Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Photon noise and constant-volume operators

In a previous paper, a class of constant volume (CV) operators designed to maximize spatial resolution in the presence of photon noise was introduced. In this paper, the statistical properties are derived of the output images created by CV operators applied to photon-noisy versions of input images consisting of edges, spots, and gratings. The results are used to calculate the input image parameters that would permit any test image to be discriminated from a uniform field with a given level of reliability and consequently to compare the predictions of a CV operator model with psychophysical data. These results also allow the potential usefulness of CV operators in artificial image processing applications to be assessed.

Yellott, John I., Jr.↗

An exactly solvable model for calculating critical misfit and thickness in epitaxial superlattices. II - Layers of unequal elastic constants and thicknesses

The theoretical model developed by van der Merwe and Jesser (1988) is extended to permit the exact determination of the critical misfit and critical thickness of an epitaxially grown superlattice made up of layers with differing elastic constants and thicknesses. Lateral force balances are maintained by means of an explicit relationship between the homogeneous misfit strains and the thicknesses and moduli. A number of simplifying approximations are introduced, and sample numerical results are presented in graphs.

Jesser, W. A.↗

Evaluation of the constant pressure panel method (CPM) for unsteady air loads prediction

This paper evaluates the capability of the constant pressure panel method (CPM) code to predict unsteady aerodynamic pressures, lift and moment distributions, and generalized forces for general wing-body configurations in supersonic flow. Stability derivatives are computed and correlated for the X-29 and an Oblique Wing Research Aircraft, and a flutter analysis is carried out for a wing wind tunnel test example. Most results are shown to correlate well with test or published data. Although the emphasis of this paper is on evaluation, an improvement in the CPM code's handling of intersecting lifting surfaces is briefly discussed. An attractive feature of the CPM code is that it shares the basic data requirements and computational arrangements of the doublet lattice method. A unified code to predict unsteady subsonic or supersonic airloads is therefore possible.

Appa, Kari↗

Constant-frequency, clamped-mode resonant converters

Two novel clamped-mode resonant converters are proposed which operate at a constant frequency while retaining many desired features of conventional series- and parallel-resonant converters. State-plane analysis techniques are used to identify all possible operating modes and define their mode boundaries. Control-to-output characteristics are derived that specify the regions for natural and forced commutation. The predicted operating modes are verified using a prototype circuit.

Tsai, Fu-Sheng↗

Measurement of electron-attachment line shapes, cross sections, and rate constants in HI and DI at ultralow electron energies

Electron-attachment cross sections are reported in the electron energy range 0-150 MeV, at an energy resolution of 6.5 MeV (full width at half maximum) for the molecules HI and DI. Use is made of the Kr photoionization method to obtain cross sections for HI, and a signal intercomparison technique to obtain cross sections and the thermal-attachment rate constant for DI. Attachment properties of the two molecules are very similar. The ratio of attachment cross sections is discussed in terms of the reduced-mass dependence of the dissociation width and the survival probability, and in terms of spectroscopic thresholds and rotational populations for attachment at 300 K. Approximate potential-energy curves for the lowest states of the neutral molecule and negative ion are given.

Alajajian, S. H.↗

Magnetic clouds and force-free fields with constant alpha

Magnetic clouds observed at 1 AU are modeled as cylindrically symmetric, constant alpha force-free magnetic fields. The model satisfactorily explains the types of variations of the magnetic field direction that are observed as a magnetic cloud moves past a spacecraft in terms of the possible orientations of the axis of a magnetic cloud. The model also explains why the magnetic field strength is observed to be higher inside a magnetic cloud than near its boundaries. However, the model predicts that the magnetic field strength profile should be symmetric with respect to the axis of the magnetic cloud, whereas observations show that this is not generally the case.

Burlaga, L. F.↗

Calculations of rate constants for the three-body recombination of H2 in the presence of H2

A new global potential energy hypersurface for H2 + H2 is constructed and quasiclassical trajectory calculations performed using the resonance complex theory and energy transfer mechanism to estimate the rate of three body recombination over the temperature range 100 to 5000 K. The new potential is a faithful representation of ab initio electron structure calculations, is unchanged under the operation of exchanging H atoms, and reproduces the accurate H3 potential as one H atom is pulled away. Included in the fitting procedure are geometries expected to be important when one H2 is near or above the dissociation limit. The dynamics calculations explicitly include the motion of all four atoms and are performed efficiently using a vectorized variable-stepsize integrator. The predicted rate constants are approximately a factor of two smaller than experimental estimates over a broad temperature range.

Schwenke, David W.↗

Calculation of Weibull strength parameters and Batdorf flow-density constants for volume- and surface-flaw-induced fracture in ceramics

The calculation of shape and scale parameters of the two-parameter Weibull distribution is described using the least-squares analysis and maximum likelihood methods for volume- and surface-flaw-induced fracture in ceramics with complete and censored samples. Detailed procedures are given for evaluating 90 percent confidence intervals for maximum likelihood estimates of shape and scale parameters, the unbiased estimates of the shape parameters, and the Weibull mean values and corresponding standard deviations. Furthermore, the necessary steps are described for detecting outliers and for calculating the Kolmogorov-Smirnov and the Anderson-Darling goodness-of-fit statistics and 90 percent confidence bands about the Weibull distribution. It also shows how to calculate the Batdorf flaw-density constants by uing the Weibull distribution statistical parameters. The techniques described were verified with several example problems, from the open literature, and were coded. The techniques described were verified with several example problems from the open literature, and were coded in the Structural Ceramics Analysis and Reliability Evaluation (SCARE) design program.

Pai, Shantaram S.↗

Airfoil stall penetration at constant pitch rate and high Reynolds number

The model wing consists of a set of fiberglass panels mounted on a steel spar that spans the 8 ft test section of the UTRC Large Subsonic Wind Tunnel. The first use of this system was to measure surface pressures and flow conditions for a series of constant pitch rate ramps and sinusoidal oscillations a Mach number range, a Reynolds number range, and a pitch angle range. It is concluded that an increased pitch rate causes stall events to be delayed, strengthening of the stall vortex, increase in vortex propagation, and increase in unsteady airloads. The Mach number range causes a supersonic zone near the leading edge, stall vortex to be weaker, and a reduction of unsteady airloads.

Lorber, Peter F.↗

Optimal error analysis of spectral methods with emphasis on non-constant coefficients and deformed geometries

The numerical analysis of spectral methods when non-constant coefficients appear in the equation, either due to the original statement of the equations or to take into account the deformed geometry, is presented. Particular attention is devoted to the optimality of the discretization even for low values of the discretization parameter. The effect of some overintegration is also addressed, in order to possibly improve the accuracy of the discretization.

Maday, Yvon↗

Ellipsometric method for the measurement of temperature and optical constants of incandescent transition metals

The development of a unique noncontact temperature measurement device utilizing rotating analyzer ellipsometry is described. The technique circumvents the necessity of spectral emissivity estimation by direct measurement concomitant with radiance brightness. Simultaneous determinations of dielectric constants and refractive indices allow changes in the physical and chemical state of a heated surface to be monitored. The results of optical property measurements at 633 nm as functions of temperature between 1000 and 2500 K for eight transition metals including Hf, Ir, Mo, Nb, Pd, Pt, Ta, and V are presented together with preliminary results of oxidation studies on iridium.

Hansen, George P.↗

Theoretical spectroscopic constants for the low-lying states of the oxides and sulfides of Mo and Tc

Spectroscopic results were determined for the ground and low-lying states of the oxides and sulfides of Mo and Tc, using the single-reference-based modified coupled pair functional method of Ahlrichs et al. (1985) and Chong et al. (1986) and the multireference-based state-averaged CASSCF/MRCI method. Spectroscopic constants, dipole moments, Mulliken populations, and radiative lifetimes were calculated for selected low-lying states of these molecular systems. The spectroscopy of the MoS and TcS molecules was found to be quite analogous to the corresponding oxides.

Langhoff, Stephen R.↗

Ballast system for maintaining constant pressure in a glove box

A ballast system is disclosed for a glove box including a fixed platform on which is mounted an inflatable bag on top of which resides a cover and a weight. The variable gas volume of the inflatable bag communicates with that of the glove box via a valved tube. The weight and the gas volume are selected to maintain a relatively constant pressure in the glove box despite variations in the glove box volume while avoiding the use of complicated valving apparatus.

Shlichta, Paul J.↗

Spectral emissivities and optical constants of electromagnetically levitated liquid metals as functions of temperature and wavelength

The development of a noncontact temperature measurement device utilizing rotating analyzer ellipsometry is described. The technique circumvents the necessity of spectral emissivity estimation by direct measurement concomittant with radiance brightness. Using this approach, the optical properties of electromagnetically levitated liquid metals Cu, Ag, Au, Ni, Pd, Pt, and Zr were measured in situ at four wavelengths and up to 600 K superheat in the liquid. The data suggest an increase in the emissivity of the liquid compared with the incandescent solid. The data also show moderate temperature dependence of the spectral emissivity. A few measurements of the optical properties of undercooled liquid metals were also conducted. The data for both solids and liquids show excellent agreement with available values in the literature for the spectral emissivities as well as the optical constants.

Krishnan, S.↗

Computer codes for the evaluation of thermodynamic properties, transport properties, and equilibrium constants of an 11-species air model

The computer codes developed provide data to 30000 K for the thermodynamic and transport properties of individual species and reaction rates for the prominent reactions occurring in an 11-species nonequilibrium air model. These properties and the reaction-rate data are computed through the use of curve-fit relations which are functions of temperature (and number density for the equilibrium constant). The curve fits were made using the most accurate data believed available. A detailed review and discussion of the sources and accuracy of the curve-fitted data used herein are given in NASA RP 1232.

Thompson, Richard A.↗

Process for lowering the dielectric constant of polyimides using diamic acid additives

Linear aromatic polyimides with low dielectric constants are produced by adding a diamic acid additive to the polyamic acid resin formed by the condensation of an aromatic dianhydride with an aromatic diamine. The resulting modified polyimide is a better electrical insulator than state-of-the-art commercially available polyimides.

Stoakley, Diane M.↗

Observed solar near UV variability: A contribution to variations of the solar constant

Continuous Measurements of the Solar UV have been made by an instrument on the Solar Mesosphere Explorer (SME) since October 1981. The results for the wavelength interval 200 to 300 nm show an irradiance decrease to a minimum in early 1987 and a subsequent increase to mid-April 1989. The observed UV changes during part of solar cycles 21 to 22 represent approx. 35 percent (during the decreasing phase) and 25 percent (during the increasing phase) of the observed variations of the solar constant for the same time period as the SME measurements.

London, Julius↗

Reflection and trapping of transient Alfven waves propagating in an isothermal atmosphere with constant gravity and uniform magnetic field

A time-dependent linear magnetohydrodynamic numerical model was used to investigate the propagation of Alfven waves in an isothermal and stratified atmosphere with constant gravity and uniform vertical magnetic field. Results show that the Alfven wave transit time for the wave source to infinity is finite and that the wave exhibits continuous partial reflection which becomes total reflection as the front approaches infinity. The total reflection causes the waves to be trapped in the cavity that extends from the wave source to infinity and in which the wave energy is stored. The results suggest that the reflection of Alfven waves (of sufficiently long period) from the outer corona is an intrinsic phenomenon for any stellar atmosphere stratified by gravity and an open magnetic field, and that, therefore, such waves may be trapped in the stellar atmosphere.

An, C.-H.↗