embroidery is an emerging field in additive textile manufacturing where flexible materials and functionalized fabrics are created for a wide variety of uses and purposes, while laser ablation is the process of removing material from a solid surface by irradiating it with a laser beam. Here, thin, conformal antenna designs are designed, modeled and fabricated using both TE and LA, to create lightweight, flexible and conformal object detection and imaging radars. This novel development ensures our nation’s ability to field advanced lightweight and conformal technologies to protect spaceborne assets.

42 ENGINEERING↗
DOE OSTI2022

Quasi-static to Dynamic Response and Microstructure Development of Tantalum-Tungsten Alloys

Lawrence Livermore National Laboratory (LLNL) has a need to understand the quasi-static to dynamic mechanical response and microstructure evolution of tantalum-tungsten (Ta-W) alloys made by conventional wrought processing and additive manufacturing (AM). This two-year work scope will be performed at the Colorado School of Mines (Mines) and will include quasi-static (e.g., 10 -3 s -1 ) mechanical testing in tension and compression, along with high strain rate (Kolsky) pressure bar testing in tension and compression (e.g., 10 3 s -1 ), without and with temperature variations. Gas gun experiments at higher strain rates (e.g., over 10 3 s -1 ) will also be pursued. Complementary microstructure characterization will be performed on undeformed and deformed samples to fundamentally understand the role of processing on the microstructure characteristics and resulting deformation mechanisms that dictate the mechanical response of these alloys with variations in strain rate, temperature, and strain state. Alloys of interest will be Ta-based, containing up to 10 wt.% W. LLNL will supply initial wrought-processed material for sample machining. LLNL will also supply samples built by AM during the project for testing. Arc melting and casting may also be performed at Mines to produce small quantities of different alloys for machining and exploratory testing on an as-needed basis. This project will support multiple postdocs and graduate students at Mines, training them with the knowledge, skills, and abilities needed to study materials under extreme conditions of interest to the National Nuclear Security Agency.

36 MATERIALS SCIENCE↗
DOE OSTI2022

FY2023 Site Sustainability Plan

The Sandia National Laboratories site sustainability plan and its associated DOE Sustainability Dashboard data entries encompass Sandia National Laboratories contributions toward meeting the DOE sustainability goals. This site sustainability plan fulfills the contractual requirement for National Technology & Engineering Solutions of Sandia, LLC, the management and operating contractor for Sandia National Laboratories, to deliver an annual sustainability plan to the DOE National Nuclear Security Administration Sandia Field Office.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The U.S. Department of Energy Computational Science Graduate Fellowship, 1991-2021: Follow-Up Study Shows Major Impact on Recipients and the Scientific Workforce

Since 1991, the U.S. Department of Energy Computational Science Graduate Fellowship (DOE CSGF) has addressed DOE National Laboratory needs as well as demands in the national workforce for trained professionals in computational science and engineering. Sponsored by the Department of Energy's Office of Science and the National Nuclear Security Administration, the DOE CSGF supports doctoral students in the pursuit of novel scientific or engineering discoveries using high-performance computing (HPC) resources. To meet the program’s core requirements, recipients participate in multidisciplinary studies, carry out at least one 12-week DOE laboratory research practicum, and contribute to an annual program review where the fellows present their research for sponsor review. The Krell Institute, which as managed the fellowship on behalf of the DOE since 1997, has commissioned several follow-up studies to examine the DOE CSGF recipients’ characteristics, fellows’ outcomes and professional accomplishments, alumni’s career paths and achievements, and recipients’ impact on national priorities through research and education.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

From Protection and Prevention to Research and Discovery: Eligibility Assessment of the Health Research Laboratory (TA-43) and Historic Documentation for TA-43-0001 - Volume 1

The U.S. Department of Energy National Nuclear Security Administration Los Alamos Field Office (NA-LA) requests the New Mexico State Historic Preservation Officer (SHPO) to concur with the National Register of Historic Places (NRHP)–eligibility determinations detailed in this report for the Health Research Laboratory (HRL) complex in Technical Area 43 (TA-43) at the Los Alamos National Laboratory (LANL). As part of the LANL Footprint Reduction Program’s Decommissioning and Demolition (D&D) process, all facilities of the HRL complex are scheduled for characterization and future demolition.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Los Alamos National Laboratory Floodplain Assessment for the Technical Area 72 Outdoor Live Fire Range Storage Units Installation Project

The National Nuclear Security Administration (NNSA), a semi-autonomous agency within the U.S. Department of Energy (DOE), is proposing new construction in lower Sandia Canyon at Technical Area (TA) 72 at the Outdoor Live Fire Range facility at Los Alamos National Laboratory (LANL). The proposed project is intended to provide storage for firing range supplies and consumables. The project activities within the 100-year floodplain include installation of at least seven prefabricated metal transportainer type storage units located at one of four locations (Figure 1).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Status of Additive Manufacturing Capabilities for Processing Refractory Alloys Under the Mo-99 Program

The enriched 100 Mo target, denoted as aMo, that Northstar Medical Radioisotopes is developing to produce 99 Mo from an accelerator-based method is a disk-type geometry with a 0.5–0.715 mm thickness and a 29 mm outer diameter. A press and sinter method was adopted to fabricate these samples from aMo powder feedstock. Inherent porosity from the press and sinter method makes the disks more easily dissolvable during 99 Mo postprocessing. However, the disk-type geometry will be subject to thermal stresses due to temperature variations once the geometry is in line with the accelerated electron beam, causing warping and possible failure. Additive manufacturing (AM) processes such as laser powder bed fusion (LPBF) enable the manufacturing of custom, complex geometries that may otherwise be difficult to produce with more conventional methods (e.g., press and sinter approach). Therefore, the National Nuclear Security Administration’s Molybdenum-99 Program invested in developing an AM facility dedicated to processing and printing refractory powders. This report details the LPBF process, how irregular refractory powder can be prepared for LPBF, and the equipment that is available to support the program.

36 MATERIALS SCIENCE↗
DOE OSTI2023

LANL Workforce Reporting Tool

The LANL Workforce Reporting Tool compiles and analyzes workforce demographics and attributes as presented in the annual Stockpile and Stewardship Management Plan (SSMP) over FY15-21 using MicroStrategy, a data analytics and visualization software. There are three major employee populations included in the tool: 1) LANL’s regular (permanent) employees; 2) LANL’s entire workforce (regular, craft, contractors, students, post doctorate students, limited term employees, and lab associates); 3) The Nuclear Security Enterprise’s (NSE) permanent career employees (combined and site-by-site).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

An evaluation of risks associated with relying on Fortran for mission critical codes for the next 15 years

This document examines risks associated with relying on Fortran for codes critical to nuclear security into the late 2030s. The study was requested by the LANL ASC program office to support its decisions. To date, much of the discussion about the prospects for Fortran has tended to be informal and centered on questions (such as, “will the language be around in 20 years”) that are impossible to answer with any certainty. By focusing on estimates of the likelihood associated with different outcomes, rather than on specific predictions, we hope to clarify points of disagreement within the community and strengthen the analytic basis for reasoning about the future.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

2020 Postclosure Groundwater Monitoring and Inspection Report, Central Nevada Test Area, Subsurface Corrective Action Unit 443

This report presents the groundwater monitoring data collected by the U.S. Department of Energy (DOE) Office of Legacy Management (LM) from the Central Nevada Test Area (CNTA), Nevada, Site, Subsurface Corrective Action Unit (CAU) 443 in Nye County, Nevada (Figure 1). The CNTA is the site of an underground nuclear test in 1968 that resulted in residual contamination near the detonation depth of 3200 feet (ft); the contamination requires long-term monitoring. Responsibility for the environmental restoration and long-term monitoring was transferred from DOE’s National Nuclear Security Administration, Nevada Field Office, to LM on October 1, 2006. The environmental restoration and site closure process were completed in 2015 in accordance with the amended 1996 Nevada Federal Facility Agreement and Consent Order (FFACO) (State of Nevada et al. 1996, as amended) and all applicable Nevada Division of Environmental Protection (NDEP) policies and regulations. The Closure Report, Central Nevada Test Area, Subsurface Corrective Action, Unit 443 (DOE 2018), also called the Closure Report, originally was completed in January 2016 and revised in October 2018; it describes LM’s plan for long-term postclosure monitoring. This includes monitoring of the radioisotopes of interest and water elevations, inspecting the site and maintaining the institutional controls (ICs), evaluating and reporting data, and documenting the site’s records and data management processes (DOE 2018).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

MIT Capstone Project Assignment 1 - Existing System Design

“FPU in 5”: The National Nuclear Security Administration (NNSA) and upper management at Lawrence Livermore National Lab (LLNL) have informally set a long-term goal of decreasing the development cycle of new systems to five years or less. The driver is to be able to respond to emerging situations which require new capabilities more quickly. There are numerous approaches to solve the problem, and any single improvement is likely insufficient. Our capstone project focuses on modernizing the design development processes, production development processes, and communication between design agencies (DAs) and production agencies (PAs) to decrease the timeline from conceptual study to first production unit. Our project’s system problem statement (SPS) is below: TO decrease the time from conceptual study to first production unit BY centralizing design development, production development, and information exchange USING digital engineering techniques.

42 ENGINEERING↗
DOE OSTI2023

(U) MIT Capstone Project Assignment 2: Proposed System Design

“First Production Unit (FPU) in 5”: The National Nuclear Security Administration (NNSA) and upper management at Lawrence Livermore National Lab (LLNL) have set a long-term goal of decreasing the development cycle of new systems to five years or less. The driver is to be able to respond to emerging situations which require new capabilities more quickly. There are numerous approaches to solve the problem, and any single improvement is likely insufficient. We analyzed a variety of possible solutions at varying levels of specificity as shown in Figure 1. We chose to focus our scope on the optimization of existing documentation processes because it is the least likely to add additional risk and can be accomplished with lower investment than other potential solutions.

42 ENGINEERING↗
DOE OSTI2023

Walking in his grandfather’s footsteps

During his August 11 visit to the Lab, Charles Oppenheimer participated in several events, and encountered a few surprises along the way Charles Oppenheimer never met his grandfather J. Robert Oppenheimer — the famed physicist died before Charles was born. But through family lore, popular narrative, and retracing his footsteps in Los Alamos, most recently on August 11, Charles knows this man well. Charles speaks on behalf of the Oppenheimer family, offering a perspective so many authors, filmmakers, and interviewers have forgotten to ask for. "The thing that stands out most is the family culture of being supportive of Robert Oppenheimer. It’s something I experienced as family culture … he had these really wide interests and was able to pursue them to his heart’s content," Charles said. During his visit Charles participated in a panel discussion with Department of Energy (DOE) Secretary Jennifer Granholm, DOE Under Secretary and National Nuclear Security Administration Administrator Jill Hruby, and Lab Director Thom Mason following a screening of an abbreviated version of the National Security Research Center’s (NSRC) newly-released documentary, “Oppenheimer: Science, mission, legacy.” He then toured the Bradbury Science Museum and his grandparent’s Los Alamos residence.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Preliminary Per- and Polyfluoroalkyl Substances Sampling Plan for Pantex Plant

Leidos prepared this Preliminary Per- and Polyfluoroalkyl Substances (PFAS) Sampling Plan for the U.S Department of Energy (DOE) Pantex Plant Consolidated Nuclear Security, LLC (CNS) Pantex, the operations and maintenance (O&M) contractor of Pantex Plant commissioned the Preliminary PFAS Sampling Plan to evaluate the potential risks at the facility and collect preliminary groundwater data at areas within the Plant with the highest potential for PFAS. This plan presents findings from research conducted to assess past and current use of materials containing PFAS and identify areas where these materials were potentially stored, handled, used, or released at Pantex Plant. Pantex Plant is located in Carson County in the Texas Panhandle (Figure 1-1).

54 ENVIRONMENTAL SCIENCES↗