Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “embedding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Molybdenum Carbide Electrocatalyst In Situ Embedded in Porous Nitrogen–Rich Carbon Nanotubes Promotes Rapid Kinetics in Sodium–Metal–Sulfur Batteries

This work is the first report of a molybdenum carbide-based electrocatalyst for sulfur-based sodium metal batteries (SMBs/NMBs). MoC/Mo 2 C is in-situ grown on nitrogen-doped carbon nanotubes in parallel with formation of extensive nanoporosity. Sulfur impregnation (50 wt% S) results in unique triphasic architecture termed MoC/Mo 2 C@PCNT-S. Quasi-solid-state phase transformation to Na 2 S is promoted in carbonate electrolyte, with in-situ time-resolved Raman, XPS and optical analysis demonstrating minimal soluble polysulfides. MoC/Mo 2 C@PCNT-S cathodes delivered among the most promising rate performance characteristics in literature, achieving 987 mAh g -1 at 1 Ag -1 , 818 mAh g -1 at 3 A g -1 , and 621 mAh g -1 at 5 A g -1 . The cells deliver superior cycling stability, retaining 650 mAh g -1 after 1000 cycles at 1.5 Ag -1 , corresponding to 0.028% capacity decay per cycle. High mass loading cathodes (64 wt% S, 12.7 mg cm -2 ) also show cycling stability, with anode degradation due to deep plating/stripping driving capacity decay. Density functional theory (DFT) demonstrates that formation energy of Na 2 S x (1 ≤ x ≤ 4) on surface of MoC/Mo 2 C is significantly lowered compared to analogous redox in liquid. Strong binding of Na 2 S x (1 ≤ x ≤ 4) on MoC/Mo 2 C surfaces results from charge transfer between the sulfur and Mo sites on carbides' surface.

25 ENERGY STORAGE↗

B—N–Bond–Embedded Triplet Terpolymers with Small Singlet–Triplet Energy Gaps for Suppressing Non–Radiative Recombination and Improving Blend Morphology in Organic Solar Cells

Suppressing the photon energy loss (E loss ), especially the non-radiative loss, is of importance to further improve the device performance of organic solar cells (OSCs). However, typical π-conjugated semiconductors possess a large singlet–triplet energy gap (ΔE ST ), leading to a lower triplet state than charge transfer state and contributing to a non-radiative loss channel of the photocurrent by the triplet state. Herein, a series of triplet polymer donors are developed by introducing a BNIDT block into the PM6 polymer backbone. Further, the high electron affinity of BNIDT and the opposite resonance effect of the B—N bond in BNIDT results in a lowered highest occupied molecular orbital (HOMO) and a largely reduced ΔE ST . Moreover, the morphology of the active blends is also optimized by fine-tuning the BNIDT content. Therefore, non-radiative recombination via the terminal triplet loss channels and morphology traps is effectively suppressed. The PNB-3 (with 3% BNIDT):L8-BO device exhibits both small ΔE ST and optimized morphology, favoring more efficient charge transfer and transport. Finally, the simultaneously enhanced V oc of 0.907 V, J sc of 26.59 mA cm –2 , and FF of 78.86% contribute to a champion PCE of 19.02%. Therefore, introducing B—N bonds into benchmark polymers is a possible avenue toward higher-performance of OSCs.

36 MATERIALS SCIENCE↗

3D Hybrid Plasmonic Framework with Au Nanopillars Embedded in Nitride Multilayers Integrated on Si

Integration of nanoscale photonic and plasmonic components on Si substrates is a critical step toward Si-based integrated nanophotonic devices. Herein, a set of unique complex 3D metamaterials with intercalated nanolayered and nanopillar structures with tunable plasmonic and optical properties on Si substrates is designed. More specifically, the 3D metamaterials combine metal (Au) nanopillars and alternating metal-nitride (Au-TiN and Au-TaN) nanolayers, epitaxially grown on Si substrates. The ultrafine Au nanopillars ( d ≈ 3 nm) continuously grow throughout all the nanolayers with high epitaxial quality. Novel optical properties, such as highly anisotropic optical property, high absorbance covering the entire visible spectrum regime, and hyperbolic property in the visible regime, are demonstrated. Furthermore, a waveguide based on a silicon nitride (Si 3 N 4 ) ridge with a multilayer structure is successfully fabricated. The demonstration of 3D nanoscale metamaterial design integrated on Si opens up a new route toward tunable metamaterials nanostructure designs with versatile material selection for various optical components in Si integrated photonics.

36 MATERIALS SCIENCE↗

FeN 4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Abstract Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN 4 /NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN 4 /NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm −2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular FeN 4 species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the FeN 4 –doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.

Lei, Chaojun↗

Crystal-Field Tuning of Photoluminescence in Two-Dimensional Materials with Embedded Lanthanide Ions

Lanthanide (Ln) group elements have been attracting considerable attention owing to the distinct optical properties. The crystal-field surroundings of Ln ions in the host materials can determine their energy level splitting, which is of vital importance to tailor their optical properties. 2D MoS 2 single crystals were utilized as the host material to embed Eu 3+ and energy-level splitting was achieved for tuning its photoluminescence (PL). The high anisotropy of the 2D host materials makes them distort the degenerate orbitals of the Ln ions more efficiently than the symmetrical bulk host materials. A significant red-shift of the PL peak for Eu 3+ was observed. The strategy for tailoring the energy level splitting of Ln ions by the highly designable 2D material crystal field provides a new method to extend their optical properties.

36 MATERIALS SCIENCE↗

Iron Porphyrins Embedded into a Supramolecular Porous Organic Cage for Electrochemical CO 2 Reduction in Water

Abstract A porous organic cage composed of six iron tetraphenylporphyrins was used as a supramolecular catalyst for electrochemical CO 2 ‐to‐CO conversion. This strategy enhances active site exposure and substrate diffusion relative to the monomeric catalyst, resulting in CO generation with near‐quantitative Faradaic efficiency in pH 7.3 water, with activities reaching 55 250 turnovers. These results provide a starting point for the design of supramolecular catalysts that can exploit the properties of the surrounding matrix yet retain the tunability of the original molecular unit.

Smith, Peter T.↗

Crystal-Field Tuning of Photoluminescence in Two-Dimensional Materials with Embedded Lanthanide Ions

Lanthanide (Ln) group elements have been attracting considerable attention owing to the distinct optical properties. The crystal-field surroundings of Ln ions in the host materials can determine their energy level splitting, which is of vital importance to tailor their optical properties. 2D MoS 2 single crystals were utilized as the host material to embed Eu 3+ and energy-level splitting was achieved for tuning its photoluminescence (PL). The high anisotropy of the 2D host materials makes them distort the degenerate orbitals of the Ln ions more efficiently than the symmetrical bulk host materials. A significant red-shift of the PL peak for Eu 3+ was observed. The strategy for tailoring the energy level splitting of Ln ions by the highly designable 2D material crystal field provides a new method to extend their optical properties.

36 MATERIALS SCIENCE↗

Iron Porphyrins Embedded into a Supramolecular Porous Organic Cage for Electrochemical CO 2 Reduction in Water

Here, a porous organic cage composed of six iron tetraphenylporphyrins was used as a supramolecular catalyst for electrochemical CO 2 -to-CO conversion. This strategy enhances active site exposure and substrate diffusion relative to the monomeric catalyst, resulting in CO generation with near-quantitative Faradaic efficiency in pH 7.3 water, with activities reaching 55 250 turnovers. These results provide a starting point for the design of supramolecular catalysts that can exploit the properties of the surrounding matrix yet retain the tunability of the original molecular unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO Adsorption on a Single‐Atom Catalyst Stably Embedded in Graphene

Abstract Confined single metal atoms in graphene‐based materials have proven to be excellent catalysts for several reactions and promising gas sensing systems. However, whether the chemical activity arises from the specific type of metal atom or is a direct consequence of the confinement itself remains unclear.

Chemistry↗

Efficient co-solution of time step size and independent state in simulations of fluid-driven fracture propagation with embedded meshes

Here we present an efficient time-continuation scheme for fluid-driven fracture propagation problems in the extended finite element method framework. The approach applies a monolithic solution strategy to a fully coupled and implicit approximation of hydro-mechanical systems in conjunction with simultaneous linear elastic propagation of multiple fractures. At the end of each time step, the process ensures that the weakest fracture tip is in an equilibrium propagation regime. Furthermore, the solution process provides an initialization procedure for the newly created fracture spaces and an a priori estimate of the stress intensity factor growth rate, improving simulation robustness, and efficiency. The solution process is validated using the Kristianovich-Geertsma-de Klerk analytical solution under the toughness- and viscosity-dominated regimes. It is also extended to and demonstrated on problems with multiple fractures undergoing simultaneous propagation with stress shadow interactions. Numerical examples demonstrate that the solution process can reduce the required computational cost by one order of magnitude compared to other existing methods.

42 ENGINEERING↗

Atomically Dispersed Silver Atoms Embedded in NiCo Layer Double Hydroxide Boost Oxygen Evolution Reaction

Abstract Bimetallic layered double hydroxides (LDHs) are promising catalysts for anodic oxygen evolution reaction (OER) in alkaline media. Despite good stability, NiCo LDH displays an unsatisfactory OER activity relative to the most robust NiFe LDH and CoFe LDH. Herein, a novel NiCo LDH electrocatalyst modified with single‐atom silver grown on carbon cloth (Ag SA ‐NiCo LDH/CC) that exhibits exceptional OER activity and stability in 1.0 m KOH is reported. The Ag SA ‐NiCo LDH/CC catalyst only requires a low overpotential of 192 mV to reach a current density of 10 mA cm −2 , obviously boosting the OER activity of NiCo LDH/CC (410 mV@10 mA cm −2 ). Inspiringly, Ag SA ‐NiCo LDH/CC can maintain its high activity for up to 500 h at a large current density of 100 mA cm −2 , exceeding most single‐atom OER catalysts. In situ Raman spectroscopy studies uncover that the in situ formed NiCoOOH during OER is the real active species. Hard X‐ray absorption spectrum (XAS) and density functional theory (DFT) calculations validate that single‐atom Ag occupying Ni site increases the chemical valence of Ni elements, and then weakens the adsorption of oxygen‐contained intermediates on Ni sites, fundamentally accounting for the enhanced OER performance.

Chemistry↗

Embedded anchoring of multi-material assemblies by friction riveting process

In this paper, we report on work that focused on extending the capability and broaden the applicability of the friction-riveting process for joining stacks composed of a wide range of multi-layer polymer-to-metals and similar and dissimilar metals. We first present direct experimental evidence of our use of this process to join aluminum-to-steel dissimilar metals with steel rivets. We have demonstrated for the first time the use of magnesium as a rivet material for joining carbon fiber reinforced polymer (CFRP) stacks, aluminum as a rivet material to laminate magnesium to CFRP, and aluminum-to-aluminum similar metal joining and aluminum-to-steel dissimilar metal joining with steel rivets. Our work sheds light on detailed process parameter optimization and the corresponding process response behavior, thus advancing our understanding of this complex joining method for a wide range of material combinations.

Friction-riveting, magnesium rivet, carbon fiber r↗