Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Dynamic Linking of Upstream Energy and Freight Demands for Bio and Fossil Energy Pathways in the Global Change Analysis Model

Comprehensive study of the environmental impacts associated with demand for an energy resource or carrier in any one sector requires a full consideration of the direct and indirect impacts on the rest of the regional and global energy system. It is important to consider the energy that is consumed in producing primary energy resources and energy consumed in transporting these energy resources internationally and domestically in order to produce a complete picture of these impacts. Biofuels are especially complex since they have feedbacks not just to the energy system but also to regional and global crop markets. Different modeling and analysis strategies have been applied to consider these impacts, which occur “upstream” of final energy consumption, with some success. Traditional life cycle models allow for rich technological detail in linking upstream impacts of energy demand with downstream final consumption; however, they cannot by themselves represent dynamic economic feedbacks across multiple sectors and regions over time. Computable general equilibrium (CGE) modeling does account for economic feedback among all sectors and regions; however, CGE modeling does not lend itself to physical representation of technological detail. Partial equilibrium (PE) modeling is a heterogeneous category describing economic models that focus on a subset of the economy, and they differ in coverage and ease in incorporating more sectors and economic links. In this study, we present a strategy for dynamically including the direct and indirect impacts of energy demand with physical and technology detail by explicitly adding these upstream energy and transportation links to GCAM, a PE model of global energy, land use, and emissions. We incorporate the following inter-sectoral linkages: energy inputs to crop production, energy inputs to fossil resource production, and freight transport requirements of energy and agricultural commodities. We assess the implications of explicitly including these links by measuring the global impacts of increased corn ethanol demand in the United States with and without these links included. Although the net global impact of the upstream links on energy and emissions are relatively modest in the scenarios we studied, the inclusion of these links illustrates interesting trade-offs in energy and transportation demand among fossil fuel and agriculture sectors. These sectoral interactions suggest that this level of modeling detail could be important in evaluating future analytical questions.

Sampedro Martinez de Estivariz, Jon↗

Future impacts of ozone driven damages on agricultural systems

Current ozone (O 3 ) concentration levels entail significant damages in crop yields around the world. The reaction of the emitted precursors (mostly methane and nitrogen oxides) with solar radiation contribute to O 3 levels that exceed established thresholds for crop damage. This paper shows current and projected (up to 2080) relative yield losses (RYLs) driven by O 3 exposure for different crops and the associated economic damages applying dynamic crop production and prices that are calculated per region and period. We adjust future crop yields in the Global Change Assessment Model (GCAM) to reflect the RYLs and analyze the effects on agricultural markets. We find that the changes (generally reductions) in O 3 precursor emissions in a reference scenario would reduce the agricultural damages, compared to present, for most of the regions, with a few exceptions including India, where higher future O3 concentrations have large negative impacts on crop yields. The annual economic impact of O3 driven losses from 2010-2080 are, in billion US dollars at 2015 prices ($B), 5.0-6.0, 9.8-18.8, 6.7-10.6 and 10.4-12.5 for corn, soybeans, rice and wheat, respectively, with the large losses for wheat and soybeans driven by their comparatively high responses to O 3 . When O 3 effects are explicitly modelled as exogenous yield shocks in future periods, there is a direct impact in future agricultural markets. Therefore, the aggregated net present value (NPV) of crop production would be reduced around by $90.8B at a global level. However, these changes are not distributed evenly across regions, and the net present market value of the crops would increase by up to $118.2B (India) or decrease by up to $59.2B (China).

54 ENVIRONMENTAL SCIENCES↗

Structural analysis of substrate recognition by glucose isomerase in Mn2+ binding mode at M2 site in S. rubiginosus

Highlights: • A snapshot of metal binding at the SruGI M2 site in the presence of Mn{sup 2+}. • Metal binding at the M2 site elicits a configuration change at the M1 site. • Glucose molecule can only bind to the M1 site in presence of Mn{sup 2+} at the M2 site. • Two-step sequential process for SruGI substrate recognition, in Mn{sup 2+} at M2 site mode. Glucose isomerase (GI) catalyzes the reversible enzymatic isomerization of d-glucose and d-xylose to d-fructose and d-xylulose, respectively. This is one of the most important enzymes in the production of high-fructose corn syrup (HFCS) and biofuel. We recently determined the crystal structure of GI from S. rubiginosus (SruGI) complexed with a xylitol inhibitor in one metal binding mode. Although we assessed inhibitor binding at the M1 site, the metal binding at the M2 site and the substrate recognition mechanism for SruGI remains the unclear. Here, we report the crystal structure of the two metal binding modes of SruGI and its complex with glucose. This study provides a snapshot of metal binding at the SruGI M2 site in the presence of Mn{sup 2+}, but not in the presence of Mg{sup 2+}. Metal binding at the M2 site elicits a configuration change at the M1 site. Glucose molecule can only bind to the M1 site in presence of Mn{sup 2+} at the M2 site. Glucose and Mn{sup 2+} at the M2 site were bridged by water molecules using a hydrogen bonding network. The metal binding geometry of the M2 site indicates a distorted octahedral coordination with an angle of 55–110°, whereas the M1 site has a relatively stable octahedral coordination with an angle of 85–95°. We suggest a two-step sequential process for SruGI substrate recognition, in Mn{sup 2+} binding mode, at the M2 site. Our results provide a better understanding of the molecular role of the M2 site in GI substrate recognition.

60 APPLIED LIFE SCIENCES↗

Interactions between U.S. biofuels policy and the Endangered Species Act

The Renewable Fuel Standard (RFS) is the primary policy governing the use of biofuels in the United States. Following the 2007 enactment of the RFS, there has been substantial expansion in the use of cropland to produce biofuel feedstocks, including corn and soybeans. Both the conversion of land and the ongoing cultivation of these crops can, depending on management practices, lead to negative environmental outcomes including degraded water quality, increased water use, increased greenhouse gas emissions, and loss or degradation of wildlife habitat. These outcomes have the potential to affect threatened and endangered species protected under the U.S. Endangered Species Act (ESA). The ESA requires federal agencies to consult with the U.S. Fish and Wildlife Service or the National Marine Fisheries Service to ensure that an agency's actions are not likely to jeopardize the existence of imperiled species, nor result in the destruction or adverse modification of their habitat. However, formal consultation has not yet been completed between the U.S. Environmental Protection Agency—the agency charged with implementing the RFS—and the wildlife services, thereby hindering mitigation or remediation of potential impacts. This analysis explores the likely effects of the RFS on land use changes and critical habitat, illustrates example pathways by which threatened and endangered species may be affected, and proposes solutions to help redress this harm. The findings suggest a need for further consultation and assessment of the interactions between the RFS and ESA as well as additional research to support the species-conservation and policymaking processes.

09 BIOMASS FUELS↗

Multifunctional landscapes: Site characterization and field-scale design to incorporate biomass production into an agricultural system

Current and future demand for food, feed, fiber, and energy require novel approaches to land management, which demands that multifunctional landscapes are created to integrate various ecosystem functions into a sustainable land use. We developed an approach to design such landscapes at a field scale to minimize concerns of land use change, water quality, and greenhouse gas emissions associated with production of food and bioenergy. This study leverages concepts of nutrient recovery and phytoremediation to place bioenergy crops on the landscape to recover nutrients released to watersheds by commodity crops. Crop placement is determined by evaluating spatial variability of: 1) soils, 2) surface flow pathways, 3) shallow groundwater flow gradients, 4) subsurface nitrate concentrations, and 5) primary crop yield. A 0.8 ha bioenergy buffer was designed within a 6.5 ha field to intercept concentrated surface flow, capture and use nitrate leachate, and minimize use of productive areas. Denitrification-Decomposition (DNDC) simulations show that on average, a switchgrass (Panicum Virgatum L.) or willow (Salix spp.) buffer within this catchment according to this design could reduce annual leached NO3 by 61 or 59% and N2O emission by 5.5 or 10.8%, respectively, produce 8.7 or 9.7 Mg ha-1 of biomass respectively, and displace 6.7 Mg ha-1 of corn (Zea mays L.) grain. Therefore, placement of bioenergy crops has the potential to increase environmental sustainability when the pairing of location and crop type result in minimal disruption of current food production systems and provides additional environmental benefits.

09 BIOMASS FUELS↗

Can upstream biofuel production increase the flow of downstream ecosystem goods and services?

Here, advanced biomass feedstocks tend to provide more non-fuel ecosystem goods and services (ES) than 1st-generation alternatives. We explore the idea that payment for non-fuel ES could facilitate market penetration of advanced biofuels by closing the profitability gap. As a specific example, we discuss the Mississippi-Atchafalaya River Basin (MARB), where 1st-generation bioenergy feedstocks (e.g., corn-grain) have been integrated into the agricultural landscape. Downstream, the MARB drains to the Gulf of Mexico, where the most-valuable fishery in the US is impacted by annual formation of a large hypoxic “Dead zone.” We suggest that advanced biomass production systems in the MARB can increase and stabilize the provision of ES derived from the coastal and marine ecosystems of the Gulf-of-Mexico. Upstream, we suggest that choosing feedstocks based on their resistance or resilience to disturbance (e.g., perennials, diverse feedstocks) can increase reliability in ES provision over time. Direct feedbacks to incentivize producers of advanced feedstocks are currently lacking. Perhaps a shift from first-generation biofuels to perennial-based fuels and other advanced bioenergy systems (e.g., algal diesel, biogas from animal wastes) can be encouraged by bringing downstream environmental externalities into the market for upstream producers. In future, we can create such feedbacks through payments for ES, but significant research is needed to pave the way.

09 BIOMASS FUELS↗

Expression of the Trichoderma reesei expansin-like protein, swollenin, in poplar results in biomass with improved sugar release by enzymatic hydrolysis

Ethanol production from lignocellulosic biomass has been considered an alternative to corn-based ethanol and fossil fuel. However, the secondary cell wall structure prevents efficient degradation of cellulose. Expression of cell wall degrading enzymes has been suggested as one solution to generate suitable feedstocks for lignocellulosic ethanol production. Swollenin (SWO), originating from Trichoderma reesei, disrupts cellulose structure with low-level hydrolytic activity to the glucan chain. Previously, characterization of T. reesei SWO has been carried out in multiple microorganisms and tobacco. This study heterologously overexpressed T. reesei SWO in hybrid poplar (Populus tremula × alba), a promising feedstock for biofuel production, under the control of either the constitutive Cauliflower Mosaic Virus 35S (CaMV 35S) promoter or the putative vascular tissue specific Subterranean Clover Stunt Virus S7 (SCSV) promoter. Transgenic poplar lines with high or moderate SWO expression level showed abnormal growth and reduced biomass production, along with increased glucose and reduced lignin contents. Increased cellulose crystallinity was observed in two transgenic events. This study also investigated the effect of in planta SWO expression on cellulose saccharification efficiency and found that transgenic events improved glucan conversion rates compared to wild type poplar. The results suggest SWO-overexpressing transgenic poplar lines could be a potential feedstock for ethanol production.

09 BIOMASS FUELS↗

Sustainability assessment of alternative jet fuel for the U.S. Department of Defense

The United States Department of Defense (DoD) is considering replacing the 2.8 billion gallons of petroleum jet fuel consumed within the continental United States (CONUS) annually with alternative jet fuels to reduce vulnerability to price and supply fluctuations and improve sustainability. We evaluate the feasibility of replacing DoD CONUS jet fuel with alternative jet fuel from domestic feedstocks and assess the cost, greenhouse gas (GHG) emissions, energy balance, land, water, and fertilizer impacts of nine alternative jet fuel pathways. The feedstocks include terrestrial crops (soy, corn, wood, and grass), marine microalgae, and by-products (forestry residue, municipal solid waste, and waste oil) converted by extraction, fermentation, or thermo-chemical conversion, paired with upgrading steps. We found that domestic biomass feedstocks can meet the DoD CONUS jet fuel demand without significantly affecting food supply. Alternative pathways cost more than petroleum jet fuel ($0.78 l -1 and emitting 89 g CO 2 equivalent (CO 2e ) MJ -1 ), but many lowered GHG emissions. The forestry residue and waste oil pathways yielded the lowest costs ($\$0.92$ and $\$0.82$ l -1 , respectively), decreased emissions (23 and 35 g CO 2 e MJ -1 , respectively), and had negligible effects on land, water, and fertilizer resources. Finally, tradeoffs among sustainability metrics are further explored with a sensitivity analysis and by evaluating carbon-cost scenarios.

09 BIOMASS FUELS↗

Effect of digestate and digestate supplemented with biochar on switchgrass growth and chemical composition

Digestate, a by-product of anaerobic digestion, can be an excellent source of nutrients for bioenergy crop production, while biochar, resulting from pyrolyzing biomass, can valorize the nutrients of digestate. The objective of this study was to evaluate the nutritional value of digestate and digestate + biochar for switchgrass production. The greenhouse experiment was conducted to determine the effects of a nitrogen (N) source including 0 N (control), urea (nutrient control), sewage sludge digestate, and sewage sludge digestate + corn stover biochar on switchgrass growth and feedstock composition. Nitrogen sources were observed to significantly increase plant weight at the 32-week harvest, with weight ranging from 94.2 to 125.2 g plant -1 , depending on the N source, compared to 70.7 g plant -1 from the negative control. Moreover, switchgrass treated with digestate + biochar showed higher plant weight than samples treated only with digestate. Nitrogen application of urea, digestate, and digestate + biochar had positive effects on plant height and total leaf area in the 32-week harvests and chlorophyll content in the 8-week harvests. Feedstock quality traits including hemicellulose, cellulose, and lignin content were not affected by N sources in either the 8 or 32-week harvests with the exception of ash concentration in the 32-week harvests. Our results indicate that digestate and digestate + biochar can be a potential substitute for chemical fertilizer, resulting in increased biomass yield.

09 BIOMASS FUELS↗

Two-stage dilute-acid and organic-solvent lignocellulosic pretreatment for enhanced bioprocessing

A two stage pretreatment approach for biomass is developed in the current work in which dilute acid (DA) pretreatment is followed by a solvent based pretreatment (N-methyl morpholine N oxide -- NMMO). When the combined pretreatment (DAWNT) is applied to sugarcane bagasse and corn stover, the rates of hydrolysis and overall yields (>90%) are seen to dramatically improve and under certain conditions 48 h can be taken off the time of hydrolysis with the additional NMMO step to reach similar conversions. DAWNT shows a 2-fold increase in characteristic rates and also fractionates different components of biomass -- DA treatment removes the hemicellulose while the remaining cellulose is broken down by enzymatic hydrolysis after NMMO treatment to simple sugars. The remaining residual solid is high purity lignin. Lastly, future work will focus on developing a full scale economic analysis of DAWNT for use in biomass fractionation.

09 BIOMASS FUELS↗

A combination of deep eutectic solvent and ethanol pretreatment for synergistic delignification and enhanced enzymatic hydrolysis for biorefinary process

Here, a novel pretreatment system containing deep eutectic solvents and ethanol (DES-E) for synergistic carbohydrate conversion and delignification was reported in this study. The DES-E pretreatment resulted in an enhanced glucose yield compared to individual DES and ethanol pretreatment for the three tested biomass, including Broussonetia papyrifera, corn stover and pine. To further explore the delignification mechanism, the solubilized lignin and residual lignin from Broussonetia papyrifera was recovered and extracted, then thoroughly characterized. The highest total OH content was found in the DES-E solubilized lignin, which could be used as antioxidant. The presence of ethanol in pretreatment liquor could protect the β-O-4 substructure from breakage and reduce lignin condensation, which favors the subsequent enzymatic hydrolysis. Comparable glucose yield and delignification performance was achieved by recycled DES. DES-E pretreatment offers a promising method for lignin isolation and cellulose digestibility improvement simultaneously.

09 BIOMASS FUELS↗

Host analysis-guided selection and targeted engineering (HASTE) of Lipomyces tetrasporus for the conversion of CO2-derived feedstocks

Efficient and cost-competitive bioproduction calls for utilizing CO2-derived feedstocks, such as products from electro-reduction of CO2 and hydrolysate from lignocellulosic biomass. However, efficiently using all their carbon components, including acetate, glucose, and xylose, remains a challenge. Here, we characterize Lipomyces tetrasporus, a novel, robust yeast strain capable of effectively assimilating these carbon sources. We used an integrated systems biology approach combining ¹³C metabolic flux analysis, dynamic labeling experiments, and RNA sequencing. We conducted the first metabolic flux analysis for glucose, xylose, and acetate catabolism in this species. Dynamic labeling revealed a highly active TCA cycle during acetate metabolism, evidenced by rapid citrate and malate accumulation. The strain demonstrated strong NADH/NADPH production and acetyl-CoA synthase activity. Using insights and gene targets from this analysis, we engineered L. tetrasporus for malate production. The engineered strain produced 7.5 g/L malic acid (0.25 g/g yield) in shake flasks with glucose-acetate media and 28.8 g/L malic acid at a yield of 0.20 g/g in fed-batch mode with corn-stover hydrolysate. Together, these insights and rational strain engineering establish L. tetrasporus as a versatile, Crabtree-negative platform that is an energy-CO2-bioproduction nexus for channeling CO2 carbon into value-added bioproducts.

Xiao, Zhengyang↗

The role of catalytic iron in enhancing volumetric sugar productivity during autothermal pyrolysis of woody biomass

Passivation of naturally occurring AAEM in biomass enhances sugar yields from the fast pyrolysis of biomass by preventing these metals from catalyzing the fragmentation of pyranose rings in cellulose and hemicellulose. However, because AAEM also catalyzes lignin depolymerization, its passivation can be accompanied by undesirable char agglomeration. Pretreatment of biomass with ferrous sulfate both passivates AAEM and substitutes ferrous ions as lignin depolymerization catalysts. This pretreatment has been particularly successful for high ash biomass like corn stover, but of limited value for low ash biomass like wood. This study explores the reasons for this discrepancy and offers a combined pretreatment of ferrous sulfate and ferrous acetate pretreatment to overcome char agglomeration in wood. Furthermore, this new pretreatment increased sugar yields from 4.4 wt% to 15.5 wt% and 5.4 wt% to 19.0 wt% for hardwood and softwood biomasses, respectively. This pretreatment produces an iron-rich biochar that catalyzes oxidation of the biochar under the oxygen-rich conditions of autothermal pyrolysis, which is preferentially consumed to provide the enthalpy for pyrolysis, preserving bio-oil as a more desirable energy product. Instead of producing carbon monoxide, which dominates oxidation of biochar from untreated biomass, the iron catalyzes oxidation to carbon dioxide, producing more energy per mole of oxygen consumed. In fact, oxygen demand to support autothermal pyrolysis of red oak and southern yellow pine was reduced 15% by the presence of iron in the biochar.

42 ENGINEERING↗

Agent-based modeling to evaluate the effects of harvesting biomass and hunting on ring-necked pheasant ( Phasianus colchicus ) populations

As the US strives to divest from fossil fuels, dedicated energy crops have increased in popularity because of their potential to serve as a renewable source of transportation fuel and biomass-generated electricity. Whereas the impacts of crop agriculture on biodiversity have been well-documented, less is known about the potential impacts that growing bioenergy crops could have on wildlife. Here we look specifically at the ring-necked pheasant (Phasianus colchicus) and how pheasant populations may be influenced by growing and harvesting bioenergy crops. We explored effects of temporal harvest strategies at the field scale on biomass yield and pheasant population size. To investigate, we developed an agent-based model (ABM) that simulates ring-necked pheasants, tractors, hunters, and vegetation classes. One such vegetation class is land that is enrolled in a Conservation Reserve Program (CRP) plan specifically targeting pheasant conservation. Using this ABM, we assessed four different landscapes—corn-dominated, CRP-dominated, grassland-dominated, and mixed landscape—under strategies that varied the time of harvest. We also used ecological valuation to compare scenario outcomes from an economic perspective. We determined that biomass yield and pheasant population size were sensitive to harvesting times. Our scenarios totaled between ~$931,000 (minimum) and $3.8 million (maximum) over all landscapes, though on average harvesting in late spring generated the most value ($2.45 million) and harvesting in fall was a close second in terms of profitability ($2.39 million).

59 BASIC BIOLOGICAL SCIENCES↗

Biomass char gasification kinetic rates compared to data, including ash effects

This investigation provides both experimental and theoretical analyses of biomass char gasification kinetics over 1150–1350 °C in the environment of CO 2 , H 2 O and combinations of these reactants. The experimental data include continuous measurements of particle mass, external and internal temperatures, shape, and size with periodic but not continuous measurements of char porosity, pore size distribution, and pore surface area. The model describes heterogeneous char gasification for poplar wood, corn stover and switchgrass in different shapes and industrially relevant sizes (12.5 mm and smaller). Nonlinear least-squares regression produces optimized power-law model parameters for global kinetics that describe biomass char gasification with respect to both CO 2 and H 2 O separately and in combination. A single set of kinetic parameters describes reaction rates for all three fuels. Model simulations agree with measured data at all stages of char conversion even though the observed mass loss rates change significantly with conversion. In conclusion, the change in rate with conversion depends strongly on ash content, and this investigation provides a simple and theoretically based reaction rate expression that includes the effect of inert ash occupying an increasing portion of the reactive surface with increased conversion.

09 BIOMASS FUELS↗

Estimated attribution of the RFS program on soybean biodiesel in the U.S. using the bioenergy scenario model

Biofuels are supported by various governmental policies in the U.S. and globally as an alternative transportation fuel for environmental, geopolitical, and economic reasons. Much debate surrounds the effectiveness of these policies as well as the overall net environmental effect of increased biofuels use. In the U.S., recent studies have shown that the Renewable Fuels Standard (RFS) Program, overall, may not have been the leading driver of the ethanol industry from 2005 to 2020, contrary to common perception. Similar scrutiny has not been applied to biodiesel. Here, this study uses the Bioenergy Scenario Model, a well-vetted system dynamics model, to retrospectively apportion historical biodiesel production between the RFS Program and other potentially influential drivers, such as the economics of biodiesel vs. diesel, the Biodiesel Tax Credit (BTC), California's Low Carbon Fuel Standard, and other factors. From 2002 to 2020 about 36% of biodiesel production can be attributed to the RFS Program, 35% to the BTC, and the rest to other factors. Thus, the overall effect of the RFS Program appears much larger on biodiesel than on corn ethanol. The finding that the same policy may have very disparate effects on different biofuels helps inform the design of future policies on biofuels.

09 BIOMASS FUELS↗

Using landscape typologies to model socioecological systems: Application to agriculture of the United States Gulf Coast

Agricultural enterprises are vulnerable to the effects of climate variability and change. Improved understanding of the determinants of vulnerability and adaptive capacity in agricultural systems is important for projecting and managing future climate risk. At present, three analytical tools dominate methodological approaches to understanding agroecological vulnerability to climate: process-based crop models, empirical crop models, and integrated assessment models. A common weakness of these approaches is their limited treatment of socio-economic conditions and human agency in modeling agroecological processes and outcomes. This study proposes a framework that uses spatial cluster analysis to generate regional socioecological typologies that capture geographic variance in regional agricultural production and enable attribution of that variance to climatic, topographic, edaphic, and socioeconomic components. This framework was applied to historical corn production (1986-2010) in the U.S. Gulf of Mexico region as a testbed. The results demonstrate that regional socioeconomic heterogeneity is an important driving force in human dominated ecosystems, which we hypothesize, is a function of the link between socioeconomic conditions and the adaptive capacity of agricultural systems. Meaningful representation of future agricultural responses to climate variability and change is contingent upon understanding interactions among biophysical conditions, socioeconomic conditions, and human agency their incorporation in predictive models.

58 GEOSCIENCES↗