Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “malcolm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Spectroscopy and capacitance measurements of tunneling resonances in an Sb-implanted point contact.

We fabricated a split-gate defined point contact in a double gate enhancement mode Si-MOS device, and implanted Sb donor atoms using a self-aligned process. E-beam lithography in combination with a timed implant gives us excellent control over the placement of dopant atoms, and acts as a stepping stone to focused ion beam implantation of single donors. Our approach allows us considerable latitude in experimental design in-situ. We have identified two resonance conditions in the point contact conductance as a function of split gate voltage. Using tunneling spectroscopy, we probed their electronic structure as a function of temperature and magnetic field. We also determine the capacitive coupling between the resonant feature and several gates. Comparison between experimental values and extensive quasi-classical simulations constrain the location and energy of the resonant level. We discuss our results and how they may apply to resonant tunneling through a single donor.

99 GENERAL AND MISCELLANEOUS↗

Double quantum dot with tunable coupling in a Si MOS device with lateral geometry.

We report low-temperature transport measurements of a silicon metal-oxide-semiconductor (MOS) double quantum dot (DQD). In contrast to previously reported measurements of DQD's in Si MOS structures, our device has a lateral gate geometry very similar to that used by Petta et al. to demonstrate coherent manipulation of single electron spins. This gate design provides a high degree of tunability, allowing for independent control over individual dot occupation and tunnel barriers, as well as the ability to use nearby constrictions to sense dot charge occupation. Comparison of experimentally extracted capacitances between the dot and nearby gates with electrostatic modeling demonstrates the presence of disorder and the ability to partially compensate for this disorder by adjustment of gate voltages. We experimentally show gate-controlled tuning of the interdot coupling over a wide range of energies, an important step towards potential quantum computing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantum information processing : science & technology.

Qubits demonstrated using GaAs double quantum dots (DQD). The qubit basis states are the (1) singlet and (2) triplet stationary states. Long spin decoherence times in silicon spurs translation of GaAs qubit in to silicon. In the near term the goals are: (1) Develop surface gate enhancement mode double quantum dots (MOS & strained-Si/SiGe) to demonstrate few electrons and spin read-out and to examine impurity doped quantum-dots as an alternative architecture; (2) Use mobility, C-V, ESR, quantum dot performance & modeling to feedback and improve upon processing, this includes development of atomic precision fabrication at SNL; (3) Examine integrated electronics approaches to RF-SET; (4) Use combinations of numerical packages for multi-scale simulation of quantum dot systems (NEMO3D, EMT, TCAD, SPICE); and (5) Continue micro-architecture evaluation for different device and transport architectures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Theoretical Study of the Magnetic Structure of Bulk Iron with Radiation Defects

A fundamental understanding of the radiation damage effects in solids is of great importance in assisting the development of improved materials with ultra-high strength, toughness, and radiation resistance for nuclear energy applications. In this presentation, we show our recent theoretical investigation on the magnetic structure evolution of bulk iron in the region surrounding the radiation defects. We applied the locally self-consistent multiple scattering method (LSMS), a linear scaling ab-initio method based on density functional theory with local spin density approximation, to the study of the magnetic structure in a low energy cascade in a 10,000-atom sample for a series of time steps for the evolution of the defects. The primary damage state and the evolution of all defects in the sample were simulated using molecular dynamics with empirical, embedded-atom inter-atomic potentials. We also discuss the importance of thermal effect on the magnetic structure evolution.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Lateral conduction infrared photodetector

A photodetector for detecting infrared light in a wavelength range of 3-25 .mu.m is disclosed. The photodetector has a mesa structure formed from semiconductor layers which include a type-II superlattice formed of alternating layers of InAs and In.sub.xGa.sub.1-xSb with 0.ltoreq.x.ltoreq.0.5. Impurity doped regions are formed on sidewalls of the mesa structure to provide for a lateral conduction of photo-generated carriers which can provide an increased carrier mobility and a reduced surface recombination. An optional bias electrode can be used in the photodetector to control and vary a cut-off wavelength or a depletion width therein. The photodetector can be formed as a single-color or multi-color device, and can also be used to form a focal plane array which is compatible with conventional read-out integrated circuits.

47 OTHER INSTRUMENTATION↗

Reducing the environmental impact of uranium in-situ recovery.

This session will explore the current technical approaches to reducing the environmental effects of uranium ISR in comparison to the historical environmental impact of uranium mining to demonstrate advances in this controversial subject.

54 ENVIRONMENTAL SCIENCES↗

Bridging the gaps : joining information sources with Splunk.

Supercomputers are composed of many diverse components, operated at a variety of scales, and function as a coherent whole. The resulting logs are thus diverse in format, interrelated at multiple scales, and provide evidence of faults across subsystems. When combined with system configuration information, insights on both the downstream effects and upstream causes of events can be determined. However, difficulties in joining the data and expressing complex queries slow the speed at which actionable insights can be obtained. Effectively connecting data experts and data miners faces similar hurdles. This paper describes our experience with applying the Splunk log analysis tool as a vehicle to combine both data, and people. Splunk's search language, lookups, macros, and subsearches reduce hours of tedium to seconds of simplicity, and its tags, saved searches, and dashboards offer both operational insights and collaborative vehicles.

99 GENERAL AND MISCELLANEOUS↗

Geochemical engineering design tools for uranium in situ recovery : the HYDROGEOCHEM codes.

Geochemical Engineering Design (GED) is based on applications of the principles and various computer models that describe the biogeochemistry and physics of removal of contaminants from water by adsorption, precipitation and filtration. It can be used to optimize or evaluate the efficiency of all phases of in situ recovery (ISR). The primary tools of GED are reactive transport models; this talk describes the potential application of the HYDROGEOCHEM family of codes to ISR. The codes can describe a complete suite of equilibrium or kinetic aqueous complexation, adsorption-desorption, precipitation-dissolution, redox, and acid-base reactions in variably saturated media with density-dependent fluid flow. Applications to ISR are illustrated with simulations of (1) the effectiveness of a reactive barrier to prevent off-site uranium migration and (2) evaluation of the effect of sorption hysteresis on natural attenuation. In the first example, it can be seen that the apparent effectiveness of the barrier depends on monitoring location and that it changes over time. This is due to changes in pH, saturation of sorption sites, as well as the geometry of the flow field. The second simulation shows how sorption hysteresis leads to observable attenuation of a uranium contamination plume. Different sorption mechanisms including fast (or reversible), slow, and irreversible sorption were simulated. The migration of the dissolved and total uranium plumes for the different cases are compared and the simulations show that when 50-100% of the sites have slow desorption rates, the center of mass of the dissolved uranium plume begins to move upstream. This would correspond to the case in which the plume boundaries begin to shrink as required for demonstration of natural attenuation.

58 GEOSCIENCES↗

Structure, physical properties, and applications of SrRuO3 thin films

SrRuO{sub 3} is endowed with three remarkable features. First, it is a moderately correlated material that exhibits several novel physical properties; second, it permits the epitaxial growth of essentially single-crystal films; and third, because it is a good conductor, it has attracted interest as a conducting layer in epitaxial heterostructures with a variety of functional oxides. In this review, the present state of knowledge of SrRuO{sub 3} thin films is summarized. Their role as a model system for studying magnetism and electron transport characterized by intermediate electron correlation and large magnetocrystalline anisotropy is demonstrated. The materials science of SrRuO{sub 3} thin film growth is reviewed, and its relationship to electronic, magnetic, and other physical properties is discussed. Finally, it is argued that, despite all that has been learned, a comprehensive understanding of SrRuO{sub 3} is still lacking and challenges remain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light Curves

We combine the CfA3 supernovae Type Ia (SN Ia) sample with samples from the literature to calculate improved constraints on the dark energy equation of state parameter, w. The CfA3 sample is added to the Union set of Kowalski et al. to form the Constitution set and, combined with a BAO prior, produces 1 + w = 0.013{sub -0.068}{sup +0.066} (0.11 syst), consistent with the cosmological constant. The CfA3 addition makes the cosmologically useful sample of nearby SN Ia between 2.6 and 2.9 times larger than before, reducing the statistical uncertainty to the point where systematics play the largest role. We use four light-curve fitters to test for systematic differences: SALT, SALT2, MLCS2k2 (R{sub V} = 3.1), and MLCS2k2 (R{sub V} = 1.7). SALT produces high-redshift Hubble residuals with systematic trends versus color and larger scatter than MLCS2k2. MLCS2k2 overestimates the intrinsic luminosity of SN Ia with 0.7 < {Delta} < 1.2. MLCS2k2 with R{sub V} = 3.1 overestimates host-galaxy extinction while R{sub V} {approx} 1.7 does not. Our investigation is consistent with no Hubble bubble. We also find that, after light-curve correction, SN Ia in Scd/Sd/Irr hosts are intrinsically fainter than those in E/S0 hosts by 2{sigma}, suggesting that they may come from different populations. We also find that SN Ia in Scd/Sd/Irr hosts have low scatter (0.1 mag) and reddening. Current systematic errors can be reduced by improving SN Ia photometric accuracy, by including the CfA3 sample to retrain light-curve fitters, by combining optical SN Ia photometry with near-infrared photometry to understand host-galaxy extinction, and by determining if different environments give rise to different intrinsic SN Ia luminosity after correction for light-curve shape and color.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On specification of initial conditions in turbulence models

Recent research has shown that initial conditions have a significant influence on the evolution of a flow towards turbulence. This important finding offers a unique opportunity for turbulence control, but also raises the question of how to properly specify initial conditions in turbulence models. We study this problem in the context of the Rayleigh-Taylor instability. The Rayleigh-Taylor instability is an interfacial fluid instability that leads to turbulence and turbulent mixing. It occurs when a light fluid is accelerated in to a heavy fluid because of misalignment between density and pressure gradients. The Rayleigh-Taylor instability plays a key role in a wide variety of natural and man-made flows ranging from supernovae to the implosion phase of Inertial Confinement Fusion (ICF). Our approach consists of providing the turbulence models with a predicted profile of its key variables at the appropriate time in accordance to the initial conditions of the problem.

42 ENGINEERING↗

Research needs for material mixing at extremes: workshop overview & charge

Workshop goals are: (1) Raise the general awareness of material mixing problems in extreme conditions; (2) Peer into the future (15 years) for mixing experiments/diagnostics, theory/modeling and simulation/predictions in relation to material mixing; (3) Identify priority research directions, capability opportunities (especially with respect to MaRIE), and projected capability needs (not just MaRIE); and (4) The production of a MaRIE report, a peer reviewed journal paper, and a proposal for a decadal study. The last 25 years has seen substantial progress with understanding material mixing in low energy environments, particularly with the development of high fidelity experimental multi-probe diagnostics, direct numerical simulations, and science based theories and mathematical models. We now need to move such advances to the high energy environment with a goal to increase our understanding and predictability, and raise our confidence in scientifically informed decision making. Thus, this workshop is charged to look to the future ({approx} 15 years), and explore opportunities to advance our current understanding of material mixing in extreme conditions.

99 GENERAL AND MISCELLANEOUS↗