Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modeling simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

A reactive transport model to simulate uranium immobilization through pH manipulation

Saprolite cores collected from around the former S-3 Ponds waste disposal site on the Oak Ridge Reservation in east Tennessee, USA, exhibit low pH and high concentrations of Al, Ca, Mg, Mn, various trace metals such as Ni and Co, and radionuclides such as U and Tc. Because uranium is one of the major contaminants of concern at the site, its behavior was of particular interest. The mobility of uranium depends highly on pH. Groundwater titration experiments showed that when pH was increased from 3.87 to 5.45 with addition of dissolved sodium hydroxide, concentration of aqueous uranium decreased from 50 ppm to less than 5 ppm. However, base additions to the sediments to increase pH are strongly buffered by various precipitation and sorption reactions. This study was undertaken to investigate the geochemical processes that control contaminant mobility and to develop a practical model to predict uranium immobilization under conditions where pH is manipulated for remediation of geochemically complex sites. The method of Spalding and Spalding was utilized to model soil buffer capacity by treating aquifer solids as a polyprotic acid. Aluminum precipitation and dissolution kinetics was included in HydroGeoChem v5.0 in addition to an equilibrium reaction model that considers aqueous complexation, precipitation, sorption and soil buffering with pH-dependent ion exchange capacity. The HydroGeoChem model was successfully utilized to simulate batch titration experiments and comparison of reactive transport model results with pH manipulation column experiments were in close agreement. The model was also calibrated to simulate acidic groundwater percolating through carbonate gravel at the site.

54 ENVIRONMENTAL SCIENCES↗

A new soil mixing layer model for simulating conservative solute loss from initially saturated soil to surface runoff

Surface water pollution due to solute loss from soil to surface runoff is a serious threat to the environment, and it is of great significance to predict the solute loss. While soil mixing layer theory has been widely used to predict the solute loss, it has been observed that the conventional soil mixing layer models with constant mixing layer depth underestimate solute concentration in surface runoff, and thus underestimate the solute loss after surface runoff starts. This study introduced a new soil mixing layer model with a new concept that the mixing layer depth increases downward with time after surface runoff occurs. This new concept was implemented by adding a mixing front between the soil mixing layer and its underlying soil layer, which is conceptually similar to the wetting front of soil infiltration given by the Green-Ampt equation. This is equivalent to treating the soil mixing layer as a deforming control volume. A mechanistic explanation for the new model was presented. This study also developed a closed form solution of the new model. The new model was evaluated by simulating five laboratory experiments conducted by two groups of researchers. The first two experiments have ponding water, and consider different drainage and runoff conditions at both early and late runoff times. The other three experiments do not have ponding water, and consider different infiltration conditions at the bottom of soil boxes. Simulation results of the five experiments show that the new model resolves the underestimation problem of conventional soil mixing layer models. The new model is subject to a total of six limits such as that the new model only considers conservative solute. Three limits are related to the assumptions used to derive the closed form solution, and they may be alleviated in a future research as briefly discussed at the end of the paper.

54 ENVIRONMENTAL SCIENCES↗

Cluster-dynamics-based parameterization for sulfuric acid–dimethylamine nucleation: comparison and selection through box and three-dimensional modeling

Clustering of gaseous sulfuric acid (SA) enhanced by dimethylamine (DMA) is a major mechanism for new particle formation (NPF) in polluted atmospheres. However, uncertainty remains regarding the SA–DMA nucleation parameterization that reasonably represents cluster dynamics and is applicable across various atmospheric conditions. This uncertainty hinders accurate three-dimensional (3-D) modeling of NPF and the subsequent assessment of its environmental and climatic impacts. Here we extensively compare different cluster-dynamics-based parameterizations for SA–DMA nucleation and identify the most reliable one through a combination of box model simulations, 3-D modeling, and in situ observations. Results show that the parameterization derived from Atmospheric Cluster Dynamic Code (ACDC) simulations, incorporating the latest theoretical insights (DLPNO-CCSD(T)/aug-cc-pVTZ//ωB97X-D/6-311++G(3df,3pd) level of theory) and adequate representation of cluster dynamics, exhibits dependable performance in 3-D NPF simulation for both winter and summer conditions in Beijing and shows promise for application in diverse atmospheric conditions. Another ACDC-derived parameterization, replacing the level of theory with RI-CC2/aug-cc-pV(T+d)Z//M06-2X/6–311++G(3df,3pd), also performs well in NPF modeling at relatively low temperatures around 280 K but exhibits limitations at higher temperatures due to inappropriate representation of SA–DMA cluster thermodynamics. Additionally, a previously reported parameterization incorporating simplifications is applicable for simulating NPF in polluted atmospheres but tends to overestimate particle formation rates under conditions of elevated temperature (>∼300 K) and low-condensation sink (<∼3×10 -3 s −1 ). Our findings highlight the applicability of the new ACDC-derived parameterization, which couples the latest SA–DMA nucleation theory and holistic cluster dynamics, in 3-D NPF modeling. The ACDC-derived parameterization framework provides a valuable reference for developing parameterizations for other nucleation systems.

Shen, Jiewen↗

Constructing a Simulation Surrogate with Partially Observed Output

Gaussian process surrogates are a popular alternative to directly using computationally expensive simulation models. When the simulation output consists of many responses, dimension-reduction techniques are often employed to construct these surrogates. However, surrogate methods with dimension reduction generally rely on complete output training data. This article proposes a new Gaussian process surrogate method that permits the use of partially observed output while remaining computationally efficient. The new method involves the imputation of missing values and the adjustment of the covariance matrix used for Gaussian process inference. The resulting surrogate represents the available responses, disregards the missing responses, and provides meaningful uncertainty quantification. In conclusion, the proposed approach is shown to offer sharper inference than alternatives in a simulation study and a case study where an energy density functional model that frequently returns incomplete output is calibrated.

42 ENGINEERING↗

EXAMINING SUBGRID MODELS OF SUPERMASSIVE BLACK HOLES IN COSMOLOGICAL SIMULATION

Although supermassive black holes (SMBHs) play an important role in galaxy and cluster evolution, at present they can only be included in large-scale cosmological simulation via subgrid techniques. However, these subgrid models have not been studied in a systematic fashion. Using a newly developed fast, parallel spherical overdensity halo finder built into the simulation code FLASH, we perform a suite of dark matter-only cosmological simulations to study the effects of subgrid model choice on relations between SMBH mass and dark matter halo mass and velocity dispersion. We examine three aspects of SMBH subgrid models: the choice of initial black hole seed mass, the test for merging two black holes, and the frequency of applying the subgrid model. We also examine the role that merging can play in determining the relations, ignoring the complicating effects of SMBH-driven accretion and feedback. We find that the choice of subgrid model can dramatically affect the black hole merger rate, the cosmic SMBH mass density, and the low-redshift relations to halo properties. We also find that it is possible to reproduce observations of the low-redshift relations without accretion and feedback, depending on the choice of subgrid model.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling and Simulating Blast Effects on Electric Substations

A software simulation tool was developed at the Idaho National Laboratory to estimate the fragility of electric substation components subject to an explosive blast. Damage caused by explosively driven fragments on a generic electric substation was estimated by using a ray-tracing technique to track and tabulate fragment impacts and penetrations of substation components. This technique is based on methods used for assessing vulnerability of military aircraft and ground vehicles to explosive blasts. An open-source rendering and ray-trace engine was used for geometric modeling and interactions between fragments and substation components. Semi-empirical material interactions models were used to calculate blast parameters and simulate high-velocity material interactions between explosively driven fragments and substation components. Finally, a Monte Carlo simulation was added to model the random nature of fragment generation allowing a skilled analyst to predict failure probabilities of substation components.

97 MATHEMATICS AND COMPUTING↗

Three-dimensional model of intracellular and intercellular Ca2+ waves propagation in endothelial cells

Highlights: • Image-based 3D simulation model for intercellular and intracellular Ca{sup 2+} waves. • Metabolic reactions were divided into membrane and cytoplasm domains. • Ca{sup 2+} and IP{sub 3} diffused across the cell and gap junctions. • Ca{sup 2+} waves are propagated from focal stimulated point in numerical simulation. • Ca{sup 2+} wave speed was in agreement with those from cell culture experiments. Intracellular and intercellular Ca{sup 2+} waves play key roles in cellular functions, and focal stimulation triggers Ca{sup 2+} wave propagation from stimulation points to neighboring cells, involving localized metabolism reactions and specific diffusion processes. Among these, inositol 1,4,5-trisphosphate (IP{sub 3}) is produced at membranes and diffuses into the cytoplasm to release Ca{sup 2+} from endoplasmic reticulum (ER). In this study, we developed a three-dimensional (3D) simulation model for intercellular and intracellular Ca{sup 2+} waves in endothelial cells (ECs). 3D model of 2 cells was reconstructed from confocal microscopic images and was connected via gap junctions. Cells have membrane and cytoplasm domains, and metabolic reactions were divided into each domain. Finally, the intracellular and intercellular Ca{sup 2+} wave propagations were induced using microscopic stimulation and were compared between numerical simulations and experiments. The experiments showed that initial sharp increases in intracellular Ca{sup 2+} occurred approximately 0.3 s after application of stimuli. In addition, Ca{sup 2+} wave speeds remained constant in cells, with intracellular and intercellular speeds of approximately 35 and 15 μm/s, respectively. Simulations indicated initial increases in Ca{sup 2+} concentrations at points of stimulation, and these were then propagated across stimulated and neighboring cells. In particular, initial rapid increases in intracellular Ca{sup 2+} were delayed and subsequent intracellular and intercellular Ca{sup 2+} wave speeds were approximately 25 and 12 μm/s, respectively. Simulation results were in agreement with those from cell culture experiments, indicating the utility of our 3D model for investigations of intracellular and intercellular messaging in ECs.

60 APPLIED LIFE SCIENCES↗

Conceptual and Mathematical Foundation for the FE/NETL CO 2 Prophet Model for Simulating CO 2 Enhanced Oil Recovery, Version 2

The United States (U.S.) Department of Energy (DOE) Office of Fossil Energy (FE) at the National Energy Technology Laboratory (NETL) has developed the FE/NETL CO 2 Prophet Model, which is Version 2 of CO 2 Prophet. This document describes the mathematical foundation for the FE/NETL CO 2 Prophet Model. CO 2 Prophet was originally developed in the 1990s by Texaco Exploration and Production and Technology Department for DOE. The FE/NETL CO 2 Prophet Model is an oil reservoir simulator that is suitable for simulating water floods and supercritical carbon dioxide (CO 2 ) enhanced oil recovery (EOR). The FE/NETL CO 2 Prophet Model uses a number of assumptions to simplify the equations describing the flow of oil, water (or brine), and CO 2 in the oil reservoir.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Combining geometric-optical and spectral invariants theories for modeling canopy fluorescence anisotropy

The spectral invariants theory ( p -theory) has received much attention in the field of quantitative remote sensing over the past few decades and has been adopted for modeling of canopy solar-induced chlorophyll fluorescence (SIF). However, the spectral invariant properties (SIP) in simple analytical formulae have not been applied for modeling canopy fluorescence anisotropy primarily because they are parameterized in terms of leaf total scattering, which precludes the differentiation between forward and backward leaf SIF emissions. In this study, we have developed the canopy-SIP SIF model by combining geometric-optical (GO) theory to account for asymmetric leaf SIF forward and backward emissions at the first-order scattering and by modeling multiple scattering based on the p-theory, thus avoiding the dependence on radiative transfer models. The applicability of the model simulations especially over 3D heterogeneous canopies was improved by incorporating canopy structure through multi-angular clumping index, and by modeling single scattering from the four components of the scene in view according to the GO approach. The results show good consistency with both the state-of-the-art SIF models and multi-angular field SIF observations over grass and chickpea canopies. Further, the coefficient of determination (R²) between the simulated SIF and field measurements was 0.75 (red) and 0.74 (far-red) for chickpea, and 0.65 (both red and far-red) for grass. The average relative error was approximately 3% for 1D homogeneous scenes when comparing the canopy-SIP SIF model simulations to the SCOPE model simulations, and around 4% for the 3D heterogeneous scene when comparing to the LESS model simulations. The results indicate that the proposed approach for separating asymmetric leaf SIF emissions is a robust way to keep a balance between satisfactory simulation accuracy and efficiency. Model simulations suggest that neglecting the leaf SIF asymmetry can lead to an underestimation of canopy red SIF by 6.3% to 42.6% for various leaf biochemical and canopy structural parameters. This study presents a simple but efficient analytical approach for canopy fluorescence modeling, with potential for large-scale canopy fluorescence simulations.

3D heterogeneous structure↗

Utilization of municipal wastewater for cooling in thermoelectric power plants

A process simulation model has been developed using Aspen Plus® with the OLI (OLI System, Inc.) water chemistry model to predict water quality in the recirculating cooling loop utilizing secondary- and tertiary-treated municipal wastewater as the source of makeup water. Simulation results were compared with pilot-scale experimental data on makeup water alkalinity, loop pH, and ammonia evaporation. The effects of various parameters including makeup water quality, salt formation, NH 3 and CO 2 evaporation mass transfer coefficients, heat load, and operating temperatures were investigated. The results indicate that, although the simulation model can capture the general trends in the loop pH, experimental data on the rates of salt precipitation in the system are needed for more accurate prediction of the loop pH. It was also found that stripping of ammonia and carbon dioxide in the cooling tower can influence the cooling loop pH significantly. The effects of the NH 3 mass transfer coefficient on cooling loop pH appear to be more significant at lower values (e.g., k NH3 < 4×10 -3 m/s) when the makeup water alkalinity is low (e.g., <90 mg/L as CaCO 3 ). The effect of the CO2 mass transfer coefficient was found to be significant only at lower alkalinity values (e.g., k CO2 <4×10 -6 m/s).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The earth system Grid : enabling access to multi-model climate simulation data.

Climate scientists face a wide variety of practical problems, but there is an overarching need to efficiently access and manipulate climate model data. Increasingly, for example, researchers must assemble and analyze large datasets that are archived in different formats on disparate platforms, and extract portions of datasets to compute statistical or diagnostic metrics 'in place'. The need for a common virtual environment in which to access both climate model datasets and analysis tools is therefore keenly felt. The software infrastructure to support such an environment must therefore not only provide ready access to climate data, but also must facilitate the use of visualization software, diagnostic algorithms, and related resources. To this end, the Earth System Grid Center for Enabling Technologies (ESG-CET) was established in 2006 by the Scientific Discovery through Advanced Computing (SciDAC)-2 program of the U.S. Department of Energy (DOE) through the Office of Advanced Scientific Computing Research (OASCR) and the Office Biological and Environmental Research (OBER) within the Office of Science (Fig. 1). ESG-CET is working to advance climate science by developing computational resources for accessing and managing model data that are physically located in distributed multiplatform archives.

54 ENVIRONMENTAL SCIENCES↗

A Global System for Transportation Simulation and Visualization in Emergency Evacuation Scenarios

Simulation-based studies are frequently used for evacuation planning and decision making processes. Given the transportation systems complexity and data availability, most evacuation simulation models focus on certain geographic areas. With routine improvement of OpenStreetMap road networks and LandScanTM global population distribution data, we present WWEE, a uniform system for world-wide emergency evacuation simulations. WWEE uses unified data structure for simulation inputs. It also integrates a super-node trip distribution model as the default simulation parameter to improve the system computational performance. Two levels of visualization tools are implemented for evacuation performance analysis, including link-based macroscopic visualization and vehicle-based microscopic visualization. For left-hand and right-hand traffic patterns in different countries, the authors propose a mirror technique to experiment with both scenarios without significantly changing traffic simulation models. Ten cities in US, Europe, Middle East, and Asia are modeled for demonstration. With default traffic simulation models for fast and easy-to-use evacuation estimation and visualization, WWEE also retains the capability of interactive operation for users to adopt customized traffic simulation models. For the first time, WWEE provides a unified platform for global evacuation researchers to estimate and visualize their strategies performance of transportation systems under evacuation scenarios.

Emergency Evacuation↗

Antarctic ice sheet model comparison with uncurated geological constraints shows that higher spatial resolution improves deglacial reconstructions

Accurately reconstructing past changes to the shape and volume of the Antarctic ice sheet relies on the use of physically based and thus internally consistent ice sheet modeling, benchmarked against spatially limited geologic data. The challenge in model benchmarking against geologic data is diagnosing whether model-data misfits are the result of an inadequate model, inherently noisy or biased geologic data, and/or incorrect association between modeled quantities and geologic observations. In this work we address this challenge by (i) the development and use of a new model-data evaluation framework applied to an uncurated data set of geologic constraints, and (ii) nested high-spatial-resolution modeling designed to test the hypothesis that model resolution is an important limitation in matching geologic data. While previous approaches to model benchmarking employed highly curated datasets, our approach applies an automated screening and quality control algorithm to an uncurated public dataset of geochronological observations (specifically, cosmogenic-nuclide exposure-age measurements from glacial deposits in ice-free areas). This optimizes data utilization by including more geological constraints, reduces potential interpretive bias, and allows unsupervised assimilation of new data as they are collected. We also incorporate a nested model framework in which high-resolution domains are downscaled from a continent-wide ice sheet model. We highlight the application of this framework by applying these methods to a small ensemble of deglacial ice-sheet model simulations, and demonstrate that the nested approach improves the ability of model simulations to match exposure age data collected from areas of complex topography and ice flow. We develop a range of diagnostic model-data comparison metrics to provide more insight into model performance than possible from a single-valued misfit statistic, showing that different metrics capture different aspects of ice sheet deflation.

Geosciences↗

Modeling and Simulations on Scattered Gamma-Ray Imaging without Collimator

Scattered radiation by Compton effect in emission imaging has been considered increasingly as active agent instead of being treated as noise and being rejected. In a recent proposal, scattered radiation emitted by the object under investigation and detected by a collimated gamma camera was shown to provide the capability to reconstruct the object in three dimensions. The acquisition of the scattered radiation with an uncollimated detector would enhance drastically sensitivity and resolution. This paper proposes a formal model for the image formation in this new imaging process. Monte-Carlo simulations validate the forward model and are used as data for numerical reconstruction.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Aggregation of Inverter-Based Resources for Modeling and Simulation

In order to conduct system dynamic studies, it is necessary to have dynamic models of both inverter and plant levels. Detailed and aggregated modeling approaches are two essential options. The detailed modeling method involves capturing the dynamic characteristics of each individual device (e.g., wind turbine or PV array), as well as their interconnections. However, as the scale of the IBR plant increases, the complexity and computation time required for detailed modeling also increase. On the other hand, aggregated modeling offers a more efficient way of representing large-scale IBRs in power system dynamic studies. This approach involves aggregating a large number of wind turbines, PV arrays, inverters, and/or plant controllers into one or a smaller number of equivalent models. In order to analyze the impact of a high-level IBR penetration in power systems, it is important to develop accurate and computationally efficient models for both the detailed and aggregated methods.

14 SOLAR ENERGY↗

Bayesian optimization for inverse calibration of expensive computer models: A case study for Johnson-Cook model in machining

Inverse model calibration for identifying the constitutive model parameters can be computationally demanding for expensive-to-evaluate simulation models. Here, this paper presents a modified Bayesian optimization (BO) method, denoted as BO-bound, that incorporates theoretical bounds on the quantity of interest. A case study for the inverse calibration of the Johnson Cook (J-C) flow stress model parameters is presented using machining (cutting) force data. The results show fast calibration of the five J-C parameters within 25 simulations. In general, the BO-bound method is applicable for inverse calibration of any expensive simulation models as well as optimization problems with known bounds.

Bayesian optimization↗

Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory

The metal laser powder bed fusion additive manufacturing process uses high power lasers to build parts layer upon layer by melting fine metal powders. Qualification of parts produced using this technology is broadly recognised as a significant challenge. Physics based process models have been identified as being foundational to qualification of additively manufactured metal parts. In the present article, a multiscale modelling strategy is described that will serve as the foundation upon which process control and part qualification can be built. This includes a model at the scale of the powder that simulates single track/single multilayer builds and provides powder bed and melt pool thermal data. A second model computationally builds a complete part and predicts manufactured properties (residual stress, dimensional accuracy) in three dimensions. Finally, modelling is tied to experiment through data mining.

36 MATERIALS SCIENCE↗

Modeling and Simulation of Pore Scale Multiphase Fluid Flow and Reactive Transport in Fractured and Porous Media

In the subsurface fluids play a critical role by transporting dissolved minerals, colloids and contaminants (sometimes over long distances), by mediating dissolution and precipitation processes and enabling chemical transformations in solution and at mineral surfaces. Although the complex geometries of fracture apertures, fracture networks and pore spaces may make it difficult to accurately predict fluid flow in saturated (single-phase) subsurface systems, well developed methods are available. The simulation of multiphase fluid flow in the subsurface is much more challenging because of the large density and/or viscosity ratios found in important applications (water/air in the vadose zone, water/oil, water/gas, gas/oil and water/oil/gas in oil reservoirs, water/air/non-aqueous phase liquids (NAPL) in contaminated vadose zone systems and gas/molten rock in volcanic systems, for example). In addition, the complex behavior of fluid-fluid-solid contact lines, and its impact on dynamic contact angles, must also be taken into account, and coupled with the fluid flow. Pore network models and simple statistical physics based models such as the invasion percolation and diffusion-limited aggregation models have been used quite extensively. However, these models for multiphase fluid flow are based on simplified models for pore space geometries and simplified physics. Other methods such a lattice Boltzmann and lattice gas models, molecular dynamics, Monte Carlo methods, and particle methods such as dissipative particle dynamics and smoothed particle hydrodynamics are based more firmly on first principles, and they do not require simplified pore and/or fracture geometries. However, they are less (in some cases very much less) computationally efficient that pore network and statistical physics models. Recently a combination of continuum computation fluid dynamics, fluid-fluid interface tracking or capturing and simple models for the dependence of contact angles on fluid velocity at the contact line has been used to simulate multiphase fluid flow in fracture apertures, fracture networks and pore spaces. Fundamental conservation principles - conservation of momentum, and conservation of mass (or conservation of volume for incompressible fluids) and conservation of energy, as well as symmetries (Galilean invariance and isotropy) are central to the physics of fluids and the models used to simulate them. In molecular and mesoscale models observance of these conservation principles and symmetries at the microscopic level leads to macroscopic fluid dynamics that can be represented by the Navier Stokes equation. The remarkable fact that the flow of all simpe fluids, irrespective of their chemical nature, can be described by the Navier-Stokes equation is a result of these conservation principles and symmetries acting on the molecular level.

99 GENERAL AND MISCELLANEOUS↗