Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytical performance models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Automated classification of big X-ray diffraction data using deep learning models

Abstract In current in situ X-ray diffraction (XRD) techniques, data generation surpasses human analytical capabilities, potentially leading to the loss of insights. Automated techniques require human intervention, and lack the performance and adaptability required for material exploration. Given the critical need for high-throughput automated XRD pattern analysis, we present a generalized deep learning model to classify a diverse set of materials’ crystal systems and space groups. In our approach, we generate training data with a holistic representation of patterns that emerge from varying experimental conditions and crystal properties. We also employ an expedited learning technique to refine our model’s expertise to experimental conditions. In addition, we optimize model architecture to elicit classification based on Bragg’s Law and use evaluation data to interpret our model’s decision-making. We evaluate our models using experimental data, materials unseen in training, and altered cubic crystals, where we observe state-of-the-art performance and even greater advances in space group classification.

Chemistry↗

The performance of measurement-based simple models for the x-band complex permittivity of 370 ohms/sq. Kapton XC

The X-band complex permittivity of a commercially-available, carbon loaded, polyamide film is measured. Simple though approximate models are obtained which are shown to be necessary and suitable for analytic or computational modeling of thin absorbing structures realized with the thin lossy film. The utility of each model is tested against experimental results for thin high-impedance surface (HIS) enhanced Salisbury absorbers, enhanced in the sense that the HIS augmented absorber is much thinner than a conventional Salisbury absorber. Kapton XC(reg.) is a commercially-available, carbon-loaded polyamide film manufactured by Dupont(reg.). Though these films are exceptionally durable and available in a range of surface resistivities, their effective permittivity is complex valued and, therefore, their sheet impedance is frequency dependent as is typical of carbon-loaded dielectrics. We have measured the X-band complex permittivity of Kapton XC(reg.) with a manufacture's quoted direct current (DC) sheet resistivity of approximately 370 {Omega}/sq. and thicknesses of 40.0 {mu}m. This study showed the need for relatively precise knowledge of the real part of a carbon particulate loaded, lossy thin film's permittivity in order to accurately engineer the reflection coefficient of high-impedance surface enhanced electromagnetic absorbers. Specifically, simple, approximate models can be obtained for the X-band complex pennittivity of commercially available, carbon loaded, 370 {Omega}/sq., Kapton XC(reg.) thin film. These simple, approximate models can be used in the analytic modeling of high-impedance surface enhanced X-band absorbers or computational modeling of other possibly more complicated absorbing structures which are composed, in part, of 370 {Omega}/sq. Kapton XC(reg.) and designed to operate within the X-band. Finally, the results of this study illustrate the need for simgle models for calculating the complex permittivity spectra of 370 {Omega}/sq. Kapton XC(reg.) over a relatively broad bandwidth (1-20 GHz) to facilitate accurate analytical and computational modeling.

36 MATERIALS SCIENCE↗

Verification of BModes: Rotary Beam and Tower Modal Analysis Code; Preprint

This paper describes verification of BModes, a finite-element code developed to provide coupled modes for the blades and tower of a wind turbine. The blades, which may be rotating or non-rotating, and the towers, whether onshore or offshore, are modeled using specialized 15-dof beam finite elements. Both blade and tower models allow a tip attachment, which is assumed to be rigid body with sixmoments of inertia, and a mass centroid that may be offset from the blade or tower axis. Examples of tip attachments are aerodynamic brakes for blades and nacelle-rotor subassembly for towers. BModes modeling allows for tower supports including tension wires, floating platforms, and monopiles on elastic foundations. Coupled modes (implying coupling of flap, lag, axial, and torsional motions) arerequired for modeling major flexible components in a modal-based, aeroelastic code such as FAST1. These are also required for validation of turbine models using experimental data, modal-based fatigue analysis, controls design, and understanding aeroelastic-stability behavior of turbines. Verification studies began with uniform tower models, with and without tip inertia, and progressed torealistic towers. For the floating turbine, we accounted for the effects of hydrodynamic inertia, hydrostatic restoring, and mooring lines stiffness. For the monopole-supported tower, we accounted for distributed hydrodynamic mass on the submerged part of the tower and for distributed foundation stiffness. Finally, we verified a model of a blade carrying tip mass and rotating at different speeds(verifications of other blade models, rotating or non-rotating, have been reported in another paper.) Verifications were performed by comparing BModes-generated modes with analytical results, if available, or with MSC.ADAMS results. All results in general show excellent agreement.

17 WIND ENERGY↗

Performance characteristics of STIS detectors

We report quantum efficiency measurements of back-illuminated, ion-implanted, laser-annealed charge coupled devices (CCD's) in the wavelength range 13-10,000 A. The equivalent quantum efficiency (EQE = effective photons detected per incident photon) ranges from a minimum of 5 percent as 1216 A to a maximum of 87 percent at 135 A. Using a simple relationship for the charge collection efficiency of the CCD pixels as a function of depth, we present a semi-empirical model with few parameters which reproduces our measurements with a fair degree of accuracy. The advantage of this model is that is can be used to predict CCD QE performance for shallow backside implanted devices without detailed solution of a system of differential equations, as in conventional approaches, and yields a simple analytic form for the charge collection efficiency which is adequate for detector calibration purposes. Making detailed assumptions about the dopant profile, we also solve the carrier density and continuity equations in order to relate our semi-empirical model parameters to surface and bulk device properties. The latter procedure helps to better establish device processing parameters for a given level of CCD QE performance.

Stern, Robert A.↗

Task-based detectability in CT image reconstruction by filtered backprojection and penalized likelihood estimation

Purpose: Nonstationarity is an important aspect of imaging performance in CT and cone-beam CT (CBCT), especially for systems employing iterative reconstruction. This work presents a theoretical framework for both filtered-backprojection (FBP) and penalized-likelihood (PL) reconstruction that includes explicit descriptions of nonstationary noise, spatial resolution, and task-based detectability index. Potential utility of the model was demonstrated in the optimal selection of regularization parameters in PL reconstruction. Methods: Analytical models for local modulation transfer function (MTF) and noise-power spectrum (NPS) were investigated for both FBP and PL reconstruction, including explicit dependence on the object and spatial location. For FBP, a cascaded systems analysis framework was adapted to account for nonstationarity by separately calculating fluence and system gains for each ray passing through any given voxel. For PL, the point-spread function and covariance were derived using the implicit function theorem and first-order Taylor expansion according toFessler [“Mean and variance of implicitly defined biased estimators (such as penalized maximum likelihood): Applications to tomography,” IEEE Trans. Image Process. 5(3), 493–506 (1996)]. Detectability index was calculated for a variety of simple tasks. The model for PL was used in selecting the regularization strength parameter to optimize task-based performance, with both a constant and a spatially varying regularization map. Results: Theoretical models of FBP and PL were validated in 2D simulated fan-beam data and found to yield accurate predictions of local MTF and NPS as a function of the object and the spatial location. The NPS for both FBP and PL exhibit similar anisotropic nature depending on the pathlength (and therefore, the object and spatial location within the object) traversed by each ray, with the PL NPS experiencing greater smoothing along directions with higher noise. The MTF of FBP is isotropic and independent of location to a first order approximation, whereas the MTF of PL is anisotropic in a manner complementary to the NPS. Task-based detectability demonstrates dependence on the task, object, spatial location, and smoothing parameters. A spatially varying regularization “map” designed from locally optimal regularization can improve overall detectability beyond that achievable with the commonly used constant regularization parameter. Conclusions: Analytical models for task-based FBP and PL reconstruction are predictive of nonstationary noise and resolution characteristics, providing a valuable framework for understanding and optimizing system performance in CT and CBCT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

StoreRush: An Application-Level Approach to Harvesting Idle Storage in a Best Effort Environment

For a production HPC system where storage devices are shared between multiple applications and managed in a best effort manner, contention is often a major problem leading to some storage devices being more loaded than others and causing a significant reduction in I/O throughput. In this paper, we describe our latest efforts StoreRush to resolve this practical issue at the application level without requiring modification to the file and storage system. The proposed scheme uses a two-level messaging system to harvest idle storage via re-routing I/O requests to a less congested storage location so that write performance is improved while limiting the impact on read by throttling re-routing if deemed too much. An analytical model is derived to guide the setup of optimal throttling factor. The proposed scheme is verified against production applications Pixie3D, XGC1 and QMCPack during production windows, which very well demonstrated the effectiveness (e.g., up to 1.8x improvement in write) and scalability of our approach (up to 131,072 cores).

97 MATHEMATICS AND COMPUTING↗

Planetary Geophysics and Tectonics

The broad objective of this work is to improve understanding of the internal structures and thermal and stress histories of the solid planets by combining results from analytical and computational modeling, and geophysical data analysis of gravity, topography and tectonic surface structures. During the past year we performed two quite independent studies in the attempt to explain the Mariner 10 magnetic observations of Mercury. In the first we revisited the possibility of crustal remanence by studying the conditions under which one could break symmetry inherent in Runcorn's model of a uniformly magnetized shell to produce a remanent signal with a dipolar form. In the second we applied a thin shell dynamo model to evaluate the range of intensity/structure for which such a planetary configuration can produce a dipole field consistent with Mariner 10 results. In the next full proposal cycle we will: (1) develop numerical and analytical and models of thin shell dynamos to address the possible nature of Mercury s present-day magnetic field and the demise of Mars magnetic field; (2) study the effect of degree-1 mantle convection on a core dynamo as relevant to the early magnetic field of Mars; (3) develop models of how the deep mantles of terrestrial planets are perturbed by large impacts and address the consequences for mantle evolution; (4) study the structure, compensation, state of stress, and viscous relaxation of lunar basins, and address implications for the Moon s state of stress and thermal history by modeling and gravity/topography analysis; and (5) use a three-dimensional viscous relaxation model for a planet with generalized vertical viscosity distribution to study the degree-two components of the Moon's topography and gravity fields to constrain the primordial stress state and spatial heterogeneity of the crust and mantle.

Zuber, Maria↗

Flight motor set 360L001 (STS-26R). (Reconstructed dynamic loads analysis)

A transient analysis was performed to correlate the predicted versus measured behavior of the Redesigned Solid Rocket Booster (RSRB) during Flight 360L001 (STS-26R) liftoff. Approximately 9 accelerometers, 152 strain gages, and 104 girth gages were bonded to the motors during this event. Prior to Flight 360L001, a finite element model of the RSRB was analyzed to predict the accelerations, strains, and displacements measured by this developmental flight instrumentation (DFI) within an order of magnitude. Subsequently, an analysis has been performed which uses actual Flight 360L001 liftoff loading conditions, and makes more precise predictions for the RSRB structural behavior. Essential information describing the analytical model, analytical techniques used, correlation of the predicted versus measured RSRB behavior, and conclusions, are presented. A detailed model of the RSRB was developed and correlated for use in analyzing the motor behavior during liftoff loading conditions. This finite element model, referred to as the RSRB global model, uses super-element techniques to model all components of the RSRB. The objective of the RSRB global model is to accurately predict deflections and gap openings in the field joints to an accuracy of approximately 0.001 inch. The model of the field joint component was correlated to Referee and Joint Environment Simulation (JES) tests. The accuracy of the assembled RSRB global model was validated by correlation to static-fire tests such DM-8, DM-9, QM-7, and QM-8. This validated RSRB global model was used to predict RSRB structural behavior and joint gap opening during Flight 360L001 liftoff. The results of a transient analysis of the RSRB global model with imposed liftoff loading conditions are presented. Rockwell used many gage measurements to reconstruct the load parameters which were imposed on the RSRB during the Flight 360L001 liftoff. Each load parameter, and its application, is described. Also presented are conclusions and recommendations based on the analysis of this load case and the resulting correlation between predicted and measured RSRB structural behavior.

Call, V. B.↗

Analytical model and simulation of the Schottky effect on a cryo-cooled bialkali photocathode

A bialkali photocathode with the quantum efficiency (QE) in the range of a few percent was fabricated for the 704 MHz SRF gun at Brookhaven National Laboratory. The photoemission properties of the bialkali photocathode in the superconducting radio frequency (SRF) gun were measured for the first time, and a good beam experiment result was obtained. The performance of the bialkali photocathode was investigated during the commissioning process of the 704 MHz SRF gun. In conclusion, the effect of electric field on the QE of the cryo-cooled cathode was characterized by an analytical model and a code for the first time.

43 PARTICLE ACCELERATORS↗

Benchmarking of collision operators with momentum source corrections

Several linearized collision operator models with parallel momentum conservation enforced by source functions are benchmarked against the correct collision operator based on Rosenbluth potentials. The model operators without energy diffusion allow for an analytic solution of a generalized Spitzer problem. For the other operators under investigation, an integrodifferential equation is solved. The benchmarking is performed both for the parallel conductivity with the ions assumed at rest and for the bootstrap current, where ion and electron flows are collisionally coupled. The accuracy of the results obtained with the operators varies from rather poor in the case of the simplest monoenergetic model to quite satisfactory for the models employing an energy-weighted parallel momentum source function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Construction of a quartz spherical analyzer: application to high-resolution analysis of the Ni K α emission spectrum

The construction and characterization of a focusing X-ray spherical analyzer based on α-quartz 4$\bar{4}$04 are presented. The performance of the analyzer was demonstrated by applying it to a high-resolution X-ray spectroscopy study of the K α 1,2 emission spectrum of Ni. An analytical representation based on physical grounds was assumed to model the shape of the X-ray emission lines. Satellite structures assigned to 3 d spectator hole transitions were resolved and determined as well as their relative contribution to the emission spectrum. The present results on 1 s -1 3 d -1 shake probabilities support a recently proposed calculation framework based on a multi-configuration atomic model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An analytical thermohydraulic model for discretely fractured geothermal reservoirs

In discretely fractured reservoirs such as those found in Enhanced/Engineered Geothermal Systems (EGS), knowledge of the fracture network is important in understanding the thermal hydraulics, i.e., how the fluid flows and the resulting temporal evolution of the subsurface temperature. Here, the purpose of this study was to develop an analytical model of the fluid flow and heat transport in a discretely fractured network that can be used for a wide range of modeling applications and serve as an alternative analysis tool to more computationally intensive numerical codes. Given the connectivity and structure of a fracture network, the flow in the system was solved using a linear system of algebraic equations for the pressure at the nodes of the network. With the flow determined, the temperature in the fracture was solved by coupling convective heat transport in the fracture with one-dimensional heat conduction perpendicular to the fracture, employing the Green’s function derived solution for a single discrete fracture. The predicted temperatures along the fracture surfaces from the analytical solution were compared to numerical simulations using the TOUGH2 reservoir code. Through two case studies, we showed the capabilities of the analytical model and explored the effect of uncertainty in the fracture apertures and network structure on thermal performance. While both sources of uncertainty independently produce large variations in production temperature, uncertainty in the network structure, whenever present, had a predominant influence on thermal performance.

58 GEOSCIENCES↗

Investigating the relationship between radial pre-stress magnitude and ballistic projectile dwell in heavy confined ceramic targets

A series of bare silicon carbide ceramic armour disks were manufactured with high-strength steel containment to induce varying magnitudes of radial pre-stress. The induced radial stresses, ranging from 0 to 900 MPa, were measured via neutron diffraction and verified by comparison with numerical calculations. Four targets of each configuration, referred to as slip-fit, moderate pre-stress, and high pre-stress, were subject to ballistic testing with hemispherical-nose, tungsten heavy alloy long rod projectiles to determine the interface defeat transition velocity. In-situ diagnostics were unsuccessful in aiding the identification of interface defeat, necessitating a reliance on post-mortem assessment. A transition velocity of approx. 1000 m/s was identified for the unstressed target, increasing to approx. 1200 m/s for the pre-stressed configurations. No performance effect was discernible between the moderate (372 MPa) and high (899 MPa) pre-stress configurations, suggesting that an optimal performance may be achieved for lower pre-stress levels (i.e., <372 MPa). Additionally, the test results were compared with four semi-analytical predictions of interface defeat performance and good agreement was found, albeit with significant range in the model predictions.

42 ENGINEERING↗

Development of a novel type of hybrid non-symmetric flexure hinges

A novel type of hybrid non-symmetric flexure hinges (NSFHs) is developed for higher motion precision in this paper, then the finite beam based matrix modeling (FBMM) method is employed to describe elastic deformation behaviors, model compliance matrix, and define non-dimensional precision factors of the hybrid NSFHs. Influences of the dimensional parameters on the dominant compliances and motion accuracies of the NSFHs are analytically investigated based on the FBMM models, while an asymmetry ratio is introduced and its influences on performances of the NSFHs are well revealed. Moreover, making comparisons of the main performances between the proposed NSFHs and symmetric flexure hinges, the obtained results indicate that the hybrid NSFHs can greatly improve the motion accuracy and suppress the adverse inherent motions. Finally, performances of the NSFHs and modeling accuracies are investigated by experimental tests, and making comparison with other flexure hinges.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A versatile dual-species Zeeman slower for caesium and ytterbium

We describe the design, construction, and operation of a versatile dual-species Zeeman slower for both Cs and Yb, which is easily adaptable for use with other alkali metals and alkaline earths. With the aid of analytic models and numerical simulation of decelerator action, we highlight several real-world problems affecting the performance of a slower and discuss effective solutions. To capture Yb into a magneto-optical trap (MOT), we use the broad {sup 1}S{sub 0} to {sup 1}P{sub 1} transition at 399 nm for the slower and the narrow {sup 1}S{sub 0} to {sup 3}P{sub 1} intercombination line at 556 nm for the MOT. The Cs MOT and slower both use the D2 line (6{sup 2}S{sub 1/2} to 6{sup 2}P{sub 3/2}) at 852 nm. The slower can be switched between loading Yb or Cs in under 0.1 s. We demonstrate that within a few seconds the Zeeman slower loads more than 10{sup 9} Yb atoms and 10{sup 8} Cs atoms into their respective MOTs. These are ideal starting numbers for further experiments on ultracold mixtures and molecules.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SIMULATIONS OF WIDE-FIELD WEAK LENSING SURVEYS. I. BASIC STATISTICS AND NON-GAUSSIAN EFFECTS

We study the lensing convergence power spectrum and its covariance for a standard {lambda}CDM cosmology. We run 400 cosmological N-body simulations and use the outputs to perform a total of 1000 independent ray-tracing simulations. We compare the simulation results with analytic model predictions. The semianalytic model based on Smith et al. fitting formula underestimates the convergence power by {approx} 30% at arcmin angular scales. For the convergence power spectrum covariance, the halo model reproduces the simulation results remarkably well over a wide range of angular scales and source redshifts. The dominant contribution at small angular scales comes from the sample variance due to the number fluctuations of halos in a finite survey volume. The signal-to-noise ratio for the convergence power spectrum is degraded by the non-Gaussian covariances by up to a factor of 5 for a weak lensing survey to z{sub s} {approx} 1. The probability distribution of the convergence power spectrum estimators, among the realizations, is well approximated by a {chi}{sup 2} distribution with broadened variance given by the non-Gaussian covariance, but has a larger positive tail. The skewness and kurtosis have non-negligible values especially for a shallow survey. We argue that a prior knowledge on the full distribution may be needed to obtain an unbiased estimate on the ensemble-averaged band power at each angular scale from a finite volume survey.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation studies of the interaction of laser radiation with additively manufactured foams

The interaction of laser radiation with foams of various porosities and low densities has been the subject of several numerical and experimental studies. In all cases, the modeling of low-Z under-dense foams as uniform gases of equivalent average density using standard radiation-hydrodynamics codes has resulted in heat-front velocities that are considerably faster than those observed experimentally. It has been theoretically conjectured that this difference may be attributed to the breakdown of the foam’s morphology, leading to a dynamics of filament expansion where the ion and electron energy partitions are significantly different from those calculated using the uniform gas model. We found that 3D computer simulations employing a disconnected representation of the foam’s microstructure which allowed for the dynamics of foam element heating, expansion, and stagnation largely supported the theoretical picture. Simulations using this model for laser experiments on under-dense 2 mg cc -1 SiO 2 aerogel foams reproduced the experimental data fairly well. We used the validated model in simulations of low-density structured foam-like materials (produced via additive manufacturing) with a variety of morphologies. We found that the log-pile configurations were consistent with the analytical propagation model of Gus’kov et al. Further validation of the model was obtained by simulating experiments performed at the Jupiter Laser Facility using the log-pile and octet-truss foam morphologies. Simulations of the foam-laser interaction using a wave propagation code showed that the microstructure was able to enhance stimulated Brillouin scattering (SBS) by concentrating the light energy into density holes. In turn, this promotes laser filamentation, reducing SBS and bringing the predicted values closer to the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coupling of electroelastic dynamics and direct contact ultrasonic drying formulation for annular piezoelectric bimorph transducers

A newly developed technique for drying clothes without thermal energy has been developed through the utilization of ultrasonic vibrations from piezoelectric transducers. The novel technique incorporates the actuation of a thin stainless steel disk in contact with wet fabric via annular piezoelectric rings, where water in the liquid form is atomized, transported through microchannels in the disk, and ejected as a mist. In such a system, resonance matching between the actuation portion of the transducer and the portion contacting fabric must be realized, with theoretical results from the developed electromechanical model showing a reduction in energy consumption by 50% when resonance matching is achieved. The electrically coupled distributed parameter model for an annular bimorph piezoelectric transducer is developed for optimization of ultrasonic drying technology. The thickness mode vibrations are shown to dominate the behavior of the system, where the analytically developed model can be optimized to increase the output acceleration of the transducer, thus increasing drying performance. Here, the electromechanical equation developed will be connected to the drying rates of fabrics in contact with said vibrations, where the novelty of the coupled equations and its description of the physics of ultrasonic drying will be discussed.

36 MATERIALS SCIENCE↗