Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cross section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

UV Absorption Cross Sections of Nitrous Oxide (N2O) and Carbon Tetrachloride (CCl4) Between 210 and 350 K and the Atmospheric Implications

Absorption cross sections of nitrous oxide (N2O) and carbon tetrachloride (CCl4) are reported at five atomic UV lines (184.95, 202.548, 206.200, 213.857, and 228.8 nm) at 27 temperatures in the range 210-350 K. In addition, UV absorption spectra of CCl4 are reported between 200-235 nm as a function of temperature (225-350 K). The results from this work are critically compared with results from earlier studies. For N2O, the present results are in good agreement with the current JPL recommendation enabling a reduction in the estimated uncertainty in the N2O atmospheric photolysis rate. For CCl4, the present cross section results are systematically greater than the current recommendation at the reduced temperatures most relevant to stratospheric photolysis. The new cross sections result in a 5-7% increase in the modeled CCl4 photolysis loss, and a slight decrease in the stratospheric lifetime, from 51 to 50 years, for present day conditions. The corresponding changes in modeled inorganic chlorine and ozone in the stratosphere are quite small. A CCl4 cross section parameterization for use in 37 atmospheric model calculations is presented.

Carlon, Nabilah Rontu↗

Measurement of the B 10 ( α , n 0 ) 13 N cross section for 2.2 < E α < 4.9 MeV and its application as a diagnostic at the National Ignition Facility

We present that the National Ignition Facility (NIF) provides the opportunity to study nuclear reactions under controlled conditions at high temperatures and pressures at a level never before achieved. However, the timescale of the deuterium-tritium (DT) implosion is only a few nanoseconds, making data collection and diagnostics very challenging. One method that has been proposed for obtaining additional information about the conditions of the implosion is to activate a dopant material using the α particles produced from the DT fuel as a diagnostic. The yield of the activated material can give a measure of the mixing that occurs in the capsule. One of the reactions that has been proposed is 10 B(α,n) 13 N as it produces a radioactive reactant product with a convenient half-life of ≈10 min. Although this reaction has several advantages for the application at hand, it has not seen much study in the present literature, resulting in large uncertainties in the cross section. Furthermore, for the current application, the cross section must be well characterized. With this motivation, the 10 B(α,n) 13 N cross section has been remeasured for 2.2 < E α < 4.9MeV with the angle-integrated ground-state cross section reported for the first time. Lastly, the present results, combined with previous measurements, allow for a determination of the cross section to a significantly higher degree of accuracy and precision than obtained previously and are shown to be consistent with thick-target measurements. Preliminary calculations are performed to test the feasibility of this reaction as a diagnostic for a NIF implosion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The total scattering cross sections for H2 + H2, D2 + D2, and HD + HD for relative collision energies below 10 meV

Relative total scattering cross sections for normal H2 + normal H2, para-H2 + para-H2, normal D2 + normal D2, ortho-D2 + ortho-D2, and HD + HD were measured at energy below 10 meV by colliding particles from two inclined nozzle beams. Cross sections for the H2 + H2 pairs were measured over a relative velocity range of 200-1450 m/s; the normal H2 + normal H2 results suggest a l = 3 orbiting resonance near 375 m/s while the para-H2 + para-H2 results have a l = 4 orbiting resonance near 585 m/s. This latter resonance has a peak energy of 1.79 meV and a FWHM of 1.05 meV. The D2 + D2 cross sections were measured over the velocity range of 190 to 1000 m/s and a minimum between the l = 4 and l = 5 orbiting resonances was observed. Some preliminary measurements on HD + HD over the range of 250-1250 m/s indicate a possible l = 4 orbiting resonance near 300 m/s. The experimental work compares favorably to cross sections calculated from a theoretical potential.

Johnson, D. L.↗

Combination and interpretations of t anti-t cross section measurements with the D0 detector

We combine measurements of the top quark pair production cross section in p{bar p} collisions in the {ell}+jets, {ell}{ell} and {tau}{ell} final states (where {ell} is an electron or muon) at a center of mass energy of {radical}s = 1.96 TeV in 1 fb{sup -1} of data collected with the D0 detector. For a top quark mass of 170 GeV/c{sup 2}, we obtain {sigma}{sub t{bar t}} = 8.18{sub -0.87}{sup +0.98} pb in agreement with the theoretical prediction. Based on predictions from higher order quantum chromodynamics, we extract a mass for the top quark from the combined t{bar t} cross section, consistent with the world average of the top quark mass. In addition, the ratios of t{bar t} cross sections in different final states are used to set upper limits on the branching fractions B(t {yields} H{sup +}b {yields} {tau}{sup +}{nu}b) and B(t {yields} H{sup +}b {yields} c{bar s}b) as a function of charged Higgs boson mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inclusive and differential cross section measurements of $ \textrm{t}\overline{\textrm{t}}\textrm{b}\overline{\textrm{b}} $ production in the lepton+jets channel at $ \sqrt{s} $ = 13 TeV

Measurements of inclusive and normalized differential cross sections of the associated production of top quark-antiquark and bottom quark-antiquark pairs, $ \textrm{t}\overline{\textrm{t}}\textrm{b}\overline{\textrm{b}} $, are presented. The results are based on data from proton-proton collisions collected by the CMS detector at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb$^{−1}$. The cross sections are measured in the lepton+jets decay channel of the top quark pair, using events containing exactly one isolated electron or muon and at least five jets. Measurements are made in four fiducial phase space regions, targeting different aspects of the $ \textrm{t}\overline{\textrm{t}}\textrm{b}\overline{\textrm{b}} $ process. Distributions are unfolded to the particle level through maximum likelihood fits, and compared with predictions from several event generators. The inclusive cross section measurements of this process in the fiducial phase space regions are the most precise to date. In most cases, the measured inclusive cross sections exceed the predictions with the chosen generator settings. The only exception is when using a particular choice of dynamic renormalization scale, $ {\mu}_{\textrm{R}}=\frac{1}{2}{\prod}_{i=\textrm{t},\overline{\textrm{t}},\textrm{b},\overline{\textrm{b}}}{m}_{\textrm{T},i}^{1/4} $, where $ {m}_{\textrm{T},i}^2={m}_i^2+{p}_{\textrm{T},i}^2 $ are the transverse masses of top and bottom quarks. The differential cross sections show varying degrees of compatibility with the theoretical predictions, and none of the tested generators with the chosen settings simultaneously describe all the measured distributions.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Benchmark for Free-Gas Elastic Scattering with the Heavy-Gas Model and Piecewise-Constant Cross Sections

Accurate Monte Carlo calculations involving thermal neutrons require that codes implement the thermal scattering physics correctly. The heavy-gas model, which is valid for large atomic mass, with constant cross sections in energy has an analytic solution for the thermal neutron spectrum that can be readily used to verify the implementation of the free-gas thermal scattering routines. Previous work has shown that MCNP6.1 correctly computes the free-gas thermal flux with constant cross sections. This summary extends the verification to piecewise-constant cross sections in energy that can better approximate physically realistic cross sections. The obtained solutions for the piecewise-constant cases agree with the respective thermal spectra obtained by MCNP6.1, further verifying that it is accurately simulating the free-gas model. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nonperturbative Algorithm for the Resistive Wall Impedance of General Cross-Section Beam Pipes.

Nonperturbative algorithm for the resistive wall impedance of general cross-section beam pipes; ABSTRACT = We present an algorithm for calculating the impedance of infinitely long beam pipes with arbitrary cross section. The method is not restricted to ultrarelativistic beams or perturbative approximations with respect to the wall surface impedance or skin penetration depth. We exemplify our algorithm with a calculation of the impedance for rectangular metallic beam pipes. Unlike the situation in the perturbative regime, where the beam pipe geometry modifies the metallic resistive-wall impedances by only a multiplicative factor, the beam pipe geometry has a more complex influence on the impedance when nonultrarelativistic effects are significant and in the ultrarelativistic regime at both small and large frequencies. Since our algorithm requires the boundary conditions at the beam pipe wall to be provided as linear relations between the transverse components of the electromagnetic field, we discuss a general algorithm to calculate these boundary conditions for multilayer beam pipes with arbitrary cross section.

Macridin, Alexandru↗

Medium effects on intermediate-energy one-nucleon removal cross sections

The influence of Pauli-blocking medium effects on intermediate-energy one-nucleon removal cross sections for sd-shell nuclei have been investigated using density-dependent nucleon-nucleon interaction cross sections within the S-matrix formalism under the Glauber approximation. All considered prescriptions for the density dependence result in a reduction of the one-nucleon removal cross sections. The effect is smaller than 20% for incident energies between 50 and 100 MeV/nucleon, and smaller than a few percent above 200 MeV/nucleon.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the cross section of top quark pairs produced in association with a Photon in Lepton +Jets events at $\sqrt{s}$ = 13 TeV with full Run II CMS data

The inclusive production cross section of top quark pairs in association with a photon is measured in proton-proton collisions at the LHC with 13 TeV energy using the full RunII data collected by CMS in 2016, 2017, and 2018 with a total corresponding integrated luminosity of 137 fb$^{-1}$. The relative fraction of t$ \bar{t} \gamma$ events normalized to inclusive t$ \bar{t}$ production is measured. The cross section measurement provides important information about the electromagnetic coupling of the standard model top quark and is sensitive to physics beyond the standard model. The analysis is carried out in the in semileptonic decay channel with a well isolated high P$ \_{T}$ lepton (electron and muon), at least four jets out of which at least one must be b-tagged, and an isolated photon. Photons may be emitted from initial state radiation, top quarks, and decay products of top quarks. The fiducial phase space with a photon of transverse momentum $ \ge$ 20 GeV and j\x11$ \eta$ <1.4441 is used. A simultaneous likelihood fit of control regions with the signal region is done to constraint the backgrounds and to extract the t$ \bar{t} \gamma$ cross section. The measurement of the ratio of t$ \bar{t} \gamma$ to t$ \bar{t}$ is $0.02055 \pm 0.00099$ (syst.) $ \pm 0.00099$ (stat.) in $e$ channel , 0.02156 $ \pm$ 0.00068 (syst.) $ \pm$ 0.00068 (stat.) in $ \mu$ channel , and 0.02203 $ \pm$ 0.00064 (syst.) $ \pm$ 0.00064 (stat.) in e + $ \mu$ channel , respectively. The measured inclusive cross section is 3.81 $ \pm$ 0.15 (syst.) $ \pm$ 0.10 (stat.) pb in e channel , 3.87 $ \pm$ 0:11 (syst.) $ \pm$ 0:07 (stat.) pb in $ \mu$ channel , and 3.96 $ \pm$ 0.10 (syst.) $ \pm$ 0.06 (stat.) pb in e + $ \mu$ channel , respectively for full RunII data. The total inclusive cross section with a photon of transverse momentum $ \ge$ 20 GeV is found to be 3.96 $ \pm$ 0.10 (syst.) $ \pm$ 0.06 (stat.) pb with full RunII CMS data. The results are in agreement with the standard model next to leading order prediction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Double-pion electroproduction off protons in deuterium: Quasifree cross sections and final-state interactions

Here, the single-differential and fully integrated cross sections for quasi-free $π^+π^-$ electroproduction off protons bound in deuterium have been extracted for the first time. The experimental data were collected at Jefferson Laboratory with the CLAS detector. The measurements were performed in the kinematic region of the invariant mass W from 1.3 GeV to 1.825 GeV and photon virtuality Q 2 from 0.4 GeV2 to 1.0 GeV 2 . Sufficient experimental statistics allow for narrow binning in all kinematic variables, while maintaining a small statistical uncertainty. The extracted cross sections were compared with the corresponding cross sections off free protons, which allowed us to obtain an estimate of the contribution from events in which interactions between the final-state hadrons and the spectator neutron took place.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of inclusive W and Z cross sections in pp collisions at sqrt(s)=7 TeV

Measurements of inclusive W and Z boson production cross sections in pp collisions at sqrt(s)=7 TeV are presented, based on 2.9 inverse picobarns of data recorded by the CMS detector at the LHC. The measurements, performed in the electron and muon decay channels, are combined to give sigma(pp to WX) times B(W to muon or electron + neutrino) = 9.95 \pm 0.07(stat.) \pm 0.28(syst.) \pm 1.09(lumi.) nb and sigma(pp to ZX) times B(Z to oppositely charged muon or electron pairs) = 0.931 \pm 0.026(stat.) \pm 0.023(syst.) \pm 0.102(lumi.) nb. Theoretical predictions, calculated at the next-to-next-to-leading order in QCD using recent parton distribution functions, are in agreement with the measured cross sections. Ratios of cross sections, which incur an experimental systematic uncertainty of less than 4%, are also reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron Impact Excitation Cross Section Measurement for n=3 to n=2 Line Emission in Fe(17+) to Fe(23+)

We have measured the electron impact excitation cross sections for the strong iron L-shell 3 --> 2 lines of Fe XVIII to Fe XXIV at the EBIT-I electron beam ion trap using a crystal spectrometer and NASA-Goddard Space Flight Centers 6 x 6 pixel array microcalorimeter. The cross sections were determined by direct normalization to the well established cross section of radiative electron capture through a sophisticated model analysis which results in the excitation cross section for the strong Fe L-shell lines at multiple electron energies. This measurement is part of a laboratory X-ray astrophysics program utilizing the Livermore electron beam ion traps EBIT-I and EBIT-II.

Chen, H.↗

Analytical ionization cross sections for atomic collisions

General analytical expressions for cross sections for direct ionization in atom-atom collisions are evaluated using the classical impulse approximation. The approach is also applied to ion-atom and molecule-molecule interactions. The overall accuracy of the obtained cross sections in a broad range of energy is better, when compared with existing measurements for many collision systems, than accuracy of other analytical predictions available in literature.

Kunc, J. A.↗

Modeled Neutron and Charged-Particle Induced Nuclear Reaction Cross Sections and their Uncertainties in the Region 37 < A < 47 (Rb-Ag)

A modeling effort to calculate nuclear reaction cross sections for use in radiochemical di-agnostics is presented. Systematics for the input parameters required by the Hauser-Feshbachstatistical model were developed and used to calculate neutron, proton, and deuteron inducednuclear reaction cross sections for targets ranging from Rubidium (Z= 37) to Silver (Z= 47).This is an expansion of the previous modeling effort described in Hoffman et. al. 2006(UCRL-TR-222275) that allows us to now calculate all new cross sections for radiochemical detector sets Rb, Rh, and Ag. We have also developed new systematics affecting our treatments of the nuclear level density and the gamma-ray strength function. Coupled with a range of the main parameter that affects pre-equilibrium, we develop upper and lower bounds to our recommended cross sections

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Absolute cross section for photoionization of atomic oxygen

The absolute cross section for photoionization of atomic oxygen from the 2p4 3P ground state of O(0) to the 2p3 4S ground state of O(+) has been measured at five narrow wavelength intervals between 89.8 and 76.2 nm. The cross section near the 2p3 4S threshold is 4.5 Mb + or - 7%. Recent calculations by Taylor and Burke (1976) and by Pradhan and Saraph (1977) are in reasonable agreement with this work. The dipole-length results of Taylor and Burke (4.1 Mb) are in better agreement with the experiment than their dipole-velocity results (3.2 Mb).

Kohl, J. L.↗

Measurement of the t t &#xAF; production cross-section using e &#x3BC; events with b -tagged jets in p p collisions at s = 7 and 8 TeV with the ATLAS detector

CERN-LHC. The inclusive top quark pair production cross-section has been measured in proton-proton collisions at sqrt(s) = 7 TeV and sqrt(s) = 8 TeV with the ATLAS experiment at the LHC, using ttbar events with an opposite-charge e-mu pair in the final state. The measurement was performed with the 2011 7 TeV dataset corresponding to an integrated luminosity of 4.6 fb-1 and the 2012 8 TeV dataset of 20.3 fb-1. The numbers of events with exactly one and exactly two b-tagged jets were counted and used to simultaneously determine sigma(ttbar) and the efficiency to reconstruct and b-tag a b-jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section was measured to be: sigma(ttbar) = 182.9 +- 3.1 +- 4.2 +- 3.6 +- 3.3 pb (7 TeV) and sigma(ttbar) = 242.4 +- 1.7 +- 5.5 +- 7.5 +- 4.2 pb (8 TeV), where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the knowledge of the integrated luminosity and of the LHC beam energy. The results are consistent with recent theoretical QCD calculations at NNLO. Fiducial measurements corresponding to the experimental acceptance of the leptons are also reported, together with the ratio of cross-sections measured at the two centre-of-mass energies. The inclusive cross-section results were used to determine the top quark pole mass via the dependence of the theoretically-predicted cross-section on mpolet, giving a result of mpolet = 172.9 +2.5,-2.6 GeV. By looking for an excess of ttbar production with respect to the QCD prediction, the results were also used to place limits on the pair-production of supersymmetric top squarks with masses close to the top quark mass decaying to predominantly right-handed top quarks and a light neutralino, the lightest supersymmetric particle. Top squarks with masses between the top quark mass and 177 GeV are excluded at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutrino cross-sections: Experiments

Neutrino-nucleus cross-sections are as of today the main source of systematic errors for oscillation experiments together with neutrino flux uncertainties. Despite recent experimental and theoretical developments, future experiments require even higher precisions in their search of CP violation. We will review the experimental status and explore possible future developments required by next generation of experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of cross sections for inelastic cold-neutron scattering in metals and polymers by the method of (n, {gamma}) analysis

The results obtained by measuring the cross sections for the inelastic scattering of very cold neutrons for a number of metals and polymers by the method of a neutron-irradiation analysis are presented. The method is based on simultaneously measuring events of inelastic scattering and neutron capture in the sample under investigation via recording gamma radiation with a semiconductor germanium detector. Neutron capture by a nucleus of the sample is accompanied by the prompt radiation of gamma rays having a known spectrum. Upon inelastic scattering, a neutron acquires thermal energy. Upon leaving the sample, this neutron is absorbed in a special converter that contains the isotope {sup 10}B. The capture of the neutron by a {sup 10}B nucleus is followed by the emission of a 477-keV gamma ray. The probabilities of capture and inelastic scattering are proportional to the respective neutron-interaction cross sections, and the ratio of the recorded detector counts corresponding to events of the two types does not depend on the spectrum of the incident flux of very cold neutrons or on the trajectory of neutron motion in the sample. The sought inelastic-scattering cross section at a fixed sample temperature is calculated by using this ratio and the known cross section for neutron capture by the sample isotope having a known gamma-radiation spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗