Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Cytoskeletal mechanics in pressure-overload cardiac hypertrophy

We have shown that the cellular contractile dysfunction characteristic of pressure-overload cardiac hypertrophy results not from an abnormality intrinsic to the myofilament portion of the cardiocyte cytoskeleton but rather from an increased density of the microtubule component of the extramyofilament portion of the cardiocyte cytoskeleton. To determine how, in physical terms, this increased microtubule density mechanically overloads the contractile apparatus at the cellular level, we measured cytoskeletal stiffness and apparent viscosity in isolated cardiocytes via magnetic twisting cytometry, a technique by which magnetically induced force is applied directly to the cytoskeleton through integrin-coupled ferromagnetic beads coated with Arg-Gly-Asp (RGD) peptide. Measurements were made in two groups of cardiocytes from cats with right ventricular (RV) hypertrophy induced by pulmonary artery banding: (1) those from the pressure-overloaded RV and (2) those from the normally loaded same-animal control left ventricle (LV). Cytoskeletal stiffness increased almost twofold, from 8.53 +/- 0.77 dyne/cm2 in the normally loaded LV cardiocytes to 16.46 +/- 1.32 dyne/cm2 in the hypertrophied RV cardiocytes. Cytoskeletal apparent viscosity increased almost fourfold, from 20.97 +/- 1.92 poise in the normally loaded LV cardiocytes to 87.85 +/- 6.95 poise in the hypertrophied RV cardiocytes. In addition to these baseline data showing differing stiffness and, especially, apparent viscosity in the two groups of cardiocytes, microtubule depolymerization by colchicine was found to return both the stiffness and the apparent viscosity of the pressure overload-hypertrophied RV cells fully to normal. Conversely, microtubule hyperpolymerization by taxol increased the stiffness and apparent viscosity values of normally loaded LV cardiocytes to the abnormal values given above for pressure-hypertrophied RV cardiocytes. Thus, increased microtubule density constitutes primarily a viscous load on the cardiocyte contractile apparatus in pressure-overload cardiac hypertrophy.

Non-NASA Center↗
NASA NTRS2005

Sulfur Oxidation and Contrail Precursor Chemistry

Sulfuric acid (H2SO4), formed in commercial aircraft operations via Fuel-S (right arrow) SO2 + SO3 (right arrow) H2SO4, plays an important role in affecting the global climate change through atmospheric chemical reactions and radiative forcing. Measurement of the sulfur oxidation rates is critical to the understanding of the contrail formation. The principle reaction pathway is SO2 + O + M (right arrow) SO3 + M. Although there are many measurements for the rates of this reaction, it has never been measured in the temperature and pressure regime available to aircraft operation. In this investigation, a series of experiments were performed behind the reflected shock waves in a shock tube. OH radicals were produced in lean, shock heated SO2/H2/O2/Ar mixtures. The reaction progress was followed using OH absorption spectroscopy at 310 nm. The data were analyzed with the aid of computer modeling/simulation. The mean value of the rate coefficients of R21 determined is k(sub 21,0)/[M]= 3.9 x 10(exp 15) cm(sup 6) per square mole per second at T = 960 - 1150 K and rho = 16-30 micromole per cubic centimeter with uncertainty limits of plus or minus 30%. A non-Arrhenius fit to our data together with all existing data gives k(sub 21,0)/[M] = 1.3 x 10(exp 24) T (exp -2.5) exp(-2350 K/T) cm(sup 6) per square mole per second at T = 300 - 2500 K with the same uncertainty limits given above. The calculated conversion of S(IV)(SO2) to S(VI) (SO3 + H2SO4) was about 2% in our experimental conditions.

DeWitt, Kenneth↗
NASA NTRS2019

Deep Learning Method for Detecting Precursors to Adverse Events

With the recent advancements in Deep Learning methods, the ability to model large complex heterogeneous data sets are fundamentally changing industry and research. Coupled with hardware improvements, and ease of implementation, a wide variety of deep neural network architectures can quickly be developed to solve a sweeping range of problems such as: object detection in images, automatic healthcare diagnosis using heterogenous data sources, real time language translating and sentence prediction, upscaling low resolution images, and forecasting of multivariate timeseries. Generally, many of these architectures outperform classical machine learning approaches in their respective tasks, however, this typically comes at a cost of interpretability. These black box algorithms generally suffer from lack of transparency in both model complexity as well as the rationale behind the prediction. This lack of comprehension, is driving an emerging area of interest in “Explainable AI”. An algorithm called: “Deep Temporal Multiple Instance Learning”1 was a recently developed to identify precursors to adverse events and has been applied in the aviation domain. The deep learning architecture is designed to capture the evolution of the probability of the outcome over the time preceding the adverse event using a multiple instance learning approach as illustrated in Figure 1. Precursors are defined when the probability of the event has exceeded a threshold at some point in the timeseries, at which point, a sensitivity analysis is performed to determine contributing factors. The contributing factors are used to explain and define the precursor during the periods where the probability score is high. The identified contributing factors are then presented to subject matter experts to provide objective insights into the leading factors associated with the particular adverse event. The algorithm has been tested on flight data from a commercial airline and has the ability to discover precursors to known adverse events that take the form of safety critical operations, such as unstable approach events on final approach. Apart from detecting precursors to adverse events, the converse can also be leveraged to discover corrective actions. These positive actions manifest themselves as periods in the timeseries when the precursor score has been lowered from an elevated state; meaning that if the system had been left uncorrected, it would have eventually reached the adverse event state. Characterizing these state changes can help identify successful interventions that may not have been known before. Policy makers and procedure designers can use this additional knowledge to craft more safety and efficient resilient procedures for future operations and therefore improve the overall performance of the National Airspace.

Matthews, Bryan L.↗
NASA NTRS1998

Application of the Shuttle Laser Altimeter in an Accuracy Assessment of Global 1-Kilometer Digital Elevation Data

Shuttle Laser Altimeter (SLA) data have been used to evaluate the accuracy of GTOPO30, the first comprehensive, 1 km resolution, global topographic data set. GTOPO30 was developed by the USGS Eros Data Center (EDC), in part, to address NASA's needs for a global topographic model in support of remote sensing instruments aboard the Earth Observing System AM-1 spacecraft. SLA flew as a part of the STS-72 mission in January, 1996 observing the latitude band from +/- 28.5 deg, and on STS-85 in August, 1997 extending the observations to +/- 57 deg. Combining the SLA ranging data with shuttle position and pointing knowledge yields surface elevation data of very high vertical accuracy in an Earth-centered, absolute reference frame (2.8 m rms difference for SLA-01 with respect to ocean reference surface). Use of the well-determined mean sea surface reference for calibration allows propagation of high accuracy altimetry onto the continents. 436,635 SLA-01 land elevations were compared to the GTOPO30 grid after conversion to a mean sea level vertical datum using the Earth Geoid Model 96, jointly developed by Goddard and NIMA. The comparison reveals systematic elevation biases in southern Asia, Africa, Australia, and south America on the order 10's to 100 meters in the GTOPO30 compilation on spatial scales of 100's to 1000's of kilometers. These biases are likely due to vertical datum errors in the topographic source materials used to compile GTOPO30, which primarily consist of Defense Mapping Agency (DMA) digital elevation and topographic map products. These biases imply that elevation corrections applied to land gravity measurements using these DMA source materials will be biased, leading to errors in geoid models incorporating these land gravity data.

Harding, David J.↗
NASA NTRS1971

On the inversion of limb radiance measurements. I.

The calculation of limb radiance as a function of tangent height is shown to require information about the vertical distribution of temperature and the pressure at one level. Conversely, given the limb radiance curve and the pressure corresponding to one tangent point, it is possible to determine the temperature profile as a function of height relative to the given level, using an iterative technique. Results of inverting synthesized realistic data are presented. The data include the effects of water vapor and ozone contamination of the carbon dioxide signal, instrument field of view, and random and systematic noise for real atmospheres having small-scale vertical structure.

Gille, J. C.↗
NASA NTRS1977

Comparison of linear inversion methods by examination of the duality between iterative and inverse matrix methods

Linear numerical inversion methods applied to atmospheric remote sounding generally can be categorized in two ways: (1) iterative, and (2) inverse matrix methods. However, these two categories are not unrelated; a duality exists between them. In other words, given an iterative scheme, a corresponding inverse matrix method exists, and conversely. This duality concept is developed for the more familiar linear methods. The iterative duals are compared with the classical linear iterative approaches and their differences analyzed. The importance of the initial profile in all methods is stressed. Calculations using simulated data are made to compare accuracies and to examine the dependence of the solution on the initial profile.

Fleming, H. E.↗
NASA NTRS1980

The United Stirling P40 engine for solar dish concentrator application

The United Stirling P40 engine is a key component in a solar concentration based energy conversion system, to be demonstrated and tested during 1980-81. The inherent characteristics of modern Stirling engines is reviewed focusing on the baseline P40 double-acting engine. The extent of modifications required for the solar application is reviewed and performance data are predicted. Finally, the potential of an advanced solar Stirling engine is briefly considered.

Ortegren, L.↗
NASA NTRS1981

Remote sensing of temperature profiles in vegetation canopies using multiple view angles and inversion techniques

A mathematical method is presented which allows the determination of vertical temperature profiles of vegetation canopies from multiple sensor view angles and some knowledge of the vegetation geometric structure. The technique was evaluated with data from several wheat canopies at different stages of development, and shown to be most useful in the separation of vegetation and substrate temperatures with greater accuracy in the case of intermediate and dense vegetation canopies than in sparse ones. The converse is true for substrate temperatures. Root-mean-square prediction accuracies of temperatures for intermediate-density wheat canopies were 1.8 C and 1.4 C for an exact and an overdeterminate system, respectively. The findings have implication for remote sensing research in agriculture, geology or other earth resources disciplines.

Kimes, D. S.↗
NASA NTRS1993

Transforming AdaPT to Ada9x

How the concepts of AdaPT can be transformed into programs using the object oriented features proposed in the preliminary mapping for Ada9x are described. Emphasizing, as they do, the importance of data types as units of program, these features match well with the development of partitions as translations into Abstract Data Types which was exploited in the Ada83 translation covered in report R3. By providing a form of polymorphic type, the Ada83 version also gives support for the conformant partition idea which could be achieved in Ada83 only by using UNCHECKED CONVERSIONS. It is assumed that the reader understands AdaPT itself, but the translation into Ada83 is briefly reviewed, by applying it to a small example. This is then used to show how the same translation would be achieved in the 9x version. It is important to appreciate that the distribution features which are proposed in current mapping are not used or discussed in any detail, as those are not well matched to the AdaPT approach. Critical evaluation and comparison of these approaches is given in a separate report.

Goldsack, Stephen J.↗
NASA NTRS1992

Evaluation of all-electric secondary power for transport aircraft

This report covers a study by Douglas Aircraft Company (DAC) of electrical power systems for advanced transport aircraft based upon an all-electric design concept. The concept would eliminate distributed hydraulic and pneumatic secondary power systems, and feature an expanded secondary electrical power system redesigned to supply power to the loads customarily supplied by hydraulic or pneumatic power. The initial study was based on an advanced 20-kHz electrical power transmission and distribution system, using a system architecture supplied by NASA-Lewis Research Center for twin-engine aircraft with many advanced power conversion concepts. NASA-LeRC later requested DAC to refocus the study on 400-Hz secondary power distribution. Subsequent work was based on a three-engine MD-11 aircraft, selected by DAC as a baseline system design that would provide data for the comparative cost/benefit analysis. The study concluded that the 20-kHz concept produced many expected benefits, and that the all-electric trijet weight savings on hardware redesign would be 2,304 pounds plus a 2.1-percent fuel reduction and resized for a total weight reduction of 11,000 pounds. Cost reductions for a fleet of 800 aircraft in a 15-year production program were estimated at $76.71 million for RDT&E; $2.74 million per aircrat for production; $9.84 million for nonrecurring expenses; $120,000 per aircraft for product support; and $300,000 per aircraft per year for operating and maintenance costs, giving a present value of $1.914 billion saved or a future value of $10.496 billion saved.

Murray, W. E.↗
NASA NTRS2017

Historic Global Biomass Burning Emissions for CMIP6 (BB4CMIP) Based on Merging Satellite Observations with Proxies and Fire Models (1750-2015)

Fires have influenced atmospheric composition and climate since the rise of vascular plants, and satellite data has shown the overall global extent of fires. Our knowledge of historic fire emissions has progressively improved over the past decades due mostly to the development of new proxies and the improvement of fire models. Currently there is a suite of proxies including sedimentary charcoal records, measurements of fire-emitted trace gases and black carbon stored in ice and firn, and visibility observations. These proxies provide opportunities to extrapolate emissions estimates based on satellite data starting in 1997, but each proxy has strengths and weaknesses regarding, for example, the spatial and temporal extents over which they are representative. We developed a new historic biomass burning emissions dataset starting in 1750 that merges the satellite record with several existing proxies, and uses the average of six models from the Fire Model Intercomparison Project (FireMIP) protocol to estimate emissions when the available proxies had limited coverage. According to our approach, global biomass burning emissions were relatively constant with 10-year averages varying between 1.8 and 2.3 petagrams of carbon per year. Carbon emissions increased only slightly over the full time period and peaked during the 1990's after which they decreased gradually. There is substantial uncertainty in these estimates and patterns varied depending on choices regarding data representation, especially on regional scales. The observed pattern in fire carbon emissions is for a large part driven by African fires, which accounted for 58 percent of global fire carbon emissions. African fire emissions declined since about 1950 due to conversion of savanna to cropland, and this decrease is partially compensated for by increasing emissions in deforestation zones of South America and Asia. These global fire emissions estimates are mostly suited for global analyses and will be used in the Coupled Model Intercomparison Project Phase 6 (CMIP6) simulations.

Biomass burning; Satellite observations; computer ↗
NASA NTRS2019

Scale Analysis of Moist Thermodynamics in a Simple Model and the Relationship Between Moisture Modes and Gravity Waves

Observations and theory of convectively-coupled equatorial waves suggest that they can be categorized into two distinct groups. Moisture modes are waves whose thermodynamics are governed by moisture fluctuations. The thermodynamics of the gravity wave group, on the other hand, are rooted in buoyancy (temperature) fluctuations. On the basis of scale analysis it is found that a simple nondimensional parameter –akin to the Rossby number– can explain the processes that lead to the existence of these two groups. This parameter, defined as Nmode, indicates that moisture modes arise when anomalous convection lasts sufficiently long so that dry gravity waves eliminate the temperature anomalies in the convective region, satisfying weak temperature gradient (WTG) balance. This process causes moisture anomalies to dominate the distribution of moist enthalpy (or moist static energy), and hence the evolution of the wave. Conversely, convectively-coupled gravity waves arise when anomalous convection eliminates the moisture anomalies more rapidly than dry gravity waves can adjust the troposphere towards WTG balance, causing temperature to govern the moist enthalpy distribution and evolution. Spectral analysis of reanalysis data indicates that slowly-propagating waves (cp ~ 3 m s-1) are likely to be moisture modes while fast waves (cp ~ 30 m s-1) exhibit gravity wave behavior, with "mixed moisture-gravity" waves existing in between. While these findings are obtained from a highly idealized framework, it is hypothesized that they can be extended to understand simulations of convectively-coupled waves in GCMs and the thermodynamics of more complex phenomena.

Angel F Adames↗
NASA NTRS2002

Digital Distortion Caused by Traveling- Wave-Tube Amplifiers Simulated

Future NASA missions demand increased data rates in satellite communications for near real-time transmission of large volumes of remote data. Increased data rates necessitate higher order digital modulation schemes and larger system bandwidth, which place stricter requirements on the allowable distortion caused by the high-power amplifier, or the traveling-wave-tube amplifier (TWTA). In particular, intersymbol interference caused by the TWTA becomes a major consideration for accurate data detection at the receiver. Experimentally investigating the effects of the physical TWTA on intersymbol interference would be prohibitively expensive, as it would require manufacturing numerous amplifiers in addition to acquiring the required digital hardware. Thus, an accurate computational model is essential to predict the effects of the TWTA on system-level performance when a communication system is being designed with adequate digital integrity for high data rates. A fully three-dimensional, time-dependent, TWT interaction model has been developed using the electromagnetic particle-in-cell code MAFIA (Solution of Maxwell's equations by the Finite-Integration-Algorithm). It comprehensively takes into account the effects of frequency-dependent AM (amplitude modulation)/AM and AM/PM (phase modulation) conversion, gain and phase ripple due to reflections, drive-induced oscillations, harmonic generation, intermodulation products, and backward waves. This physics-based TWT model can be used to give a direct description of the effects of the nonlinear TWT on the operational signal as a function of the physical device. Users can define arbitrary excitation functions so that higher order modulated digital signals can be used as input and that computations can directly correlate intersymbol interference with TWT parameters. Standard practice involves using communication-system-level software packages, such as SPW, to predict if adequate signal detection will be achieved. These models use a nonlinear, black-box model to represent the TWTA. The models vary in complexity, but most make several assumptions regarding the operation of the high-power amplifier. When the MAFIA TWT interaction model was used, these assumptions were found to be in significant error. In addition, digital signal performance, including intersymbol interference, was compared using direct data input into the MAFIA model and using the system-level analysis tool SPW for several higher order modulation schemes. Results show significant differences in predicted degradation between SPW and MAFIA simulations, demonstrating the significance of the TWTA approximations made in the SPW model on digital signal performance. For example, a comparison of the SPW and MAFIA output constellation diagrams for a 16-ary quadrature amplitude modulation (16-QAM) signal (data shown only for second and fourth quadrants) is shown. The upper-bound degradation was calculated from the corresponding eye diagrams. In comparison to SPW simulations, the MAFIA data resulted in a 3.6-dB larger degradation.

Kory, Carol L.↗
NASA NTRS1999

Optical Analysis of Transparent Polymeric Material Exposed to Simulated Space Environment

Transparent polymeric materials are being designed and utilized as solar concentrating lenses for spacecraft power and propulsion systems. These polymeric lenses concentrate solar energy onto energy conversion devices such as solar cells and thermal energy systems. The conversion efficiency is directly related to the transmissivity of the polymeric lens. The Environmental Effects Group of the Marshall Space Flight Center's Materials, Processes, and Manufacturing Department exposed a variety of materials to a simulated space environment and evaluated them for an, change in optical transmission. These materials include Lexan(TM), polyethylene terephthalate (PET). several formulations of Tefzel(TM). and Teflon(TM), and silicone DC 93-500. Samples were exposed to a minimum of 1000 Equivalent Sun Hours (ESH) of near-UV radiation (250 - 400 nm wavelength). Data will be presented on materials exposed to charged particle radiation equivalent to a five-year dose in geosynchronous orbit. These exposures were performed in MSFC's Combined Environmental Effects Test Chamber, a unique facility with the capability to expose materials simultaneously or sequentially to protons, low-energy electrons, high-energy electrons, near UV radiation and vacuum UV radiation.Prolonged exposure to the space environment will decrease the polymer film's transmission and thus reduce the conversion efficiency. A method was developed to normalize the transmission loss and thus rank the materials according to their tolerance to space environmental exposure. Spectral results and the material ranking according to transmission loss are presented.

Edwards, David L.↗
NASA NTRS1974

Advanced thermionic energy conversion

Basic analytical and experimental exploration was conducted on several types of advanced thermionic energy converters, and preliminary analysis was performed on systems utilizing advanced converter performance. The Pt--Nb cylindrical diode which exhibited a suppressed arc drop, as described in the preceding report, was reassembled and the existence of the postulated hydrid mode of operation was tentatively confirmed. Initial data obtained on ignited and unignited triode operation in the demountable cesium vapor system essentially confirmed the design principles developed in earlier work, with a few exceptions. Three specific advanced converter concepts were selected as candidates for concentrated basic study and for practical evaluation in fixed-configuration converters. Test vehicles and test stands for these converters and a unique controlled-atmosphere station for converter assembly and processing were designed, and procurement was initiated.

Britt, E. J.↗
NASA NTRS1979

A computer algorithm for performing interactive algebraic computation on the GE Image-100 system

A subroutine which performs specialized algebraic computations upon ocean color scanner multispectral data is presented. The computed results are displayed on a video display. The subroutine exists as a component of the aircraft sensor analysis package. The user specifies the parameters of the computations by directly interacting with the computer. A description of the conversational options is also given.

Hart, W. D.↗
NASA NTRS1982

Analysis and Monte Carlo simulation of near-terminal aircraft flight paths

The flight paths of arriving and departing aircraft at an airport are stochastically represented. Radar data of the aircraft movements are used to decompose the flight paths into linear and curvilinear segments. Variables which describe the segments are derived, and the best fitting probability distributions of the variables, based on a sample of flight paths, are found. Conversely, given information on the probability distribution of the variables, generation of a random sample of flight paths in a Monte Carlo simulation is discussed. Actual flight paths at Dulles International Airport are analyzed and simulated.

Schiess, J. R.↗
NASA NTRS1981

MAGSAT project

Programs for the conversion of MAGSAT tapes (both CHRONICLE and CHRONINT formats) from IBM binary to DEC 10 binary were developed in ASSEMBLY language) and programs for selection of only a particular part of CHRONICLE tape (e.g., passes over the Indian subcontinent) were also prepared. Data on a few selected quiet and disturbed days were studied by substracting the main field, and the anomalies over the Indian region were partly identified on few of the passes. A national Workshop on MAGSAT was arranged. The potentialities and usefulness of MAGSAT data particularly in the study of crustal lithology was discussed.

Source record↗