Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diamond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Low Energy Sputter Yields for Diamond, Carbon-Carbon Composite, and Molybdenum Subject to Xenon Ion Nombardment

Sputter yields have been measured for polycrystalline diamond, single crystal diamond, a carbon-carbon composite, and molybdenum subject to bombardment with xenon. The tests were performed using a 3 cm Kaufman ion source to produce incident ions with energy in the range of 150 - 750 eV and profilometry based technique to measure the amount of sputtered material.

sputter yields Diamond Molybdenum subject Xenon Io↗

(abstract) Evaluation and Development of Diamond Grids for Ion Optics

A research program is underway to establish the feasibility of fabricating 15 cm diameter ion engine optics from polycrystalline diamond film. Because of its high thermal conductivity, low CTE, and low sputter yield, diamond film has the potential of mitigating life limiting and performance degrading processes which have hindered flight qualification of ion thrusters to date. Results of experiments are reported.

ion engines diamond films ion optics fabrication f↗

X-ray emission spectroscopy with a laser-heated diamond anvil cell: a new experimental probe of the spin state of iron in the Earth's interior

Synchrotron-based X-ray emission spectroscopy (XES) is well suited to probing the local electronic structure of 3d transition metals such as Fe and Mn in their host phases. The laser-heated diamond anvil cell technique is uniquely capable of generating ultra-high static pressures and temperatures in excess of 100 GPa and 3000 K. Here X-ray emission spectroscopy and X-ray diffraction have been interfaced with the laser-heated diamond cell for studying the electronic spin states of iron in magnesiowuestite-(Mg{sub 0.75},Fe{sub 0.25})O and its crystal structure under lower-mantle conditions. X-ray emission spectra of the ferrous iron in a single crystal of magnesiowuestite-(Mg{sub 0.75},Fe{sub 0.25})O indicate that a high-spin to low-spin transition of ferrous iron occurs at 54 to 67 GPa and 300 K and the ferrous iron remains in the high-spin state up to 47 GPa and 1300 K. This pilot study points to the unique capability of the synchrotron-based XES and X-ray diffraction techniques for addressing the issue of electronic spin transition or crossover in 3d transition metals and compounds under extreme high-P-T conditions.

36 MATERIALS SCIENCE↗

Simulations of Charge Gain and Collection Efficiency from Diamond Amplifiers

A promising new concept of a diamond amplified photocathode for generation of high-current, high-brightness, and low thermal emittance electron beams was recently proposed and is currently under active development. To better understand the different effects involved, we have been developing models, within the VORPAL computational framework, to simulate secondary electron generation and charge transport in diamond. The implemented models include inelastic scattering of electrons and holes for generation of electron-hole pairs, elastic, phonon, and charge impurity scattering. We will discuss these models and present results from 3D VORPAL simulations on charge gain and collection efficiency as a function of primary electron energy and applied electric field. The implemented modeling capabilities already allow us to investigate specific effects and compare simulation results with experimental data.

43 PARTICLE ACCELERATORS↗

Single-crystal CVD diamond detector for low-energy charged particles with energies ranging from 100 keV to 2 MeV

The performance of a diamond detector made of a single-crystal diamond grown by chemical vapor deposition was studied for charged particles, having energies ranging from 100 keV to 2 MeV. Energy peaks of these low-energy ions were clearly observed. However, we observed that the pulse height for individual incident ion decreases with increasing atomic number of the ions. We estimated the charge collection efficiency of the generated charge carriers by charged particle incident. The charge collection above ∼95% is achieved for helium (He{sup +}) with the energy above 1.5 MeV. On the other hand, the charge collection efficiency for heavy-ions shows wrong values compared with that of He{sup +}, ∼70% for silicon (Si{sup +}) and 35 to 40% for gold (Au{sup 3+}), at the same incident energy range, respectively. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diamond dose rate detector testing at KURRI- A joint UK-Japan research project - 17126

Measurements of radiation dose rates in highly active environments, such as nuclear plant decommissioning or following a nuclear disaster, is challenging due to the extreme environments encountered and restricted access. Therefore, novel radiation detector technology is required to address these challenges. One such example of a radiation detection material is diamond, as it is able to withstand and measure high radiation intensities, is chemically inert and formable into extremely small, sensitive detectors. These detectors generate small currents when exposed to radiation, and if the radiation levels are high enough this can be measured. Testing of such detectors is not possible in routine laboratories due to the requirement to have high active radiation sources. However, through a new collaboration formed through the University of Bristol- Kyoto University bilateral symposia such facilities are accessible for UK researchers at Kyoto University Research Reactor Institute. This paper presents an overview of the collaborative research project, the accessible facilities for device manufacture and testing and some early results from radiation testing of diamond detectors at KURRI. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diamond-based radiation detectors for very high dose rate environments- 16207

Diamond detectors offer a novel technology allowing the non-destructive assay of highly radioactive environments in the civil nuclear sector. Four detectors of different manufacturing origins have been characterised using dark current measurements and dose rate response in controlled environments. Results show the electrode material and contacts to the electrode are critical in achieving a reliable and stable detection device. This work demonstrates that diamond detectors offer considerable promise for civil nuclear applications, where high dose rate measurements are required. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Demonstration of a diamond anvil cell platform at the Linac Coherent Light Source: Capabilities and Outlook

A novel x-ray free electron laser (XFEL) diffraction setup for use with diamond anvil cells (DACs) at the Linac Coherent Light Source (LCLS) is described. Using the new diamond window at the Matter at Extreme Conditions (MEC) instrument, it allows hard x-ray experiments on DACs to be performed in air. The platform is described along with alignment and calibration procedures and details of the x-ray beam and diagnostics. Example data are presented, including a reversible XFEL induced phase transition in CsPbI3. The DAC setup was commissioned at MEC, but is applicable to most LCLS instruments where the unique pulse structures available at LCLS offer access to new ultrafast experimental techniques at high pressure.

Diamond Anvil Cells, LCLS, XFEL, High-Pressure↗

Probing the Electronic Structures of [Cmu(Mu-XR(2)]**N+ Diamond Cores As a Function of the Bridging X Atom (X = N Or P) And Charge (N=0, 1, 2)

A series of dicopper diamond core complexes that can be isolated in three different oxidation states ([Cu{sub 2}({mu}-XR{sub 2})]{sup n+}, where n = 0, 1, 2 and X = N or P) is described. Of particular interest is the relative degree of oxidation of the respective copper centers and the bridging XR{sub 2} units, upon successive oxidations. These dicopper complexes feature terminal phosphine and either bridging amido or phosphido donors, and as such their metal-ligand bonds are highly covalent. Cu K-edge, Cu L-edge, and P K-edge spectroscopies, in combination with solid-state X-ray structures and DFT calculations, provides a complementary electronic structure picture for the entire set of complexes that tracks the involvement of a majority of ligand-based redox chemistry. The electronic structure picture that emerges for these inorganic dicopper diamond cores shares similarities with the Cu{sub 2}({mu}-SR){sub 2} Cu{sub A} sites of cytochrome c oxidases and nitrous oxide reductases.

59 BASIC BIOLOGICAL SCIENCES↗

Run-In Behavior of Nanocrystalline Diamond Coatings Studied By in Situ Tribometry

The friction performance of nanocrystalline diamond coatings was evaluated using in situ tribometry with sapphire counterfaces. Coatings were grown by microwave plasma assisted chemical vapor deposition in an Ar-H-CH{sub 4} plasma, with H ranging from 0 to 36%. In situ examination of the sliding contact, combined with ex situ analysis of the sapphire counterface revealed that the velocity accommodation mode was interfacial sliding of a carbonaceous transfer film versus the coating wear track. For most tests, the contact diameter increased during the first 50 sliding cycles and then remained constant. The in situ measure of the contact diameter was found to correlate confidently to ex situ measurements of counterface wear. The performance of the diamond coatings, characterized by quick run-in to low friction was best when a small but detectable graphite peak was present in the X-ray diffraction (XRD) profile. The relative intensity of the XRD graphite peak was also found to directly correlate with the peak position of the C1s {yields} {pi}* transition as measured by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Increasing the relative amount of graphite-bonded sp{sup 2} carbon in the NCD films decreased run-in cycles to low friction.

36 MATERIALS SCIENCE↗

3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier

The Relativistic Heavy Ion Collider (RHIC) contributes fundamental advances to nuclear physics by colliding a wide range of ions. A novel electron cooling section, which is a key component of the proposed luminosity upgrade for RHIC, requires the acceleration of high-charge electron bunches with low emittance and energy spread. A promising candidate for the electron source is the recently developed concept of a high quantum efficiency photoinjector with a diamond amplifier. To assist in the development of such an electron source, we have implemented algorithms within the VORPAL particle-in-cell framework for modeling secondary electron and hole generation, and for charge transport in diamond. The algorithms include elastic, phonon, and impurity scattering processes over a wide range of charge carrier energies. Results from simulations using the implemented capabilities will be presented and discussed.

18-FDG↗

Carbon ion beam focusing using laser irradiated heated diamond hemispherical shells

Experiments preformed at the Los Alamos National Laboratory's Trident Laser Facility were conducted to observe the acceleration and focusing of carbon ions via the TNSA mechanism using hemispherical diamond targets. Trident is a 200TW class laser system with 80J of 1 {micro}m, short-pulse light delivered in 0.5ps, with a peak intensity of 5 x 10{sup 20} W/cm{sup 2}. Targets where Chemical Vapor Deposition (CVD) diamonds formed into hemispheres with a radius of curvature of 400{micro}m and a thickness of 5{micro}m. The accelerated ions from the hemisphere were diagnosed by imaging the shadow of a witness copper mesh grid located 2mm behind the target onto a film pack located 5cm behind the target. Ray tracing was used to determine the location of the ion focal spot. The TNSA mechanism favorably accelerates hydrogen found in and on the targets. To make the carbon beam detectable, targets were first heated to several hundred degrees Celsius using a CW, 532nm, 8W laser. Imaging of the carbon beam was accomplished via an auto-radiograph of a nuclear activated lithium fluoride window in the first layer of the film pack. The focus of the carbon ion beam was determined to be located 630 {+-} 110 {micro}m from the vertex of the hemisphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3D‐Mapping and Manipulation of Photocurrent in an Optoelectronic Diamond Device

Abstract Establishing connections between material impurities and charge transport properties in emerging electronic and quantum materials, such as wide‐bandgap semiconductors, demands new diagnostic methods tailored to these unique systems. Many such materials host optically‐active defect centers which offer a powerful in situ characterization system, but one that typically relies on the weak spin‐electric field coupling to measure electronic phenomena. In this work, charge‐state sensitive optical microscopy is combined with photoelectric detection of an array of nitrogen‐vacancy (NV) centers to directly image the flow of charge carriers inside a diamond optoelectronic device, in 3D and with temporal resolution. Optical control is used to change the charge state of background impurities inside the diamond on‐demand, resulting in drastically different current flow such as filamentary channels nucleating from specific, defective regions of the device. Conducting channels that control carrier flow, key steps toward optically reconfigurable, wide‐bandgap optoelectronics are then engineered using light. This work might be extended to probe other wide‐bandgap semiconductors (SiC, GaN) relevant to present and emerging electronic and quantum technologies.

Wood, Alexander A.↗

Isotopic fractionation of oxygen and carbon in decomposed lower-mantle inclusions in diamond

Two carbonatitic mineral assemblages, calcite + wollastonite and calcite + monticellite, which are encapsulated in two diamond grains from the Rio Soriso basin in the Juina area, Mato Grosso State, Brazil, were studied utilizing the NanoSIMS technique. The assemblages were formed as the result of the decomposition of the lower-mantle assemblage calcite + CaSi-perovskite + volatile during the course of the diamond ascent under pressure conditions from 15 to less than 0.8 GPa. The oxygen and carbon isotopic compositions of the studied minerals are inhomogeneous. They fractionated during the process of the decomposition of primary minerals to very varying values: δ 18 O from –3.3 to +15.4 ‰ SMOW and δ 13 C from –2.8 to +9.3 ‰ VPDB. As a result, these values significantly extend the mantle values for these elements in both isotopically-light and isotopically-heavy areas.

58 GEOSCIENCES↗

Pulse laser induced graphite-to-diamond phase transition: the role of quantum electronic stress

First-principles calculations show that the pulse laser induced graphite-to-diamond phase transition is related to the lattice stress generated by the excited carriers, termed as “quantum electronic stress (QES)”. We found that the excited carriers in graphite generate a large anisotropic QES that increases linearly with the increasing carrier density. Using the QES as a guiding parameter, structural relaxation spontaneously transforms the graphite phase into the diamond phase, as the QES is reduced and minimized. Our results suggest that the concept of QES can be generally applied as a good measure to characterize the pulse laser induced phase transitions, in analogy to pressure induced phase transitions.

Wang, ZhengFei↗

Cross talk between TP53 and c-Myc in the pathophysiology of Diamond-Blackfan anemia: Evidence from RPL11-deficient in vivo and in vitro models

Highlights: • RPL11 gene is mutated in Diamond-Blackfan anemia (DBA). • Rpl11-deficient zebrafish displays defects in ribosome biogenesis and blood synthesis. • Tp53 and c-Myc synthesis are upregulated in Rpl11-deficient zebrafish. • c-Myc target proteins trigger a p53 pathway in response to RPL11 deficiency. • Induction of Tp53 mediates the morphological but not erythroid defects. Mutations in genes encoding ribosomal proteins have been identified in Diamond-Blackfan anemia (DBA), a rare genetic disorder that presents with a prominent erythroid phenotype. TP53 has been implicated in the pathophysiology of DBA with ribosomal protein (RP) L11 playing a crucial role in the TP53 response. Interestingly, RPL11 also controls the transcriptional activity of c-Myc, an oncoprotein that positively regulates ribosome biogenesis. In the present study, we analyzed the consequences of rpl11 depletion on erythropoiesis and ribosome biogenesis in zebrafish. As expected, Rpl11-deficient zebrafish exhibited defects in ribosome biogenesis and an anemia phenotype. However, co-inhibition of Tp53 did not alleviate the erythroid aplasia in these fish. Next, we explored the role of c-Myc in RPL11-deficient cellular and animal models. c-Myc and its target nucleolar proteins showed upregulation and increased localization in the head region of Rpl11-deficient zebrafish, where the morphological abnormalities and tp53 expression were more pronounced. Interestingly, in blood cells derived from DBA patients with mutations in RPL11, the biogenesis of ribosomes was defective, but the expression level of c-Myc and its target nucleolar proteins was unchanged. The results suggest a model whereby RPL11 deficiency activates the synthesis of c-Myc target nucleolar proteins, which subsequently triggers a p53 response. These results further demonstrate that the induction of Tp53 mediates the morphological, but not erythroid, defects associated with RPL11 deficiency.

60 APPLIED LIFE SCIENCES↗

The effect of grain boundaries and adsorbates on the electrical properties of hydrogenated ultra nano crystalline diamond.

The results of a comprehensive study on the temperature dependence of the electrical properties of hydrogenated and air exposed undoped UNCD layers following heating/cooling cycles are presented. The results clearly show that, in contrast to hydrogenated and air exposed single crystal type IIa diamond, which exhibits a clear highly conductive p-type surface layer, the electrical properties of hydrogen and H{sub 2}O exposure of UNCD are determined by the properties of the entire layer. The changes in the electrical conductivity of UNCD as a result of heating are governed by two different processes: (i) Loss of water from the external surface that takes place at about 150 C. This process is reversible, reviving the electrical properties upon exposure to humidity, just like in single crystalline diamond.(ii) Modification of the inter-grain material, which occurs at higher temperatures possibly due to H diffusion and passivation of some dangling bonds in the inter-grain material. This increases the resistivity in an irreversible manner. The conduction mechanism in the inter-grain material is characterized by variable range hopping in band tails thus indirectly proving that the material between the grains is some kind of amorphous carbon.

08 HYDROGEN↗

Synthesis, structure, linear and nonlinear optical properties of noncentrosymmetric quaternary diamond-like semiconductors, Cu 2 ZnGeSe 4 (CZGSe) and the novel Cu 4 ZnGe 2 Se 7

In this work, two quaternary diamond-like semiconductors (DLSs) in the Cu-Zn-Ge-Se system, the known Cu 2 ZnGeSe 4 (also referred to as CZGSe) and the new Cu 4 ZnGe 2 Se 7 , are compared in terms of their crystal structures, electronic structures and physicochemical properties. Both compounds were prepared by high-temperature, solid-state synthesis at 800 degrees C. Single crystal X-ray diffraction was used to determine the structure of Cu 4 ZnGe 2 Se 7 . The structures of both Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 can be considered as derivatives of cubic diamond. Cu 4 ZnGe 2 Se 7 , with a reduced symmetry due to the cation ordering pattern, adopts the Cu 4 NiSi 2 S 7 structure type, with space group C2. The corner-sharing tetrahedra in Cu 4 ZnGe 2 Se 7 are slightly distorted because the charge for some of the S 2 - anions is not compensated by the first-nearest-neighbor cations. Rietveld refinements using synchrotron X-ray powder diffraction data were used to assess the phase purity of the samples and confirm the bulk structural behavior. Diffuse reflectance UV/Vis/NIR spectroscopy shows that Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 have direct optical bandgaps of 1.38 and 0.91 eV, respectively. Electronic structure calculations implementing density functional theory confirm the direct bandgap for Cu 4 ZnGe 2 Se 7 , with a calculated value of 0.62 eV. Both compounds are air stable, thermally stable up to relatively high temperatures, undergo phase transitions and have wide windows of optical clarity. The Kurtz-Perry powder technique was used to determine the second harmonic generation (SHG) responses using a commercial AgGaSe 2 standard. While Cu 4 ZnGe 2 Se 7 displays a weak SHG response, Cu 2 ZnGeSe 4 exhibits a response that is greater than several benchmark materials, with a large SHG coefficient, χ (2) , of 43 ± 6 pm/V at λ = 2900 nm.

36 MATERIALS SCIENCE↗