Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “criticality simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Bottom-up synthesis of mesoscale nanomeshes of graphene nanoribbons on germanium

The synthesis of functional graphene nanostructures on Ge(001) provides an attractive route toward integrating graphene-based electronic devices onto complementary metal oxide semiconductor-compatible platforms. In this study, we leverage the phenomenon of the anisotropic growth of graphene nanoribbons from rationally placed graphene nanoseeds and their rotational self-alignment during chemical vapor deposition to synthesize mesoscale graphene nanomeshes over areas spanning several hundred square micrometers. Lithographically patterned nanoseeds are defined on a Ge(001) surface at pitches ranging from 50 to 100 nm, which serve as starting sites for subsequent nanoribbon growth. Rotational self-alignment of the nanoseeds followed by anisotropic growth kinetics causes the resulting nanoribbons to be oriented along each of the equivalent, orthogonal Ge < 110 > directions with equal probability. As the nanoribbons grow, they fuse, creating a continuous nanomesh. In contrast to nanomesh synthesis via top-down approaches, this technique yields nanomeshes with atomically faceted edges and covalently bonded junctions, which are important for maximizing charge transport properties. Additionally, we simulate the electrical characteristics of nanomeshes synthesized from different initial nanoseed-sizes, size-polydispersities, pitches, and device channel lengths to identify a parameter-space for acceptable on/off ratios and on-conductance in semiconductor electronics. The simulations show that decreasing seed diameter and pitch are critical to increasing nanomesh on/off ratio and on-conductance, respectively. With further refinements in lithography, nanomeshes obtained via seeded synthesis and anisotropic growth are likely to have superior electronic properties with tremendous potential in a multitude of applications, such as radio frequency communications, sensing, thin-film electronics, and plasmonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Overview of the SCEC/USGS Community Stress Drop Validation Study Using the 2019 Ridgecrest Earthquake Sequence

We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress-drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude-spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress-drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two-week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. Here, in this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite-fault modeling, ground-motion-based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between-method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress-drop values.

58 GEOSCIENCES↗
DOE OSTI2021

Toward Hybrid Physics-Machine Learning to improve Land Surface Model predictions

A critical challenge for Land Surface Models (LSMs) is to simulate processes at the surface and the subsurface and their feedbacks to the atmosphere. Even using the same climate forcings, different LSMs predict different surface fluxes and soil moisture conditions due to differences in the formulations of individual processes, parameterizations, and representation of spatial heterogeneity. Ultimately, these differences contribute to the LSM prediction errors and uncertainty. This research seeks to address this challenge by coupling physics-based modeling with state-of-the-art machine learning (ML) techniques to describe complex physical and biogeochemical processes and narrow the gap between model predictions and observations.

58 GEOSCIENCES↗
DOE OSTI2022

Evaluated 238 U(n,f) Average Prompt Fission Neutron Multiplicities Including the CGMF Model

This report documents an evaluation of the average prompt fission neutron multiplicity, $\overline{v}_p$, of 238 U from 800 keV to MeV. This evaluation had to be re-done from “scratch” as the input to previous $\overline{v}_p$ evaluations, specifically ENDF/B-VIII.0, was not found. That means that all available experimental data were re-analyzed and uncertainties were re-estimated. The new evaluated 238 U $\overline{v}_p$ based on only experimental data differs distinctly from ENDF/B-VIII.0 $\overline{v}_p$ from 2 to 4.5 MeV, and from 6 to 7 MeV, and is otherwise similar. The difference from 2 to 4.5 MeV stems from the fact that ENDF/B-VIII.0 was tweaked in this energy range to data of Frehaut, while two other, equally trustworthy, data sets would indicate an evaluated 238 U $\overline{v}_p$ that is up to 2% higher. Also, second chance fission in ENDF/B-VIII.0 was smoothed over from 6–7 MeV. Another major difference to ENDF/B-VIII.0 is that one of the evaluations presented here includes model information from the Hauser-Feshbach fission fragment decay code CGMF, while ENDF/B-VIII.0 is based purely on experimental data. CGMF links several fission quantities with each other; $\overline{v}_p$ is predicted by assumptions made on, e.g., pre-neutron emission yields as a function of mass, the total kinetic energy, or spin and parity of fission fragments. This allows to validate the new 238 U $\overline{v}_p$ by using CGMF parameters obtained from fitting to experimental 238 U $\overline{v}_p$ to predict yields as a function of mass, the average total kinetic energy, or the mean energy of the prompt fission neutron spectrum. These model-predicted values can then be compared to experimental and evaluated data. The model-predicted fission-observable values using evaluated parameters obtained here are reasonably close to experimental data for some observables, but are farther away from experimental data related to TKE observables. In addition to that, the evaluated 238 U(n,f) $\overline{v}_p$ shows similar deviations from ENDF/B-VIII.0 as for the evaluation with only experimental data. This difference is expected to lead to changes in simulated effective neutron multiplication factor, $k_{eff}$ of ICSBEP critical assemblies that are sensitive to 238 U in the fast range (BigTen, Flattop, Flattop-Pu). These changes in $k_{eff}$ need to be counter-balanced. Chi-Nu PFNS experimental data are expected to be released in the next few months that might lead to the needed changes in the PFNS. Until then, we hold off in benchmarking the new 238 U(n,f) $\overline{v}_p$ as well as submitting it to ENDF/B-VIII.1. Also, new high-precision 238 U $\overline{v}_p$ are expected to be measured by the CEA in the next two years that will shed further light on question on 238 U $\overline{v}_p$ from 2–4.5 and 6–7 MeV.

238U↗
DOE OSTI2025

Phase-Field Modeling of Damage Evolution in Ceramic Matrix Composite (CMC) and Environmental Barrier Coating (EBC)

Ceramic matrix composites (CMCs) protected by environmental barrier coatings (EBCs) present a promising materials solution for next generation gas turbines. Developments of more robust and efficient EBCs and mechanically tougher CMCs are thus of significant technological importance. Here we develop a phase-field modeling framework that incorporates the thermally grown oxide (TGO), recognized as a critical factor for degradation and failure of EBCs. We simulate crack growth in the TGO and the potential extension into the bond coat / CMC substrate. The model efficiently takes account of the large inelastic deformation induced by the severe volume expansion of TGO, thanks to our recently developed, so-called incremental realization of inelastic deformation (IRID) algorithm. A phase-field model is built for damage evolution in CMCs including crack growth and interfacial sliding. The effects of fiber layout and interfacial sliding on the macroscopic toughness of CMCs are revealed by large-scale simulations and compared to experiments.

advanced energy systems and materials↗
NASA NTRS1976

New thruster configurations for spacecraft attitude control systems

Design characteristics of thruster configurations for spacecraft attitude control systems investigated. A standard six engine approach is developed and used as the basis for comparison of different thruster configurations. These methods include cases of both skewed and non-skewed configurations. Simulation results are used as a basis for comparison, critical thruster design factors being given based on an analysis of the data.

Colburn, B. K.↗
NASA NTRS1976

Survey of computer programs for prediction of crash response and of its experimental validation

The author seeks to critically assess the potentialities of the mathematical and hybrid simulators which predict post-impact response of transportation vehicles. A strict rigorous numerical analysis of a complex phenomenon like crash may leave a lot to be desired with regard to the fidelity of mathematical simulation. Hybrid simulations on the other hand which exploit experimentally observed features of deformations appear to hold a lot of promise. MARC, ANSYS, NONSAP, DYCAST, ACTION, WHAM II and KRASH are among some of the simulators examined for their capabilities with regard to prediction of post impact response of vehicles. A review of these simulators reveals that much more by way of an analysis capability may be desirable than what is currently available. NASA's crashworthiness testing program in conjunction with similar programs of various other agencies, besides generating a large data base, will be equally useful in the validation of new mathematical concepts of nonlinear analysis and in the successful extension of other techniques in crashworthiness.

Kamat, M. P.↗
NASA NTRS1986

Design and evaluation of a failure detection and isolation algorithm for restructurable control systems

The use of a decentralized approach to failure detection and isolation for use in restructurable control systems is examined. This work has produced: (1) A method for evaluating fundamental limits to FDI performance; (2) Application using flight recorded data; (3) A working control element FDI system with maximal sensitivity to critical control element failures; (4) Extensive testing on realistic simulations; and (5) A detailed design methodology involving parameter optimization (with respect to model uncertainties) and sensitivity analyses. This project has concentrated on detection and isolation of generic control element failures since these failures frequently lead to emergency conditions and since knowledge of remaining control authority is essential for control system redesign. The failures are generic in the sense that no temporal failure signature information was assumed. Thus, various forms of functional failures are treated in a unified fashion. Such a treatment results in a robust FDI system (i.e., one that covers all failure modes) but sacrifices some performance when detailed failure signature information is known, useful, and employed properly. It was assumed throughout that all sensors are validated (i.e., contain only in-spec errors) and that only the first failure of a single control element needs to be detected and isolated. The FDI system which has been developed will handle a class of multiple failures.

Weiss, Jerold L.↗
NASA NTRS1990

Simulation of on-orbit modal tests of large space structures

This paper describes a procedure to analytically simulate a modal test of an on-orbit large space structure (LSS), extract the modal properties, and evaluate the success of the modal test. This procedure addresses some of the major challenges to performing an on-orbit modal test of an LSS including high modal density, low frequency modes, and limitations in excitation capabilities. A finite element model of the orbiting structure is used to predict acceleration responses due to thruster excitations, time-domain modal extraction methods are used to estimate the modal properties, and comparison of frequencies and cross-orthogonality values is used to evaluate the success of the modal test. Several alternative excitation patterns and sensor arrangements were evaluated using a space station model as an example. Results of the simulations indicate that the choice of excitation functions is critical to the success of the test.

Blelloch, Paul↗
NASA NTRS1990

Direct simulation of turbulent combustion

Understanding and modeling of turbulent combustion are key-problems in the computation of numerous practical systems. Because of the lack of analytical theories in this field and of the difficulty of performing precise experiments, direct simulation appears to be one of the most attractive tools to use in addressing this problem. The present work can be split into two parts: (1) Development and validation of a direct simulation method for turbulent combustion; (2) Applications of the method to premixed turbulent combustion problems. The goal of part 1 is to define and to test a numerical method for direct simulation of reacting flows. A high level of confidence should be attached to direct simulation results, and this can only be achieved through extensive validation tests. In part 2, direct simulation is used to address some of the many critical problems related to turbulent combustion. At the present time, I have limited this work to premixed combustion and considered only four basic issues: (1) The effect of pressure waves on flame propagation; (2) The interaction between flame fronts and vortices; (3) The influence of curvature on premixed flame fronts; and (4) The validation of flamelet models for premixed turbulent combustion.

Poinsot, T. J.↗
NASA NTRS1991

An upper limit for the rate coefficient of the reaction of NH2 radicals with O2 using FTIR product analysis

Fourier transform infrared spectrometry has been used to study the products of the photooxidation of ammonia in the presence of oxygen at 296 K. The data have been used to derive an upper limit of 6 x 10 exp -21/cu cm molecule s for the reaction of NH2 radicals with O2 to produce NO(x) at 296 K. This upper limit, which is three orders of magnitude lower than previous estimates based on the kinetics of NH2 loss, rules out the importance of this reaction in the atmosphere and suggests that NH2 will be oxidized by O3 or NO2. The effect on the NO(x) and N2O budgets depends critically on the products of the NH2 + O3 reaction. Simulations of the experimental product yields also allow an evaluation of possible product channels for the reaction of NH2 with HO2.

Tyndall, G. S.↗
NASA NTRS1994

Quantitative 3-D imaging topogrammetry for telemedicine applications

The technology to reliably transmit high-resolution visual imagery over short to medium distances in real time has led to the serious considerations of the use of telemedicine, telepresence, and telerobotics in the delivery of health care. These concepts may involve, and evolve toward: consultation from remote expert teaching centers; diagnosis; triage; real-time remote advice to the surgeon; and real-time remote surgical instrument manipulation (telerobotics with virtual reality). Further extrapolation leads to teledesign and telereplication of spare surgical parts through quantitative teleimaging of 3-D surfaces tied to CAD/CAM devices and an artificially intelligent archival data base of 'normal' shapes. The ability to generate 'topogrames' or 3-D surface numerical tables of coordinate values capable of creating computer-generated virtual holographic-like displays, machine part replication, and statistical diagnostic shape assessment is critical to the progression of telemedicine. Any virtual reality simulation will remain in 'video-game' realm until realistic dimensional and spatial relational inputs from real measurements in vivo during surgeries are added to an ever-growing statistical data archive. The challenges of managing and interpreting this 3-D data base, which would include radiographic and surface quantitative data, are considerable. As technology drives toward dynamic and continuous 3-D surface measurements, presenting millions of X, Y, Z data points per second of flexing, stretching, moving human organs, the knowledge base and interpretive capabilities of 'brilliant robots' to work as a surgeon's tireless assistants becomes imaginable. The brilliant robot would 'see' what the surgeon sees--and more, for the robot could quantify its 3-D sensing and would 'see' in a wider spectral range than humans, and could zoom its 'eyes' from the macro world to long-distance microscopy. Unerring robot hands could rapidly perform machine-aided suturing with precision micro-sewing machines, splice neural connections with laser welds, micro-bore through constricted vessels, and computer combine ultrasound, microradiography, and 3-D mini-borescopes to quickly assess and trace vascular problems in situ. The spatial relationships between organs, robotic arms, and end-effector diagnostic, manipulative, and surgical instruments would be constantly monitored by the robot 'brain' using inputs from its multiple 3-D quantitative 'eyes' remote sensing, as well as by contact and proximity force measuring devices. Methods to create accurate and quantitative 3-D topograms at continuous video data rates are described.

Altschuler, Bruce R.↗
NASA NTRS1999

CFD Data Generation Process for Nonlinear Loads

This paper discusses the development of a process to generate a CFD database for the non-linear loads process capability for critical loads evaluation at Boeing Long Beach. The CFD simulations were performed for wing/body configurations at high angles of attack and Reynolds numbers with transonic and elastic deflection effects. Convergence criteria had to be tailored for loads applications rather than the usual drag performance. The time-accurate approach was subsequently adopted in order to improve convergence and model possible unsteadiness in the flowfield. In addition, uncertainty issues relating to the turbulence model and grid resolution in areas of high vortical flows were addressed and investigated for one of the cases.

Arslan, Alan↗
NASA NTRS2003

Giant Molecular Cloud Structure and Evolution

Bodenheimer and Burkert extended earlier calculations of cloud core models to study collapse and fragmentation. The initial condition for an SPH collapse calculation is the density distribution of a Bonnor-Ebert sphere, with near balance between turbulent plus thermal energy and gravitational energy. The main parameter is the turbulent Mach number. For each Mach number several runs are made, each with a different random realization of the initial turbulent velocity field. The turbulence decays on a dynamical time scale, leading the cloud into collapse. The collapse proceeds isothermally until the density has increased to about 10(exp 13) g cm(exp -3). Then heating is included in the dense regions. The nature of the fragmentation is investigated. About 15 different runs have been performed with Mach numbers ranging from 0.3 to 3.5 (the typical value observed in molecular cloud cores is 0.7). The results show a definite trend of increasing multiplicity with increasing Mach number (M), with the number of fragments approximately proportional to (1 + M). In general, this result agrees with that of Fisher, Klein, and McKee who published three cases with an AMR grid code. However our results show that there is a large spread about this curve. For example, for M=0.3 one case resulted in no fragmentation while a second produced three fragments. Thus it is not only the value of M but also the details of the superposition of the various velocity modes that play a critical role in the formation of binaries. Also, the simulations produce a wide range of separations (10-1000 AU) for the multiple systems, in rough agreement with observations. These results are discussed in two conference proceedings.

Hollenbach, David↗
NASA NTRS2005

Aerosol-Cloud-Precipitation Interactions over Indo-Gangetic Basin

About 60% of world population reside in Asia, in term of which sheer population density presents a major environmental stress. Economic expansion in this region is, in fact, accompanied by increases in bio-fuel burning, industrial pollution, and land cover and land use changes. With a growth rate of approx. 8%/yr for Indian economy, more than 600 million people from Lahore, Pakistan to Calcutta, India over the Indo-Gangetic Basin have particularly witnessed increased frequencies of floods and droughts as well as a dramatic increase in atmospheric loading of aerosols (i.e., anthropogenic and natural aerosol) in recent decades. This regional change (e.g., aerosol, cloud, precipitation, etc.) will constitute a vital part of the global change in the 21st century. Better understanding of the impacts of aerosols in affecting monsoon climate and water cycles is crucial in providing the physical basis to improve monsoon climate prediction and for disaster mitigation. Based on climate model simulations, absorbing aerosols (dust and black carbon) play a critical role in affecting interannual and intraseasonal variability of the Indian monsoon. An initiative on the integrated (aerosols, clouds, and precipitation) measurements approach over the Indo-Gangetic Basin will be discussed. An array of ground-based (e.g., AERONET, MPLNET, SMART-COMMIT, etc.) and satellite (e.g., Terra, A-Train, etc.) sensors will be utilized to acquire aerosol characteristics, sources/sinks, and transport processes during the pre-monsoon (April-May, aerosol forcing) season, and to obtain cloud and precipitation properties during the monsoon (May-June, water cycle response) season. Close collaboration with other international programs, such as ABC, CLIVAR, GEWEX, and CEOP in the region is anticipated.

Tsay, S.-C.↗
NASA NTRS1996

Dynamic Modeling and Simulation Study for the Galileo Spacecraft Pulsed-Mode Spinup/400 N Main Engine Burn/Spindown Maneuvers

Two Galileo dynamic models were developed to simulate the spinup/400-N main engine burn/spindown maneuvers for the critical events of Jupiter Orbit Insertion (JOI) and Perijove Raise Maneuver (PRM). The dynamic interaction among the spin thruster pulsing frequency science/magnetometer (SCI/MAG) boom flexible modes, and the propellant slosh modes were studied.

Galileo orbit insertion planetary spacecraft↗