Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Effect of temperature on the electronic instability and the crystalline phase change at low temperature of V3Si type compounds

Equations assuming a Jahn-Teller type effect for the d band electrons in V3Si compounds are given, and the results of free-energy change calculations by using some approximations based on these equations are depicted. The tetragonal structure is converted to cubic as the temperature rises past T sub m which is calculated as 13 K. by the Batterman-Barrett method and is measured to be 20-5 K. Other parameters such as change of C sub p with temperature are predicted better.

Labbe, J.↗
NASA NTRS1978

Effect of hydraulic fluid (MIL-H-83282) on selected commercial O-ring compounds

Acrylonitrile and fluorocarbon compounds were evaluated at various temperatures and time intervals in samples of the fluid obtained from three qualified suppliers. It was concluded that both polymers can function in hydraulic fluids within the conditions defined by this study. Hydraulic fluid from each manufacturer was similar in its effect upon each given O-ring material, with one exception. Similarly, there were no striking differences in the resistance of O-rings of the same generic rubber type when provided by the different manufacturers.

Wood, T. E.↗
NASA NTRS1978

Flow visualization of film cooling with spanwise injection from a small array of holes and compound-angle injection from a large array

Film injection from discrete holes in a smooth, flat plate was studied for two configurations: (1) spanwise injection through a four hole staggered array; and (2) compound angle injection through a 49 hole staggered array. The ratio of boundary layer thicknesses to hole diameter and the Reynolds number were typical of gas turbine film cooling applications. Streaklines showing the motion of the injected air were obtained by photographing small, neutrally buoyant, helium-filled soap bubbles that followed the flow field.

Russell, L. M.↗
NASA NTRS1978

The friction and wear properties of sputtered hard refractory compounds

Several refractory silicide, boride, and carbide coatings were examined. The coatings were applied to type 440C steel surfaces by radio-frequency sputtering. The friction and wear properties of the coatings were found to be related to stoichiometry and impurity content of the bulk coating as well as the degree of interfacial adherence between coating and substrate. Bulk coating stoichiometry could to a large extent be controlled by the application of a negative bias voltage during deposition. Adherence was promoted by the formation of an oxidized layer at the interface. Deliberate preoxidizing of the 440C produced enhanced adherence for many compounds which are related to the formation of a mixed oxide transition region.

Brainard, W. A.↗
NASA NTRS1978

The room-temperature dissociation of the compound Au3Si

Three gold-18.6 at.% silicon specimens which were solidified by quenching from above the liquidus temperature have been reexamined after being stored at room temperature for about 8 years. It was found that the 'metastable' compound Au3Si formed on quenching had begun to dissociate by a surface nucleated, solid-state reaction. The reaction front had advanced about 0.2 mm from the surface, leaving a rim of dissociation products. These dissociation products were studied using optical and scanning electron microscopy, electron beam microprobe analysis and an X-ray micro-diffraction technique. It was concluded that the reaction produces elemental gold and silicon, as at higher reaction temperatures, but that the scale of dispersion is so extremely fine that the resulting microstructure cannot be resolved by scanning electron microscopy.

Bhattacharya, D.↗
NASA NTRS1978

Photocatalytic oxidation of organic compounds on Mars

Ultraviolet-stimulated catalytic oxidation is proposed as a mechanism for the destruction of organic compounds on Mars. The process involves the presence of gaseous oxygen, UV radiation, and a catalyst (titanium dioxide), and all three of these have been found to be present in the Martian environment. Therefore it seems plausible that UV-stimulated oxidation of organics is responsible for degrading organic molecules into inorganic end products.

Chun, S. F. S.↗
NASA NTRS1978

A kinetics investigation of several reactions involving chlorine containing compounds

The technique of flash photolysis-resonance fluorescence was utilized to study nine reactions of stratospheric importance. The tropospheric degradation reactions of seven halogenated hydrocarbons were studied to assess their possible influx into the stratosphere. There are reactions of either Cl, OH, or O(3P) species with hydrogenated species, O3 or chlorinated compounds. Apart from the kinetic measurements, the quantum yield for the production of O(1D) from O3 in the crucial wavelength region of 293 to 316.5 nm was studied by utilizing a narrow wavelength laser as the photolysis source. The product formation was monitored by measuring the fluorescence of NO2 formed through O(1D) reaction with N2O followed by NO reaction with O3 to give NO2.

Davis, D. D.↗
NASA NTRS1979

Method and device for the detection of phenol and related compounds

A method is described which permits the selective oxidation and potentiometric detection of phenol and related compounds in an electrochemical cell. An anode coated with a gel immobilized oxidative enzyme and a cathode are each placed in an electrolyte solution. The potential of the cell is measured by a potentiometer connected to the electrodes.

Schiller, J. G.↗
NASA NTRS1978

The friction and wear properties of sputtered hard refractory compounds

The friction and wear properties of several refractory silicides, borides, and carbide coatings were examined. The coatings were applied to type 440C steel surfaces by radio-frequency sputtering. The friction and wear properties of the coatings were found to be related to stoichiometry and impurity content of the bulk coating as well as the degree of interfacial adherence between coating and substrate. Bulk coating stoichiometry could to large extent be controlled by the application of a negative bias voltage during deposition. Adherence was promoted by the formation of an oxidized layer at the interface. Deliberate preoxidizing of the 440C produced enhanced adherence for many compounds which is related to the formation of a mixed oxide transition region.

Brainard, W. A.↗
NASA NTRS1980

Cryogenic container compound suspension strap

A support strap for use in a cryogenic storage vessel for supporting the inner shell from the outer shell with a minimum heat leak is presented. The compound suspension strap is made from a unidirectional fiberglass epoxy composite material with an ultimate tensile strength and fatigue strength which are approximately doubled when the material is cooled to a cryogenic temperature.

Vorreiter, J. W.↗
NASA NTRS1980

Phase transitions in the ordered compound TiAl and in alloys having it as a base

The combined effect of alloying and heat treatment on the order-disorder transition in TiAl of stoichiometric composition was investigated. It is concluded from the data obtained that the TiAl 1 to TiAl 2 transition is a phase transition of the second kind. A phase transition was observed in TiAl of equiatomic composition in the 450-550 C temperature range. The introduction of niobium into the ordered compound TiAl of stoichiometric composition, instead of titanium or aluminum atoms, leads to partial softening. In this case, the effect of niobium atoms on softening of the alloys was greater when the niobium was introduced in place of aluminum atoms.

Zelenkov, I. A.↗
NASA NTRS1980

Electroepitaxy of multicomponent systems - Ternary and quarternary compounds

A theoretical model is presented which accounts for the electroepitaxial growth kinetics and composition of multicomponent compounds in terms of mass transport in the liquid and phase diagram relationships. The mass transport in the interface is dominated by electromigration in the absence of convection and by diffusion in the presence of convection. The composition of the solid is controlled by the Peltier effect at the growth interface and by the diffusion and mobility constants of the solute components and the growth velocity (current density). Thus, for a given solution composition, the composition of the solid can be varied by varying the current density. For a given current density the composition remains constant even in the case of relatively thick epitaxial layers. All aspects of the model were found to be in good agreement with the growth and composition characteristics of Ga/x-1/Al/x/As layers.

Bryskiewicz, T.↗
NASA NTRS1979

Reduction of intensity variations on a photovoltaic array with compound parabolic concentrators

The reduction of nonuniformities in the intensity distribution of light focused on a photovoltaic array by a compound parabolic concentrator is investigated. The introduction of small distortions into the surfaces of the reflector in order to diffuse the incident collimated light to fill the angular acceptance of the concentrator is calculated by means of ray tracing to decrease the irradiance nonuniformity at the cost of a lowered effective concentration of the concentrator. Measurements of the intensity distribution on a scale test model in terrestrial sunlight with corrugated aluminized mylar reflectors are shown to be in good agreement with the ray tracing results. A two-stage concentrator consisting of a focusing primary and a nonimaging secondary is also shown to result in a fairly uniform intensity distribution except in the case of a 4-deg incidence angle, which may be corrected by the introduction of distortions into one or both concentration stages.

Greenman, P.↗
NASA NTRS1979

The photolytic degradation and oxidation of organic compounds under simulated Martian conditions

Cosmochemical considerations suggest various potential sources for the accumulation of organic matter on Mars. However the Viking Molecular Analysis did not indicate any indigenous organic compounds on the surface of Mars. Their disappearance from the top layer is most likely caused by the combined action of the high solar radiation flux and various oxidizing species in the Martian atmosphere and regolith. In this study the stability of several organic substances and a sample of the Murchison meteorite was tested under simulated Martian conditions. After adsorption on powdered quartz, samples of adenine, glycine and naphthalene were irradiated with UV light at various oxygen concentrations and exposure times. In the absence of oxygen, adenine and glycine appeared stable over the given irradiation period, whereas a definite loss was observed in the case of naphthalene, as well as in the volatilizable and pyrolizable content of the Murchison meteorite. The presence of oxygen during UV exposure caused a significant increase in the degradation rate of all samples. It is likely that similar processes have led to the destruction of organic materials on the surface of Mars.

Oro, J.↗
NASA NTRS1983

Theory of Compound Liquid Drops

Dynamic behavior is analyzed for drop within drop within infinite fluid. Report gives theoretical basis for understanding behavior of compound drops. Aids in planning and interpreting experiments in laboratory, spacecraft, and research aircraft. Provides insight into fabrication of target pellets for nuclear fusion.

Saffren, M. M.↗
NASA NTRS1981

Secondary and compound concentrators for parabolic dish solar thermal power systems

A secondary optical element may be added to a parabolic dish solar concentrator to increase the geometric concentration ratio attainable at a given intercept factor. This secondary may be a Fresnel lens or a mirror, such as a compound elliptic concentrator or a hyperbolic trumpet. At a fixed intercept factor, higher overall geometric concentration may be obtainable with a long focal length primary and a suitable secondary matched to it. Use of a secondary to increase the geometric concentration ratio is more likely to e worthwhile if the receiver temperature is high and if errors in the primary are large. Folding the optical path with a secondary may reduce cost by locating the receiver and power conversion equipment closer to the ground and by eliminating the heavy structure needed to support this equipment at the primary focus. Promising folded-path configurations include the Ritchey-Chretien and perhaps some three element geometries. Folding the optical path may be most useful in systems that provide process heat.

Jaffe, L. D.↗
NASA NTRS1982

Generation of a strong core centering force in a submillimeter compound droplet system

By amplitude-modulating the driving voltage of an acoustic levitating apparatus, a strong core centering force was generated in a submillimeter compound droplet system suspended by the radiation pressure in a gaseous medium. Depending on the acoustic characteristics of the droplet system, it was found that the technique can be utilized advantageously in the multiple-layer coating of an inertial confinement fusion pellet.

Lee, M. C.↗