Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystalline materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Targeting One- and Two-Dimensional Ta–Te Structures via Nanotube Encapsulation

Fine control over material synthesis on the nanoscale can facilitate the stabilization of competing crystalline structures. In this report we demonstrate how carbon nanotube reaction vessels can be used to selectively create one-dimensional TaTe 3 chains or two-dimensional TaTe 2 nanoribbons with exquisite control of the chain number or nanoribbon thickness and width. Transmission electron microscopy and scanning transmission electron microscopy reveal the detailed atomic structure of the encapsulated materials. Complex superstructures such as multichain spiraling and apparent multilayer moirés are observed. The rare 2H phase of TaTe 2 (1H in monolayer) is found to be abundant as an encapsulated nanoribbon inside carbon nanotubes. The experimental results are complemented by density functional theory calculations for the atomic and electronic structure, which uncovers the prevalence of 2H-TaTe 2 due to nanotube-to-nanoribbon charge transfer and size confinement. Calculations also reveal new 1T' type charge density wave phases in TaTe 2 that could be observed in experimental studies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enabling Efficiencies > 22.5% with Metal Oxide Passivating Contacts using Low-Cost Spatial Atomic Layer Deposition (Final Technical Report)

In this project, the University of Central Florida (UCF) worked to both increase module efficiency and reduce manufacturing cost by driving demonstrated lab-scale passivating contact technology using materials and processes compatible with high-volume manufacturing for crystalline silicon (c-Si) photovoltaic (PV) cells. Passivating contacts have garnered significant attention in recent years. They provide a means of suppressing contact recombination, a loss mechanism that limits the performance of industrially relevant cell architectures like Al back surface field (Al-BSF) cells and passivated emitter and rear cells (PERC). Most of the development of passivating contact technology has focused on the use of doped amorphous silicon or doped polysilicon contacts, but both suffer from parasitic optical absorption amongst other issues. Our team developed fully transparent hole-selective heterojunctions, deposited using atomic layer deposition (ALD), and showed how they could be incorporated into c-Si PV cells. The team conducted experiments to understand the process-structure-property relationship of hole-selective oxides, surface passivation oxide materials, and transparent conductive oxides deposited by ALD, and use that understanding to reduce contact recombination, contact resistivity, and parasitic optical absorption within c-Si PV cells. Before getting into the details of the report, we would like to note that COVID-19 has made it more challenging to conduct experimental research at UCF. UCF has a number of mandatory policies in place to ensure social distancing, testing, and contact tracing are all carried out in day-to-day operations. Despite these challenges, we worked diligently to make progress on this project in a manner that was as safe as possible. Over the course of the project, the UCF team and its collaborators have made the following discoveries and developments.

14 SOLAR ENERGY↗
NASA NTRS2013

Data from the Mars Science Laboratory CheMin XRD/XRF Instrument

The CheMin instrument on the Mars Science Laboratory (MSL) rover Curiosity uses a Co tube source and a CCD detector to acquire mineralogy from diffracted primary X-rays and chemical information from fluoresced X-rays. CheMin has been operating at the MSL Gale Crater field site since August 5, 2012 and has provided the first X-ray diffraction (XRD) analyses in situ on a body beyond Earth. Data from the first sample collected, the Rocknest eolian soil, identify a basaltic mineral suite, predominantly plagioclase (approx.An50), forsteritic olivine (approx.Fo58), augite and pigeonite, consistent with expectation that detrital grains on Mars would reflect widespread basaltic sources. Minor phases (each <2 wt% of the crystalline component) include sanidine, magnetite, quartz, anhydrite, hematite and ilmenite. Significantly, about a third of the sample is amorphous or poorly ordered in XRD. This amorphous component is attested to by a broad rise in background centered at approx.27deg 2(theta) (Co K(alpha)) and may include volcanic glass, impact glass, and poorly crystalline phases including iron oxyhydroxides; a rise at lower 2(theta) may indicate allophane or hisingerite. Constraints from phase chemistry of the crystalline components, compared with a Rocknest bulk composition from the APXS instrument on Curiosity, indicate that in sum the amorphous or poorly crystalline components are relatively Si, Al, Mg-poor and enriched in Ti, Cr, Fe, K, P, S, and Cl. All of the identified crystalline phases are volatile-free; H2O, SO2 and CO2 volatile releases from a split of this sample analyzed by the SAM instrument on Curiosity are associated with the amorphous or poorly ordered materials. The Rocknest eolian soil may be a mixture of local detritus, mostly crystalline, with a regional or global set of dominantly amorphous or poorly ordered components. The Rocknest sample was targeted by MSL for "first time analysis" to demonstrate that a loose deposit could be scooped, sieved to <150 microns, and delivered to instruments in the body of the rover. A drilled sample of sediment in outcrop is anticipated. At the time of writing this abstract, promising outcrops are in range and this talk will provide an update on data collected with the CheMin instrument.

Vaniman, David↗
NASA NTRS2004

Microcrystals and Amorphous Material in Comets and Primitive Meteorites: Keys to Understanding Processes in the Early Solar System

Comets, fine-grained matrices of chondrites, and chondritic interplanetary dust particles (IDPs) are each composed of both crystalline and amorphous silicates. The primitive solar nebula, in which comets and asteroids accreted, was formed from the collapsed core of a Giant Molecular Cloud, that, in turn, condensed from materials present in the interstellar medium (ISM). Despite observations that reveal the presence of crystalline magnesium silicate minerals in the shells of very high mass-loss-rate stars [1,2], typical silicate grains in the ISM are most likely to be amorphous, given their relatively long residence time in such a high radiation environment. An upper limit of ~3% crystalline grains can be derived from their non-detection in spectra of ISM solids [3]. If the vast majority of grains that enter the primitive solar nebula are amorphous, then the observation of crystalline dust in comets and primitive chondrite matrices indicates the action of specific processes required to transform the amorphous starting materials into the crystals that are observed.

Nuth, J. A.↗
DOE OSTI2022

Graphene Nanopattern for Single-Crystal Film Growth, Defect Reduction and Layer Transfer

Thin film heterostructures are key building blocks for advanced electronic and optoelectronic devices. For this, direct heteroepitaxy has been pursued for decades, although it has been challenging to reduce crystal defects stemming from lattice mismatches and thermal mismatches between materials. The layer transfer method has been proposed as an alternative approach, wherein dissimilar materials are separately grown and then hetero-integrated. However, the applicability of layer transfer techniques is limited by several technical challenges, such as controllability, throughput, and damage to the substrate. Remote epitaxy, which is a recently developed method to produce single-crystalline membranes, is a promising approach but cannot be applied to elemental materials such as Si and Ge. In this work, we report graphene nanopattern as a universal template for the growth of single-crystal thin films that can be exfoliated as a freestanding form. This is realized by the chemical inertness of graphene, which allows selective nucleation at the exposed region, followed by lateral overgrowth onto graphene to form a planarized thin film. By employing graphene nanopattern, both group IV and III-V materials are utilized as the substrate as well as the epilayer. The epilayer can be exfoliated at the graphene interface because partially covered graphene effectively weakens the interface, which is corroborated by theoretical analyses of spalling theory. We reveal that graphene nanopattern not only works as a weakened interface for exfoliation, but also allows for dislocation reduction in heteroepitaxial films. This is because of the flexibility and the dangling-bond-free nature of graphene, which provides an additional path for strain relaxation. Therefore, these results represent a meaningful step toward production of high-quality single-crystal membranes that can be hetero-integrated.

Kim, Hyunseok↗
DOE OSTI2022

Graphene Nanopattern for Single-Crystal Film Growth, Defect Reduction and Layer Transfer

Thin film heterostructures are key building blocks for advanced electronic and optoelectronic devices. For this, direct heteroepitaxy has been pursued for decades, although it has been challenging to reduce crystal defects stemming from lattice mismatches and thermal mismatches between materials. The layer transfer method has been proposed as an alternative approach, wherein dissimilar materials are separately grown and then hetero-integrated. However, the applicability of layer transfer techniques is limited by several technical challenges, such as controllability, throughput, and damage to the substrate. Remote epitaxy, which is a recently developed method to produce single-crystalline membranes, is a promising approach but cannot be applied to elemental materials such as Si and Ge. In this work, we report graphene nanopattern as a universal template for the growth of single-crystal thin films that can be exfoliated as a freestanding form. This is realized by the chemical inertness of graphene, which allows selective nucleation at the exposed region, followed by lateral overgrowth onto graphene to form a planarized thin film. By employing graphene nanopattern, both group IV and III-V materials are utilized as the substrate as well as the epilayer. The epilayer can be exfoliated at the graphene interface because partially covered graphene effectively weakens the interface, which is corroborated by theoretical analyses of spalling theory. We reveal that graphene nanopattern not only works as a weakened interface for exfoliation, but also allows for dislocation reduction in heteroepitaxial films. This is because of the flexibility and the dangling-bond-free nature of graphene, which provides an additional path for strain relaxation. Therefore, these results represent a meaningful step toward production of high-quality single-crystal membranes that can be hetero-integrated.

Kim, Hyunseok↗
DOE OSTI2024

Synthesis of Microscopic 3D Graphene for High‐Performance Supercapacitors with Ultra‐High Areal Capacitance

Abstract Despite graphene being considered an ideal supercapacitor electrode material, its use in commercial devices is limited because few methods exist to produce high‐quality graphene at a large scale and low cost. A simple method is reported to synthesize 3D graphene by graphenization of coal tar pitch with a K 2 CO 3 catalyst. This produces 3D graphenes with high specific surface areas up to 2113 m 2 g −1 and exceptional crystallinity (Raman I D / I G as low as ≈0.15). The material has an outstanding specific capacitance of 182.6 F g −1 at a current density of 1.0 A g −1 . This occurs at a mass loading of 30 mg cm −2 which is 3 times higher than commercial requirements, yielding an ultra‐high areal capacitance of 5.48 F cm −2 . The K 2 CO 3 is recycled and reused over 10 cycles with material quality and electrocapacitive performance of 3D graphene retained and verified after each cycle. The synthesis method and resulting electrocapacitive performance properties create new opportunities for using 3D graphene more broadly in practical supercapacitor devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Theory-Guided X-ray Absorption Spectroscopy Approach for Identifying Active Sites in Atomically Dispersed Transition-Metal Catalysts

Atomically dispersed supported metal catalysts offer new properties and the benefits of maximized metal accessibility and utilization. The characterization of these materials, however, remains challenging. Using atomically dispersed platinum supported on crystalline MgO (chosen for its well-defined bonding sites) as a prototypical example, we demonstrate in this work how systematic density functional theory calculations for assessing all the potentially stable platinum sites, combined with automated analysis of extended X-ray absorption fine structure (EXAFS) spectra, leads to unbiased identification of isolated, surface-enveloped platinum cations as the catalytic species for CO oxidation. The catalyst has been characterized by atomic-resolution imaging and EXAFS and high-energy resolution fluorescence detection X-ray absorption near edge spectroscopy. The proposed platinum sites are in agreement with experiment. This theory-guided workflow leads to rigorously determined structural models and provides a more detailed picture of the structure of the catalytically active site than what is currently possible with conventional EXAFS analyses. As this approach is efficient and agnostic to the metal, support, and catalytic reaction, we posit that it will be of broad interest to the materials characterization and catalysis communities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Making sense of vacancy correlations with single-crystal diffuse scattering data

Local ordering of atoms within a crystalline structure is increasingly recognized as essential to understanding the properties of a variety of interesting materials. This is shown by the success of pair distribution function (PDF) analysis of scattering data from powder samples to investigate departures from perfectly crystalline order (Billinge & Kanatzidis, 2004; Egami & Billinge, 2012). Diffuse scattering from single crystals can also be a powerful probe of local order, potentially providing key information that would be difficult to obtain from PDF methods; however, difficulties in both measurement and interpretation of data have too often restricted their use by a larger community. In this issue of IUCrJ, Rothet al.(2020) demonstrate how simple concepts can be applied to better understand single-crystal diffuse scattering from half-Heusler systems.

36 MATERIALS SCIENCE↗
NASA NTRS2012

New Technology for Microfabrication and Testing of a Thermoelectric Device for Generating Mobile Electrical Power

Thermoelectric (TE) power generation is an increasingly important power generation technology. Major advantages include: no moving parts, low-weight, modularity, covertness/silence, high power density, low amortized cost, and long service life with minimum or no required maintenance. Despite low efficiency of power generation, there are many specialized needs for electrical power that TE technologies can uniquely and successfully address. Recent advances in thermoelectric materials technology have rekindled acute interest in thermoelectric power generation. We have developed single crystalline n- and p- type PbTe crystals and are also, developing PbTe bulk nanocomposites using PbTe nano powders and emerging filed assisted sintering technology (FAST). We will discuss the materials requirements for efficient thermoelectric power generation using waste heat at intermediate temperature range (6500 to 8500 K). We will present our recent results on production of n- and p- type PbTe crystals and their thermoelectric characterization. Relative characteristics and performance of PbTe bulk single crystals and nano composites for thermoelectric power generation will be discussed.

Prasad, Narasimha S.↗
DOE OSTI2020

Superconductivity in a uranium containing high entropy alloy

Abstract High entropy alloys (HEA) are an unusual class of materials where mixtures of elements are stochastically arrayed on a simple crystalline lattice. These systems exhibit remarkable functionality, often along several distinct axes: e.g., the examples [TaNb] 1-x (TiZrHf) x are high strength and damage resistant refractory metals that also exhibit superconductivity with large upper critical fields. Here we report the discovery of an f -electron containing HEA, [TaNb] 0.31 (TiUHf) 0.69 , which is the first to include an actinide ion. Similar to the Zr-analogue, this material crystallizes in a body-centered cubic lattice with the lattice constant a = 3.41(1) Å and exhibits phonon mediated superconductivity with a transition temperatures T c ≈ 3.2 K and upper critical fields H c2 ≈ 6.4 T. These results expand this class of materials to include actinide elements, shows that superconductivity is robust in this sub-group, and opens the path towards leveraging HEAs as functional waste forms for a variety of radioisotopes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Influence of Heat Treatments in H 2 and Ar on the E 1 center in β -Gs 2 O 3

In this report the influence of heat treating n-type bulk β-Ga 2 O 3 in hydrogen (H2) and argon (Ar) gases on the presence of the defect level commonly labeled as E 1 was studied. Fourier transform-infrared spectroscopy confirms that hydrogen (H) is incorporated into β-Ga 2 O 3 during H 2 annealing at 900 °C. Deep-level transient spectroscopy measurements reveal that the concentration of the E 1 level is promoted by the introduction of H, in contrast to what is observed in samples heat-treated in an Ar flow. We further find the E 1 level to be stable against heat treatments at 650 K, both with and without an applied reverse-bias voltage. Potential candidates for the defect origin of E 1 are investigated using hybrid-functional calculations, and three types of defect complexes involving H are found to exhibit charge-state transition levels compatible with E 1 , including substitutional H at one of the threefold coordinated O sites, Ga-substitutional shallow donor impurities passivated by H, and certain configurations of singly hydrogenated Ga–O divacancies. Among these types, only the latter exhibit H binding energies that are consistent with the observed thermal stability of E 1 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Disentangling Coexisting Structural Order Through Phase Lock-In Analysis of Atomic-Resolution STEM Data

As a real-space technique, atomic-resolution STEM imaging contains both amplitude and geometric phase information about structural order in materials, with the latter encoding important information about local variations and heterogeneities present in crystalline lattices. Such phase information can be extracted using geometric phase analysis (GPA), a method which has generally focused on spatially mapping elastic strain. Here we demonstrate an alternative phase demodulation technique and its application to reveal complex structural phenomena in correlated quantum materials. As with other methods of image phase analysis, the phase lock-in approach can be implemented to extract detailed information about structural order and disorder, including dislocations and compound defects in crystals. Extending the application of this phase analysis to Fourier components that encode periodic modulations of the crystalline lattice, such as superlattice or secondary frequency peaks, we extract the behavior of multiple distinct order parameters within the same image, yielding insights into not only the crystalline heterogeneity but also subtle emergent order parameters such as antipolar displacements. When applied to atomic-resolution images spanning large (~0.5 × 0.5 μm 2 ) fields of view, this approach enables vivid visualizations of the spatial interplay between various structural orders in novel materials.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Predicting the influence of particle size on the glass transition temperature and viscosity of secondary organic material

Abstract Atmospheric aerosols can assume liquid, amorphous semi-solid or glassy, and crystalline phase states. Particle phase state plays a critical role in understanding and predicting aerosol impacts on human health, visibility, cloud formation, and climate. Melting point depression increases with decreasing particle diameter and is predicted by the Gibbs–Thompson relationship. This work reviews existing data on the melting point depression to constrain a simple parameterization of the process. The parameter $$\xi $$ ξ describes the degree to which particle size lowers the melting point and is found to vary between 300 and 1800 K nm for a wide range of particle compositions. The parameterization is used together with existing frameworks for modeling the temperature and RH dependence of viscosity to predict the influence of particle size on the glass transition temperature and viscosity of secondary organic aerosol formed from the oxidation of $$\alpha $$ α -pinene. Literature data are broadly consistent with the predictions. The model predicts a sharp decrease in viscosity for particles less than 100 nm in diameter. It is computationally efficient and suitable for inclusion in models to evaluate the potential influence of the phase change on atmospheric processes. New experimental data of the size-dependence of particle viscosity for atmospheric aerosol mimics are needed to thoroughly validate the predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Strong polaronic effect in a superatomic two-dimensional semiconductor

Crystalline solids assembled from superatomic building blocks are attractive functional materials due to their hierarchical structure, multifunctionality, and tunability. An interesting example is Re 6 Se 8 Cl 2 , in which the Re 6 Se 8 building blocks are covalently linked into two-dimensional (2D) sheets that are stacked into a layered van der Waals solid. It is an indirect gap semiconductor that, when heavily doped, becomes a superconductor at low temperatures. Given the finite electronic bandwidths (300–400 meV), carrier properties in this material are expected to be strongly influenced by coupling to phonons. Here, we apply angle-resolved photoemission spectroscopy to probe the valence band edge (VBE) of Re 6 Se 8 Cl 2 . We find that dispersion of the VBE is a strong function of temperature. The bandwidth is W = 120 ± 30 meV at 70 K and decreases by one order of magnitude to W ~ 10 ± 20 meV as temperature is increased to 300 K. This observation reveals the dominant polaronic effects in Re 6 Se 8 Cl 2 , consistent with the Holstein polaron model commonly used to describe molecular solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Impact of 2D–3D Heterointerface on Remote Epitaxial Interaction through Graphene

Remote epitaxy has drawn attention as it offers epitaxy of functional materials that can be released from the substrates with atomic precision, thus enabling production and heterointegration of flexible, transferrable, and stackable freestanding single-crystalline membranes. In addition, the remote interaction of atoms and adatoms through two-dimensional (2D) materials in remote epitaxy allows investigating and utilizing electrical/chemical/physical coupling of bulk (3D) materials via 2D materials (3D-2D-3D coupling). Here, we unveil the respective roles and impacts of the substrate material, graphene, substrate-graphene interface, and epitaxial material for electrostatic coupling of these materials, which governs cohesive ordering and can lead to single-crystal epitaxy in the overlying film. Further, we show that simply coating a graphene layer on wafers does not guarantee successful implementation of remote epitaxy, since atomically precise control of the graphene-coated interface is required, and provide key considerations for maximizing the remote electrostatic interaction between the substrate and adatoms. This was enabled by exploring various material systems and processing conditions, and we demonstrate that the rules of remote epitaxy vary significantly depending on the ionicity of material systems as well as the graphene-substrate interface and the epitaxy environment. The general rule of thumb discovered here enables expanding 3D material libraries that can be stacked in freestanding form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

III-V aresenide-nitride semiconductor materials and devices

III-V arsenide-nitride semiconductor crystals, methods for producing such crystals and devices employing such crystals. Group III elements are combined with group V elements, including at least nitrogen and arsenic, in concentrations chosen to lattice match commercially available crystalline substrates. Epitaxial growth of these III-V crystals results in direct bandgap materials, which can be used in applications such as light emitting diodes and lasers. Varying the concentrations of the elements in the III-V crystals varies the bandgaps, such that materials emitting light spanning the visible spectra, as well as mid-IR and near-UV emitters, can be created. Conversely, such material can be used to create devices that acquire light and convert the light to electricity, for applications such as full color photodetectors and solar energy collectors. The growth of the III-V crystals can be accomplished by growing thin layers of elements or compounds in sequences that result in the overall lattice match and bandgap desired.

Major, Jo S.↗
DOE OSTI2024

Enhancing sorption kinetics by oriented and single crystalline array-structured ZSM-5 film on monoliths

Abstract To enhance the reaction kinetics without sacrificing activity in porous materials, one potential solution is to utilize the anisotropic distribution of pores and channels besides enriching active centers at the reactive surfaces. Herein, by designing a unique distribution of oriented pores and single crystalline array structures in the presence of abundant acid sites as demonstrated in the ZSM-5 nanorod arrays grown on monoliths, both enhanced dynamics and improved capacity are exhibited simultaneously in propene capture at low temperature within a short duration. Meanwhile, the ZSM-5 array also helps mitigate the long-chain HCs and coking formation due to the enhanced diffusion of reactants in and reaction products out of the array structures. Further integrating the ZSM-5 array with Co 3 O 4 nanoarray enables comprehensive propene removal throughout a wider temperature range. The array structured film design could offer energy-efficient solutions to overcome both sorption and reaction kinetic restrictions in various solid porous materials for various energy and chemical transformation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗