Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Simulation of Deuterium Oxidation in a Room with a Fire

A series of experiments where deuterium was released in trace amounts into a room with a fire were performed at Sandia National Laboratories. This report describes the corresponding effort to model the test series using SIERRA/FUEGO. The objective of this modeling effort was to produce a simulation test matrix that can be utilized to help interpret the corresponding experiments and be used to assess the credibility of using the SIERRA/FUEGO simulations as a surrogate for real tritium reaction data for mock fire and release studies. The simulations assessed multiple configurations of fire size and location and overall found that there was low conversion of deuterium to oxidized deuterium. There are some notable differences between the simulation predictions and the experimental results, such as the simulations generally predicting higher amounts of deuterium conversion compared to the experiment. A strategy to address modeling uncertainties and unknowns is also given in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

The Cryptographic Obfuscation Sensor System Guarding Restricted Data (CrOSSGRD): Prototype Detailed Design Document

A prototype has been developed at Sandia National Laboratories to collect nominally sensitive data from a mock treaty accountable item, record that information as non-sensitive encrypted outputs, and allow inspectors to subsequently evaluate that information at a time and location of their choice without any risk of the host party’s data being inadvertently (or maliciously) revealed.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Microreactor Automated Control System - Digital Twin Models and Advanced Control Systems Updates

Automation of control systems is expected to be important in the economic and safe operation of microreactors. Therefore, there is a need to develop and demonstrate automated control for microreactors, along with the development of testbeds for this purpose. This report provides updates on the status of a nonnuclear microreactor automated control system (MACS)—a real-time, hardware-in-the-loop testbed for non-nuclear testing of microreactor control system automation. A real-time hardware-in-the-loop testbed incorporates the realistic dynamics of physical systems into control system development and testing. The collaborative effort between Oak Ridge National Laboratory (ORNL) and Idaho National Laboratory (INL) resulted in the development of a prototypic microreactor plant-level digital twin that includes the reactor and a balance of plant system. Advanced control strategies were incorporated to demonstrate testing of control automation solutions. The gRPC communication protocol, which was implemented in the hardware-in-the-loop testbed by INL, was coupled to a digital twin model developed using the TRANsient Simulation Framework of Reconfigurable Models (TRANSFORM) library in Modelica. This digital twin simulation was tested with the ViBRANT hardware for realistic feedback and visual representation of control action in real time. A modular Python client structure was developed to manage functional mock-up unit-based simulation and real-time gRPC communication. Hardware-in-the-loop testing indicated that the modeled reactor—a natural-convection, molten-salt coolant loop configuration—responds well to control of drum positioning for modulation of reactor core power, as well as system-level control and downstream demand changes. Ongoing research is focused on integrating additional control algorithms that utilize data from newly included sensors within the MACS hardware testbed, as well as demonstrating and assessing the performance of the different automated control algorithms on multiple additional operational scenarios.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Materials for Energy Management across the Electromagnetic Spectrum (MEMES) (LDRD Report)

Electrification of the United States has been a major driver of economic growth, powering industrialization, modern manufacturing, and the digital economy. Today, further economic and environmental benefits can be realized by improving the energy efficiency of the technologies we have come to rely on. This project focused on enhancing the energy efficiency of two cornerstone technologies of modern society: electronic displays and building climatization. While these two technologies operate in different parts of the electromagnetic spectrum (the visible and infrared, respectively), they share a common potential technological solution: electrically-driven displays that change reflectivity. In this work, we developed the first multipixel multicolor reflective display that achieves multi-colorization with fast-changing structural color. In the course of this demonstration, we quantified the structural changes that occur across different time and length scales and resolved device sealing issues, enabling operation of these devices over months (as opposed to days previously). We furthermore developed two reflectivity changing devices in the infrared and demonstrated how these technologies can be used to reduce climatization demands for both smart window and smart wall technologies. Implementing such a device in a scaled down mock room resulted in 10 degree Celsius change.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Toward Complete Merger Identification at Cosmic Noon with Deep Learning

As we enter the era of large imaging surveys such as Roman, Rubin, and Euclid, a deeper understanding of potential biases and selection effects in optical astronomical catalogs created with the use of ML-based methods is paramount. This work focuses on a deeper understanding of the performance and limitations of deep learning-based classifiers as tools for galaxy merger identification. We train a ConvNeXT-Pico model on mock HST CANDELS images from the IllustrisTNG50 simulation. Our focus is on a more challenging classification of galaxy mergers and non-mergers at higher redshifts 1 < z < 1.5, including minor mergers and lower mass galaxies down to the stellar mass of 108M⊙. We demonstrate, for the first time, that a deep learning model, such as the one developed in this work, can successfully identify even minor and low mass mergers even at these redshifts. Our model achieves overall accuracy, purity, and completeness of over 73%. We show that some galaxy mergers can only be identified from certain observation angles, leading to a potential upper limit in overall accuracy. Using Grad-CAMs and UMAPs, we more deeply examine the performance and observe a visible gradient in the latent space with stellar mass and specific star formation rate, but no visible gradient with merger mass ratio or merger stage.

Schechter, Aimee L. [U. Colorado, Boulder]↗
DOE OSTI2025

Simulation-Based Inference for Neutrino Interaction Model Parameter Tuning

High-energy physics experiments studying neutrinos rely heavily on simulations of their interactions with atomic nuclei. Limitations in the theoretical understanding of these interactions typically necessitate ad hoc tuning of simulation model parameters to data. Traditional tuning methods for neutrino experiments have largely relied on simple algorithms for numerical optimization. While adequate for the modest goals of initial efforts, the complexity of future neutrino tuning campaigns is expected to increase substantially, and new approaches will be needed to make progress. In this paper, we examine the application of simulation-based inference (SBI) to the neutrino interaction model tuning for the first time. Using a previous tuning study performed by the MicroBooNE experiment as a test case, we find that our SBI algorithm can correctly infer the tuned parameter values when confronted with a mock data set generated according to the MicroBooNE procedure. This initial proof-of-principle illustrates a promising new technique for next-generation simulation tuning campaigns for the neutrino experimental community.

Tame-Narvaez, Karla Maria [Fermilab]↗
DOE OSTI2025

WRPS Hanford Update [Slides]

The purpose of this report is to coordinate with the staff from WRPS, the current contract holder for operations at the Hanford site to better inform design decisions for the Autonomous systems for Hanford waste tank handling project. The project goals are to support risk reduction associated with monitoring, inspection and mapping of Hanford tank underground pits and includes: 1. A pit mock-up demonstration of Idaho National Laboratory’s (INL) Autonomous Pit Exploration System (APES) technology, which has two configurations: A. The Autonomous Robotic Arm, which is a proposed collaboration with Florida International University (FIU) and has capabilities to visually inspect, monitor, map and conduct simple tool manipulation tasks in the tank pits, and B. The robotic crawler configuration, which has capabilities to deploy to the bottom of the pits and conduct closer and bottom-up visual inspections. 2. An Implementation Plan that identifies Hanford site-wide application of the INL remote robotics technologies to enhance the performance of the tank farm systems and the characterization of the waste they contain to mitigate risk and optimize the overall waste mission. 3. A first-of-a-kind environmental digital twin will be produced. Digital twins to date require permanently installed sensors in order to produce asset specific predictions. This project will use the intermittent signals during inspections from deployed sensors on robotic systems to produce the data sets used by AI/ML to enable predictions of issues on tanks.

42 - ENGINEERING↗
DOE OSTI2026

First results from search for muon-neutrino disappearance at ICARUS

The ICARUS collaboration has completed a search for muon-neutrino disappearance in the context of the 3+1 sterile neutrino model using data collected with the Booster Neutrino Beam at Fermilab during 2022-2023 (ICARUS Run 2). Events are reconstructed with two different reconstruction frameworks and we select events with 1 muon, at least 1 proton, and no pions in the final state. A new fitting framework, called PROfit, was developed for this analysis and used for the final results presented here. As a single detector oscillation search this analysis is systematics limited, but the tools shown here will serve as a building block for future SBN searches where systematics will be constrained by the addition of a near detector. I will discuss the details of the analysis with a focus on the fitting framework, mock data studies, and the final fitting procedure during the data unboxing.

Larkin, Jacob [Rochester U.]↗
DOE OSTI2026

First results from search for muon-neutrino disappearance at ICARUS

The ICARUS collaboration has completed a search for muon-neutrino disappearance in the context of the 3+1 sterile neutrino model using data collected with the Booster Neutrino Beam at Fermilab during 2022-2023 (ICARUS Run 2). Events are reconstructed with two different reconstruction frameworks and we select events with 1 muon, at least 1 proton, and no pions in the final state. A new fitting framework, called PROfit, was developed for this analysis and used for the final results presented here. As a single detector oscillation search this analysis is systematics limited, but the tools shown here will serve as a building block for future SBN searches where systematics will be constrained by the addition of a near detector. I will discuss the details of the analysis with a focus on the fitting framework, mock data studies, and the final fitting procedure during the data unboxing.

Larkin, Jacob [Rochester U.]↗
DOE OSTI2026

Atmospheric Modeling and Denoising for Millimeter-Wave Line Intensity Mapping

Line-intensity mapping (LIM) offers a promising approach to mapping large-scale cosmic structure, and the greatest obstacle for ground-based observations at millimeter wavelengths is foreground contamination from atmospheric emission. In this work, we present a simulation and denoising framework designed to isolate and subtract atmospheric fluctuations from LIM data, modeled after the instrument parameters of the South Pole Telescope Summertime Line Intensity Mapper (SPT-SLIM). We generate mock observations spanning 125-175 GHz containing cosmic signals, precipitable water vapor screens, ice crystal fluctuations, and photon noise. We then implement a spatial-spectral atmospheric removal pipeline combining per-pixel linear template regression with a two-dimensional Fourier-domain filter. The framework is evaluated under simulated conditions in the South Pole and the Atacama Desert across three key metrics: cosmic signal preservation, foreground subtraction efficiency, and instrument noise injection. Our pipeline achieves atmospheric suppression at large spatial scales, and these results establish a physically grounded foundation for atmosphere removal in ground-based LIM data collection.

Saye, Laney [UC, Berkeley (main)] (ORCID:000900078↗
DOE OSTI2026

Integrative SP3 Workflow for Multi-PTM Proteomics Profiling (TZ-DP0)

The goal of the experiment was to demonstrate that the optimized multiplexed multi-PTM profiling workflow can comprehensively and quantitatively capture dynamic changes in protein abundance, cysteine oxidation, phosphorylation, and acetylation in cytokine-induced inflammatory stress in mouse pancreatic ß-cells. Global proteomic, redox proteomic, phosphoproteomic, and acetylomic were data collected from mouse Beta-TC-6 pancreatic Beta-cells, untreated (mock) and cytokine-treated Beta-cells at 4, 8, and 24 hours with 4 biological replicates. Samples were digested with trypsin and Lys-C, then analyzed by LC-MS/MS. Data were searched with MS-GF+, MASIC, and MaxQuant using PNNL's DMS processing pipeline.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Human Liver Epithelial Cells (HuH7) Response to HCoV-229E Infection Epigenomics (ATAC-Seq) (ACS-DP4)

The purpose of this experiment was to evaluate how wild-type Human coronavirus strain 229E (HCoV-299E) infection alters chromatin accessibility in infected cells. Sample data was obtained from mock-infected cells, UV-inactivated virus treated cells, and replication competent HCoV-229E infected immortalized human liver cells (HuH7) at 24 hours post infection. Samples were processed using ATAC-seq methods for reported bar coded libraries. Sample data was acquired using an Illumina Hi-Seq 2500 sequencer system and further processed for ATAC-Seq expression analysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Human Lung Fibroblast Response to HCoV-229E Infection, Top-down Proteomics of Histones (ACS-TZ-DP7)

The purpose of this experiment was to evaluate the human host cellular response to wild type human coronavirus strain 229E (HCoV-229E) infection, specifically how histones are modified following infection. Sample data was obtained from mock-infected and HCoV-229E-infected immortalized human lung fibroblasts (MRC-5) (MOI 3). Whole cell lysates were collected at 24 hours post infection and histones from all samples were enriched and were processed for proteoform identification analysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Human Lung Cellular Response to HCoV-229E Infection, Post-Translational Modification Proteomics Time Course (ACS-TZ-DP6)

The purpose of this experiment was to evaluate the human lung cellular response to wild type human coronavirus strain 229E (HCoV-229E) infection. Sample data was obtained for mock-infected and HCoV-229E infected immortalized human lung epithelial cells (A549) (MOI 3) and immortalized human lung fibroblasts (MRC-5) (MOI 3). Whole cell lysates were collected at 8, 16, and 24 hours post infection and were processed for post translational modification (PTM) proteomics analysis to determine the HCoV-229E phosphoproteome, redox proteome, and acetylation proteome.

Sims, Amy C [Pacific Northwest National Laboratory↗
DOE OSTI2021

Omics-Lethal Human Viruses, Influenza A Experiment IM103

The purpose of this experiment was to evaluate the host response to wild-type Influenza A/Vietnam/1203/2004 (H5N1; "VN1203") virus infection and mock infection. Sample data was obtained for mouse lung tissue and processed for mRNA, miRNA, proteomics, lipidomics, and metabolomics expression analysis. Secondary host-associated viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics, metabolomics, lipidomics, and transcriptomics dataset download each have a direct relationship to a primary sample submission corresponding to a specific Influenza A virus infection.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Human Host Cellular Response to HCoV-229E Infection Transcriptomics (ACS-DP1)

The purpose of this experiment was to evaluate the human host cellular response to wild-type Human coronavirus strain 229E (HCoV-229E) infection. Sample data was obtained for mock and infected immortalized human lung epithelial cells (A549) (MOI 5), immortalized human lung fibroblasts cells (MRC5) (MOI5), and primary human airway epithelial (HAE) (MOI 3) cells from lung tissue. Sample data was acquired using an Illumina HiSeq 2000 sequencer system and processed for RNA sequencing (RNA-Seq) expression analysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Human Host Cellular Response to HCoV-229E Infection Proteomics (ACS-JM-DP2)

The purpose of this experiment was to evaluate the human host cellular response to wild-type Human coronavirus strain 229E (HCoV-229E) infection. Sample data was obtained for mock and infected immortalized human lung epithelial cells (A549) (MOI 5) nuclear extracts, immortalized human lung fibroblasts cells (MRC5) (MOI5) nuclear extracts, and primary human airway epithelial (HAE) (MOI 3) cells from lung tissue and processed for proteome analysis. Processed datasets are openly accessible from the download button and contain secondary processed proteomic results files and supporting metadata materials. Experimental proteomics samples were prepared using Limited Proteolysis (LiP) methods for Label-free quantification (LFQ) and global proteomic evaluation. Sample data was acquired using a Q-Exactive HF-X mass spectrometer and was processed and compiled using MaxQuant software (v.1.6.17.0). Processed proteomic data downloads include a sample naming key, processed MaxQuant results/parameters, and protein annotated relative abundance files. See corresponding primary data accessions below and Viral Experiment LiP Analysis source code supporting data transparency and reuse. Experimental transcriptomics samples were collected in parallel and processed for RNA sequencing (RNA-Seq) as summarized under ACS-DP1 (https://data.pnnl.gov/group/nodes/dataset/34069).

59 BASIC BIOLOGICAL SCIENCES↗