Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Distortion of Crabbed Bunch Due to Electron Cloud and Global Crabbing

Crab cavities may be used improve the luminosity in colliding beam colliders with crab crossing. In a global crab crossing correction, only one crab cavity is installed in each ring and the crab cavities generate a horizontally titled bunch oscillating around the ring. The electron cloud in positively charged rings may distort the crabbed bunch and cause the luminosity drop. This paper briefly estimates the distortion of positron bunch due to the electron cloud with global crab and estimates the effect in the KEKB and possible LHC upgrades.

43 PARTICLE ACCELERATORS↗

Sensing Few Electrons Floating on Helium with High-Electron-Mobility Transistors

We report on low-frequency measurements of few electrons floating on superfluid helium using a bespoke cryogenic cascode amplifier circuit built with off-the-shelf GaAs high-electron-mobility transistors (HEMTs). We integrate this circuit with a charge-coupled device (CCD) to transport the electrons on helium and characterize its performance. Here, we show that this circuit has a signal-to-noise ratio (SNR) of ~ 2 $\frac{e}{√Hz}$ at 102 kHz, an order of magnitude improvement from previous implementations, and provides a compelling alternative to few electron sensing with high-frequency resonators.

Charge-Coupled Devices↗

An Electron Microscopy Investigation of the Transient Stage Oxidation Products in an Fe-22Cr Alloy with Ce and La Additions Exposed to Dry Air at 1073 K (800 °C)

In this study, the effects of Ce (270 ppm) and La (120 ppm) mischmetal additions on the transient oxidation of an Fe-22Cr alloy were investigated. The oxidation process was imaged in situ using a confocal scanning laser microscope. The oxidation microstructures were studied by scanning electron microscopy, energy dispersive X-ray analysis, and transmission electron microscopy with the help of focused ion beam in situ lift-out specimen preparation. The Ce and La, referred to as reactive elements, were found in nonmetallic inclusion particles in the forms of oxides, sulfides, and phosphates. An affected zone formed around rare earth (RE)-containing inclusion particles at the alloy free surface during the transient oxidation. This zone consisted of an internal Cr-oxide formed beneath the particle as well as a thinner external oxide scale on the surface compared with the surroundings. The relation of this microstructure to oxidation kinetics is discussed. With time, the RE elements diffused into the scale from the RE particles on the alloy surface during the high-temperature exposure. A diffusion mechanism is presented to describe these observations.

01 COAL, LIGNITE, AND PEAT↗

Electronic, Structural, and Electrochemical Properties of LiNi x Cu y Mn 2-x-y O 4 (0 < x < 0.5, 0 < y < 0.5) High-Voltage Spinel Materials

First principles computation is carried out for investigating the electronic, structural, and electrochemical properties of LiM 1/2 Mn 3/2 O 4 (M = Ti, V, Cr, Fe, Co, Ni, and Cu). The computation results suggest that doping with Co or Cu can potentially lower Li diffusion barrier as compared to Ni doping. Our experimental research has focused on LiNi x Cu y Mn 2-x-y O 4 (0 < x < 0.5, 0 < y < 0.5), and we found that the amount of Cu will affect the lattice parameters, the cation disorder in the spinel lattice, the particle morphology, as well as the electrochemical properties. Crystal structures, electronic structures, and electrochemical properties of LiNi x Cu y Mn 2-x-6 O 4 (0 < x < 0.5, 0 < y < 0.5) are studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray absorption spectroscopy (XAS), and electrochemical measurements including potentiostatic intermittent titration technique (PITT). With detailed electrochemical measurements and in situ XAS experiments of LiNi 0.25 Cu 0.25 Mn 1.50 O 4 , the proposed explanation of the voltage profile by the first principles computation was proven, a second plateau at 4.2 V originates from the oxidation of Cu 2+ to Cu 3+ , and the plateau at 4.95 V may originate from extra electrons provided by oxygen ions. Although the reversible discharge capacity decreases with increasing Cu amount, optimized composition such as LiCu 0.25 Ni 0.25 Mn 1.5 O 4 exhibits high capacities at high rates.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron source concept for single-shot sub-100 fs electron diffraction in the 100 keV range

We present a method for producing sub-100 fs electron bunches that are suitable for single-shot ultrafast electron diffraction experiments in the 100 keV energy range. A combination of analytical estimates and state-of-the-art particle tracking simulations show that it is possible to create 100 keV, 0.1 pC, 30 fs electron bunches with a spot size smaller than 500 {mu}m and a transverse coherence length of 3 nm, using established technologies in a table-top setup. The system operates in the space-charge dominated regime to produce energy-correlated bunches that are recompressed by radio-frequency techniques. With this approach we overcome the Coulomb expansion of the bunch, providing a single-shot, ultrafast electron diffraction source concept.

43 PARTICLE ACCELERATORS↗

Highly Effective Polarized Electron Sources Based on Strained Semiconductor Superlattice with Distributed Bragg Reflector

Resonance enhancement of the quantum efficiency of new polarized electron photocathodes based on a short-period strained superlattice structures is reported. The superlattice is a part of an integrated Fabry-Perot optical cavity. We demonstrate that the Fabry-Perot resonator enhances the quantum efficiency by the order of magnitude in the wavelength region of the main polarization maximum. The high structural quality implied by these results points to the very promising application of these photocathodes for spin-polarized electron sources.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study and modeling of the electron-attracting sheath: The influence of secondary electron emission

A copper sample facing an energy-resolved mass spectrometer is biased positively beyond plasma potential in low-pressure argon plasma. Some ions are created in the sheath by electrons extracted from plasma and accelerated toward the mass spectrometer where they are detected according to their energy. Ion energy is related to local electrical sheath potential at which the ion has been created. Therefore, the Ion Distribution Function (IDF) allows us to probe in a nonperturbative way electron-attracting sheath potential. We observe a strong decrease of ion signal a few volts before sample bias. We attribute this effect to the presence of secondary electrons shielding positive sample potential. Potential profile and IDFs are computed using a model including secondary emission. The fit of IDFs provides an estimation of secondary emission yield and secondary electron temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Absolute calibration of an electron spectrometer using high energy electrons produced by the laser-plasma interaction

An in situ observation system has been developed to observe the absolute electron energy spectra of electron beams generated by laser-plasma interaction. A phosphor screen (DRZ) coupled with a charge coupled device camera is used to detect the electrons. A new method is proposed to calibrate the absolute sensitivity of the detection system for a wide energy range with a single shot by using an electron beam generated by laser-plasma interaction. The sensitivity of the system is found to be high, which is comparable to that of an imaging plate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron trajectory and growth rate in a two-stream electromagnetically pumped free electron laser and axial guide field

The effects of two-stream on electromagnetic wiggler free electron lasers (TSEMWFEL) with an axial guiding magnetic field are studied. An analysis of the two-stream steady-state electron trajectories is given by solving the equation of motion in the axial guiding magnetic field and the electromagnetic wiggler. Numerical calculations are made to illustrate the effects of the dual electron beam on the trajectories. The dispersion relation is derived employing linear fluid theory. The characteristics of the dispersion relation are analyzed numerically. The result shows that the growth rate is considerably enhanced in comparison with single-stream. The maximum growth rate is studied numerically as a function of axial guiding magnetic field for multiple electron trajectories. It is shown that the maximum growth rate of TSEMWFEL increases and decreases with respect to the axial guiding field for different trajectories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic modulational instability of electron-acoustic waves in an electron-pair ion plasma

The modulational instability of finite amplitude electron-acoustic waves (EAWs) along the external magnetic field is studied in an electron-pair ion plasma. Accounting for the relativistic electron mass variation nonlinearity and the Boltzmann distribution of both positive and negative ions, new regimes for the relativistic modulational instability (MI) for the low frequency (below the electron gyrofrequency) short-wavelength (in comparison with the ion gyroradius) modes are obtained numerically. It is found that the presence of a significant fraction of negative ions suppresses the MI growth/decay rate for the modulated EAW packets. The results could be of important for understanding the origin of amplitude modulated EAW packets in space (e.g., Earth's magnetotail) as well as in laboratory plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Electron-Ion Collider

The future Electron-Ion Collider (EIC) is a proposed new facility to collide high-energy electrons with beams of polarized protons/light nuclei and unpolarized nuclei. We overview the goals of the project and key measurements at the EIC. We also briefly comment on recent developments of the project.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Control of post-disruption runaway electron beams in DIII-D

Recent experiments in the DIII-D tokamak have demonstrated real-time control and dissipation of post-disruption runaway electron (RE) beams. In the event that disruption avoidance, control, and mitigation schemes fail to avoid or suppress RE generation, active control of the RE beam may be an important line of defense to prevent the rapid, localized deposition of RE beam energy onto vulnerable vessel sections. During and immediately after the current quench, excessive radial compression of the runaway beams is avoided by a combination of techniques, improving the likelihood of the beams surviving this dynamic period without a fast termination. Once stabilized, the runaway beams are held in a steady state (out to the ohmic flux limit) with the application of active plasma current and position controls. Beam interaction with the vessel wall is minimized by avoiding distinct thresholds for enhanced wall interaction at small and large radii, corresponding to inner wall and outer limiter interaction, respectively. Staying within the 'safe zone' between those radial thresholds allows for the sustainment of long-lived, quiescent runaway beams. The total beam energy and runaway electron population are then dissipated gradually by a controlled ramp-down of the runaway current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron diffraction using ultrafast electron bunches from a laser-wakefield accelerator at kHz repetition rate

We show that electron bunches in the 50-100 keV range can be produced from a laser wakefield accelerator using 10 mJ, 35 fs laser pulses operating at 0.5 kHz. It is shown that using a solenoid magnetic lens, the electron bunch distribution can be shaped. The resulting transverse and longitudinal coherence is suitable for producing diffraction images from a polycrystalline 10 nm aluminum foil. The high repetition rate, the stability of the electron source, and the fact that its uncorrelated bunch duration is below 100 fs make this approach promising for the development of sub-100 fs ultrafast electron diffraction experiments.

43 PARTICLE ACCELERATORS↗

Electron bunch energy and phase feed-forward stabilization system for the Mark V RF-linac free-electron laser

An amplitude and phase compensation system has been developed and tested at the University of Hawai'i for the optimization of the RF drive system to the Mark V free-electron laser. Temporal uniformity of the RF drive is essential to the generation of an electron beam suitable for optimal free-electron laser performance and the operation of an inverse Compton scattering x-ray source. The design of the RF measurement and compensation system is described in detail and the results of RF phase compensation are presented. Performance of the free-electron laser was evaluated by comparing the measured effects of phase compensation with the results of a computer simulation. Finally, preliminary results are presented for the effects of amplitude compensation on the performance of the complete system.

43 PARTICLE ACCELERATORS↗

Microstructure of highly strained BiFeO{sub 3} thin films: Transmission electron microscopy and electron-energy loss spectroscopy studies

Microstructure and electronic structure of highly strained bismuth ferrite (BiFeO{sub 3}) thin films grown on lanthanum aluminate substrates are studied using high-resolution transmission and scanning transmission electron microscopies and electron energy loss spectroscopy (EELS). Monoclinic and tetragonal phases were observed in films grown at different temperatures, and a mix of both phases was detected in a film grown at intermediate temperature. In this film, a smooth transition of the microstructure was found between the monoclinic and the tetragonal phases. A considerable increase in the c-axis parameters was observed in both phases compared with the rhombohedral bulk phase. The off-center displacement of iron (Fe) ions was increased in the monoclinic phase as compared with the tetragonal phase. EEL spectra show different electronic structures in the monoclinic and the tetragonal phases. These experimental observations are well consistent with the results of theoretical first-principle calculations performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A compact electron gun for time-resolved electron diffraction

A novel compact time-resolved electron diffractometer has been built with the primary goal of studying the ultrafast molecular dynamics of photoexcited gas-phase molecules. Here, we discuss the design of the electron gun, which is triggered by a Ti:Sapphire laser, before detailing a series of calibration experiments relating to the electron-beam properties. As a further test of the apparatus, initial diffraction patterns have been collected for thin, polycrystalline platinum samples, which have been shown to match theoretical patterns. The data collected demonstrate the focusing effects of the magnetic lens on the electron beam, and how this relates to the spatial resolution of the diffraction pattern.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultrafast electron diffraction with megahertz MeV electron pulses from a superconducting radio-frequency photoinjector

We report ultrafast relativistic electron diffraction operating at the megahertz repetition rate where the electron beam is produced in a superconducting radio-frequency (rf) photoinjector. We show that the beam quality is sufficiently high to provide clear diffraction patterns from gold and aluminium samples. With the number of electrons, several orders of magnitude higher than that from a normal conducting photocathode rf gun, such high repetition rate ultrafast MeV electron diffraction may open up many new opportunities in ultrafast science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of crystal growth rates during rapid solidification of polycrystalline aluminum by nano-scale spatio-temporal resolution in situ transmission electron microscopy

In situ investigations of rapid solidification in polycrystalline Al thin films were conducted using nano-scale spatio-temporal resolution dynamic transmission electron microscopy. Differences in crystal growth rates and asymmetries in melt pool development were observed as the heat extraction geometry was varied by controlling the proximity of the laser-pulse irradiation and the associated induced melt pools to the edge of the transmission electron microscopy support grid, which acts as a large heat sink. Experimental parameters have been established to maximize the reproducibility of the material response to the laser-pulse-related heating and to ensure that observations of the dynamical behavior of the metal are free from artifacts, leading to accurate interpretations and quantifiable measurements with improved precision. Interface migration rate measurements revealed solidification velocities that increased consistently from ∼1.3 m s{sup −1} to ∼2.5 m s{sup −1} during the rapid solidification process of the Al thin films. Under the influence of an additional large heat sink, increased crystal growth rates as high as 3.3 m s{sup −1} have been measured. The in situ experiments also provided evidence for development of a partially melted, two-phase region prior to the onset of rapid solidification facilitated crystal growth. Using the experimental observations and associated measurements as benchmarks, finite-element modeling based calculations of the melt pool evolution after pulsed laser irradiation have been performed to obtain estimates of the temperature evolution in the thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗