Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A Stokes' velocity photographic method for measuring the size distribution of aerosols

Aerosol particles are allowed to settle in a vertical glass walled vessel, and their settling velocity is determined by photographing them while the light entering the camera is being chopped at a known rate. The settling velocity of each particle can be determined from the photographs, and by applying the Stokes' law, one can calculate the radius of each particle. The Stokes' law for a sphere settling freely in a quiet medium is given. If the volume of the photographed region of the illumination is known, the aerosol number density and size distribution can be obtained. Experiments with alumina particles of given size distributions indicate that the method works accurately. One set of a typical experiment with 3.0-micrometer Al2O3 particles is presented, which shows that the measured size distribution peaks at approximately 3.0 micrometer.

Deepak, A.↗
NASA NTRS1990

Circumnuclear molecular gas in starburst and Seyfert galaxies

In order to investigate circumnuclear molecular gaseous contents and their relation to the nuclear activity, researchers made a search for circumnuclear (12)CO (J=1-0) emission from 28 starburst-nucleus galaxies (SBNs) and 12 Seyfert galaxies with the recession velocities less than 5000 km/s, using the Nobeyama Radio Observatory 45-m telescope. The full half-power beam width of 17 arcsec covers a region of less than about 5 kpc in diameter for the sample galaxies. The circumnuclear CO emission was detected from twelve SBNs (one is marginal) and four Seyfert galaxies. The main results and conclusions are summarized. Researchers derived the circumnuclear surface density of molecular gas which is corrected for inclination of the galaxies. This analysis shows that the surface density spans a wide range over two orders of magnitude. Further, there is no significant difference in the surface densities between types 1 and 2 Seyfert galaxies. Thus, we may conclude that the circumnuclear molecular content is not a key parameter producing the dichotomy of the Seyfert galaxies. It is also shown that there is no significant difference in the circumnuclear surface densities of molecular gas among the Seyfert, starburst, and normal galaxies. This implies that the circumnuclear gaseous content is not a key parameter determining which activity occurs in nuclei. We may conclude that more centrally condensed (i.e., less than 10 - 100 pc in diameter) gas components play an essential role on the occurrence of nuclear activities. Comparing results with the previous ones, researchers deduced radial distribution of surface density of molecular gases. They cannot obtain evidence for strong central concentration of molecular gas in the sample Seyfert galaxies except for NGC 3227. This is consistent with the previous result by Blitz, Mathieu, and Bally (1986). Comparing the CO emission line profiles with the previous ones taken with the larger beams, researchers discovered circumnuclear components of molecular gases. In particular, they found that molecular gas clouds may be absent in the SE of the nucleus of NGC 7469 where the high-excitation emitting region is discovered by Heckman et al. (1986). It is suggested that the nuclear activity (strong radiation and/or wind) may destruct the molecular clouds in that region.

Taniguchi, Yoshiaki↗
NASA NTRS1991

Bounds on intergalactic compact objects from observations of compact radio sources

The constraints that can be imposed on the cosmic density of uniformly distributed intergalactic compact objects in the mass range of 10 million to 1 billion solar masses, using VLBI observations of compact radio sources. A compact object at a sufficiently small angular separation from a compact radio source produces a deamplified and inverted secondary image. No such cases are known. Using published maps of compact radio sources and assuming an Einstein-de Sitter cosmology, a density parameter for mass in this range greater than 0.4 is excluded at the 99.7 percent confidence level. Observations using the VLBA should allow one to exclude or discover a density parameter greater than about 0.001 for compact objects in the mass range of 0.1-100 solar masses.

Kassiola, Aggeliki↗
NASA NTRS1993

Study of auroral dynamics with combined spacecraft and incoherent-scatter radar data

We have examined Sondrestrom incoherent-scatter radar observations of ionospheric plasma density and temperature distributions, as well as measurements of F-region ion drifts that were made during a prenoon pass by the DMSP-F7 satellite through the radar field of view. The spacecraft traversed a region of intense electron precipitation with a characteristic energy below approximately 200 eV. Particles with such low characteristic energies are believed to originate, either directly or indirectly, in the magnetosheath. The precipitation region had a width of about 2 deg invariant latitude. The corotating radar observed a patch of enhanced electron density and elevated electron temperature in the F2 region between about 10.5 and 12 magnetic local time in the same invariant latitude range where DMSP-F7 detected the soft-electron flux. The ion drift pattern, also obtained by radar, shows that it is unlikely that the plasma patch was produced by solar radiation and advected into the radar field of view. We suggest that the radar observed modifications of the ionospheric plasma distribution, which resulted from direct entry of magnetosheath electrons into the magnetosphere and down to ionospheric altitudes. Model calculations of the ionospheric response to the observed electron flux support our interpretation.

Watermann, Juergen↗
NASA NTRS1991

The free compressible viscous vortex

The present study investigates the effects of compressibility on free (unsteady) viscous heat-conducting vortices. Analytical solutions are found in the limit of large but finite Reynolds number and small but finite Mach number. It is shown that the spreading of the vortex causes a radial flow. This flow is given by the solution of an ordinary differential equation, which gives the dependence of the radial velocity on the tangential velocity, density, and temperature profiles of the vortex. Estimates of the radial velocity found by solving this equation are found to be in good agreement with numerical solutions of the full equations. The equations for the viscous evolution are expanded in powers of Mach number to obtain detailed analytical solutions. It is shown that swirling axisymmetric compressible flows generate negative radial velocities far from the vortex core owing to viscous effects, regardless of the initial distributions of vorticity, density, and entropy.

Colonius, Tim↗
NASA NTRS1994

Ionospheric footprint of magnetosheathlike particle precipitation observed by an incoherent scatter radar

We have examined Sondrestrom incoherent scatter radar observations of ionospheric plasma density and temperature distributions and measurements of F region ion drifts that were made during a prenoon pass of the Defense Meteorological Satellite Program (DMSP)-F7 satellite through the radar field of view. The spacecraft traversed a region of intense electron precipitation with a characteristic energy below approximately 200 eV. Particles with such low characteristic energies are believed to be directly or indirectly of magnetosheath origin. The precipitation region had a width about 2 deg invariant latitude and covered the low-latitude boundary layer (LLBL), the cusp, and the equatorward section of the plasma mantle (PM). The corotating radar observed a patch of enhanced electron density and elevated electron temperature in the F2 region between about 10.5 and 12 magnetic local time in the same invariant latitude range where DMSP-F7 detected the soft-electron flux. The ion drift pattern, also obtained by radar, shows that it is unlikely that the plasma patch was produced by solar radiation and advected into the radar field of view. We suggest that the radar observed modifications of the ionospheric plasma distribution, which resulted from direct entry of magnetosheath electrons into the magnetosphere and down to ionospheric altitudes. Model calculations of the ionospheric response to the observed electron precipitation support our interpretation. The spectral characteristics of the electron flux in the LLBL, cusp, and equatorward section of the PM were in this case too similar to allow to distinguish between them by using incoherent scatter radar measurements only.

Watermann, Jurgen↗
NASA NTRS1993

Origin and maintenance of the oxygen torus in Saturn's magnetosphere

Observations of thermal ions in Saturn's inner magnetosphere suggest distributed local sources rather than diffusive mass loading from a source located further out. We suggest that the plasma is produced and maintained mainly by 'self-sputtering' of E ring dust. Sputtered particles are 'picked up' by the planetary magnetospheric field and accelerated to corotation energies (of the order of 8 eV/amu). The sputter yield for oxygen on ice at, for example, 120 eV is about 5, which implies that an avalanche of self-sputtering occurs. The plasma density is built up until it is balanced by local losses, presumably pitch angle scattering into the loss cone and absorption in the planet's ionosphere. The plasma density determines the distribution of dust in the E ring through plasma drag. Thus a feedback mechanism between the plasma and the E ring dust is established. The model accounts for the principal plasma observations and simultaneously the radial optical depth profile of the E ring.

Morfill, G. E.↗
NASA NTRSDate not supplied

Consequences of Asteroid Characterization on the State of Knowledge about Inferred Physical Properties and Impact Risk

Physical characteristics of Near-Earth Objects (NEOs) are essential inputs to planetary defense assessments. The size, density, and strength of an NEO are critical inputs to modeling behavior during atmospheric entry as well as assessing the risk of impact. Similarly, knowledge of the physical characteristics of an object are necessary to evaluate the probable result of a mitigation mission. Usually, these attributes cannot be directly measured, but increasingly sophisticated methods have been developed to infer physical properties from related measurements of asteroids, meteors, and/or meteorites. Fortuitously, some of these measurements have been obtained for enough NEOs to elucidate the distribution of values across the sampled population. However, the situation becomes more challenging when considering a specific asteroid, since it is unlikely that all the relevant measurements have been made for any given object. We have developed a Bayesian network that can combine available information about a particular NEO with knowledge of the larger population to infer probabilistic values and uncertainties for physical characteristics of interest. Distributions of asteroid population albedos, taxonomic classes, and macroporosities, along with meteorite density distributions and associations between taxonomic classes and meteorite classes, provide the default distributions for the network’s parameter nodes. The inference network links parameters for each virtual asteroid either deterministically or probabilistically as appropriate, and eliminates any unphysical combinations of parameters. Within the context of planetary defense, our Bayesian network can be used to constrain the ranges of likely impactor properties, which can subsequently reduce the uncertainty in modelling of atmospheric entry, mitigation efficacy, and impact risk assessment. When additional measurements become available for a specific object, the network incorporates those measurements to generate virtual asteroids with property distributions that are consistent with the measurements. We will use the 2023 PDC scenario to demonstrate how the inference network can be combined with plausible characterization measurements to refine the state of knowledge about likely combinations of physical parameters and the resulting impact risk.

risk assessment↗
NASA NTRSDate not supplied

Consequences of Asteroid Characterization on the State of Knowledge about Inferred Physical Properties and Impact Risk

Physical characteristics of Near-Earth Objects (NEOs) are essential inputs to planetary defense assessments. The size, density, and strength of an NEO are critical inputs to modeling behavior during atmospheric entry as well as assessing the risk of impact. Similarly, knowledge of the physical characteristics of an object are necessary to evaluate the probable result of a mitigation mission. Usually, these attributes cannot be directly measured, but increasingly sophisticated methods have been developed to infer physical properties from related measurements of asteroids, meteors, and/or meteorites. Fortuitously, some of these measurements have been obtained for enough NEOs to elucidate the distribution of values across the sampled population. However, the situation becomes more challenging when considering a specific asteroid, since it is unlikely that all the relevant measurements have been made for any given object. We have developed a Bayesian network that can combine available information about a particular NEO with knowledge of the larger population to infer probabilistic values and uncertainties for physical characteristics of interest. Distributions of asteroid population albedos, taxonomic classes, and macroporosities, along with meteorite density distributions and associations between taxonomic classes and meteorite classes, provide the default distributions for the network’s parameter nodes. The inference network links parameters for each virtual asteroid either deterministically or probabilistically as appropriate, and eliminates any unphysical combinations of parameters. Within the context of planetary defense, our Bayesian network can be used to constrain the ranges of likely impactor properties, which can subsequently reduce the uncertainty in modelling of atmospheric entry, mitigation efficacy, and impact risk assessment. When additional measurements become available for a specific object, the network incorporates those measurements to generate virtual asteroids with property distributions that are consistent with the measurements. We will use the 2023 PDC scenario to demonstrate how the inference network can be combined with plausible characterization measurements to refine the state of knowledge about likely combinations of physical parameters and the resulting impact risk.

risk assessment↗
NASA NTRS2016

Photospheric Current Spikes and Their Possible Association with Flares - Results from an HMI Data Driven Model

A data driven, near photospheric magnetohydrodynamic model predicts spikes in the horizontal current density, and associated resistive heating rate per unit volume Q. The spikes appear as increases by orders of magnitude above background values in neutral line regions (NLRs) of active regions (ARs). The largest spikes typically occur a few hours to a few days prior to M or X flares. The spikes correspond to large vertical derivatives of the horizontal magnetic field. The model takes as input the photospheric magnetic field observed by the Helioseismic & Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) satellite. This 2.5 D field is used to determine an analytic expression for a 3 D magnetic field, from which the current density, vector potential, and electric field are computed in every AR pixel for 14 ARs. The field is not assumed to be force-free. The spurious 6, 12, and 24 hour Doppler periods due to SDO orbital motion are filtered out of the time series of the HMI magnetic field for each pixel using a band pass filter. The subset of spikes analyzed at the pixel level are found to occur on HMI and granulation scales of 1 arcsec and 12 minutes. Spikes are found in ARs with and without M or X flares, and outside as well as inside NLRs, but the largest spikes are localized in the NLRs of ARs with M or X flares. The energy to drive the heating associated with the largest current spikes comes from bulk flow kinetic energy, not the electromagnetic field, and the current density is highly non-force free. The results suggest that, in combination with the model, HMI is revealing strong, convection driven, non-force free heating events on granulation scales, and that it is plausible these events are correlated with subsequent M or X flares. More and longer time series need to be analyzed to determine if such a correlation exists. Above an AR dependent threshold value of Q, the number of events N(Q) with heating rates greater than or equal to Q obeys a scale invariant power law distribution for each AR given by N(Q) varies Q(sup -s), where 0.40 less than or equal to S less than or equal to 0.53, with a mean and standard deviation across the 14 ARs of 0.47 and 0.045, showing there is little variation of S from one AR to another. These properties of N(Q) are in close agreement with those of the distribution N(E) for the total energy E of solar flares, determined from observations to be N(E) = constant x E(sup -alpha). From observations of nanoflares in the 0.7 to 4 MK range, and from observations of flares in hard X-rays, it is found that 0.51 less than or equal to alpha less than or equal to 0.57, and 0.4 less than or equal to alpha less than or equal to 0.6, respectively (Crosby et al. 1993, Sol. Phys., 143, 275; Aschwanden & Parnell 2002, ApJ, 572, 1048). Observations also show that, as is found here for the exponent S, there is little variation of alpha with AR (Wheatland 2000, ApJ, 532, 1209), indicating N(E) and N(Q) are largely independent of individual properties of ARs such as area, total magnetic flux, and distribution of current density (i.e. non-potentiality). Therefore the power law scaling of the photospheric heating rate Q computed here on granulation scales is essentially identical to that found for coronal observations of flare energies on scales 1-2 orders of magnitude larger. This suggests the physical mechanisms that cause Q and coronal flares are closely related. It seems likely that Q is the signature of a magnetic reconnection process in an energy range and volume orders of magnitude smaller than those of flares. In this context, at least the larger spikes in Q might be signatures of UV photospheric or lower chromospheric bombs in which plasma is heated to temperatures approximately 10(exp -5) K (Peter et al. 2014, Science 346, 1255726; Judge 2015, ApJ, 808, 116). In addition, lattice based avalanche simulations of flare energy release predict 0.4 less than or equal to alpha less than or equal to 0.5, while analytic, fractal-diffusive self-organized criticality models predict 0.4 less than or equal to alpha less than or equal to 0.67, in excellent agreement with observations, and the results presented here (Aschwanden & Parnell 2002, ApJ, 572, 1048; Aschwanden 2012, A&A, 539, A2; Aschwanden 2013, in "Self Organized Criticality Systems"; Aschwanden et al. 2016, SSR, 198, 47).

Goodman, Michael↗
NASA NTRS1976

A non-gaussian model of continuous atmospheric turbulence for use in aircraft design

A non-Gaussian model of atmospheric turbulence is presented and analyzed. The model is restricted to the regions of the atmosphere where the turbulence is steady or continuous, and the assumptions of homogeneity and stationarity are justified. Also spatial distribution of turbulence is neglected, so the model consists of three independent, stationary stochastic processes which represent the vertical, lateral, and longitudinal gust components. The non-Gaussian and Gaussian models are compared with experimental data, and it is shown that the Gaussian model underestimates the number of high velocity gusts which occur in the atmosphere, while the non-Gaussian model can be adjusted to match the observed high velocity gusts more satisfactorily. Application of the proposed model to aircraft response is investigated, with particular attention to the response power spectral density, the probability distribution, and the level crossing frequency. A numerical example is presented which illustrates the application of the non-Gaussian model to the study of an aircraft autopilot system. Listings and sample results of a number of computer programs used in working with the model are included.

Reeves, P. M.↗
NASA NTRS2000

Assessment of Internal Fabric of Particulate Materials

Particle arrangement and distribution within a soil matrix has long been recognized as having significant influence on the mechanical behavior of cohesionless soils. It is well known that two soil specimens having the same grain type (e.g., quartz, feldspar, etc.), same grain size distribution and relative density (or void ratio) can display completely different mechanical behavior. Because of the different fabric configurations in the otherwise similar specimens, they are likely to have different mechanical properties such as stress-strain response, anisotropy, dilatancy, etc. Soil Fabric is defined as the arrangement of particles, particle groups and associated pore space. In the literature, fabric analysis techniques are mainly classified as destructive (e.g., specimen stabilization, thin-sectioning, and microscopy), and nondestructive techniques (e.g., magnetic resonance imaging, ultrasonic testing, x-ray radiography, and computed tomography). Quantifying the void ratio and its distribution is the main parameter used to describe the fabric of particulate materials. This paper presents a comprehensive literature review of fabric analysis techniques applied to particulate materials. In addition, the results of a comprehensive investigation to quantify void ratio of sand specimens will be presented and discussed. The sand used in the experiments in a natural, uniform rounded to sub-rounded silica sand known as F-75 banding sand with mean particle size of 0.22 mm. Uniform specimens and specimens subjected to different axial-strain levels tested under triaxial and biaxial conditions are examined to evaluate void ratio evolution and its distribution using destructive thin-sectioning and nondestructive Computed Tomography (CT) techniques. Details of a new innovative polygon generation technique called Voronoi tessellation used to quantify void ratio of microscopic images of sand grains will be presented and compared to classical Oda's method. Finally, frequency distribution of void ratio calculated using CT analysis will be presented and discussed.

Alshibi, Khalid A.↗
NASA NTRS1993

The Lyman alpha forest of the high-z quasar 0000-263

Medium-resolution (delta(v) = 45 km/s) optical spectra of the bright, high-redshift (z = 4.1) quasar 0000-263 taken at the ESO 3.5-m NTT telescope were analyzed to determine the distribution of column densities, velocities and line widths of the Lyman-alpha forest absorption components. The values of NH, b, and z were determined by fitting Voigt profiles to the lines, and convolving with a Gaussian instrumental response function. Over 350 components with log N(sub H) greater than 13.2 were identified. An analysis of the dependence of the number of components with z reveals that the number evolution of components obeys the power law dN/dz varies as (1+z)(sup gamma), where gamma = 0.5 +/- 0.4 for the sample of 182 lines with log N(sub H) greater than 14.0. The distribution of component strengths is found to obey f(N(sub H)) varies as N(sub h)(sup -beta), where beta = -1.55 for components with log(N(sub H)) is greater than 14.7, and beta = -0.68 for the components with log(N(sub H)) greater than 13.5. A distinct break in the f(N(sub H)) histogram is also observed, at log(N(sub H)) is approximately 14.7. The results are briefly considered in the context of theoretical models of quasar Lyman alpha clouds and their evolution.

Penprase, Bryan↗
NASA NTRSDate not supplied

Uniform Dust Deposition System for Dust Tolerance Studies

Future missions to the Moon will require mechanisms and materials to effectively and reliably operate in the presences of lunar regolith. One of the challenges of developing such technologies is terrestrial testing with lunar dust simulants. Dust has a stochastic nature of depositing and it can be difficult to accurately apply it to surfaces of interest. Deposition density, particles size distribution, and percent coverage are all factors that affect the quality of dust mitigation testing. Therefore, to enable such testing the dust mitigation and seals teams at NASA Glenn Research Center (GRC) have developed a system that can uniformly and repeatably deposit lunar simulants on a range of surfaces. Testing of the Dust Deposition System (DDS) and an associatedsimulant preparation methodology have quantified the levels of uniformity and precision for this system. Furthermore, the deposition system has been paired with automated micrograph capturing and machine learning image analysis to correlate the images of dust on a surface to deposition density (in g/cm2). This correlation alleviates the need for tested samples to be accurately weighed with milligram precision and may be a useful tool for in-situ contamination evaluation on the Moon. This paper covers the design and validation testing for the DDS.

Stephen Gerdts↗
NASA NTRSDate not supplied

Uniform Dust Deposition System for Dust Tolerance Studies

Future missions to the Moon will require mechanisms and materials to effectively and reliably operate in the presences of lunar regolith. One of the challenges of developing such technologies is terrestrial testing with lunar dust simulants. Dust has a stochastic nature of depositing and it can be difficult to accurately apply it to surfaces of interest. Deposition density, particles size distribution, and percent coverage are all factors that affect the quality of dust mitigation testing. Therefore, to enable such testing the dust mitigation and seals teams at NASA Glenn Research Center (GRC) have developed a system that can uniformly and repeatably deposit lunar simulants on a range of surfaces. Testing of the Dust Deposition System (DDS) and an associated simulant preparation methodology have quantified the levels of uniformity and precision for this system. Furthermore, the deposition system has been paired with automated micrograph capturing and machine learning image analysis to correlate the images of dust on a surface to deposition density (in g/cm2). This correlation alleviates the need for tested samples to be accurately weighed with milligram precision and may be a useful tool for in-situ contamination evaluation on the Moon. This paper covers the design and validation testing for the DDS.

Dust↗
NASA NTRS1979

The 18/30 GHz fixed communications system service demand assessment. Volume 2: Main text

The total demand for communications services, and satellite transmission services at the 4/6 GHz, 12/14 GHz, and 18/30 GHz frequencies is assessed. The services are voice, video, and data services. Traffic demand, by service, is distributed by geographical regions, population density, and distance between serving points. Further distribution of traffic is made among four major end user groups: business, government, institutions and private individuals. A traffic demand analysis is performed on a typical metropolitan city to examine service distribution trends. The projected cost of C and Ku band satellite systems are compared on an individual service basis to projected terrestrial rates. Separation of traffic between transmission systems, including 18/30 GHz systems, is based on cost, user, and technical considerations.

Gabriszeski, T.↗
NASA NTRS1980

Prediction of optical propagation losses through turbulent boundary/shear layers

A simplified mathematical model was developed which predicts the optical propagation losses which occur when an optical beam of given wave length passes through a turbulent boundary layer or shear layer. The optical losses are predicted in terms of line spread function (or Strehl ratio) and modulation transfer function by using experimentally determined values of layer thickness, streamwise, lateral and beamwise density fluctuation length scales, and distribution of the standard deviation of the density fluctuations through the turbulent layer. The prediction model was applied to the analysis of a number of selected cases of interest from the aerodynamic-optical interaction wind-tunnel investigation conducted in the NASA-Ames 1.83 x 1.83 meter (6 x 6 ft) wind tunnel. Direct optical measurements are compared with the results predicted by the aerodynamic analysis.

Verhoff, A.↗
NASA NTRS1988

Computational technique for compressible vortex flows using the integral equation solution

The steady full-potential equation is written in the form of Poisson's equation, and the solution for the velocity field is expressed in terms of an integral equation. The integral solution consists of two surface integrals and one volume integral. The solution is obtained through successive iteration cycles. Each cycle of iteration consists of two sub-cycles, an inner cycle for wake relaxation and an out cycle for the strength of the source distribution integrals representing the flow compressibility. The density gradients in the source distribution is computed by using a type-differencing scheme of the Murman-Cole type. The method is applied to delta wings and the numerical examples show that a curved shock is captured on the wing suction side beneath the leading edge vortex sheet. Recently, a modified version of the scheme was applied to rectangular wings. In this modified scheme, the surface integral terms were computed by using a bilinear distribution of vorticity on triangular vortex panels which represent the wing and its wake. The results were compared with the available experimental data and they are in good agreement.

Kandil, Osama A.↗