Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Microstructure evolution of gadolinium doped cerium oxide under large thermal gradients

In this report the effects of large thermal gradient annealing on the microstructure of 10 mol% gadolinium doped ceria (GDC) were investigated. GDC powder was prepared by solvent deficient method and sintered at 1650 °C for 10 h to achieve dense ceramics with ~8 μm grain size. The densified GDC samples were subsequently annealed using a 60 W infrared laser at over 2100 °C for 1 h under a thermal gradient equivalent to ~0.3–0.5 °C/μm. The post-annealed samples at 2150 °C for 1 h exhibit grains with average length and width of 37 and 28 μm, respectively. Electron backscattered diffraction (EBSD) analysis revealed that the post-annealed sample at 2150 °C consists of grains oriented close to five principal directions (<4 3 10>, <0 0 1> and <13 1 14> on [0 0 1], and <7 6 20> and <7 2 7> on [0 1 0]) within a tolerance angle of ±10°, whereas the grains of the pre-annealed sample are randomly oriented. Gadolinium diffuses 20–30 μm away from the irradiated surface, with the measured composition of regions deeper than 30 μm, Ce 0.86 Gd 0.14 O 1.93 , is close to that of the pre-annealed sample, Ce 0.87 Gd 0.13 O 1.94 . Enhancement of total conductivity of the post-annealed GDC (1.1 × 10 -3 S cm -1 at 500 °C, and 2.1 × 10 -2 S cm -1 at 700 °C) is observed when compared to the pre-annealed GDC (3.1 × 10 -5 S cm -1 at 500 °C, and 1.7 × 10 -3 S cm -1 at 700 °C), and points to the decrease in the grain boundary (GB) resistivity. This could be attributed to both the change in GB area and grain alignment.

36 MATERIALS SCIENCE↗

A gradient-based optimization approach for the detection of partially connected surfaces using vibration tests

The integrity of engineering structures is often compromised by embedded surfaces that result from incomplete bonding during the manufacturing process, or initiation of damage from fatigue or impact processes. Examples include delaminations in composite materials, incomplete weld bonds when joining two components, and internal crack planes that may form when a structure is damaged. In many cases the areas of the structure in question may not be easily accessible, thus precluding the direct assessment of structural integrity. In this paper, we present a gradient-based, partial differential equation (PDE)-constrained optimization approach for solving the inverse problem of interface detection in the context of steady-state dynamics. An objective function is defined that represents the difference between the model predictions of structural response at a set of spatial locations, and the experimentally measured responses. One of the contributions of our work is a novel representation of the design variables using a density field that takes values in the range [0, 1] and raised to an integer exponent that promotes solutions to be near the extrema of the range. The density field is combined with the penalty method for enforcing a zero gap condition and realizing partially bonded surfaces. Furthermore the use of the penalty method with a density field representation leads to objective functions that are continuously differentiable with respect to the unknown parameters, enabling the use of efficient gradient-based optimization algorithms. Numerical examples of delaminated plates are presented to demonstrate the feasibility of the approach.

42 ENGINEERING↗

Using taxa-based approaches to delineate stream macroinvertebrate assemblage responses to stressor gradients in modified alluvial agroecosystems

Alluvial plain landscapes are some of the most agriculturally productive lands in the world but often have modified stream ecosystems due to cultivation history. This context requires consideration when establishing water quality management goals. We analyzed state water quality databases to demonstrate that Mississippi Alluvial Plain (MAP) ecoregion streams have elevated specific conductivity (SC) and nutrients and lower macroinvertebrate local and regional taxa pools compared to streams in other ecoregions, potentially reducing the efficacy of traditional biomonitoring approaches within the region. To overcome these challenges, we used threshold indicator taxa analysis (TITAN) to compare macroinvertebrate assemblage responses to water quality gradients among ecoregions in Mississippi. We identified individual taxa and assemblage-level responses to increasing water quality degradation in MAP streams. Observed responses occurred at higher concentrations for SC, total organic carbon (TOC) and total phosphorus (TP), but not total nitrogen (TN) relative to other ecoregions. These responses appeared to be driven by a large proportion of indicator taxa considered tolerant or unresponsive in other ecoregions, responding negatively to increasing water quality stressors in MAP streams. Our observed assemblage-level stressor responses to WQ gradients in MAP streams demonstrate shifting tolerance in highly altered ecosystems may require adjustments to recovery expectations but also provide useful measures for monitoring improvements in regional water quality. For example, our observed macroinvertebrate assemblage response to increasing TP identified a management goal similar to guidance based on distributional analysis of water quality data within the MAP ecoregion (0.11 vs 0.128 mg L –1 ) and thus provide some biological basis for previously identified nutrient goals for the region. Our approach can guide and monitor success of nutrient reduction efforts in MAP watersheds and other alluvial plain agroecosystems where reference conditions do not exist, and local and regional taxa pools are less diverse and may not support full recovery of ecological assemblages. While our results are promising, they should also be compared with more sensitive and less habitat-limited biological assemblages (e.g., algae or bacteria) to better understand complex ecological responses to best management practices designed to increase sustainability of high production agricultural regions.

59 BASIC BIOLOGICAL SCIENCES↗

Experimental study on tribrachial flames in narrow channels with small fuel concentration gradients

Edge flames have become a subject of interest as basic structures for lifted-flame stabilization and turbulent flame propagation. Recently, with the development of small diffusion flame devices as energy sources for various small mechanical systems, edge flames within narrow spaces have also been investigated. In this study, the structures and propagation characteristics of a tribrachial flame (or an edge flame) in a confined narrow channel, with very small fuel concentration gradients, were experimentally investigated. Tribrachial flames could be successfully stabilized in the narrow channels. The flame shapes and propagation velocities were compared by changing the four experimental parameters of the mean velocity, fuel concentration gradient, channel gap, and fuel dilution ratio. It was experimentally observed that the luminosity of the diffusion branch diminished when the channel gap decreased. It was also found that there is a critical condition in the channel gap for maximum propagation velocity. A flow redirection effect and a heat loss effect are thought to have played a key role in the variation of the PVTF in a narrow channel, and their competition with each other caused a peak value of the PVTF at the critical channel gap. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interlocked optimization and fast gradient algorithm for a seismic inverse problem

Highlights: {yields} A 2D extension of the 1D nonlinear inversion of well-seismic data is given. {yields} Appropriate regularization yields a well-determined large scale inverse problem. {yields} An interlocked optimization loop acts as an efficient preconditioner. {yields} The adjoint state method is used to compute the misfit function gradient. {yields} Domain decomposition method yields an efficient parallel implementation. - Abstract: We give a nonlinear inverse method for seismic data recorded in a well from sources at several offsets from the borehole in a 2D acoustic framework. Given the velocity field, approximate values of the impedance are recovered. This is a 2D extension of the 1D inversion of vertical seismic profiles . The inverse problem generates a large scale undetermined ill-conditioned problem. Appropriate regularization terms render the problem well-determined. An interlocked optimization algorithm yields an efficient preconditioning. A gradient algorithm based on the adjoint state method and domain decomposition gives a fast parallel numerical method. For a realistic test case, convergence is attained in an acceptable time with 128 processors.

97 MATHEMATICS AND COMPUTING↗

Accurate gradient approximation for complex interface problems in 3D by an improved coupling interface method

Most elliptic interface solvers become complicated for complex interface problems at those “exceptional points” where there are not enough neighboring interior points for high order interpolation. Such complication increases especially in three dimensions. Usually, the solvers are thus reduced to low order accuracy. In this paper, we classify these exceptional points and propose two recipes to maintain order of accuracy there, aiming at improving the previous coupling interface method [26]. Yet the idea is also applicable to other interface solvers. The main idea is to have at least first order approximations for second order derivatives at those exceptional points. Recipe 1 is to use the finite difference approximation for the second order derivatives at a nearby interior grid point, whenever this is possible. Recipe 2 is to flip domain signatures and introduce a ghost state so that a second-order method can be applied. This ghost state is a smooth extension of the solution at the exceptional point from the other side of the interface. The original state is recovered by a post-processing using nearby states and jump conditions. The choice of recipes is determined by a classification scheme of the exceptional points. The method renders the solution and its gradient uniformly second-order accurate in the entire computed domain. Numerical examples are provided to illustrate the second order accuracy of the presently proposed method in approximating the gradients of the original states for some complex interfaces which we had tested previous in two and three dimensions, and a real molecule ( (1D63)) which is double-helix shape and composed of hundreds of atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Benchmarking optimization methods for materials research: Gradient descent and Bayesian optimization for lithium-ion battery aging diagnostics

Accurate and efficient parameter estimation is essential for battery diagnostics and aging analysis. Here, in this study, we compare two optimization-based approaches—gradient descent and Bayesian optimization—for extracting parameters from differential voltage analysis in lithium-ion batteries. While these techniques are widely used, their relative strengths and limitations for this application are not well understood. The study evaluates the trade-offs between these methods in terms of result quality, computational cost, and reliability within this specific application. The diagnostic results from our battery data suggest adopting gradient descent as an initial method for rapid and efficient analysis, while employing more stable optimization techniques, such as Bayesian optimization, as a verification step to mitigate potential instability. Comparing the two methods provides information on algorithmic choice, while inspiring further discussions on selecting appropriate techniques for specific research tasks.

Zhao, Ziqing [Boston Univ., MA (United States)] (O↗

The plastic flow machining: A new SPD process for producing metal sheets with gradient structures

Highlights: • A new process named Plastic Flow Machining is presented to produce thin sheets by an extrusion operation from bulk material. • The produced sheets present ultra-fine grain structures, good mechanical properties and high formability. • A deformation gradient was found across the thickness of the sheet regarding plastic strain, microstructure and texture. - Abstract: A new severe plastic deformation process is presented – the plastic flow machining – an extrusion process during which a sheet is formed through a lateral opening of the die in a single operation. The sheet is heavily deformed presenting an ultra-fine grain structure. Experimental results are presented for commercially pure aluminum concerning microstructures, textures and mechanical properties. A gradient structure was found across the thickness of the sheet concerning plastic strain, grain size and texture. Only simple shear textures were seen. The material strength increased by a factor of three with significant ductility and with relatively high Lankford parameter.

36 MATERIALS SCIENCE↗

Crystallographic texture gradient along the wall thickness of an SF-copper tube

Metallic tubes usually show heterogeneities along circumference and through wall thickness. Local texture analysis by synchrotron diffraction and global texture analysis by neutron diffraction was used describing texture variations related to the wall thickness. Test sample was an SF-Cu tube with outer diameter of 140 mm and an average wall thickness of 10 mm. The texture is dominated by the cube component {001} <100>. Other minor components are rotated cube {013} <100>, Goss {011} <100>, Cu {112} <111>, brass {110} <112>, S {123} <634>. The texture gradient over the wall thickness shows a remarkable variation of the sharpness of the cube component. Other components show only little variation. Comparing samples obtained at maximum wall thickness and at minimum wall thickness one can see that the wall thickness has an influence on the global texture as well as texture gradient. Another interesting result is, that global textures measured directly by neutrons and averaged global textures, calculated from the set of local measurements by synchrotron diffraction, agree surprisingly well despite their different resolution.

36 MATERIALS SCIENCE↗

The effect of carbon contents on intragranular ferrite formed in the V-Ti-N microalloyed steel with a carbon content gradient prepared by controlling the surface decarburization

Highlights: • A method for quick preparation of steels with different carbon contents was provided. • A steel containing carbon in gradient was obtained through surface decarburization. • The effect of carbon contents on IGF nucleation was studied with the new method. - Abstract: The V-Ti-N microalloyed steel with a carbon content gradient was innovatively obtained through surface decarburization. Then, the effect of carbon contents on intragranular ferrite (IGF) formation was studied. With the carbon contents increasing from 0.39% to 0.47% (mass percent), the volume fraction of IGF decreases from 8.2% to 4.6%, but the number of IGF has no significant change. The critical size of IGF nuclei was calculated on the basis of classic heterogeneous nucleation theory. According to the results of calculation and statistics, with the carbon content increasing from 0.39% to 0.47%, the number of IGF nuclei does not decrease significantly. When the carbon content is relatively low, some (Ti, V)(C, N) particles precipitating in austenite matrix may also act as the nuclei of IGF to refine the pearlite-ferrite microstructure.

36 MATERIALS SCIENCE↗

Synthesis and electrochemical performance of LiNi{sub 0.7}Co{sub 0.15}Mn{sub 0.15}O{sub 2} as gradient cathode material for lithium batteries

Highlights: ► The gradient precursors Ni{sub 0.7}Co{sub 0.15}Mn{sub 0.15}(OH){sub 2} is prepared by hydroxide co-precipitating. ► The cathode materials is synthesized by mixing the precursor with 5% excess LiOH·H{sub 2}O. ► The XRD results show that cathode materials present layered α-NaFeO{sub 2} typical crystal. ► Material sintered at 850 °C shows the best performance, with high-capacity and recyclability. -- Abstract: LiNi{sub 0.7}Co{sub 0.15}Mn{sub 0.15}O{sub 2} as a cathode material for lithium batteries was synthesized by mixing hydroxide co-precipitated precursors with 5% excess LiOH·H{sub 2}O. Its structural and electrochemical properties were investigated using X-ray diffractometry, scanning electron microscopy, galvanostatic charge–discharge test, and electrochemical impedance spectroscopy. The results indicated that well-ordering layered LiNi{sub 0.7}Co{sub 0.15}Mn{sub 0.15}O{sub 2} cathode materials were successfully prepared in air at 750, 800, and 850°C with α-NaFeO{sub 2} typical crystal. The results of charge–discharge test demonstrated that the gradient cathode material sintered at 850 °C exhibited the best electrochemical performance with the initial discharge capacity of 164 mA h g{sup −1} at 0.2 C and lower electrochemical impedance. Nickel has low price. LiNiO{sub 2} cathode materials have high specific capacity, their theoretical capacity is 274 mA h g{sup −1} and with low self-discharge rate. So the Ni, Co, Mn ternary layer-structural compounds with high Ni content are showing to be promising cathode materials for lithium batteries. The techniques and research results in this paper are utilizable for the study of this kind of lithium battery materials.

36 MATERIALS SCIENCE↗

Electric-field-controlled optical switch using Kerr effect and gradient of the composition ratio Nb/(Ta + Nb)

Highlights: • An abnormal laser deflection phenomenon in KTN crystals is demonstrated. • The origin of the deflection phenomenon was discussed in detail. • By exploiting the deflection, we have designed an optical switch. • The g{sub 11}/g{sub 12} ratio (>10), wavelength range(491–1064 nm), and I–V characteristics (0–800 V) were studied. • The extinction ratio (0–1) and influence of the photorefractive effect were studied. - Abstract: By exploiting the Kerr effect and the gradient of the composition ratio m, Nb/(Ta + Nb) in mol%, in KTa{sub 1−x}Nb{sub x}O{sub 3} (KTN) crystals, we have designed an electric-field-controlled optical switch. The operating principle of the switch is described. During the switching process, the incident linearly polarized beam is orthogonally deflected as it propagates through the crystals. The g{sub 11}/g{sub 12} ratio (>10), wavelength range (491–1064 nm), I–V characteristics (0–800 V), extinction ratio (0–1), gradient of Curie temperature (21–22.9 °C), response time that may be in ns order, and influence of the photorefractive effect were studied. The results show that our design provides a new kind of optical switch with macro scale (mm order), adjustable extinction ratio (0–1), wide wavelength range (491–1064 nm).

36 MATERIALS SCIENCE↗

One-pot ternary sequential reactions for photopatterned gradient multimaterials

Seamless multimaterial construction is a common motif in animal physiology. Such continuous mechanical gradients remain challenging to reproduce in engineered systems, as current resin chemistries typically result in a single fixed set of properties. As an alternative to single-property materials, we introduce a thiol-ene-epoxy-based photothermal reaction scheme that produces multimaterials by altering the polymer microstructure within a single resin. In this system, the photodosage during the first stage of processing dictates the extent of conversion for each subsequent reaction. As a result, our photochemistry can exhibit a diverse range of soft (Young’s modulus, E ~ 400 kPa; elongation, dL/L0 ~ 300%) and stiff (E ~ 1.6 GPa; dL/L 0 ~ 3%) mechanical properties. Furthermore, we pattern photostable and mechanically robust modulus gradients (d[E r, stiff /E r , soft] /dx > 1,000 mm -1 ) that exceed those found in squid beaks and human knee entheses. We demonstrate the ability to build intricate multimaterial architectures including a soft, wearable braille display.

36 MATERIALS SCIENCE↗

Stabilizing Ni-rich layered cathode for high-voltage operation through hierarchically heterogeneous doping with concentration gradient

High-nickel LiNi x Mn y Co 1-x-y O 2 (NMC) cathodes have demonstrated superior energy density, yet their stability is compromised under high voltage conditions. To address this, here we propose a strategy of heterogeneous doping with a concentration gradient, specifically through Sr–Zr co-modification. We synthesized Ni-rich NMC particles featuring several micron-sized secondary particles composed of micron-sized primary grains. This design aims to harness the structural robustness of single-crystalline grains and the favorable diffusion kinetics of polycrystalline secondary particles. Systematic characterization using a combination of electrochemical measurements and synchrotron analytics reveals an intriguing pattern of hierarchically heterogeneous Sr–Zr co-doping. It demonstrates a depth-dependent concentration gradient at the secondary particle level and competing dopant segregation over the buried grain boundaries. This unique characteristic creates opportunities for enhancing battery performance, particularly by optimizing precursors and implementing advanced modulation techniques. We also investigate the dissolution and precipitation of the cathode's transition metal cations upon high-voltage cycling. These insights suggest that a tailored compositional variation can be a viable approach to effectively design the next-generation high-Ni NMC cathode materials for high-voltage lithium batteries.

36 MATERIALS SCIENCE↗

Operation of a high-gradient superconducting radio-frequency cavity with a non-evaporable getter pump

The use of non-evaporable getter (NEG) pumps in particle accelerators has increased significantly over the past few years because of their large pumping speed, particularly for hydrogen, compared to the size of the pump. A concern about using such pumps in superconducting radio-frequency (SRF) accelerators is the possibility of shedding particulates which could then migrate into the SRF cavities and produce field emission, therefore degrading the cavity performance. One option to mitigate such issue is to use sintered getter materials which intrinsically offer superior mechanical and particle retention properties. In this article we present the results from cryogenic RF tests of a high-gradient SRF cavity after being evacuated several times with an NEG pump equipped with sintered getter disks and placed in close proximity to the cavity. Here, the results showed that the cavity performance was not affected by the pump up to the quench gradient of 34 MV/m. As a result of this study, two such NEG pumps have been installed next to a cryomodule in the CEBAF accelerator to maintain ultra-high vacuum in the SRF cryomodule and two adjacent warm girder sections.

43 PARTICLE ACCELERATORS↗

Advances in high gradient normal conducting accelerator structures

Here, this paper reviews the current state-of-the-art in understanding the phenomena of ultra-high vacuum radio-frequency (rf) breakdown in accelerating structures and the efforts to improve stable operation of the structures at accelerating gradients above 100 MV/m. Numerous studies have been conducted recently with the goal of understanding the dependence of the achievable accelerating gradients and breakdown rates on the frequency of operations, the geometry of the structure, material and method of fabrication, and operational temperature. Tests have been conducted with single standing wave accelerator cells as well as with the multi-cell traveling wave structures. Notable theoretical effort was directed at understanding the physical mechanisms of the rf breakdown and its statistical behavior. Finally, the achievements presented in this paper are the result of the large continuous self-sustaining collaboration of multiple research institutions in the United States and worldwide.

43 PARTICLE ACCELERATORS↗

Variation in peatland porewater chemistry over time and space along a bog to fen gradient

Porewater chemistry is an integrative measure of the physical, chemical, and biological processes occurring within peatland ecosystems, and therefore some chemistry measures (e.g., pH, calcium concentrations) have been used to classify bog vs fen peatlands. However, porewater sampling is often limited in spatial and temporal resolution, highlighting the need for a more comprehensive analysis of spatiotemporal variation in porewater chemistry. We examined depth profiles of porewater chemistry in four nearby peatlands that fall along a bog to rich fen gradient in northcentral Minnesota, USA. Porewater was sampled ~monthly during one ice-free season from three replicate piezometer nests per peatland to quantify temporal and spatial variability of those depth profiles. Porewater depth profiles of pH, calcium and total organic carbon concentrations, and δ 18 O-H 2 O varied along the bog to fen gradient, but total nitrogen and total phosphorus concentrations did not. Porewater chemistry was similar in the bogs and poor fen which were all quite different from the rich fen. In contrast, temporal and spatial variation in porewater chemistry, quantified using coefficients of variation, did not differ between bogs and fens despite the hypothesis that variation in porewater chemistry would be lower in fens than bogs due to the perennial throughput of large volumes of discharging groundwater in the rich fen. Spatial and temporal variability in porewater chemistry across all peatland types highlights the importance of collecting porewater samples in multiples over time in both near-surface and deeper peats. Furthermore, this variation can be important when scaling findings to the peatland scale, assessing the representativeness of peatlands within a larger landscape, and understanding variability in solute export to downstream ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Screening tool to evaluate the vulnerability of down-gradient receptors to groundwater contaminants from uncapped landfills

Highlights: • A spreadsheet-based risk screening tool for groundwater affected by landfills is presented. • Domenico solute transport equations are used to estimate downgradient contaminant concentrations. • Landfills are categorized as presenting high, moderate or low risks. • Analysis of parameter sensitivity and examples of the method’s application are given. • The method has value to regulators and those considering redeveloping closed landfills. - Abstract: A screening tool for quantifying levels of concern for contaminants detected in monitoring wells on or near landfills to down-gradient receptors (streams, wetlands and residential lots) was developed and evaluated. The tool uses Quick Domenico Multi-scenario (QDM), a spreadsheet implementation of Domenico-based solute transport, to estimate concentrations of contaminants reaching receptors under steady-state conditions from a constant-strength source. Unlike most other available Domenico-based model applications, QDM calculates the time for down-gradient contaminant concentrations to approach steady state and appropriate dispersivity values, and allows for up to fifty simulations on a single spreadsheet. Sensitivity of QDM solutions to critical model parameters was quantified. The screening tool uses QDM results to categorize landfills as having high, moderate and low levels of concern, based on contaminant concentrations reaching receptors relative to regulatory concentrations. The application of this tool was demonstrated by assessing levels of concern (as defined by the New Jersey Pinelands Commission) for thirty closed, uncapped landfills in the New Jersey Pinelands National Reserve, using historic water-quality data from monitoring wells on and near landfills and hydraulic parameters from regional flow models. Twelve of these landfills are categorized as having high levels of concern, indicating a need for further assessment. This tool is not a replacement for conventional numerically-based transport model or other available Domenico-based applications, but is suitable for quickly assessing the level of concern posed by a landfill or other contaminant point source before expensive and lengthy monitoring or remediation measures are taken. In addition to quantifying the level of concern using historic groundwater-monitoring data, the tool allows for archiving model scenarios and adding refinements as new data become available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗