Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A universal method to fabricating porous carbon for Li-O 2 battery

The main bottleneck in the application of biomass-based carbon material in energy field is the development of an economical, nanoscale controllable and universal fabrication method. Herein, we demonstrate that a biomass-derived carbon consisting of loose carbon nanosphere clusters could serve as an ideal cathode material for high performance Li-O 2 batteries. The carbon nanomaterial can be prepared from both biomass derivatives and crude biomass by a low cost, facile and nanoscale controllable method. The open slit-shaped hierarchical pore structure endows the electrode sufficient active surface sites and mass transport channels that are not easily asphyxiated by the discharge products. The concentration of oxygenic groups and structure defects on the surface of obtained carbon materials is very low, which minimizes the side reactions associated with carbon decomposition. Finally, the unique pore structure and surface properties of the carbon electrode give rise to a superhigh specific capacity of 20,300 mA h g -1 and an extremely long cycle life which a cyclic capacity retention of 100% is maintained for 543 cycles with current density of 0.2 mA cm -2 at controlled discharge-charge depths of 500 mA h g -1 .

25 ENERGY STORAGE↗
DOE OSTI2023

Task 12 PV Sustainability - Life Cycle Assessment of Crystalline Silicon Photovoltaic Module Delamination with Hot Knife Technology

The objective of this study is to complete a life cycle assessment (LCA) of a novel technology that separates the crystalline silicon (c-Si) photovoltaic (PV) module front glass from the backsheet using hot knife technology. This is known to be the most challenging step in module recycling, where the choice of delamination approach can determine the process selection for the next steps of the recycling process, the economic value of the recovered materials, and environmental performance. The life cycle inventory (LCI) reported here is based on primary data from the technology manufacturer. Different LCIs are established following the cut-off approach and the end-of-life (EOL) approach. The environmental impacts of the hot knife delamination process are analysed based on six indicators, and the main contributors to delamination efforts are identified. For the EOL approach, the potential environmental benefits from the recovered materials are compared to the environmental impacts caused by the delamination process. The functional unit of this analysis is the delamination of 1 kg of used framed c-Si PV modules at the place of installation.

14 SOLAR ENERGY↗
DOE OSTI2024

Coupled Gel/Seeded Growth of Cs2AgBiBr6 Single Crystals for Radiation Detection

Abstract— The all-inorganic lead free Cs2AgBiBr6 perovskite represents a highly promising environment-friendly radiation detector material. The first attempt to grow Cs2AgBiBr6 single crystals using the unique gel growth method is reported in this study. This technique enables controlled reagent diffusion in a gel medium at room temperature, fostering the growth of visible single crystals. It offers advantages over conventional methods, leading to fewer equilibrium and non-equilibrium defects and simplified execution. Interestingly, the as-grown crystals exhibited variations in size and colors within the gel matrix, indicating the influence of Bi solutes in Bi-poor and Bi-rich Cs2AgBiBr6 crystals. Once the crystals were confirmed by powder xray diffraction, a series of comprehensive material characterizations was performed. The resistivity of Cs2AgBiBr6 single crystals was measured at 1.12x107 Ω•cm. Trap density analysis yielded a value of 2.82 x1010 cm-3. The charge carrier mobility was determined to be 32.9 cm2V-1S-1, suggesting the suitability for radiation detector applications. Additional growth optimization is going on and further characterization will be reported during the presentation. Our work helps accelerate the development of lead-free perovskite materials toward radiation detector applications.

James, Ralph B.↗
DOE OSTI2021

Decoupling Complex Multi–Length–Scale Morphology in Non–Fullerene Photovoltaics with Nitrogen K–Edge Resonant Soft X–ray Scattering

Complex morphology in organic photovoltaics (OPVs) and other functional soft materials commonly dictates performance. Such complexity in OPVs originates from the mesoscale kinetically trapped non-equilibrium state, which governs device charge generation and transport. Resonant soft X-ray scattering (RSoXS) has been revolutionary in the exploration of OPV morphology in the past decade due to its chemical and orientation sensitivity. However, for non-fullerene OPVs, RSoXS analysis near the carbon K-edge is challenging, due to the chemical similarity of the materials used in active layers. Here, an innovative approach is provided by nitrogen K-edge RSoXS (NK-RSoXS), utilizing the spatial and orientational contrasts from the cyano groups in the acceptor materials, which allows for determination of phase separation. NK-RSoXS clearly visualizes the combined feature sizes in PM6:Y6 blends from crystallization and liquid-liquid demixing, while PM6:Y6:Y6-BO ternary blends with reduced phase-separation size and enhanced material crystallization can lead to current amplification in devices. Nitrogen is common in organic semiconductors and other soft materials, and the strong and directional N 1s → π* resonances make NK-RSoXS a powerful tool to uncover the mesoscale complexity and open opportunities to understand heterogeneous systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of Coating on the Electrochemical Performance of a Nickel-Rich Cathode Active Material

Due to their safety and high power density, one of the most promising types of all-solid-state lithium batteries is the one made with the argyrodite solid electrolyte (ASE). Although substantial efforts have been made toward the commercialization of this battery, it is still challenged by some technical issues. One of these issues is to prevent the side reactions at the interface of the ASE and the cathode active material (CAM). A solution to address this issue is to coat the CAM particles with a material that is compatible with both ASE and CAM. Prior studies show that the lithium niobate, LiNbO 3 , (LNO) is a promising material for coating CAM particles to reduce the interfacial side reactions. However, no systematic study is available in the literature to show the effect of coating LNO on CAM performance. This paper aims to quantify the effect of LNO coating on the electrochemical performance of a nickel-rich CAM. The electrochemical performance parameters that are studied are the capacity, cycling performance, and rate performance of the coated-CAM; and the effectiveness of the coating to prevent the side reactions at the ASE and CAM interface is out of the scope of this study. To eliminate the effect of side reactions at the ASE and CAM interface, we conduct all tests in the organic liquid electrolyte (OLE) cells to solely present the effect of coating on the CAM performance. For this purpose, 0.5 wt.% and 1 wt.% LNO are used to coat the LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-60) CAM through two synthesizing methods. Consequently, the effects of the synthesizing method and the coating weight percentage on the NMC-60 performance are presented.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Tuning the Co/Fe ratio in BaCo x Fe 0.8– x Zr 0.1 Y 0.1 O 3– δ , a promising triple ionic and electronic conducting oxide, to boost electrolysis and fuel cell performance

The triple conducting oxide BaCo 0.4 Fe 0.4 Zr 0.1 Y0.1O 3–δ (BCFZY4411), which accommodates simultaneous transport of protons, oxygen ions, and p-type electronic carriers, has been intensively investigated in recent years as a high-performance positive electrode material for fuel cell and electrolysis applications. The heavy Co and Fe-based transition metal doping in BCFZY4411 ensures adequate electrical conductivity while the multiple oxidation states of Co and Fe assist the electrocatalytic and redox ability. Despite the considerable role of Co and Fe transition metal doping in controlling electrochemical activity, however, the study of alternative BCFZY compositions with varying Co/Fe ratios has not yet been pursued. Here, we evaluate the electrochemical performance of a series of BaCo x Fe 0.8–x Zr 0.1 Y0.1O 3–δ compositions with varying Co/Fe ratio (x = 0.1, 0.2, 0.4, 0.6, 0.7) and use oxygen ion tracer diffusion and in situ high-temperature X-ray diffraction to investigate the effect of Co/Fe ratio on electrocatalytic activity, electronic conductivity, oxygen ion incorporation and transport kinetics, and thermomechanical behavior. We find that Co-rich BCFZY7111 yields the highest performance due to exceptionally high oxygen vacancy diffusion and shows a lower and more linear thermal expansion behavior compared to Fe-rich compositions. A protonic ceramic button cell incorporating a BCFZY7111 positive electrode yields a peak power density of 695 mW cm –2 under fuel cell mode and an electrolysis current density of 1976 mA cm –2 at 1.4 V at 600 °C, underscoring the promise of this new BCFZY electrode composition.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Artificial intelligence for materials research at extremes

Abstract Materials development is slow and expensive, taking decades from inception to fielding. For materials research at extremes, the situation is even more demanding, as the desired property combinations such as strength and oxidation resistance can have complex interactions. Here, we explore the role of AI and autonomous experimentation (AE) in the process of understanding and developing materials for extreme and coupled environments. AI is important in understanding materials under extremes due to the highly demanding and unique cases these environments represent. Materials are pushed to their limits in ways that, for example, equilibrium phase diagrams cannot describe. Often, multiple physical phenomena compete to determine the material response. Further, validation is often difficult or impossible. AI can help bridge these gaps, providing heuristic but valuable links between materials properties and performance under extreme conditions. We explore the potential advantages of AE along with decision strategies. In particular, we consider the problem of deciding between low-fidelity, inexpensive experiments and high-fidelity, expensive experiments. The cost of experiments is described in terms of the speed and throughput of automated experiments, contrasted with the human resources needed to execute manual experiments. We also consider the cost and benefits of modeling and simulation to further materials understanding, along with characterization of materials under extreme environments in the AE loop. Graphical abstract AI sequential decision-making methods for materials research: Active learning, which focuses on exploration by sampling uncertain regions, Bayesian and bandit optimization as well as reinforcement learning (RL), which trades off exploration of uncertain regions with exploitation of optimum function value. Bayesian and bandit optimization focus on finding the optimal value of the function at each step or cumulatively over the entire steps, respectively, whereas RL considers cumulative value of the labeling function, where the latter can change depending on the state of the system (blue, orange, or green).

36 MATERIALS SCIENCE↗
DOE OSTI2023

N-Doped carbon nanoparticles on highly porous carbon nanofiber electrodes for sodium ion batteries

Nitrogen doped carbon nanoparticles on highly porous carbon nanofiber electrodes were successfully synthesized via combining centrifugal spinning, chemical polymerization of pyrrole and a two-step heat treatment. Nanoparticle-on-nanofiber morphology with highly porous carbon nanotube like channels were observed from SEM and TEM images. Nitrogen doped carbon nanoparticles on highly porous carbon nanofiber (N-PCNF) electrodes exhibited excellent cycling and C-rate performance with a high reversible capacity of around 280 mA h g -1 in sodium ion batteries. Moreover, at 1000 mA g -1 , a high reversible capacity of 172 mA h g -1 was observed after 300 cycles. The superior electrochemical properties were attributed to a highly porous structure with enlarged d-spacings, enriched defects and active sites due to nitrogen doping. The electrochemical results prove that N-PCNF electrodes are promising electrode materials for high performance sodium ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Layered-rocksalt intergrown cathode for high-capacity zero-strain battery operation

Abstract The dependence on lithium-ion batteries leads to a pressing demand for advanced cathode materials. We demonstrate a new concept of layered-rocksalt intergrown structure that harnesses the combined figures of merit from each phase, including high capacity of layered and rocksalt phases, good kinetics of layered oxide and structural advantage of rocksalt. Based on this concept, lithium nickel ruthenium oxide of a main layered structure ( R $$\bar{3}$$ 3 ¯ m ) with intergrown rocksalt ( Fm $$\bar{3}$$ 3 ¯ m ) is developed, which delivers a high capacity with good rate performance. The interwoven rocksalt structure successfully prevents the anisotropic structural change that is typical for layered oxide, enabling a nearly zero-strain operation upon high-capacity cycling. Furthermore, a design principle is successfully extrapolated and experimentally verified in a series of compositions. Here, we show the success of such layered-rocksalt intergrown structure exemplifies a new battery electrode design concept and opens up a vast space of compositions to develop high-performance intergrown cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Triggering Anionic Redox Activity in Li 3 NbS 4 Through Cationic Disordering or Substitution

Extensive utilization of Li-ion batteries for varieties of applications necessitates ceaseless improvements of electrode materials for achieving higher energy density. Towards this goal, Li-rich layered oxides exhibiting high capacity due to cumulated cationic and anionic redox activities are under study for nearly a decade. Still, several unanswered questions remain with respect to these Li-driven anionic redox reactions in terms of the activation process and long-term consequences upon cycling. Here, the Li-rich Li 3 NbS 4 phase is focused, and synthesized as two different polymorphs, namely ordered and disordered phases. From analyses of their chemical and electrochemical properties, a crystal-electronic structure relationship is unraveled that triggers the anionic redox activity in these compounds. Moreover, through complementary theoretical calculations, the capability of cationic disorder to trigger anionic redox activity via the hybridization of cationic and non-bonding anionic energy levels is shown. This finding is further supported by the appearance of anionic redox activity by introducing the disorder through cationic substitution. Altogether, the insights derived here can help in designing new anionic redox materials with optimum performances for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Upcycling Polyethylene Waste Into Advanced Carbon Materials Used for Energy Storage Applications

Upcycling plastic into advanced carbons, such as graphite and graphene, offers attractive options to manage waste streams by converting the plastic into carbon electrode materials for energy storage devices. However, polyethylene (PE) is notoriously difficult to upcycle because it decomposes into light gases at approximately 350-400 °C which prevents processing it at higher temperatures to convert it into advanced carbons. This work addresses this challenge by oxidatively functionalizing PE between 300-330 C which stabilizes it for higher temperature processing into graphite & graphene. In addition, the graphite & graphene are tested as lithium-ion battery or supercapacitor electrodes where their electrochemical performances outperform commercial materials.

graphene↗
DOE OSTI2025

Upcycling Polyethylene Waste Into Advanced Carbon Materials Used for Energy Storage Applications

Upcycling plastic into advanced carbons, such as graphite and graphene, offers attractive options to manage waste streams by converting the plastic into carbon electrode materials for energy storage devices. However, polyethylene (PE) is notoriously difficult to upcycle because it decomposes into light gases at approximately 350-400 °C which prevents processing it at higher temperatures to convert it into advanced carbons. This work addresses this challenge by oxidatively functionalizing PE between 300-330 C which stabilizes it for higher temperature processing into graphite & graphene. In addition, the graphite & graphene are tested as lithium-ion battery or supercapacitor electrodes where their electrochemical performances outperform commercial materials.

graphene↗
DOE OSTI2024

Exploring the potential and impact of single-crystal active materials on dry-processed electrodes for high-performance lithium-ion batteries

Roll-to-roll powder-to-film dry processing (DP) and single-crystal (SC) active materials (AMs) with many advantages are two hot topics of lithium-ion batteries (LIBs). However, DP of SC AMs for LIBs is rarely reported. Consequently, the impact of SC AMs on dry-processed LIBs is not well understood. Herein, for the first time, via a set of experimental and theoretical studies of the conventional polycrystalline-AM- and SC-AM-based DPed electrodes (DPEs), this work not only reports a high-performance dry SC-AM cathode for LIB manufacturing, but also establishes some fundamental understanding of SC-based dry-processed electrodes, including their morphology, structure, mechanical strength, electronic conductivity and LIB electrochemical behavior. Further, the results suggest that DP of SC AMs is promising, which can dramatically improve the electrochemical kinetics at electrode level and particle level. Specifically, for the rate capability and long-term cyclability in full cells, SC DPEs exhibit a discharge specific capacity of 152.1 mAh g -1 at 1C and a capacity retention rate of 79.9 % at C/3 over 500 cycles, which are superior to those of PC DPEs (135.6 mAh g -1 and 68.3 %) at the same conditions and are further confirmed by the simulation data from the theoretical modelling study. Therefore, this comprehensive work marks a significant milestone for DP strategy and SC AMs, enlightening future research and development of LIB manufacturing.

25 ENERGY STORAGE↗
DOE OSTI2020

Experimental and Theoretical Studies of Ultrafast Vibrational Energy Transfer Dynamics in Energetic Materials

Energy transfer through anharmonically-coupled vibrations influences the earliest chemical steps in shockwave-induced detonation in energetic materials. A mechanistic description of vibrational energy transfer is therefore necessary to develop predictive models of energetic material behavior. We performed transient broadband infrared spectroscopy on hundreds of femtoseconds to hundreds of picosecond timescales as well as density functional theory and molecular dynamics simulations to investigate the evolution of vibrational energy distribution in thin film samples of pentaerythritol tetranitrate (PETN) , 1,3,5 - trinitroperhydro - 1,3,5 - triazine (RDX) , and 2,4,6 - triamino 1,3,5 - trinitrobenzene (TATB). Experimental results show dynamics on multiple timescales, providing strong evidence for coupled vibrations in these systems, as well as material-dependent evolution on tens to hundreds of picosecond timescales. Theoretical results also reveal pathways and distinct timescales for energy transfer through coupled vibrations in the three investigated materials, providing further insight into the mechanistic underpinnings of energy transfer dynamics in energetic material sensitivity.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Heavy-Duty Nonroad Material Handler Electrification Part 2: Energy Efficiency and Performance Evaluation

Decarbonization efforts achieved through electrification in nonroad mobile machinery can realize a reduction in fuel consumption of more than 20%, thanks to concepts familiar to light-duty passenger vehicles. This case study compares the results of a hybrid-electric material handler to its conventional counterpart, utilizing machine-specific drive cycles presented in part one of this paper series. The hybrid prototype features an extended-range electric vehicle (EREV) powertrain that demonstrated substantial energy efficiency improvements. Specifically, there was a reduction in equivalent fuel consumption of 75% when operating in electric-only mode, and 33% when maintaining the battery by charging with an on-board generator. Together, the efficiency improvements can be extrapolated over a low-intensity, 8-h shift characterized by significant idle time and highly dynamic engine load for a 47% reduction in net energy consumption. Key technologies that led to this improvement included engine downsizing and decoupling, regenerative braking, and an electrohydraulic pump unit with advanced controls. Finally, his study explains details of the powertrain architecture and subsystems that were implemented on a demonstration vehicle, control strategies used to meet project goals, and an analysis of energy consumption from testing on a closed course. Also included in this study is a discourse on comparison metrics that can be used for quantifying the energy consumption differences between hybrid-electric and conventional diesel powertrains in nonroad mobile machinery.

25 ENERGY STORAGE↗
DOE OSTI2020

Comparative study of Minnesota functionals performance on ferroelectric BaTiO 3 and PbTiO 3

Density functional theory based simulations are the leading tool for the computational investigation of ferroelectrics and the parametrization of their classical potentials. However, the predictions often depend strongly on the exchange correlation functional. The most popular choices, LDA and GGA, tend to underestimate or overestimate some structural, electric, and energy properties. These impede development of highly accurate classical potentials that extend the reach of first-principles simulations to finite temperatures and realistic sizes. In this work, we investigate the performance of recently developed Minnesota exchange correlation functionals on prototypical ferroelectrics BaTiO 3 , and PbTiO 3 , in comparison with some popular ones. We find that there exists strong correlation between predictions for some properties (tetragonality, phase energy difference, and polarization) by different functionals. Along the correlation line, we find a range of functionals (including some from the Minnesota suite) whose predictions fall in between those of LDA and GGA and, therefore, offer an improvement. A way to relatively rank functional performance with respect to chosen benchmarks is proposed and applied to identify the top performers for BaTiO 3 and PbTiO 3 . Here, the performance is found to be material dependent. Therefore, we propose that the performance assessment carried out in this work is employed to "screen" functionals prior to their use on ferroelectrics. Quick and computationally inexpensive, it is likely to lead to improved descriptions, especially for classical potential parametrization. The Minnesota functional suite is found to be suitable for this task.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Inspection of next-generation EUV resists with nano-projectile secondary ion mass spectrometry

There is a rapidly growing need for new materials for extreme ultraviolet (EUV) lithography, which incorporate high EUV absorbing elements. Hybrid resists, which are a combination of inorganic and organic moieties, are promising as they offer both high EUV sensitivity and high etch resistance. However, there is a glaring lack of methods to examine the uniformity of these important materials at the nanoscale. We examine the capabilities of nano-projectile secondary ion mass spectrometry (NP-SIMS) to investigate hybrid resists. NP-SIMS is a mass spectrometry-based technique with high lateral resolution. Using NP-SIMS, a surface is probed stochastically with a suite of individual projectiles, 10 6 to 10 7 in total, separated in time and space. Examining these individual mass spectra allows for nanoscale investigation of the uniformity of the surface. We evaluated the performance of NP-SIMS using samples of poly(methyl methacrylate) (PMMA) infiltrated with varying amounts of InO x via vapor-phase infiltration (VPI), an organic–inorganic hybridization method derived from atomic layer deposition. Here, we found that NP-SIMS measurements contained abundant characteristic ions related to both the PMMA and infiltrated In. The intensity of In atomic ions increased linearly with the number of infiltration cycles; however, the uniformity of In and PMMA varied with the number of infiltration cycles. After one cycle, we found that both the PMMA and In were relatively inhomogeneous. The homogeneity improved with subsequent infiltration cycles. In addition, NP-SIMS measurements contained characteristic ions related to the infiltration reaction and provided insights into the VPI mechanism. Overall, the results show that NP-SIMS is capable of examining both the inorganic and organic moieties in a hybrid resist and will be an important method for understanding the performance of these materials for use in EUV lithography.

36 MATERIALS SCIENCE↗