Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Correlation-assisted quantized charge pumping

Here, we investigate charge pumping in the vicinity of order-obstructed topological phases, i.e., symmetry-protected topological phases masked by spontaneous symmetry breaking in the presence of strong correlations. To explore this, we study a prototypical Su-Schrieffer-Heeger model with finite-range interaction that gives rise to orbital charge density wave order and characterize the impact of this order on the model's topological properties. In the ordered phase, where the many-body topological invariant loses quantization, we find that not only is quantized charge pumping still possible, but it is even assisted by the collective nature of the orbital charge density wave order. Remarkably, we show that the Thouless pump scenario may be used to uncover the underlying topology of order-obstructed phases.

1-dimensional systems↗
DOE OSTI2021

Revealing the competition between charge density wave and superconductivity in CsV 3 Sb 5 through uniaxial strain

In this paper we report the effect of uniaxial strain ε applied along the crystalline a axis on the newly discovered kagome superconductor CsV 3 Sb 5 . At ambient conditions, CsV 3 Sb 5 shows a charge-density wave (CDW) transition at T CDW = 94.5K and superconducts below T c = 3.34K. In our paper, when the uniaxial strain ε is varied from –0.90% to 0.90%,T c monotonically increases by ~33% from 3.0 to 4.0 K, giving rise to the empirical relation T c (ε) = 3.4 + 0.56ε + 0.12ε 2 . On the other hand, for ε changing from –0.76% to 1.26%,TCDW decreases monotonically by ~10% from 97.5 to 87.5 K with T CDW (ε) = 94.5 – 4.72ε – 0.60ε 2 . The opposite response of T c and T CDW to the uniaxial strain suggests strong competition between these two orders. Comparison with hydrostatic pressure measurements indicate that it is the change in the c axis that is responsible for these behaviors of the CDW and superconducting transitions, and that the explicit breaking of the sixfold rotational symmetry by strain has a negligible effect. Combined with our first-principles calculations and phenomenological analysis, we conclude that the enhancement in Tc with decreasing c is caused primarily by the suppression of T CDW , rather than strain-induced modifications in the bare superconducting parameters. We propose that the sensitivity of T CDW with respect to the changes in the c axis arises from the impact of the latter on the trilinear coupling between the $M$$^{+}_{1}$ and the $L$$^{–}_{2}$ phonon modes associated with the CDW. Altogether, our paper reveals that the c-axis lattice parameter, which can be controlled by both pressure and uniaxial strain, is a powerful tuning knob for the phase diagram of CsV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Pairing tendencies in the doped Kitaev-Heisenberg model

Here, we study the impact of hole doping on the Kitaev-Heisenberg model on the honeycomb lattice. We investigate the pairing tendencies and correlation functions in the framework of a t - J - K model using density matrix renormalization group calculations on three-leg cylinders. In the case of the pure Kitaev model, which realizes a quantum spin-liquid phase at half-filling, we find that binding of two holes only occurs at low values of the hopping, where the holes are slow. We have theoretically verified that pair formation occurs in the limit of immobile holes, where the pure Kitaev model remains exactly solvable. When we instead fix the hopping at an intermediate, more realistic, value, and vary the Heisenberg and Kitaev interaction strengths, we find pairing tendencies only in the Néel phase. This is in contrast to prior mean-field calculations, highlighting the importance of accounting for the kinetic energy of dopants in generalized Kitaev models. Interestingly, we also find signatures of pair-density wave formation over the studied range of model parameters, namely, a periodic modulation of the charge density as well as the spin-spin and pair-pair correlations in real space. Moreover, we present a comparative study of the different correlations as a function of doping. We finally discuss the potential for experimentally observing the studied physics in quantum materials and heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spatial correlations of entangled polymer dynamics

The spatial correlations of entangled polymer dynamics are examined by molecular dynamics simulations and neutron spin-echo spectroscopy. Due to the soft nature of topological constraints, the initial spatial decays of intermediate scattering functions of entangled chains are, to the first approximation, surprisingly similar to those of an unentangled system in the functional forms. However, entanglements reveal themselves as a long tail in the reciprocal-space correlations, implying a weak but persistent dynamic localization in real space. Furthermore, comparison with a number of existing theoretical models of entangled polymers suggests that they cannot fully describe the spatial correlations revealed by simulations and experiments. In particular, the strict one-dimensional diffusion idea of the original tube model is shown to be flawed. The dynamic spatial correlation analysis demonstrated in this work provides a useful tool for interrogating the dynamics of entangled polymers. Lastly, the failure of the investigated models to even qualitatively predict the spatial correlations of collective single-chain density fluctuations points to a possible critical role of incompressibility in polymer melt dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Bypassing the Energy Functional in Density Functional Theory: Direct Calculation of Electronic Energies from Conditional Probability Densities

Density functional calculations can fail for want of an accurate exchange-correlation approximation. The energy can instead be extracted from a sequence of density functional calculations of conditional probabilities (CP DFT). Simple CP approximations yield usefully accurate results for two-electron ions, the hydrogen dimer, and the uniform gas at all temperatures. CP DFT has no self-interaction error for one electron, and correctly dissociates H2, both major challenges. For warm dense matter, classical CP DFT calculations can overcome the convergence problems of Kohn-Sham DFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

High-throughput determination of Hubbard $U$ and Hund $J$ values for transition metal oxides via the linear response formalism

DFT+U provides a convenient, cost-effective correction for the self-interaction error (SIE) that arises when describing correlated electronic states using conventional approximate density functional theory (DFT). The success of a DFT+U(+J) calculation hinges on the accurate determination of its Hubbard U and Hund J parameters, and the linear response (LR) methodology has proven to be computationally effective and accurate for calculating these parameters. This study provides a high-throughput computational analysis of the U and J values for transition metal d-electron states in a representative set of over 1000 magnetic transition metal oxides (TMOs), providing a frame of reference for researchers who use DFT+U to study transition metal oxides. In order to perform this high-throughput study, an ATOMATE workflow is developed for calculating U and J values automatically on massively parallel supercomputing architectures. Here, to demonstrate an application of this workflow, the spin-canting magnetic structure and unit cell parameters of the multiferroic olivine LiNiPO4 are calculated using the computed Hubbard U and Hund J values for Ni-d and O-p states, and are compared with experiment. Both the Ni-d U and J corrections have a strong effect on the Ni-moment canting angle. Additionally, including a O-pU value results in a significantly improved agreement between the computed lattice parameters and experiment

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electronic Layer Decoupling Driven by Density-Wave Order in La 4⁢ Ni 3 ⁢O 10

We probe the density-wave transition of the trilayer nickelate La 4⁢ Ni 3 ⁢O 10 with polarization-resolved infrared spectroscopy. The low-energy electrodynamics is strongly anisotropic, with metallic in-plane and insulating out-of-plane character. In the ordered phase, the anisotropy grows more than an order of magnitude as the out-of-plane conductivity is sharply suppressed. We interpret this enhancement as an effective electronic decoupling of the Ni-O layers driven by a spin-density-wave-induced redistribution of Ni−𝑑 𝑧 2 occupation within the trilayers. This electronic response is accompanied by clearly shifting and splitting out-of-plane phonons, compatible with a density-wave instability of electronic origin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Direct evidence for eoarchean iron metabolism?

Metasedimentary rocks from Isua, West Greenland (> 3,700 million years old) contain carbonaceous compounds, compatible with a biogenic origin. The metamorphic mineral assemblage with garnet and quartz intergrowths contains layers of carbonaceous inclusions contiguous with carbon–rich sedimentary beds in the host rock. Previous studies on Isua rocks focused on testing the biogenic origin of the carbonaceous material, but here we searched for evidence which could provide new insights into the nature of the life that generated this carbonaceous material. We studied material trapped in inclusions armoured within quartz grains inside garnet porphyroblasts by non–destructive ptychographic X–ray nanotomography (PXCT). The 3D electron density maps generated by PXCT were correlated with maps from X–ray fluorescence tomography and micro–Raman spectroscopy. We found that the material trapped inside inclusions in the quartz grains consist of disordered carbon material encasing domains of iron–rich carbonaceous material. These results corroborate earlier claims for biogenic origins and are compatible with relics of metamorphosed biological material originally containing high iron/carbon ratios, comparable to ratios found in most extant organisms. Finally, these iron–rich domains represent the oldest evidence for organic iron complexes in the geologic record and are consistent with Fe–isotopic evidence for metabolic iron fractionation in > 3,700 Ma Isua banded iron formation.

58 GEOSCIENCES↗
DOE OSTI2022

Automated Control for Nuclear Thermal Propulsion Start-Up using MOOSE-based Applications

This report presents a Griffin/Bison/RELAP-7 numerical model of a prototypical NTP system that features fuel assemblies arranged in rings, and which was designed to simulate rapid startup transients. The physics modeled include full-core neutronics, assembly-wise heat conduction, and conjugate heat transfer, with the balance of plant mainly imposed through boundary conditions. In addition, various forms of automated reactivity control were deployed by using the MOOSE to autonomously drive the model and simulate the reactor transitioning from assumed initial conditions to nominal power in a fraction of a minute. To generate the cross-sections of the neutronics model, and in an effort to simultaneously account for the tremendous axial temperature gradients in the reactor and to limit the number of state points required for cross-section generation, the average component temperatures and hydrogen densities in the cooling channels were correlated to the average fuel and moderator temperatures, and fixed axial profiles were derived for nominal conditions and then used during the transient. With this approximation, a tractable cross-section library tabulated with fuel/moderator temperatures and CD angles was generated using Serpent. The full-core SPH correction procedure and the CD decusping technology in Griffin, respectively, ensure preservation of the multiplication factor and reaction rates at state points, along with a reasonably accurate reactivity worth between tabulated CD angles, despite using a coarse mesh. Feedback from other physics was calculated by modeling one representative fuel assembly per ring, along with the corresponding fuel and moderator cooling channels. To limit power overshoots during startup, another layer of multiphysics coupling was added to the model in order to automatically control the drums. Two different technologies presented herein showed outstanding performance in this regard: (1) a novel hybrid PID controller based on both power and reactivity signals, and (2) a PGC that relies on kinetics parameters and reactivity coefficients to predict future behavior and adjust the desired signal accordingly. A challenging benchmark was devised, featuring a power demand curve that exponentially increases by a factor of 500 within 30 seconds, then levels out after that. Both control approaches create a simulated power curve that closely follows the power demand curve and limits power overshoots to 1% or less. While the former approach requires more tuning of the internal parameters, the latter requires additional knowledge of the reactivity feedback coefficients and rates of change of the corresponding variables, including fuel and moderator temperature, which could be difficult to dynamically measure for a real NTP system. Fortunately, some inaccuracy in these quantities will not drastically degrade the PGC performance. Subsequently, a more realistic startup sequence was considered, in which the mass flow rate and outlet pressures are ramped up to model bootstrap and thrust build-up phases prior to reaching steady-state conditions, demonstrating the ability of the hybrid PID and PGCs to handle such transients, with both types of controllers exhibiting very similar behavior. Nevertheless, a significant chamber temperature overshoot was observed, caused by the demanded power signal and assumed mass flow rate. This issue could be mitigated by deploying a reactor controller that follows the chamber temperature signal and actuates both the control valves and drums (rather than using a power signal based solely on the drums to control reactivity). Enhancement of the hydrogen fluid properties available in MOOSE, as well as a better understanding of prototypical initial conditions, are also needed to further enhance this startup model. Finally, a study was performed to model decay heat post-shutdown, and to prepare for extending this model to predict shutdown behavior and post-shutdown pulsed cooling requirements.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Evaluation of δ-Phase ZrH1.4 to ZrH1.7 Thermal Neutron Scattering Laws Using Ab Initio Molecular Dynamics Simulations

Zirconium hydride is commonly used for next-generation reactor designs due to its excellent hydrogen retention capacity at temperatures below 1000 K. These types of reactors operate at thermal neutron energies and require accurate representation of thermal scattering laws (TSLs) to optimize moderator performance and evaluate the safety indicators for reactor design. In this work, we present an atomic-scale representation of sub-stoichiometric ZrH2−x(0.3≤x≤0.6), which relies on ab initio molecular dynamics (AIMD) in tandem with velocity auto-correlation (VAC) analysis to generate phonon density of states (DOS) for TSL development. The novel NJOY+NCrystal tool, developed by the European Spallation Source community, was utilized to generate the TSL formulations in the A Compact ENDF (ACE) format for its utility in neutron transport software. First, stoichiometric zirconium hydride cross sections were benchmarked with experiments. Then sub-stoichiometric zirconium hydride TSLs were developed. Significant deviations were observed between the new δ-phase ZrH2−x TSLs and the TSLs in the current ENDF release. It was also observed that varying the hydrogen vacancy defect concentration and sites did not cause as significant a change in the TSLs (e.g., ZrH1.4 vs. ZrH1.7) as was caused by the lattice transformation from ϵ- to δ-phase.

42 ENGINEERING↗
DOE OSTI2022

Diagnostic development for parallel wave-number measurement of lower hybrid waves in EAST

An eight-channel magnetic probe diagnostic system has been designed and installed adjacent to the 4.6 GHz lower hybrid (LH) grill antenna in the low-field side of the EAST tokamak in order to study the n|| evolution of lower hybrid waves in the first pass from the launcher to the core plasma. The magnetic probes are separated by 6.6 mm, which allows measurement of the dominant parallel refractive index n|| up to n|| =5 for 4.6GHz LH waves. The magnetic probes are designed to be sensitive to the magnetic field component perpendicular to the background magnetic field with a slit on the casing that encloses the probe. The intermediate frequency (IF) stage, which consists of two mixing stages, down-coverts the frequency of the measured wave signals at 4.6 GHz to 20 MHz. A bench test demonstrates the phase stability of the magnetic probe diagnostic system. By evaluating the phase variation of the measured signals along the background magnetic field, the dominant n|| of the LH wave in the scrape-off layer (SOL) has been deduced during the 2019 experimental campaign. In the low density plasma, the measured dominant n|| of the lower hybrid waves is about 2.1, corresponding to the main peak 2.04 of the launched n|| spectrum. The n|| deduced by the least square linear fit method remains near this value in the low density plasma with a high spatial correlation magnitude of 0.9. With an eight-channel probe system a wave-number spectrum has also been deduced, which has a peak near to the measured dominant n||.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1968

Nonlinear interactions of electromagnetic waves with a thermally generated cesium plasma.

The interaction of a large‐amplitude disturbing wave with a thermally generated, highly ionized cesium plasma has been investigated using a small‐amplitude sensing wave as a probe. The subsequent interaction between the disturbing and sensing waves is related to the plasma electron temperature. The plasma was contained in a magnetic field of 500–1000 G and had an electron plasma frequency near 10 GHz and an electron gyromagnetic frequency around 2 GHz. The sensing wave was a 10 GHz plane wave of approximately 1.5 mW input power and the disturbing wave was 7.5 GHz plane wave of about 1.2 W peak power. Measurements of the sensing‐wave transmitted power were made using standard microwave techniques. A notch filter in the sensing‐wave receiving circuit reduced the scattered disturbing‐wave interference to an immeasurably low level. Langmuir probes were used to detect disturbing‐wave modulation and to measure plasma temperatures and densities. Measurements of the interaction were correlated with a solution of the Boltzmann transport equation for a perturbed Maxwellian distribution function with binary Coulomb collisions.

Jack G Hewitt, Jr↗
NASA NTRS1969

Diffusion of rays in random media.

Fokker-Planck equation applied to probability density for finding rays larger than correlation distance during propagation in random medium

Liu, C. H.↗
NASA NTRS1970

Optimum adaptive reception for binary sequences

Optimum adaptive reception for binary sequences, using posteriori probability density function computing device synthesized from correlator, instantaneous nonlinearity and multiplier

Wintz, P. A.↗
NASA NTRS1973

Noise characteristics of combustion augmented high speed jets.

Noise generation by a subsonic flow discharging from a combustion chamber is examined with regard to the relative importance of combustion as a source of noise in such a flow system. Measurements of pressure fluctuations inside the combustor are compared with far-field noise measurements by direct cross-correlations. The cross-correlations and derived cross-spectral densities verify that much of the noise originates inside the combustor. A first-order fluid-mechanical perturbation model is used to predict exit plane velocity fluctuations due to internal pressure fluctuations. Far-field noise levels estimated on this basis are in good agreement with measured values. The overall noise level from the combustor/jet is found to be 10 to 20 dB higher than for an equivalent clean, cold jet at the same exit velocity.

Abdelhamid, A. N.↗
NASA NTRS1977

Particle track densities in double drive tube 60009/10

Measurements are reported of particle track densities in grains from a suite of eleven samples from the Apollo 16 double drive tube 60009/10. All of the samples studied in 60009 show a clearly bimodal distribution of track densities in plagioclase. This bimodal distribution is interpreted to indicate a mixing of a relatively immature soil with a relatively mature soil. This mixing was not followed by any appreciable reworking which would have altered the distribution. The three lower samples in 60010 also show a bimodal distribution. However, the three uppermost samples show a unimodal distribution. The percentage of high track density plagioclase grains shows a good correlation with the other maturity indices of agglutinate content and the ferromagnetic resonance intensity.

Blanford, G. E.↗
NASA NTRS1979

Solar variability and ozone

Stratospheric temperature and concentration of ozone above 26 km, as measured by rocket-borne instruments, showed an increase from 1964 to 1969-70, and a decline between 1970 and 1975, closely following the solar cycle, which peaked in 1969 (+0.89 correlation at both 35 and 50 km). Similar correlations were found between the ozone density and the 10.7 cm solar radio flux (as measured by the Nimbus IV satellite), and between ozone column density and the Lyman-alpha flux, both observations being taken over the same 10 month period. A mechanism is hypothesized which would link solar flux variation with both changes in stratospheric temperature and concentration of ozone (which is produced by the photodissociation of stratospheric oxygen molecules by solar radiation in the ultraviolet wavelength region).

Callis, L. B.↗