Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissipative systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Kozai–Lidov Oscillations Triggered by a Tilt Instability of Detached Circumplanetary Discs

Circumplanetary discs can be linearly unstable to the growth of disc tilt in the tidal potential of the star–planet system. We use3D hydrodynamical simulations to characterize the disc conditions needed for instability, together with its long-term evolution.Tilt growth occurs for disc aspect ratios, evaluated near the disc outer edge, ofH/r0.05, with a weak dependence on viscosityin the wave-like regime of warp propagation. Lower mass giant planets are more likely to have circumplanetary discs thatsatisfy the conditions for instability. We show that the tilt instability can excite the inclination to above the threshold where thecircumplanetary disc becomes unstable to Kozai–Lidov (KL) oscillations. Dissipation in the KL unstable regime caps furthertilt growth, but the disc experiences large oscillations in both inclination and eccentricity. Planetary accretion occurs in episodicaccretion events. We discuss implications of the joint tilt–KL instability for the detectability of circumplanetary discs, for theobliquity evolution of forming giant planets, and for the formation of satellite systems.

Rebecca G Martin↗
DOE OSTI2023

Electron-scale current sheets and energy dissipation in 3D kinetic-scale plasma turbulence with low electron beta

ABSTRACT Three-dimensional kinetic-scale turbulence is studied numerically in the regime where electrons are strongly magnetized (the ratio of plasma species pressure to magnetic pressure is βe = 0.1 for electrons and βi = 1 for ions). Such a regime is relevant in the vicinity of the solar corona, the Earth’s magnetosheath, and other astrophysical systems. The simulations, performed using the fluid-kinetic spectral plasma solver (sps) code, demonstrate that the turbulent cascade in such regimes can reach scales smaller than the electron inertial scale, and results in the formation of electron-scale current sheets (ESCS). Statistical analysis of the geometrical properties of the detected ESCS is performed using an algorithm based on the medial axis transform. A typical half-thickness of the current sheets is found to be on the order of electron inertial length or below, while their half-length falls between the electron and ion inertial length. The pressure–strain interaction, used as a measure of energy dissipation, exhibits high intermittency, with the majority of the total energy exchange occurring in current structures occupying approximately 20 per cent of the total volume. Some of the current sheets corresponding to the largest pressure–strain interaction are found to be associated with Alfvénic electron jets and magnetic configurations typical of reconnection. These reconnection candidates represent about 1 per cent of all the current sheets identified.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1989

The impact of stellar evolution on planetary system development

The connection between stellar evolution and planet formation is investigated. Particular attention is given to the problem posed by the fact that the formation of Jupiter occurred before the formation of Mars and that the formation of the solid core of Saturn was completed before the dissipation of the gas in the nebula. Several possible solutions to this problem are suggested.

Bodenheimer, Peter↗
DOE OSTI2024

Nanoelectromechanical Control of Spin–Photon Interfaces in a Hybrid Quantum System on Chip

Color centers (CCs) in nanostructured diamond are promising for optically linked quantum technologies. Scaling to useful applications motivates architectures meeting the following criteria: C1 individual optical addressing of spin qubits; C2 frequency tuning of spin-dependent optical transitions; C3 coherent spin control; C4 active photon routing; C5 scalable manufacturability; and C6 low on-chip power dissipation for cryogenic operations. Here, we introduce an architecture that simultaneously achieves C1–C6. We realize piezoelectric strain control of diamond waveguide-coupled tin vacancy centers with ultralow power dissipation necessary. The DC response of our device allows emitter transition tuning by over 20 GHz, combined with low-power AC control. We show acoustic spin resonance of integrated tin vacancy spins and estimate single-phonon coupling rates over 1 kHz in the resolved sideband regime. Combined with high-speed optical routing, our work opens a path to scalable single-qubit control with optically mediated entangling gates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Computing equilibrium free energies through a nonequilibrium quench

Many methods to accelerate sampling of molecular configurations are based on the idea that temperature can be used to accelerate rare transitions. These methods typically compute equilibrium properties at a target temperature using reweighting or through Monte Carlo exchanges between replicas at higher temperatures. A recent paper [G. M. Rotskoff and E. Vanden-Eijnden, Phys. Rev. Lett. 122, 150602 (2019)] demonstrated that accurate equilibrium densities of states can also be computed through a nonequilibrium “quench” process, where sampling is performed at a higher temperature to encourage rapid mixing and then quenched to lower energy states with dissipative dynamics. Here, we provide an implementation of the quench dynamics in LAMMPS and evaluate a new formulation of nonequilibrium estimators for the computation of partition functions or free energy surfaces (FESs) of molecular systems. We show that the method is exact for a minimal model of N-independent harmonic springs and use these analytical results to develop heuristics for the amount of quenching required to obtain accurate sampling. We then test the quench approach on alanine dipeptide, where we show that it gives an FES that is accurate near the most stable configurations using the quench approach but disagrees with a reference umbrella sampling calculation in high FE regions. We then show that combining quenching with umbrella sampling allows the efficient calculation of the free energy in all regions. Moreover, by using this combined scheme, we obtain the FES across a range of temperatures at no additional cost, making it much more efficient than standard umbrella sampling if this information is required. Finally, we discuss how this approach can be extended to solute tempering and demonstrate that it is highly accurate for the case of solvated alanine dipeptide without any additional modifications.

Chemistry↗
NASA NTRS1984

Vortex creep and the internal temperature of neutron stars. I - General theory

The theory of a neutron star superfluid coupled to normal matter via thermal creep against pinning forces is developed in some detail. General equations of motion for a pinned rotating superfluid and their form for vortex creep are given. Steady state creep and the way in which the system approaches the steady state are discussed. The developed formalism is applied to the postglitch relaxation of a pulsar, and detailed models are developed which permit explicit calculation of the postglitch response. The energy dissipation associated with creep and glitches is considered.

Alpar, M. A.↗
NASA NTRS1986

Aircraft Rollout Iterative Energy Simulation

Aircraft Rollout Iterative Energy Simulation (ARIES) program analyzes aircraft-brake performance during rollout. Simulates threedegree-of-freedom rollout after nose-gear touchdown. Amount of brake energy dissipated during aircraft landing determines life expectancy of brake pads. ARIES incorporates brake pressure, actual flight data, crosswinds, and runway characteristics to calculate following: brake energy during rollout for up to four independent brake systems; time profiles of rollout distance, velocity, deceleration, and lateral runway position; and all aerodynamic moments on aircraft. ARIES written in FORTRAN 77 for batch execution.

Kinoshita, L.↗
NASA NTRS2003

A miniaturized neuroprosthesis suitable for implantation into the brain

This paper presents current research on a miniaturized neuroprosthesis suitable for implantation into the brain. The prosthesis is a heterogeneous integration of a 100-element microelectromechanical system (MEMS) electrode array, front-end complementary metal-oxide-semiconductor (CMOS) integrated circuit for neural signal preamplification, filtering, multiplexing and analog-to-digital conversion, and a second CMOS integrated circuit for wireless transmission of neural data and conditioning of wireless power. The prosthesis is intended for applications where neural signals are processed and decoded to permit the control of artificial or paralyzed limbs. This research, if successful, will allow implantation of the electronics into the brain, or subcutaneously on the skull, and eliminate all external signal and power wiring. The neuroprosthetic system design has strict size and power constraints with each of the front-end preamplifier channels fitting within the 400 x 400-microm pitch of the 100-element MEMS electrode array and power dissipation resulting in less than a 1 degree C temperature rise for the surrounding brain tissue. We describe the measured performance of initial micropower low-noise CMOS preamplifiers for the neuroprosthetic.

Action Potentials/physiology↗
NASA NTRS2008

Analysis of Terrestrial Water Storage Changes from GRACE and GLDAS

Since March 2002, the Gravity Recovery and Climate Experiment (GRACE) has provided first estimates of land water storage variations by monitoring the time-variable component of Earth's gravity field. Here we characterize spatial-temporal variations in terrestrial water storage changes (TWSC) from GRACE and compare them to those simulated with the Global Land Data Assimilation System (GLDAS). Additionally, we use GLDAS simulations to infer how TWSC is partitioned into snow, canopy water and soil water components, and to understand how variations in the hydrologic fluxes act to enhance or dissipate the stores. Results quantify the range of GRACE-derived storage changes during the studied period and place them in the context of seasonal variations in global climate and hydrologic extremes including drought and flood, by impacting land memory processes. The role of the largest continental river basins as major locations for freshwater redistribution is highlighted. GRACE-based storage changes are in good agreement with those obtained from GLDAS simulations. Analysis of GLDAS-simulated TWSC illustrates several key characteristics of spatial and temporal land water storage variations. Global averages of TWSC were partitioned nearly equally between soil moisture and snow water equivalent, while zonal averages of TWSC revealed the importance of soil moisture storage at low latitudes and snow storage at high latitudes. Evapotranspiration plays a key role in dissipating globally averaged terrestrial water storage. Latitudinal averages showed how precipitation dominates TWSC variations in the tropics, evapotranspiration is most effective in the midlatitudes, and snowmelt runoff is a key dissipating flux at high latitudes. Results have implications for monitoring water storage response to climate variability and change, and for constraining land model hydrology simulations.

Syed, Tajdarul H.↗
NASA NTRS2009

A CFD Approach to Modeling Spacecraft Fuel Slosh

Energy dissipation and resonant coupling from sloshing fuel in spacecraft fuel tanks is a problem that occurs in the design of many spacecraft. In the case of a spin stabilized spacecraft, this energy dissipation can cause a growth in the spacecrafts' nutation (wobble) that may lead to disastrous consequences for the mission. Even in non-spinning spacecraft, coupling between the spacecraft or upper stage flight control system and an unanticipated slosh resonance can result in catastrophe. By using a Computational Fluid Dynamics (CFD) solver such as Fluent, a model for this fuel slosh can be created. The accuracy of the model must be tested by comparing its results to an experimental test case. Such a model will allow for the variation of many different parameters such as fluid viscosity and gravitational field, yielding a deeper understanding of spacecraft slosh dynamics. In order to gain a better understanding of the dynamics behind sloshing fluids, the Launch Services Program (LSP) at the NASA Kennedy Space Center (KSC) is interested in finding ways to better model this behavior. Thanks to past research, a state-of-the-art fuel slosh research facility was designed and fabricated at Embry Riddle Aeronautical University (ERAU). This test facility has produced interesting results and a fairly reliable parameter estimation process to predict the necessary values that accurately characterize a mechanical pendulum analog model. The current study at ERAU uses a different approach to model the free surface sloshing of liquid in a spherical tank using Computational Fluid Dynamics (CFD) methods. Using a software package called Fluent, a model was created to simulate the sloshing motion of the propellant. This finite volume program uses a technique called the Volume of Fluid (VOF) method to model the interaction between two fluids [4]. For the case of free surface slosh, the two fluids are the propellant and air. As the fuel sloshes around in the tank, it naturally displaces the air. Using the conservation of mass, momentum, and energy equations, as well as the VOF equations, one can predict the behavior of the sloshing fluid and calculate the forces, pressure gradients, and velocity field for the entire liquid as a function of time.

Marsell, Brandon↗
NASA NTRS1968

Design of dissipative linear phase filters

Set of design curves eliminates work involved in designing linear phase filters by being normalized in such a way as to apply to low, band, and high-pass filters of any bandwidth. Similar curves for any number of poles are plotted by solving a system of simultaneous equations.

Phares, R. L.↗
NASA NTRS1991

Damping of thermal acoustic oscillations in hydrogen systems

Acoustic waves initiated by a large temperature gradient along a tube are defined as thermal acoustic oscillations (TAOs). These oscillations have been damped by introducing such sound absorbing techniques as acoustic filters, resonators, etc.. These devices serve as an acoustic sink that is used to absorb or dissipate the acoustic energy thereby eliminating or damping such oscillations. Several empirical damping techniques, such as attaching a resonator as a side branch or inserting a wire in the tube, have been developed in the past and have provided reasonable success. However, the effect of connecting tube radius, length, and resonator volume on the damping of thermal acoustic oscillations has not been evaluated quantitatively. Further, these methods have not been effective when the oscillating tube radius was relatively large. Detailed theoretical analyses of these techniques including a newly developed method for damping oscillations in a tube of relatively large radius are provided in this presentation.

Gu, Youfan↗
NASA NTRS2000

Technical Challenges in Reliable Microelectronics Packaging of Microelectromechanical Systems (MEMS) for Space Applications

MEMS have shown a significant promise in the last decade for a variety of applications such as air-bag, pressure sensors, accelerometer, microgyro, chemical sensors, artificial nose, etc. Standard semiconductor microelectronics packaging needs the integrated circuits (IC) to be protected from the harsh environment, and provide electrical communication with the other parts of the circuit, facilitate thermal dissipation efficiently, and impart mechanical strength to the silicon die. Microelectronics packaging involves wafer dicing, bonding, lead attachment, encapsulation to protect from the environment, electrical integrity, and package leak tests to assure the reliable IC packaging technology. Active elements or microstructures in MEMS devices often interfaces with the hostile environment where packaging leak tests and testing of such devices using chemical and mechanical parameters will be very difficult and expensive. Packaging of MEMS is significantly complex as they serve to protect from the environment and microstructures interact with the same environment to measure or affect the desired physical or chemical parameters. The most of the silicon circuitry is sensitive to temperature, moisture, magnetic field, light, and electromagnetic interference. The package must then protect the on-board silicon circuitry while simultaneously exposing the microsensor to the effect it measures to assure the packaging technology of MEMS. MEMS technology has a major application in developing a microspacecraft for space systems provided reliability of MEMS packaging technology is sufficiently addressed. This MEMS technology would eventually miniaturize many of the components of the spacecraft to reach the NASA's goal by building faster, cheaper, better, smaller spacecraft to explore the space more effectively. This paper discusses the latest developments in the MEMS technology and challenging technical issues in the packaging of hermetically sealed and non-hermetically sealed MEMS sensor devices for microspacecraft applications.

Ramesham, Rajeshuni↗
NASA NTRS1977

Theoretical aspects of tidal and planetary wave propagation at thermospheric heights

A simple semiquantitative model is presented which allows analytic solutions of tidal and planetary wave propagation at thermospheric heights. This model is based on perturbation approximation and mode separation. The effects of viscosity and heat conduction are parameterized by Rayleigh friction and Newtonian cooling. Because of this simplicity, one gains a clear physical insight into basic features of atmospheric wave propagation. In particular, we discuss the meridional structures of pressure and horizontal wind (the solutions of Laplace's equation) and their modification due to dissipative effects at thermospheric heights. Furthermore, we solve the equations governing the height structure of the wave modes and arrive at a very simple asymptotic solution valid in the upper part of the thermosphere. That 'system transfer function' of the thermosphere allows one to estimate immediately the reaction of the thermospheric wave mode parameters such as pressure, temperature, and winds to an external heat source of arbitrary temporal and spatial distribution. Finally, the diffusion effects of the minor constituents due to the global wind circulation are discussed, and some results of numerical calculations are presented.

Volland, H.↗
NASA NTRS1982

GAS Verification Payload - From concept through flight

The GAS Verification Payload (GVP), successfully flown on STS-3, was the forerunner of the Get Away Special class of payloads. Intended to provide GAS experiments with flight environmental information, it also served to shape out the GAS support systems and establish areas of programmatic understanding between the GSFC, JSC, and KSC. Originally envisaged as using a sounding rocket build-it, test-it, fly-it approach with minimum paperwork, this naivete dissipated when faced with the manned space flight world of JSC. What evolved was an understanding by both disciplines that safety and reliability could be achieved at lower cost without compromise.

Hudgins, J. I.↗
NASA NTRS1984

A reappraisal of Darwin's fission hypothesis and a possible limit to the primordial angular momentum of the Earth

G. H. Darwin proposed that the primordial Earth may have rotated fast enough that the solar tidal period was nearly resonant with the fundamental free oscillation period of a fluid Earth and that a large and unstable tidal oscillation split off to become the moon. Jeffreys argumented that dissipation during resonance would be sufficient to prevent such an unstable oscillation greater than the tidal frequency (period - 2.68 hr). It is considered that solar tides have extracted angular momentum from the Earth-Moon system over 4.5 b.y. The correspondence of the primordial tidal and resonant frequencies is nearly exact. (The effect of central condensation of the proto earth is to increase both frequencies by a similar amount, though the resonance is not precisely known. This result, was unknown to Darwin or Jeffreys. The effects of resonance were evaluated. The resonance is likely to be too damped for fission. This argument is more general than Jeffreys', who considered friction between the oscillating mantle and a rigid core. It is argued that the fact that Q must be so great for fission that equilibrium can not be maintained; the fluid proto Earth passes so quickly through resonance that maximum amplitude is not reached. It is suggested that solar resonant tides acted as a brake on the spin of the primordial partially molten Earth. Certain proposed origins for the Moon do not necessarily involve addition of substantial amounts of angular momentum to the Earth-Moon system. The primordial Earth-Moon system may have had nearly the same angular momentum as it has today.

Mckinnon, W. B.↗
NASA NTRS1986

Has Nemesis' orbit been detected?

The orbital angular momenta of 126 very young comets are calculated from the orbital data of Marsden and Roemer (1982) and analyzed statistically. A large anisotropy is detected in a plane almost perpendicular to the ecliptic and shown to have a characteristic dissipation lifetime of 10-30 Myr. Dynamic evolution computations indicate that the impulse which produced the anisotropy is that of a very slow massive (10-90 Jupiter mass) body, which is bound to the solar system, passed its 15,000-35,000-AU perihelion about 2-15 Myr ago, and has period 5-50 Myr. It is suggested that this body could well be identical to Nemesis, the object proposed to explain mass faunal extinctions.

Delsemme, A. H.↗