Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feasibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Feasibility study of applying an advanced composite structure technique to the fabrication of helicopter rotor blades

The fabrication of helicopter rotary wings from composite materials is discussed. Two composite spar specimens consisting of compressively prestressed stainless steel liner over-wrapped with pretensioned fiberglass were constructed. High liner strength and toughness together with the prescribed prestresses and final sizing of the part are achieved by means of cryogenic stretch forming of the fiber wrapped composite spar at minus 320 F, followed by release of the forming pressure and warm up to room temperature. The prestresses are chosen to provide residual compression in the metal liner under operating loads.

Gleich, D.↗
NASA NTRS1972

Rotor blade boundary layer measurement hardware feasibility demonstration

A traverse mechanism which allows the measurement of the three dimensional boundary layers on a helicopter rotor blade has been built and tested on a full scale rotor to full scale conditions producing centrifugal accelerations in excess of 400 g and Mach numbers of 0.6 and above. Boundary layer velocity profiles have been measured over a range of rotor speeds and blade collective pitch angles. A pressure scanning switch and transducer were also tested on the full scale rotor and found to be insensitive to centrifugal effects within the normal main rotor operating range. The demonstration of the capability to measure boundary layer behavior on helicopter rotor blades represents the first step toward obtaining, in the rotating system, data of a quality comparable to that already existing for flows in the fixed system.

Clark, D. R.↗
NASA NTRS1972

Evaluation of feasibility of mapping seismically active faults in Alaska

The author has identified the following significant results. A previously unmapped seismically active fault has been identified in south-central Alaska on the basis of ERTS-1 imagery. It can be traced for at least 120 km. An unmapped fault was found on the northwest flank of Mt. Sanford that is apparently a reverse fault. A large scale, seismically active fracture system has been identified in central Alaska on the basis of MSS imagery. The system consists of two sets of fractures which intersect at an angle of about 55 degrees. The dominant feature of the system is the Minook Creek fault, on which an earthquake of magnitude 6.5 occurred on October 29, 1968. A possible related feature is a 60 km long lineament near the Toklat River north of Mt. McKinley. These areas are all moderately seismically active. Focal mechanism studies of the 1968 earthquake revealed that left-lateral displacement had occurred on the Minook Creek fault due to compressive stress. A similarly oriented direction of compressive stress could be responsible for the entire fracture system.

Gedney, L. D.↗
NASA NTRS1973

Evaluation of feasibility of mapping seismically active faults in Alaska

The author has identified the following significant results. ERTS-1 imagery is proving to be exceptionally useful in delineating structural features in Alaska which have never been recognized on the ground. Previously unmapped features such as seismically active faults and major structural lineaments are especially evident. Among the more significant results of this investigation is the discovery of an active strand of the Denali fault. The new fault has a history of scattered activity and was the scene of a magnitude 4.8 earthquake on October 1, 1972. Of greater significance is the disclosure of a large scale conjugate fracture system north of the Alaska Range. This fracture system appears to result from compressive stress radiating outward from around Mt. McKinley. One member of the system was the scene of a magnitude 6.5 earthquake in 1968. The potential value of ERTS-1 imagery to land use planning is reflected in the fact that this earthquake occurred within 10 km of the site which was proposed for the Rampart Dam, and the fault on which it occurred passes very near the proposed site for the bridge and oil pipeline crossing of the Yukon River.

Gedney, L. D.↗
NASA NTRS1972

Feasibility investigation of a cellularly organized data processor

The application of cellular arrays to NASA missions was studied. Cellular arrays are iterative logical and memory structures which can be programmed to accomplish a wide variety of logical tasks. Used in long-duration space missions, spare cellular arrays can be remotely programmed to replace faulty logical subsystems as the need arises.

Minnick, R. C.↗
NASA NTRS1973

Remote haze monitoring by satellite: A study to demonstrate the feasibility and determine the optimum method

The author has identified the following significant results. A general purpose flexible computer program for the analysis of ERTS MSS data has been written for the Control Data 7600 computer. By putting all of the analysis operations into a separate subroutine the user may concentrate on the analysis. The problems of getting the information into the computer in convenient format is solved once and need not be tampered with each time a new analysis procedure is desired. The problems of getting information written by the XDS computers in 8 bit byte format into a convenient format for analysis on the 60 bit word format CDC 7600 computer are not trivial. A general purpose program to accomplish this has been written and is available from the investigators upon request.

Rogers, E. H.↗
NASA NTRS1973

On the Feasibility of Efficient Multiamplitude Communication

Bandwidth constraints in earth-satellite communication systems force consideration of uncoded M-ary modulation to obtain increased data rates. M-ary phase shift keying (MPSK) at first glance seems most promising because of the high transmitter efficiency achieved through Class C operation. Multiple phase-and-amplitude modulation candidates such as quadrature amplitude shift keying (QASK) appear less promising because the transmitter must operate at lower efficiency (in linear or multimode operation). However, initial studies indicate that QASK offers significant raw dc-power savings over MPSK, despite the reduced transmitter efficiency. For example, at S-band both solid-state and traveling wave tube (TWT) QASK transmitters can provide a 3-dB average dc-power savings over comparable 16-ary phase shift keying (PSK) for the same bit rate and error probability. The reason for this savings is that QASK requires much less average signal-to-noise ratio than 16-ary PSK for the same error rate.

Smith, J. G.↗
NASA NTRS1973

Evaluation of feasibility of mapping seismically active faults in Alaska

The author has identified the following significant results. The Yukon-Tanana uplands north and east of Fairbanks appear, on ERTS-1 imagery, to be composed of a number of large-scale (approximately 100 kilometers square) crustal blocks. The boundaries of these blocks appear to be defined by a number of northeast-striking lineaments which form the major river valleys of the area. Principal among these are the valleys of the Salcha River, the Cehan River, and the Chatanika River. These lineaments are all seismically active, and are thus presumed to be faults. This parallel set of lineaments appears to be intersected at various angles by a secondary set of faults trending generally north to south. The larger earthquakes in the area occur at the intersections of the two sets. It appears that seismicity of this part of Alaska may be conceptually represented by the grinding together of rigid blocks, with earthquakes occurring along their common boundaries and at the intersections where three or more blocks come in contact.

Gedney, L. D.↗
NASA NTRS1973

Feasibility study for locating archaeological village sites by satellite remote sensing techniques

The author has identified the following significant results. Examination of NASA-provided aerial photography at the Pt. Hope, Alaska area has revealed numerous house pits, or the remains of former subterranean houses which have caved in. Although three major groupings of former house sites have previously been identified, a fourth area, north of the group known as Jabbertown had not previously been identified. It appears that this fourth site is quite extensive and may be of significance to understanding the sequence of habitation of the Pt. Hope location.

Cook, J. P.↗
NASA NTRS1973

A study of the feasibility of mechanical pumps for use with the Pioneer-Venus probe mass spectrometer inlet system

A survey of mechanical vacuum pumps was completed. A small Roots blower for flight mass spectrometer applications was evaluated with respect to system operating parameters in a number of different modes of operation. The survey indicated that a metal bellows pump might be a viable alternative for the systems requirements. The results of the study are given, including current status of possible flight-type pumps, a systems analysis using available pumps, and recommendations for fabrication and tests of a potential flight-type pump.

Thomas, N. C.↗
NASA NTRS1973

Feasibility study of the application of existing techniques to remotely monitor hydrochloric acid in the atmosphere

A critical evaluation of existing optical remote sensors for HCl vapor detection in solid propellant rocket plumes is presented. The P branch of the fundamental vibration-rotation band was selected as the most promising spectral feature to sense. A computation of transmittance for HCl vapor, an estimation of interferent spectra, the application of these spectra to computer modelled remote sensors, and a trade-off study for instrument recommendation are also included.

Zwick, H.↗
NASA NTRS1973

Research into the feasibility of metal- and oxide-film capacitors

Thin film capacitors with up to twenty-two active layers have been deposited by RF sputtering. The materials were aluminum electrodes of 1200 to 1500 angstrom thickness and silica dielectric layers of 3000 to 6000 angstrom thickness. The best electrical characteristics were capacitances of nearly 0.1 microfarad for an active area of 1.25 square centimeters, dissipation factor of less than 0.01 over a frequency range of 0.5 to 100 kilohertz and energy density of approximately 70 millijoules per cubic centimeter of active deposited material at a working voltage of 40 volts. These aluminum-silica capacitors exhibit excellent electrical stability over a temperature range from -55 C to +300 C.

Jorgenson, G. V.↗