Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linear response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electric Field Analysis in a Cold-Ion Source Using Stark Spectroscopy of Rydberg Atoms

Here, we analyze electric fields in ion sources generated by quasicontinuous photoionization of cold Rb atoms trapped in the focal spot of a near-concentric, in-vacuum cavity for 1064-nm laser light. Ion streams are extracted with an external electric field, F. Stark effects of Rb 57F and of nearby high-angular-momentum Rydberg levels, which exhibit large, linear Stark shifts, are employed to study the net electric-field probability distribution within the ion-source region over an extraction-field range of 0 < F < 0.35 V/cm. For F = 0, we also investigate ion-field-induced Stark spectra of the 60P 1/2 state, which exhibits a (lesser) quadratic electric-field response that affords a simplified electric-field analysis. Experimental Rydberg spectra are compared with theoretical Stark spectra, which are weighted with net electric-field distributions obtained from classical ion-trajectory simulations that include Coulomb interactions. Experiments and models are in good agreement. At small F and high ion-source rates, the field approximately follows a Holtsmark distribution, and the ion streams are degraded by the Coulomb microfields. With increasing F and at lower ion-source rates, the fields become narrowly distributed around F, resulting in directional ion streams that are less degraded by microfields. Our results are of interest for monitoring cold-ion sources for focused-ion-beam applications, where Coulomb interactions are of concern, and for studies of electric fields in cold plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Optimal multifrequency weighting for CMB lensing

We report that extragalactic foregrounds in cosmic microwave background (CMB) temperature maps lead to significant biases in CMB lensing reconstruction if not properly accounted for. Combinations of multifrequency data have been used to minimize the overall map variance (internal linear combination, or ILC), or specifically null a given foreground, but these are not tailored to CMB lensing. In this paper, we derive an optimal multifrequency combination to jointly minimize CMB lensing noise and bias. We focus on the standard lensing quadratic estimator, as well as the "shear-only"and source-hardened estimators, whose responses to foregrounds differ. We show that an optimal multifrequency combination is a compromise between the ILC and joint deprojection, which nulls the thermal Sunyaev-Zel'dovich (tSZ) and cosmic infrared background (CIB) contributions. In particular, for a Simons Observatory-like experiment with ℓ max,T =3000, we find that profile hardening alone (with the standard ILC) reduces the bias to the lensing power amplitude by 40%, at a 20% cost in noise, while the bias to the cross-correlation with a LSST-like sample is reduced by nearly an order of magnitude at a 10% noise cost, relative to the standard quadratic estimator. With a small amount of joint deprojection the bias to the profile hardened estimator can be further reduced to less than half the statistical uncertainty on the respective amplitudes, at a 20% and 5% noise cost for the auto- and cross-correlation respectively, relative to the profile hardened estimator with the standard ILC weights. Finally, we explore possible improvements with more aggressive masking and varying ℓ max,T .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Direct Measurement of Helicoid Surface States in RhSi Using Nonlinear Optics

Despite the fundamental nature of the edge state in topological physics, direct measurement of electronic and optical properties of the Fermi arcs of topological semimetals has posed a significant experimental challenge, as their response is often overwhelmed by the metallic bulk. However, laser-driven currents carried by surface and bulk states can propagate in different directions in nonsymmorphic crystals, allowing for the two components to be easily separated. Motivated by a recent theoretical prediction G. Chang et al., Phys. Rev. Lett. 124, 166404 (2020), we have measured the linear and circular photogalvanic effect currents deriving from the Fermi arcs of the nonsymmorphic, chiral Weyl semimetal RhSi over the 0.45-1.1 eV incident photon energy range. Our data are in good agreement with the predicted spectral shape of the circular photogalvanic effect as a function of photon energy, although the direction of the surface photocurrent departed from the theoretical expectation over the energy range studied. In conclusion, surface currents arising from the linear photogalvanic effect were observed as well, with the unexpected result that only two of the six allowed tensor element were required to describe the measurements, suggesting an approximate emergent mirror symmetry inconsistent with the space group of the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

CHARACTERIZATION OF RADIATION DAMAGES TO POSITRON SOURCE MATERIALS

The secondary beam production target at future positron sources at the Continuous Electron Beam Accelerator Facility (CEBAF), the International Linear Collider (ILC) or the Future Circular Collider (FCC), features unprecedented mechanical and thermal stresses which may compromise sustainable and reliable operation. Candidate materials are required to possess high melting temperature together with excellent thermal conductivity, elasticity and radiation hardness properties. In order to substantiate the material choice for the CEBAF and ILC positron sources, the response of candidate materials such as titanium alloys, tungsten, and tantalum to electron beam irradiation was experimentally investigated. CEBAF and ILC expected operating conditions were mimicked using the 3.5 MeV electron beam of the MAMI facility injector. The material degradations were precisely analyzed via high energy X-ray diffraction at the HEMS beamline operated by the Helmholtz-Zentrum Hereon at the PETRA III synchrotron facility. This work reports the results of these measurements and their interpretation.

Lengler, T.↗
DOE OSTI2022

Dryness controls temperature-optimized gross primary productivity across vegetation types

Temperature response of gross primary productivity (GPP) is a well-known property of ecosystem, but GPP at the optimum temperature (GPP_T opt ) has not been fully discussed. Our understanding of how GPP_T opt responds to warming and water availability is highly limited. Here, in this study, we analyzed data at 326 globally distributed eddy covariance sites (79°N-37°S), to identify controlling factors of GPP_T opt . Although GPP_T opt was significantly influenced by soil moisture, global solar radiation, mean annual temperature, and vapor pressure deficit in a non-linear pattern (R 2 = 0.47), the direction and magnitude of these climate variables’ effects on GPP_T opt depend on the dryness index (DI), a ratio of potential evapotranspiration to precipitation. The spatial pattern showed that soil moisture did not affect GPP_T opt across energy-limited sites with DI < 1 while dominated GPP_T opt across water-limited sites with DI >1. The temporal pattern showed that GPP_T opt was lowered by warming or low precipitation in water-limited sites while energy-limited sites tended to maintain a stable GPP_T opt regardless of changes in air temperature. Vegetation types in humid climates tended to have higher GPP_T opt and were more likely to benefit from a warmer climate since it was not restricted by water conditions. This study highlights that the response of GPP_T opt to global warming depends on the dryness conditions, which explains the nonlinear control of water and temperature over GPP_T opt . Our finding is essential to realistic prediction of terrestrial carbon uptake under future climate and vegetation conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Deep-freeze graph training for latent learning

Scientific and engineering advances are primarily driven by multi-tier conceptual constructs and conditional theoretical frameworks. The theories allow predictions of hypothetical system responses, given a set of approximate conditions (ranges of applicability) imposed on latent parameters that cannot be measured directly. Learning to estimate the latent variables (Latent Learning) helps to pinpoint the anticipated range-edge anomalies and improves the confidence in interpretation, interpolation and extrapolation of limited experimental data. Due to high dimensionality and extreme non-linearity of the materials science problems, very large datasets are typically required for conventional data-driven model development. The vital experimental data collection, particularly on microstructural phases, is very challenging, which makes it difficult to compile a high-quality database. Incorporation of the domain knowledge into the computational graph structure, initialization and optimization processes presents a viable mechanism for developing accurate models, with limited datasets. Furthermore, this study successfully utilized the approach to build the Deep Freeze Graph (DeepFreG) by mapping known causality relationships and by digitizing empirical domain knowledge for Latent Learning (LL), with specific applications in materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetostriction and damping of forced vibrations in Fe-Mo single and polycrystal alloys

Magnetostriction and damping of forced vibrations in Fe-Mo single and polycrystal alloys is studied and analyzed with respect to existing approaches and experimental data. In this work, our data suggest that a more complex dependence (compared with linear dependence predicted by Smith and Birchak) between damping capacity and magnetostriction takes place for this and possibly other Fe-based ferromagnetic alloys. We believe that more factors related to the structural changes, brought about by the additions (elements added to Fe), which can affect phase stability as well as magnetic and electric contributions influencing property response, should be considered to provide a better correlation between the magnetic and magnetomechanical characteristics of this alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphology and property tuning in ZnO–Ni hybrid metamaterials in vertically aligned nanocomposite (VAN) form

ZnO thin films have attracted significant interest in the past decades owing to their unique wide band gap properties, piezoelectric properties, non-linearity and plasmonic properties. Recent efforts have been made in coupling ZnO with secondary phases to enhance its functionalities, such as Au–ZnO nanocomposite thin films with tunable optical and plasmonic properties. In this work, magnetic nanostructures of Ni are incorporated in ZnO thin films in a vertically aligned nanocomposite (VAN) form to couple magnetic and plasmonic response in a complex hybrid metamaterial system. Nickel (Ni) is of interest due to its ferromagnetic and plasmonic properties along with gold (Au) which is also plasmonic. Therefore, two approaches, namely, tuning of the deposition pressure and use of a ZnO–Au seeding layer have been attempted to achieve unique Ni nanostructures in addition to tuning of the microstructure. Together, both approaches demonstrate a range of microstructures such as core–shell, nanodisk, nanocup, and nanocube-like morphologies not previously attempted. Additionally, there is effective tuning of properties. Specifically, the seeding layer thickness causes hyperbolic behavior as well as redshift in the surface plasmon resonance (SPR) wavelength. The addition of the ZnO–Au seeding layer directly influences the optical properties. Plus, regardless of the different approaches, the films demonstrate magnetic anisotropy based on the composition and microstructure of the film which impacted the saturation magnetization and coercivity. This study demonstrates the potential of ZnO-based complex hybrid metamaterials with coupled electro-magneto-optical properties for integrated photonic devices.

Bhatt, Nirali A. [Purdue Univ., West Lafayette, IN↗
DOE OSTI2025

Snap-Through Buckling Pressure Prediction of Spherical Caps: A Comparison of Analytical, Implicit, and Explicit Methods

Snap-through buckling is a nonlinear and dynamic instability that occurs in curved shell structures such as domes, pressure vessels, and aerospace panels. Unlike classical linear buckling, it involves a sudden transition between equilibrium states caused by geometric nonlinearity and rapid strain-to-kinetic energy conversion (Timoshenko & Gere, 1961; Budiansky & Roth, 1962). This study investigates the snap-through behavior of thin spherical caps using both implicit and explicit solvers in ANSYS Workbench. While implicit analysis accurately captures quasi-static response, it struggles with convergence near instability. In contrast, explicit LS-DYNA simulation naturally handles the nonlinear dynamic event with minimal tuning and computational cost.

42 ENGINEERING↗
DOE OSTI2022

Development of A Multi-Spectral Pyrometry Sensor for High-Speed Transient Surface-Temperature Measurements in Combustion-Relevant Harsh Environments

Accurate and high-speed transient surface-temperature measurements of combustion devices including internal combustion (IC) engines, gas turbines, etc., provide validation targets and boundary conditions for computational fluid dynamics models, and are broadly relevant to technology advancements such as performance improvement and emissions reduction. Development and demonstration of a multi-infrared-channel pyrometry-based optical instrument for high-speed surface-temperature measurement is described. The measurement principle is based on multi-spectral radiation thermometry (MRT) and uses surface thermal radiation at four discrete spectral regions and a corresponding emissivity model to obtain surface temperature via non-linear least squares (NLLS) optimization. Rules of thumb for specifying the spectral regions and considerations to avoid interference with common combustion products are developed; the impact of these along with linear and non-linear MRT analysis are assessed as a function of temperature and signal-to-noise ratio. A multi-start method to determine the MRT-solution global optimum is described and demonstrated. The resulting multi-channel transient pyrometry instrument is described along with practical considerations including optical-alignment drift, matching intra-channel transient response, and solution-confidence indicators. The instrument demonstrated excellent >97% accuracy and >99% 2-sigma precision over the 400–800 °C range, with ~20 µs (50 kHz, equivalent to 0.2 cad at 2000 RPM IC-engine operation) transient response in the bench validation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Electrodynamics of Thin Sheets of Twisted Material

We construct a minimal theory describing the optical activity of a thin sheet of a twisted material, the simplest example of which is twisted bilayer graphene. We introduce the notion of "twisted electrical conductivity", which parametrizes the parity-odd response of a thin film to a perpendicularly falling electromagnetic waves with wavelength larger than the thickness of the sheet. Here, we show that the low-frequency Faraday rotation angle has different behaviors in different phases. For an insulator, the Faraday angle behaves as ω 2 at low frequencies, with the coefficient being determined by the linear relationship between a component of the electric quadrupole moment and the external electric field. For superconductors, the Faraday rotation angle is constant when the frequency of the incoming EM waves is below the superconducting gap and is determined by the coefficient of the Lifshitz invariant in the Ginzburg-Landau functional describing the superconducting state. In the metallic state, we show that the twisted conductivity is proportional to the "magnetic helicity" (scalar product of the velocity and the magnetic moment) of the quasiparticle, averaged around the Fermi surface. The theory is general and is applicable to strongly correlated phases.

Son, Dam Thanh↗
DOE OSTI2021

Detection of the Metabolic Response to Drought Stress Using Hyperspectral Reflectance

Drought is the most important limitation on crop yield. Understanding and detecting drought stress in crops is vital for improving water use efficiency through effective breeding and management. Leaf reflectance spectroscopy offers a rapid, non-destructive alternative to traditional techniques for measuring plant traits involved in a drought response. We measured drought stress in six glasshouse-grown agronomic species using physiological, biochemical and spectral data. In contrast to physiological traits, leaf metabolite concentrations revealed drought stress before it was visible to the naked eye. We used full-spectrum leaf reflectance data to predict metabolite concentrations using partial least-squares regression, with validation R2 values of 0.49 to 0.87. We show for the first time that spectroscopy may be used for the quantitative estimation of proline and abscisic acid, demonstrating the first use of hyperspectral data to detect a phytohormone. We used linear discriminant analysis and partial least squares discriminant analysis to differentiate between droughted and watered plants based on measured traits (accuracy: 71%) and raw spectral data (66%). Finally, we validated our glasshouse-developed models in an independent field trial. We demonstrate that spectroscopy can detect drought stress via underlying biochemical changes, before visual differences occur, representing a powerful advance for measuring limitations on yield.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Interference-Limited Absorption in Dense Molecular Nanolayers Near Reflecting Surfaces

We investigate linear resonant absorption by a dense ensemble of molecules confined to a sub-wavelength layer in two geometries: (i) a free-standing film in a homogeneous space and (ii) the same film placed at a controlled distance from a reflecting surface. In both cases, increasing the effective light–matter coupling (via molecular density/oscillator strength) produces a nonmonotonic response: absorption rises to an optimum and then decreases as the film becomes increasingly radiatively bright and reflective. Finite-difference time-domain simulations and analytical transfer-matrix calculations agree quantitatively and yield compact ridge conditions for the optimum. We interpret the trends using a scattering/port picture: the isolated film is a symmetric two-port system (reflection and transmission), which bounds single-sided resonant absorption to ≤50% in the ultrathin limit (reflecting transition saturation), whereas adding a mirror suppresses transmission and converts the structure into an effectively one-port absorber. In the mirror-backed geometry, interference can cancel reflection, and unity absorption is obtained at critical coupling, when radiative leakage is balanced by intrinsic molecular loss. These results clarify fundamental limits and design rules for collective absorption in dense molecular layers near dielectric or metallic boundaries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Effect of the SEI Layer Mechanical Deformation on the Passivity of a Si Anode in Organic Carbonate Electrolytes

The solid electrolyte interphase (SEI) on a Si negative electrode in carbonate-based organic electrolytes shows intrinsically poor passivating behavior, giving rise to unsatisfactory calendar life of Li-ion batteries. Moreover, mechanical strains induced in the SEI due to large volume changes of Si during charge-discharge cycling could contribute to its mechanical instability and poor passivating behavior. This study elucidates the influence that static mechanical deformation of the SEI has on the rate of unwanted parasitic reactions at the Si/electrolyte interface as a function of electrode potential. Further, the experimental approach involves the utilization of Si thin-film electrodes on substrates with disparate elastic moduli, which either permit or suppress the SEI deformation in response to Si volume changes upon charging-discharging. We find that static mechanical stretching and deformation of the SEI results in an increased parasitic electrolyte reduction current on Si. Furthermore, attenuated total reflection and near-field Fourier-transform infrared nanospectroscopy reveal that the static mechanical stretching and deformation of the SEI fosters a selective transport of linear carbonate solvent through, and nanoconfinement within, the SEI. These, in turn, promote selective solvent reduction and continuous electrolyte decomposition on Si electrodes, reducing the calendar life of Si anode-based Li-ion batteries. Finally, possible correlations between the structure and chemical composition of the SEI layer and its mechanical and chemical resilience under prolonged mechanical deformation are discussed in detail.

25 ENERGY STORAGE↗
DOE OSTI2023

Polarization-controlled volatile ferroelectric and capacitive switching in Sn 2 P 2 S 6

Abstract Smart electronic circuits that support neuromorphic computing on the hardware level necessitate materials with memristive, memcapacitive, and neuromorphic- like functional properties; in short, the electronic response must depend on the voltage history, thus enabling learning algorithms. Here we demonstrate volatile ferroelectric switching of Sn 2 P 2 S 6 at room temperature and see that initial polarization orientation strongly determines the properties of polarization switching. In particular, polarization switching hysteresis is strongly imprinted by the original polarization state, shifting the regions of non-linearity toward zero-bias. As a corollary, polarization switching also enables effective capacitive switching, approaching the sought-after regime of memcapacitance. Landau–Ginzburg–Devonshire simulations demonstrate that one mechanism by which polarization can control the shape of the hysteresis loop is the existence of charged domain walls (DWs) decorating the periphery of the repolarization nucleus. These walls oppose the growth of the switched domain and favor back-switching, thus creating a scenario of controlled volatile ferroelectric switching. Although the measurements were carried out with single crystals, prospectively volatile polarization switching can be tuned by tailoring sample thickness, DW mobility and electric fields, paving way to non-linear dielectric properties for smart electronic circuits.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Software Verification and Validation Guidelines for Non-Linear Soil-Structure Interaction Analysis

Seismic analysis of structures, systems, and components (SSCs), including the consideration of soil-structure interaction (SSI) effects, is an important and required step in the design and licensing of nuclear power plant SSCs important to safety. Historically, the SSI analysis of nuclear structures has been performed using equivalent linear methods. However, there has been considerable industry investment in alternative seismic design and analysis approaches to reduce the construction cost of new reactors. Toward that goal and in alignment with the Licensing Modernization Project (LMP) framework, the Nuclear Regulatory Commission (US NRC) has proposed a risk-informed, performance-based approach to seismic design that allows inelastic response in those nuclear plant structures not required for confinement. As a complementary effort, reactor designers are exploring nonlinear seismic analysis methods to optimize structural designs and reduce construction costs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

SPRUCE Surface N2O fluxes measured with LI-7820, 2024

This dataset contains N2O (nitrous oxide) efflux rates measurements from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. Measurements were made manually with a LiCor N2O/H2O analyzer (LI-7820) and paired SmartChamber (LI-8200-01S) in June, August, and October (2024-06-24 to 2024-10-22). During each measurement, the SmartChamber was placed on 8” PVC collars that were installed in May 2024. N2O flux was derived from 10-minute flux measurements processed using SoilFluxPro software (v5.3.1) and fit to a linear model. Model slope and R2 are reported along with soil water, soil temperature, and air temperature observations made with SmartChamber sensors. N2O is a gaseous N species formed during the microbial processes of denitrification and ammonia oxidation, and is a powerful greenhouse gas. This dataset contains one data file in comma-separate values (*.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗