Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

A numerical investigation on methane combustion and emissions from a natural gas-diesel dual fuel engine using CFD model

Natural gas (NG)-diesel dual fuel engines have been criticized for their high emissions of unburned methane. The past research on methane emissions from dual fuel engines has focused on the measurement of methane concentration in exhaust gases. The development of approaches capable of minimizing methane emissions requests the detailed spatial distribution of methane in-cylinder during the combustion and post combustion processes. However, it is difficult to experimentally measure the spatial distribution of methane in-cylinder. Here this research presents a numerical study on the combustion process of a NG-diesel dual fuel engine using the computational fluids dynamics (CFD) model CONVERGE coupled with a reduced primary reference fuel (PRF) mechanism. The model was validated against the heat release process and the emissions of nitrogen oxide, methane and carbon monoxide measured in a single cylinder dual fuel engine. The validated CFD model was applied to investigate the combustion of methane and n-heptane and the spatial distribution of methane in the dual fuel engine. This is most likely the first attempt to visualize the spatial distribution of methane in dual fuel engines using CFD. The objective of this study is to numerically simulate the methane combustion process, especially the methane present outside the pilot spray, quantify the methane combustion in each combustion stage, and visualize the spatial methane distribution in cylinder. The results showed that the momentum produced by the pilot fuel injection and combustion pushed the combustion products of pilot fuel and methane within the pilot spray plume toward the unburned methane-air mixture. Such a movement enhanced the mixing of the hot combustion products and the relatively cold unburned methane-air mixture during the main combustion process and dominated the combustion of methane presented outside the pilot fuel spray plume. Based on the simulation results at a low load condition (4.05 bar), the main combustion process consumed 43–53% of the methane fumigated into the intake mixture. The post-combustion oxidation process consumed 17–29% of the intake methane, which was 36.2–51.8% methane that survived the main combustion process. In comparison, 27–35% methane emitted the engine without participating the combustion process. The unburned methane at exhaust valve opening was mainly observed at the center of the cylinder. In comparison, the contribution of the crevice and boundary layer around the cylinder liner to methane emissions was relatively small. The slip of methane through the dual fuel engines was due to the fact that the premixed mixture was too lean to support the propagation of the turbulent flame initiated by the pilot fuel and the lack of pilot fuel vapor reaching the center of the combustion chamber because of the geometric limitations of the fuel injection system and the reduced mass of pilot fuel injected into the cylinder. The approaches aiming to enhance the combustion of methane and minimize methane emissions from dual fuel engines should focus on those capable of increasing the volume of pilot fuel vapor formed after injected into the cylinder.

42 ENGINEERING↗

Quantum temporal probabilities in tunneling systems

We study the temporal aspects of quantum tunneling as manifested in time-of-arrival experiments in which the detected particle tunnels through a potential barrier. In particular, we present a general method for constructing temporal probabilities in tunneling systems that (i) defines ‘classical’ time observables for quantum systems and (ii) applies to relativistic particles interacting through quantum fields. We show that the relevant probabilities are defined in terms of specific correlation functions of the quantum field associated with tunneling particles. We construct a probability distribution with respect to the time of particle detection that contains all information about the temporal aspects of the tunneling process. In specific cases, this probability distribution leads to the definition of a delay time that, for parity-symmetric potentials, reduces to the phase time of Bohm and Wigner. We apply our results to piecewise constant potentials, by deriving the appropriate junction conditions on the points of discontinuity. For the double square potential, in particular, we demonstrate the existence of (at least) two physically relevant time parameters, the delay time and a decay rate that describes the escape of particles trapped in the inter-barrier region. Finally, we propose a resolution to the paradox of apparent superluminal velocities for tunneling particles. We demonstrate that the idea of faster-than-light speeds in tunneling follows from an inadmissible use of classical reasoning in the description of quantum systems. -- Highlights: •Present a general methodology for deriving temporal probabilities in tunneling systems. •Treatment applies to relativistic particles interacting through quantum fields. •Derive a new expression for tunneling time. •Identify new time parameters relevant to tunneling. •Propose a resolution of the superluminality paradox in tunneling.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sources of stochasticity in the growth of cloud droplets: supersaturation fluctuations versus turbulent transport

The role played by fluctuations of supersaturation in the growth of cloud droplets is examined in this study. The stochastic condensation framework and the three regimes of activation of cloud droplets – namely, mean-dominant, fluctuation-influenced, and fluctuation-dominant, are used for analyzing the data from high-resolution large-eddy simulations of the Pi convection-cloud chamber. Based on a detailed budget analysis the significance of all the terms in the evolution of the droplet size distribution equation is evaluated in all three regimes. The analysis indicates that the mean-growth rate is a dominant process in shaping the droplet size distribution in all three regimes. Turbulence introduces two sources of stochasticity, turbulent transport and particle lifetime, and supersaturation fluctuations. The transport of cloud droplets plays an important role in all three regimes, whereas the direct effect of supersaturation fluctuations is primarily related to the activation and growth of the small droplets in the fluctuation-influenced and fluctuation-dominant regimes. Here, we compare our results against the previous studies (experimental and theory) of the Pi chamber, and discuss the limitations of the existing models based on the stochastic condensation framework. Furthermore, we extend the discussion of our results to atmospheric clouds, and in particular focus on recent adiabatic turbulent cloud parcel simulations based on the stochastic condensation framework, and emphasize the importance of entrainment/mixing and turbulent transport in shaping the droplet size distribution.

54 ENVIRONMENTAL SCIENCES↗

Fully Coupled Geomechanics and Discrete Flow Network Modeling of Hydraulic Fracturing for Geothermal Applications

The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in enhanced geothermal systems (EGS). Simulating processes resulting in hydraulic fracturing and/or the remobilization of existing fractures, especially the interaction between propagating fractures and existing fractures, represents a critical goal of our project. To this end, we are continuing to develop a hydraulic fracturing simulation capability within the Livermore Distinct Element Code (LDEC), a combined FEM/DEM analysis code with explicit solid-fluid mechanics coupling. LDEC simulations start from an initial fracture distribution which can be stochastically generated or upscaled from the statistics of an actual fracture distribution. During the hydraulic stimulation process, LDEC tracks the propagation of fractures and other modifications to the fracture system. The output is transferred to the Non-isothermal Unsaturated Flow and Transport (NUFT) code to capture heat transfer and flow at the reservoir scale. This approach is intended to offer flexibility in the types of analyses we can perform, including evaluating the effects of different system heterogeneities on the heat extraction rate as well as seismicity associated with geothermal operations. This paper details the basic methodology of our approach. Two numerical examples showing the capability and effectiveness of our simulator are also presented.

15 GEOTHERMAL ENERGY↗

Arc distribution during the vacuum arc remelting of Ti-6Al-4V

Currently, the temporal distribution of electric arcs across the ingot during vacuum arc remelting (VAR) is not a known or monitored process parameter. Previous studies indicate that the distribution of arcs can be neither diffuse nor axisymmetric about the center of the furnace. Correct accounting for the heat flux, electric current flux, and mass flux into the ingot is critical to achieving realistic solidification models of the VAR process. The National Energy Technology Laboratory has developed an arc position measurement system capable of locating arcs and determining the arc distribution within an industrial VAR furnace. The system is based on noninvasive magnetic field measurements and a VAR specific form of the Biot–Savart law. The system was installed on a coaxial industrial VAR furnace at ATI Albany Operations in Albany, OR. This article reports on the different arc distributions observed during production of Ti-6Al-4V. It is shown that several characteristic arc distribution modes can develop. This behavior is not apparent in the existing signals used to control the furnace, indicating the measurement system is providing new information. It is also shown that the different arc distribution modes observed may impact local solidification times, particularly at the side wall.

36 MATERIALS SCIENCE↗

A Grand Challenge "Uncertainty Project" to Accelerate Advances in Earth System Predictability: AI-Enabled Concepts and Applications

This proposal is emerging from GISS ModelE3 ESM development in the area of cloud physics, so we begin with an example of research needs/gaps from that work. Here, some of our greatest development concerns arise where we lack fundamental process-level understanding, as in ice formation. Namely, it is currently unclear what is the main process that is forming the majority of ice crystals in commonly occurring convection, apparently via secondary ice production at warm temperatures. We are keenly awaiting laboratory data for candidate mechanisms, which is not yet in hand to crucially establish their efficiency. Our progress is also hampered by a lack of uncertainty characterization in currently available measurements of ice crystal number size distributions. Furthermore, the same multiplication process may be responsible for a majority of ice crystals in many extratropical mixed-phase clouds, whose variable representation in CMIP6 ESMs may be a leading cause of differences in cloud phase feedback and ECS. Yet we have been required to deliver an ESM with the cloud physics knowledge at hand. The proposed grand challenge project is AI-enabled via application of machine learning (ML) to climate model and observational data streams (focal area 3), and applications include AI-guided observing system design and model/component/parameterization selection (areas 1 and 2). The project is structurally agnostic as to whether model or observing system components use AI approaches or not, but uncertainties must be estimated and propagatable in both.

58 GEOSCIENCES↗

Barrier distribution from {sup 9}Be+{sup 208}Pb quasielastic scattering: Breakup effects in the interaction processes

Excitation function of the quasielastic (QEL) scattering at a backward angle was measured for the weakly bound projectile {sup 9}Be, which bombarded a {sup 208}Pb target at near-barrier energies. Barrier distribution was extracted by means of the first derivative of the experimental cross sections with respect to the effective energies. Theoretical fusion barrier distribution has been calculated with the coupled-channels model and compared with the experimental barrier distribution. By this comparison, it is shown that the experimental barrier distribution extracted from QEL scattering is shifted to low energy by 1.5 MeV as compared with the theoretical one. This energy discrepancy between the theoretical prediction and the experimental data indicates the breakup is an important reaction mechanism in the colliding processes of the weakly bound projectile {sup 9}Be on a spherical target {sup 208}Pb.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

BioMass PDU Electrical Design Study UPDATE

The BioMass Process Demonstration Unit (PDU) electrical system is used for the power distribution and control of the many motors and process required loads. Study requirements include a complete system analysis and equipment evaluation, which includes conductor sizing, transformer sizing, breaker and fuse sizing, short-circuit analysis, load-flow analysis, protective-device coordination, arc-flash-hazard analysis, and a multi-state code and grounding review.

09 BIOMASS FUELS↗

2 Kelvin helium distribution system for the Electron Ion Collider’s 10 o’clock satellite refrigerator

The Electron-Ion Collider (EIC) at Brookhaven National Laboratory (BNL) will involve superfluid helium cooling of superconducting magnets and Superconducting Radio Frequency (SRF) cavities at several sites around the existing Relativistic Heavy Ion Collider (RHIC) accelerator tunnel. While the majority of the cooling power for these loads is provided by BNL’s central cryogenic plant, Jefferson Lab is designing satellite equipment which augments the central plant and enables 2 Kelvin operation. The 2 K cryogenic distribution system for the collider’s 10 o’clock location (Interaction Region 10 or IR10) includes all necessary interfaces to the IR10 Satellite Refrigerator, to the overall EIC cryogenic distribution system, and to 12 SRF cryomodules for the electron and hadron storage rings. In addition to providing the required cooling capacities in all operating modes, the IR10 2 K cryogenic distribution system also stabilizes the supply temperature and enables safe connection and disconnection of individual IR10 cryomodules. Moreover, the layout of the IR10 2 K cryogenic distribution system copes with challenging spatial constraints and adapts to the process configuration and routing of existing RHIC cryogenic distribution components which will be re-used for EIC. This paper gives a full overview of the IR10 satellite cryogenic distribution system design, and highlights some of the challenges encountered.

Laverdure, Nathaniel [Thomas Jefferson National Ac↗

In situ high-temperature 3D imaging of the damage evolution in a SiC nuclear fuel cladding material

Silicon carbide (SiC)-based nuclear fission fuel rod cladding has been considered as one of the possible designs for accident tolerant fuels. It is in the form of a SiC fibre reinforced SiC matrix composite tube (SiC f -SiC m ) with monolithic SiC outer and/or inner coating layers. This study focuses on the deformation and fracture processes in this material using in situ X-ray micro-computed tomography (XCT) at room temperature (RT) and 1200 °C in an inert gas environment in a C-ring compression loading configuration. Prior to testing, local properties and residual stresses were characterised using nanoindentation and Raman spectroscopy since they can impact the mechanical behaviour of the material. The 3D strain distribution, crack formation and propagation processes including the toughening mechanisms (e.g., crack deflection, micro-cracking, crack bridging and bifurcation) are investigated in the coating and underlying composites at RT and 1200 °C. There is no particular sequence which toughening mechanism occurs first – this is very different from the conventional toughening theory in ceramic-matrix composites under uniaxial tension loading. Indeed, no evidence of fibre pull-out or fibre fracture was observed in this SiC f -SiC m nuclear cladding material in the current C-ring compression configuration. The correlation between local measurements and bulk mechanical behaviour are discussed.

3D imaging↗

Atom probe study of Cu-poor to Cu-rich transition during Cu(In,Ga)Se{sub 2} growth

Atomic scale chemistry of polycrystalline Cu(In,Ga)Se{sub 2} (CIGSe) thin film has been characterized at key points of the 3-stage process using atom probe tomography. 3D atom distributions have been reconstructed when the layer is Cu-poor ([Cu]/([Ga] + [In]) < 1), Cu-rich ([Cu]/([Ga] + [In]) > 1), and at the end of the process. Particular attention has been devoted to grain boundary composition and Na atomic distribution within the CIGSe layer. Significant variation of composition is highlighted during the growing process, providing fundamental information helping the understanding of high efficiency CIGSe formation.

36 MATERIALS SCIENCE↗

Forward-backward asymmetry of top quark pair production

We adopt a Markov chain Monte Carlo method to examine various new physics models which can generate the forward-backward asymmetry in top quark pair production observed at the Tevatron by the CDF Collaboration. We study the following new physics models: (1) exotic gluon G{sup '}, (2) extra Z{sup '} boson with flavor-conserving interaction, (3) extra Z{sup '} with flavor-violating u-t-Z{sup '} interaction, (4) extra W{sup '} with flavor-violating d-t-W{sup '} interaction, and (5) extra scalars S and S{sup {+-}}with flavor-violating u-t-S and d-t-S{sup {+-}}interactions. After combining the forward-backward asymmetry with the measurement of the top pair production cross section and the tt invariant mass distribution at the Tevatron, we find that an axial vector exotic gluon G{sup '} of mass about 1 TeV or 2 TeV or a W{sup '} of mass about 2TeV offer an improvement over the standard model. The other models considered do not fit the data significantly better than the standard model. We also emphasize a few points that have been long ignored in the literature for new physics searches: (1) heavy resonance width effects, (2) renormalization scale dependence, and (3) next-to-leading order corrections to the tt invariant mass spectrum. We argue that these three effects are crucial to test or exclude new physics effects in the top quark pair asymmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Low-Temperature Electrochemical Upgrading of Bio-oils Using Polymer Electrolyte Membranes

While bio-oil-derived fuels hold much promise as a replacement for petroleum, transformation of the highly oxygenated mixture has proven challenging. In particular, bio-oils are reactive and difficult to upgrade through catalytic pyrolysis. To reach a stabilized product capable of deep deoxygenation at elevated pressure and temperature, conversion or separation of reactive groups is required. This paper describes an electrochemical process for stabilization and upgrading of bio-oils prior to hydrotreating at high pressure and temperature. This electrolytic process uses a three-compartment cell designed to hydrogenate reactive carbonyl components while separating small acid molecules, such as acetic and formic acids, which act as catalysts for condensation reactions and consume hydrogen gas to produce low-value gases in hydrotreating. To avoid conductivity issues, electrodes are appended to anion- and cation-exchange membranes. The cell was tested using a mixed acetic acid and formic acid surrogate fed to the cathode compartment, where the decrease in the concentration followed the applied charge to the cell. Experiments performed using pine pyrolysis oil demonstrated a significant reduction in the total acid number (TAN), an increase in pH from 2.6 to over 4, and a modest reduction of the carbonyl concentration. Analysis showed the reduction in TAN was primarily due to removal of carboxylic compounds. Experiments observed a decrease in the reactive carbonyl (aldehydes and ketones) concentration that followed applied charge. The results with the newly devised reactor show promise for the electrochemical route for upgrading bio-oils, but significant improvements in TAN removal and carbonyl conversion are needed. Given the distributed nature of biomass, an electrochemical process paired with pyrolysis could be used to densify and stabilize an oil product near the source. The densified liquid could then be shipped to centralized refineries for final upgrading to fuel and/or chemical products.

Lister, Tedd↗

Deactivation and decommissioning web log analysis using big data technology - 15710

The D and D Knowledge Management Information Tool (D and D KM- IT) is a web-based knowledge management information tool built for the D and D user community. Big data is a massive volume of structured and unstructured datasets which is so large that it's difficult to process using traditional database techniques. Web logs are the repository of files which are generated automatically for any operation on the web site. Web log files generated from the D and D KM-IT will be processed using the Apache Hadoop Framework to extract meaningful data. Hadoop is an open-source software framework for storing and processing big data in a distributed environment on large clusters of commodity hardware. Hadoop framework consists of two main layers: Hadoop distributed file system (HDFS) and the Execution engine (MapReduce). Automatic parallelization and distribution; clean and simple programming abstraction. Implementation: Web log files from the D and D KM-IT server are fetched using Apache Flume and loaded into the Hadoop distributed file system. Using the Apache Hcatalog tool, the web log data is parsed and converted into a structured table format. A Pig program is developed to query the tables to retrieve and store the significant information onto the HDFS. The extracted data is fed to business visualization tools such as Microsoft Excel for analysis and reporting. Results The reports generated through the web log data processing will be analyzed to improve the usability and performance of the D and D KM-IT. Conclusion/Future Work: User keyword information can be explored to add new trending topics to the D and D KM-IT application. Statistics generated can be compared to analysis reports from existing analytical tools.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Parallel Ghosting Algorithm for The Flexible Distributed Mesh Database

Critical to the scalability of parallel adaptive simulations are parallel control functions including load balancing, reduced inter-process communication and optimal data decomposition. In distributed meshes, many mesh-based applications frequently access neighborhood information for computational purposes which must be transmitted efficiently to avoid parallel performance degradation when the neighbors are on different processors. This article presents a parallel algorithm of creating and deleting data copies, referred to as ghost copies, which localize neighborhood data for computation purposes while minimizing inter-process communication. The key characteristics of the algorithm are: (1) It can create ghost copies of any permissible topological order in a 1D, 2D or 3D mesh based on selected adjacencies. (2) It exploits neighborhood communication patterns during the ghost creation process thus eliminating all-to-all communication. (3) For applications that need neighbors of neighbors, the algorithm can create n number of ghost layers up to a point where the whole partitioned mesh can be ghosted. Strong and weak scaling results are presented for the IBM BG/P and Cray XE6 architectures up to a core count of 32,768 processors. The algorithm also leads to scalable results when used in a parallel super-convergent patch recovery error estimator, an application that frequently accesses neighborhood data to carry out computation.

Mubarak, Misbah↗

The DarkLight Experiment at the JLab FEL

DarkLight will study the production of gauge bosons associated with Dark Forces theories in the scattering of 100 MeV electrons on proton a target. DarkLight is a spectrometer to measure all the final state particles in e^- +p --> e^- +p + e^- + e^+. QED allows this process and the invariant mass distribution of the e+e- pair is a continuum from nearly zero to nearly the electron beam energy. Dark Forces theories, which allow the dark matter mass scale to be over 1 TeV, predict a gauge boson A' in the mass range of 10-1,000 MeV and decays to an electron-positron pair with an invariant mass of mA'. We aim to search for this process using the 100 MeV, 10 mA electron beam at the JLab Free Electron Laser impinging on a hydrogen target with a 10^19cm^?2 density. The resulting luminosity of 6×10^35/cm^2-s gives the experiment enough sensitivity to probe A' couplings of 10?9a. DarkLight is unique in its design to detect all four particles in the final state. The leptons will be measured in a large high-rate TPC and a silicon sensor will measure the protons. A 0.5 T solenoidal magnetic field provides the momentum resolution and focuses the copious Moeller scattering background down the beam line, away from the detectors. A first beam test has shown the FEL beam is compatible with the target design and that the hall backgrounds are manageable. The experiment has been approved by Jefferson Lab for first running in 2017.

Fisher, Peter↗

Barium stars as tracers of s -process nucleosynthesis in AGB stars

Barium (Ba) stars help to verify asymptotic giant branch (AGB) star nucleosynthesis models since they experienced pollution from an AGB binary companion and thus their spectra carry the signatures of the slow neutron capture process (s process). For a large number (180) of Ba stars, we searched for AGB stellar models that match the observed abundance patterns. We aim to uncover any systematic deviations of the sample abundances from the predictions of the nucleosynthesis models. We employed three machine learning algorithms as classifiers: a Random Forest method, developed for this work, and the two classifiers used in our previous study. Compared to that work, we also expanded our observational sample with 11 Ba stars available in the supersolar metallicity range. We studied the statistical behaviour of the different s-process elements in the observational sample to investigate if the AGB models systematically under- or overpredict the abundances observed in the Ba stars and show the results in the form of violin plots of the residuals between spectroscopic abundances and model predictions. We inspected the correlations between the observed [Fe/H], the s-process elemental abundances, and the residuals. We employed the [Zr/Fe] and [Nb/Fe] abundances as a thermometer to constrain the operational temperature that rules the production of these elements in the sample stars, assuming a steady-state s process. We also investigated the mass distribution of the identified polluter AGB stars and the behaviour of the δ parameter, which describes the fraction of accreted AGB material relative to the Ba star envelope. We find a significant trend in the residuals that implies an underproduction of the elements just after the first s-process peak (Nb, Mo, and Ru) in the models relative to the observations. This may originate from a neutron-capture process (e.g. the intermediate neutron-capture process, i process) not yet included in the AGB models of metallicity from solar to roughly 1/5 solar, corresponding to the range of the Ba stars. Correlations are found between the residuals of these peculiar elements, suggesting a common origin for the deviations from the models. In addition, there is a weak metallicity dependence of the residuals of these elements. The s-process temperatures derived with the [Zr/Fe] – [Nb/Fe] thermometer have an unrealistic value for the majority of our stars. The most likely explanation is that at least a fraction of these elements are not produced in a steady-state s process, and instead may be due to processes not included in the AGB models. The mass distribution of the identified models confirms that our sample of Ba stars was polluted by low-mass AGB stars (< 4 M ⊙ ). Most of the matching AGB models require low accreted mass, but a few systems with high accreted mass are needed to explain the observations.

79 ASTRONOMY AND ASTROPHYSICS↗