Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

A research program to reduce interior noise in general aviation airplanes

The relevance of KU-FRL test results in predicting (theoretically or semi-empirically) interior noise levels in general aviation aircraft was studied. As a result of this study, it was decided to make a few additions to the program. These additions are: (1) to use three (instead of two) noise sources in the plane wave tube to evaluate the influence of excitation spectrum on panel response, (2) to use theoretical and experimental data obtained in the course of the project to develop more efficient noise reduction materials (or procedures to apply these), or to develop guidelines for the design of such materials for procedures, and (3) to use nonstructural materials in the collection of specimens to be tested in the KU-FRL plane wave tube.

Peschier, T. D.↗

Aerodynamic characteristics of wing-body configuration with two advanced general aviation airfoil sections and simple flap systems

Aerodynamic characteristics of a general aviation wing equipped with NACA 65 sub 2-415, NASA GA(W)-1, and NASA GA(PC)-1 airfoil sections were examined. The NASA GA(W)-1 wing was equipped with plain, split, and slotted partial- and full-span flaps and ailerons. The NASA GA(PC)-1 wing was equipped with plain, partial- and full-span flaps. Experimental chordwise static-pressure distribution and wake drag measurements were obtained for the NASA GA(PC)-1 wing at the 22.5-percent spanwise station. Comparisons were made between the three wing configurations to evaluate the wing performance, stall, and maximum lift capabilities. The results of this investigation indicated that the NASA GA(W)-1 wing had a higher maximum lift capability and almost equivalent drag values compared with both the NACA 65 sub 2-415 and NASA GA(PC)-1 wings. The NASA GA(W)-1 had a maximum lift coefficient of 1.32 with 0 deg flap deflection, and 1.78 with 41.6 deg deflection of the partial-span slotted flap. The effectiveness of the NASA GA(W)-1 plain and slotted ailerons with differential deflections were equivalent. The NASA GA(PC)-1 wing with full-span flaps deflected 0 deg for the design climb configuration showed improved lift and drag performance over the cruise flap setting of -10 deg.

Morgan, H. L., Jr.↗

Atmospheric, Magnetospheric and plasmas in Space (AMPS) spacelab payload definition study; Volume 4: Part 3, Labcraft instrument systems general specification

Guidelines and general requirements applicable to the development of instrument flight hardware intended for use on the GSFC Shuttle Scientific Payloads Program are given. Criteria, guidelines, and an organized approach to specifying the appropriate level of requirements for each instrument in order to permit its development at minimum cost while still assuring crew safety, are included. It is recognized that the instruments for these payloads will encompass wide ranges of complexity, cost, development risk, and safety hazards. The flexibility required to adapt the controls, documentation, and verification requirements in accord with the specific instrument is provided.

Keeley, J. T.↗

General purpose film plotting system

The general purpose film plotting system which is a plot program design to handle a majority of the data tape formats presently available under OS/360 was discussed. The convenience of this program is due to the fact that the user merely describes the format of his data set and the type of data plots he desires. It processes the input data according to the given specifications. The output is generated on a tape which yields data plots when processed by the selected plotter. A summary of each job is produced on the printer.

Mcquillan, C.↗

Generalized vegetation map of north Merrit Island based on a simplified multispectral analysis

A simplified system for classification of multispectral data was used for making a generalized map of ground features of North Merritt Island. Subclassification of vegetation within broad categories yielded promising results which led to a completely automatic method and to the production of satisfactory detailed maps. Changes in an area north of Happy Hammocks are evidently related to water relations of the soil and are not associated with the last winter freeze-damage which affected mainly the mangrove species, likely to reestablish themselves by natural processes. A supplementary investigation involving reflectance studies in the laboratory has shown that the reflectance by detached citrus leaves, of wavelengths lying between 400 microns and 700 microns, showed some variation over a period of seven days during which the leaves were kept in a laboratory atmosphere.

Poonai, P.↗

Computer considerations for real time simulation of a generalized rotor model

Scaled equations were developed to meet requirements for real time computer simulation of the rotor system research aircraft. These equations form the basis for consideration of both digital and hybrid mechanization for real time simulation. For all digital simulation estimates of the required speed in terms of equivalent operations per second are developed based on the complexity of the equations and the required intergration frame rates. For both conventional hybrid simulation and hybrid simulation using time-shared analog elements the amount of required equipment is estimated along with a consideration of the dynamic errors. Conventional hybrid mechanization using analog simulation of those rotor equations which involve rotor-spin frequencies (this consititutes the bulk of the equations) requires too much analog equipment. Hybrid simulation using time-sharing techniques for the analog elements appears possible with a reasonable amount of analog equipment. All-digital simulation with affordable general-purpose computers is not possible because of speed limitations, but specially configured digital computers do have the required speed and consitute the recommended approach.

Howe, R. M.↗

Spin-Tunnel Investigation of the Spinning Characteristics of Typical Single-Engine General Aviation Airplane Designs. 1. Low-Wing Model A: Effects of Tail Configurations

The effects of tail design on spin and recovery were investigated in a spin tunnel. A 1/11-scale model of a research airplane which represents a typical low-wing, single engine, light general aviation airplane was used. A tail design criterion for satisfactory spin recovery for light airplanes was evaluated. The effects of other geometric design features on the spin and recovery characteristics were also determined. Results indicate that the existing tail design criterion for light airplanes, which uses the tail damping power factor as a parameter, cannot be used to predict spin-recovery characteristics.

Burk, S. M., Jr.↗

Sources and characteristics of interior noise in general aviation aircraft

A field study has been conducted to examine the interior noise characteristics of a general aviation aircraft. The purposes of the study were to identify the major noise sources and their relative contribution and to establish the noise transmission paths and their relative importance. Tests were performed on an aircraft operating under stationary conditions on the ground. The results show that the interior noise level of light aircraft is dominated by broadband, low frequencies (below 1,000 Hz). Both the propeller and the engine are dominant sources; however, the contribution from the propeller is significantly more than the engine at its fundamental blade passage frequency. The data suggests that the airborne path is more dominant than the structure-borne path in the transmission of broadband, low-frequency noise which apparently results from the exhaust.

Catherines, J. J.↗

On the characteristic exponents of the general three-body problem

A description is given of some properties of the characteristic exponents of the general three-body problem. The variational equations on which the analysis is based are obtained by linearizing the Lagrangian equations of motion in the neighborhood of a given known solution. Attention is given to the fundamental matrix of solutions, the characteristic equation, the three trivial solutions of the variational equations of the three-body problem, symmetric periodic orbits, and the half-period properties of symmetric periodic orbits.

Broucke, R.↗

A possible experiment with two counter-orbiting drag-free satellites to obtain a new test of Einstein's general theory of relativity and improved measurements in geodesy

In 1918, Lense and Thirring calculated that a moon in orbit around a massive rotating planet would experience a nodal dragging effect due to general relativity. We describe an experiment to measure this effect by means of two counter-orbiting drag-free satellites in polar orbit about the earth. For a 2-1/2 year experiment, the measurement should approach an accuracy of 1%. An independent measurement of the geodetic precession of the orbit plane due to the motion about the sun may also be possible to about 10% accuracy. In addition to precision tracking data from existing ground stations, satellite-to-satellite Doppler data are taken at points of passing near the poles to yield an accurate measurement of the separation distance between the two satellites. New geophysical information on both earth harmonics and tidal effects is inherent in this polar ranging data.

Van Patten, R. A.↗

A search for a general gradient in the solar wind speed at low solar latitudes

Long-term averages of solar-wind-speed data obtained in the ecliptic plane from July 1964 through December 1975 have been examined for a regular variation in flow speed associated with earth's yearly excursion to latitudes of plus or minus 7.25 deg about the solar equator. Regular speed modulations of about 70 km/s peaking at the highest latitudes are discernible from mid-1964 through 1966 and from early 1969 to early 1971. During the remainder of this 11.5-year interval, the modulations in speed seem to be aperiodic. A superposed epoch analysis of all the data fails to reveal a general solar latitude gradient in the solar-wind flow for these 11.5 years. It is concluded that with near-earth observations, a latitude dependence of the flow speed is too small to be detected on a regular basis against a background 'noise' of solar-wind streams, which vary in longitude, latitude, and time.

Bame, S. J.↗

A higher order panel method for general analysis and design applications in subsonic flow

A higher-order panel method is described for numerical solution of boundary-value problems relating to steady inviscid irrotational incompressible subsonic fluid flow in a domain. Both Neumann and Dirichlet boundary conditions are treated; two types of auxiliary conditions are used to remove the degrees of freedom that arise from specifying only the derivative of the perturbation velocity potential. Four general network types and two expansions of the induced potential kernel are employed in the numerical solution. Some results are presented which illustrate the modeling options and numerical characteristics of the method.

Johnson, F. T.↗

Status report on the generalized likelihood ratio failure detection technique, with application to the F-8 aircraft

The generalized likelihood ratio technique, a scheme for detecting and identifying abrupt changes in dynamic systems, is described in detail. Attention is given to distinguishability, detectability, and sensitivity to modeling errors. This failure detection technique is applied to a two-dimensional model of the F-8, flying at Mach .6 at 20,000 ft. in cumulus clouds.

Bueno, R.↗

A theoretical study of the efficiency of the general circulation

The paper examines the problem of explaining the atmospheric efficiency, or equivalently, the rate of generation of available potential energy (APE) by diabatic heating. Attention is focused on determining the maximum possible rate of generation of APE and its accompanying temperature field, which does not require a knowledge of the atmospheric motions leading to temperature distribution. Qualitative and quantitative results indicate that the atmosphere may be operating within approximately a factor of 2 of its maximum efficiency. The general circulation may be operating at nearly its maximum efficiency.

Schulman, L. L.↗

Effects of particle drift on cosmic-ray transport. I - General properties, application to solar modulation

Although gradient and curvature drifts are explicitly contained in the general equations of cosmic-ray transport, they have been almost universally neglected in applications of these equations. The drifts are evaluated explicitly for the Parker (1965) spiral magnetic field, and it is shown that for particles with rigidities greater than about 0.3 GV in the solar wind, they are larger than the solar-wind velocity over much of the heliosphere. Hence most current models of solar modulation and solar-flare particle events neglect terms which in many cases are as important as those retained. Calculations are presented which demonstrate the importance of the effects for simple modulation models. It is concluded that comparisons of presently available model calculations with observations do not provide a fair test of transport theory since they neglect drifts, which may substantially reduce the net modulation.

Jokipii, J. R.↗

On the stability of the solutions of the general problem of three bodies

The extent through which the initial conditions of a given three-body system may be varied without completely changing the qualitative nature of the subsequent system evolution is investigated. It is assumed that the three masses are equal, all initial velocities are zero, the first two bodies initially lie on the x-axis, and the position of the third body is confined to a specific region of space. Analysis of the system evolution for different initial positions of the third body shows that there is a whole area or 'island' in the x-y plane throughout which the initial position of the third body may be moved in a continuous fashion to produce an evolution which also changes in a continuous manner. A Monte Carlo approach is adopted to determine the full extent of this island in the general problem. It is concluded that the stability of a full solution may be directly related to the size of its island in phase space.

Standish, E. M., Jr.↗

Utilization of separate surface control systems on general aviation aircraft

The application of separate surface control systems to general aviation aircraft is discussed. Block diagrams of a conventional control system with autopilot tie-in and of a separate surface control system are presented, and the advantages and disadvantages of the two systems are compared. Theoretical descriptions of pilot-in-the-loop operation and operation in the autopilot mode are presented. The application of separate surface stability augmentation in yaw dampers, wing levelers, and static longitudinal stability augmentation is examined. The state-of-the-art of separate control surface technology is summarized.

Roskam, J.↗

A general unified approach to modelling switching-converter power stages

A method for modeling switching-converter power stages is developed, whose starting point is the unified state-space representation of the switched networks and whose end result is either a complete state-space description or its equivalent small-signal low-frequency linear circuit model. A new canonical circuit model is proposed, whose fixed topology contains all the essential input-output and control properties of any dc-to-dc switching converter, regardless of its detailed configuration, and by which different converters can be characterized in the form of a table conveniently stored in a computer data bank to provide a useful tool for computer aided design and optimization. The new canonical circuit model predicts that, in general, switching action introduces both zeros and poles into the duty ratio to output transfer function in addition to those from the effective filter network.

Middlebrook, R. D.↗