SEARCH · Engineering Papers

Results for “activity generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

All sources NASA NTRS DOE OSTI

DOE OSTI2023

The Lack of a QBO-MJO Connection in Climate Models With a Nudged Stratosphere

The observed stratospheric quasi-biennial oscillation (QBO) and the tropospheric Madden-Julian oscillation (MJO) are strongly connected in boreal winter, with stronger MJO activity when lower-stratospheric winds are easterly. However, the current generation of climate models with internally generated representations of the QBO and MJO do not simulate the observed QBO-MJO connection, for reasons that remain unclear. Furthermore, this study builds on prior work exploring the QBO-MJO link in climate models whose stratospheric winds are relaxed toward reanalysis, reducing stratospheric biases in the model and imposing a realistic QBO. A series of ensemble experiments are performed using four state-of-the-art climate models capable of representing the MJO over the period 1980–2015, each with similar nudging in the stratosphere. In these four models, nudging leads to a good representation of QBO wind and temperature signals, however no model simulates the observed QBO-MJO relationship. Biases in MJO vertical structure and cloud-radiative feedbacks are investigated, but no conclusive model bias or mechanism is identified that explains the lack of a QBO-MJO connection.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Carbon monoxide oxidation expands the known metabolic capacity in anaerobic methanotrophic consortia

Consortia of anaerobic methane-oxidizing archaea (ANME-2) and sulphate-reducing bacteria (SRB) represent globally relevant syntrophic associations capable of growing with minimal amounts of free energy and can persist when methane becomes limiting. Carbon monoxide (CO) has been reported in seep environments and represents a thermodynamically favourable alternative electron donor due to its low reduction potential. Here, we show that environmental ANME-SRB consortia can oxidize CO in the absence of methane, in anoxic microcosm experiments using a combination of stable isotope geochemical tracers, metatranscriptomics, and single cell activity measurements (FISH–nanoSIMS). The oxidation of CO was coupled with sulphate-reduction by syntrophic consortia, and, in the absence of sulphate, through CO 2 reduction to methane by ANME-2. Under these conditions, the production of methane was one ninth the rate of methanotrophy coupled to sulphate-reduction. Paired single cell FISH-nanoSIMS analysis of anabolic activity indicates that CO respiration appears to support cell maintenance rather than active growth, consistent with the observed down-regulation of energy generating complexes in ANME (e.g., mtr, rnf, etc.). The versatile capability of CO oxidation by anaerobic methanotrophic consortia broadens our understanding of carbon cycling in methane seeps and highlights potential mechanisms of resilience by methanotrophic archaea under changing geochemical regimes.

03 NATURAL GAS↗

DOE OSTI2019

SOS: symmetry-operational similarity

Abstract Symmetry often governs condensed matter physics. The act of breaking symmetry spontaneously leads to phase transitions, and various observables or observable physical phenomena can be directly associated with broken symmetries. Examples include ferroelectric polarization, ferromagnetic magnetization, optical activities (including Faraday and magneto-optic Kerr rotations), second harmonic generation, photogalvanic effects, nonreciprocity, various Hall-effect-type transport properties, and multiferroicity. Herein, we propose that observable physical phenomena can occur when specimen constituents (i.e., lattice distortions or spin arrangements, in external fields or other environments) and measuring probes/quantities (i.e., propagating light, electrons, or other particles in various polarization states, including vortex beams of light and electrons, bulk polarization, or magnetization) share symmetry-operational similarity (SOS) in relation to broken symmetries. In addition, quasi-equilibrium electronic transport processes such as diode-type transport effects, linear or circular photogalvanic effects, Hall-effect-type transport properties ((planar) Hall, Ettingshausen, Nernst, thermal Hall, spin Hall, and spin Nernst effects) can be understood in terms of symmetry-operational systematics. The power of the SOS approach lies in providing simple and physically transparent views of otherwise unintuitive phenomena in complex materials. In turn, this approach can be leveraged to identify new materials that exhibit potentially desired properties as well as new phenomena in known materials.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Continuous production of pure liquid fuel solutions via electrocatalytic CO 2 reduction using solid-electrolyte devices

Electrocatalytic CO 2 reduction is often carried out in a solution electrolyte such as KHCO 3 (aq), which allows for ion conduction between electrodes. Thus, liquid products that form are in a mixture with the dissolved salts, requiring energy-intensive downstream separation. In this work, we report continuous electrocatalytic conversion of CO 2 to pure liquid fuel solutions in cells that utilize solid electrolytes, where electrochemically generated cations (such as H+) and anions (such as HCOO–) are combined to form pure product solutions without mixing with other ions. Using a HCOOH-selective (Faradaic efficiencies>90%) and easily scaled Bi catalyst at the cathode, we demonstrate production of pure HCOOH solutions with concentrations up to 12M. We also show 100h continuous and stable generation of 0.1 M HCOOH with negligible degradation in selectivity and activity. Production of other electrolyte-free C 2+ liquid oxygenate solutions, including acetic acid, ethanol and n-propanol, are also demonstrated using a Cu catalyst. Lastly, we show that our CO 2 reduction cell with solid electrolytes can be modified to suit other, more complex practical applications.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Single-cell stable isotope probing in microbial ecology

Abstract Environmental and host-associated microbiomes are typically diverse assemblages of organisms performing myriad activities and engaging in a network of interactions that play out in spatially structured contexts. As the sum of these activities and interactions give rise to overall microbiome function, with important consequences for environmental processes and human health, elucidating specific microbial activities within complex communities is a pressing challenge. Single-cell stable isotope probing (SC-SIP) encompasses multiple techniques that typically utilize Raman microspectroscopy or nanoscale secondary ion mass spectrometry (NanoSIMS) to enable spatially resolved tracking of isotope tracers in cells, cellular components, and metabolites. SC-SIP techniques are uniquely suited for illuminating single-cell activities in microbial communities and for testing hypotheses about cellular functions generated for example from meta-omics datasets. Here, we illustrate the insights enabled by SC-SIP techniques by reviewing selected applications in microbiology and offer a perspective on their potential for future research.

Alcolombri, Uria (ORCID:0000000335615091)↗

DOE OSTI2020

The high-yield direct synthesis of dimethyl ether from CO 2 and H 2 in a dry reaction environment

Direct dimethyl ether (DME) synthesis from CO 2 and H 2 is considered a promising production route. However, this process is thermodynamically and kinetically restricted by the presence of water as a byproduct. In this study, a water-conduction membrane was incorporated into the direct DME synthesis reactor to generate a dry reaction environment. In the absence of water, the activities of the CO 2 hydrogenation catalyst (CZA) and methanol dehydration catalyst (HZSM-5) were boosted 4- and 10-fold, respectively, and single-pass CO 2 conversion of up to 73.4%, far beyond equilibrium, and DME yields of up to 54.5% were obtained. Moreover, the good protection of the catalysts against fast deactivation was demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Proton transfer during reduction of the catalytic metallo-cofactors of the three nitrogenase isozymes

Nitrogenase catalyzes biological nitrogen fixation, the conversion of atmospheric N 2 into bioavailable ammonia. The three nitrogenase isozymes—Mo-nitrogenase, V-nitrogenase, and Fe-nitrogenase—utilize catalytic cofactors distinguished by their metal composition (Fe 7 M, M = Mo, V, or Fe; denoted FeM-co). Their catalytic cycles involve stepwise addition of 8[e−/H+] to FeM-co, generating intermediates designated E n , where n is the number of [e − /H + ] delivered. The electron-transfer has been extensively characterized, but the proton delivery has not. Here, we investigate [e − /H + ] delivery during early-stage conversions, primarily E 0 → E 1 (H), for each of the three nitrogenases, using as reductants γ-ray-generated thermolyzed, mobile electrons at 77 K, and radiation-generated solvent radicals during subsequent annealing to higher temperatures. Our results show E 0 → E 1 (H) conversion differs among the three MFe-proteins. The FeMo-co of MoFe-protein accepts an electron (ET) during 77 K γ-irradiation, but proton transfer (PT) to generate E 1 (H) is only enabled by conformational or thermodynamic activation upon cryoannealing to ∼200 K(ET/PT). For VFe-protein, E 1 (H) forms during annealing at-and-above 210 K by electron-transfer to FeV-co from radicals through proton-coupled electron transfer (PCET), which too is enabled by activated proton transfer. FeFe-protein differs in directly exhibiting delivery of protons at 77 K, which together with the mobile electrons react to form E 1 (H). This could well occur by PCET at 77 K, but does not preclude the possibility of sequential 77 K electron/proton transfer (ET/PT). In addition, 450 nm photolysis reveals the E 1 (H) state of FeV-co, like that of FeFe-co, contains a hydride bound to a formally oxidized cofactor. The mechanistic differences observed here provide a contribution towards understanding the sources of catalytic differences among the three nitrogenase isozymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Issues in Bi-Directional Interoperability between BIM and BEM

The state-of-the-art interoperability between Building Information Modeling (BIM) and Building Energy Modeling (BEM) is mainly one-way. BEM software like EnergyPlus takes design input from BIM and simulates the energy consumption of the building. BIM, however, is unable to leverage energy simulation results from BEM smoothly. This lack of bi-directional interoperability between BIM and BEM prevents buildings from seeking more energy-efficient design options and limits BIM applications in optimal generative design. In this research, the authors have conducted the following activities related to two-way interoperability between BIM and BEM: (1) surveyed its current status through literature review, (2) investigated barriers to the bi-directional interoperability, and (3) suggested possible approaches to enable bi-directional interoperability and research outlook in the field. As a result, the authors have identified three main barriers to BIM BEM interoperability, namely, inefficient collaboration, limited scope in information transformation, and lack of BEM to BIM transformation. Future directions are suggested to address these barriers.

building design↗

DOE OSTI2023

Impact of fusion reactor neutronics modeling for transmutation and thermal feedback *

Abstract Fusion neutronics calculations provide important metrics pertinent to fusion device operations, such as tritium breeding ratios (TBRs) and data on heat deposition, material activation, and damage. Because of the high computational burden required to generate a high-fidelity Monte Carlo simulation of a 3D fusion device, various assumptions are made to reduce computational time by simplifying the reactor model or the calculation iteration. This paper explores the impact of fusion neutronics metrics such as the TBR and decay heat of structural materials based on assumptions of material composition in the fusion reactor and temperature modeling of materials. Results show that for compact tokamaks with high power and long operational cycles, the transmutation of structural materials is significant enough to cause a substantial change in the flux spectrum and decrease the TBR by 1.68% after 2 years of full power operation. Additionally, assuming a constant temperature and material density can impact the TBR calculations up to 3%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

A Hardware-in-the-Loop Experimental Testbed Using Air Conditioners for Grid Balancing

Driven by the need to offset the variability of renewable generation on the grid, development of load control is a highly active field of research. However, practical use of residential loads for grid balancing remains rare, in part due to the cost of communicating with large numbers of small loads and also the limited experimentation done so far to demonstrate reliable operation. To establish a basis for the safe and reliable use of fleets of compressor loads as distributed energy resources, we constructed an experimental testbed in a laboratory, so that load coordination schemes could be tested at extreme conditions. Here, this experimental testbed was used to tune a simulation testbed to which it was then linked, thereby augmenting the effective size of the fleet. Modeling of the system was done both to demonstrate the experimental testbed's behavior and also to understand how to tune the behavior of each load. Implementing this testbed has enabled rapid turnaround of experiments on various load control algorithms, and year-round testing without the constraints and limitations arising in seasonal field tests with real houses. Experimental results show the practical feasibility of an ensemble of small loads contributing to grid balancing.

Air Conditioners↗

DOE OSTI2020

Systems Analysis of NADH Dehydrogenase Mutants Reveals Flexibility and Limits of Pseudomonas taiwanensis VLB120’s Metabolism

Obligate aerobic organisms rely on a functional electron transport chain for energy conservation and NADH oxidation. Because of this essential requirement, the genes of this pathway are likely constitutively and highly expressed to avoid a cofactor imbalance and energy shortage under fluctuating environmental conditions. In this work, we investigated the essentiality of the three NADH dehydrogenases of the respiratory chain of the obligate aerobe Pseudomonas taiwanensis VLB120 and the impact of the knockouts of corresponding genes on its physiology and metabolism. While a mutant lacking all three NADH dehydrogenases seemed to be nonviable, the single or double knockout mutant strains displayed no, or only a weak, phenotype. Only the mutant deficient in both type 2 dehydrogenases showed a clear phenotype with biphasic growth behavior and a strongly reduced growth rate in the second phase. In-depth analyses of the metabolism of the generated mutants, including quantitative physiological experiments, transcript analysis, proteomics, and enzyme activity assays revealed distinct responses to type 2 and type 1 dehydrogenase deletions. An overall high metabolic flexibility enables P. taiwanensis to cope with the introduced genetic perturbations and maintain stable phenotypes, likely by rerouting of metabolic fluxes. This metabolic adaptability has implications for biotechnological applications. While the phenotypic robustness is favorable in large-scale applications with inhomogeneous conditions, the possible versatile redirecting of carbon fluxes upon genetic interventions can thwart metabolic engineering efforts. While Pseudomonas has the capability for high metabolic activity and the provision of reduced redox cofactors important for biocatalytic applications, exploitation of this characteristic might be hindered by high, constitutive activity of and, consequently, competition with the NADH dehydrogenases of the respiratory chain. The in-depth analysis of NADH dehydrogenase mutants of Pseudomonas taiwanensis VLB120 presented here provides insight into the phenotypic and metabolic response of this strain to these redox metabolism perturbations. This high degree of metabolic flexibility needs to be taken into account for rational engineering of this promising biotechnological workhorse toward a host with a controlled and efficient supply of redox cofactors for product synthesis.

36 MATERIALS SCIENCE↗

DOE OSTI2019

goTLS

goTLS is an automated TLS certificate issuance and management tool for Windows, Mac, and Linux. It can generate keys, CSRs, and optionally obtain the certificate with an internal Active Directory Certificate Services (ADCS) endpoint.

Freeman, Ian↗

DOE OSTI2024

Droplet Growth or Evaporation Does Not Buffer the Variability in Supersaturation in Clean Clouds

Abstract Water vapor supersaturation in clouds is a random variable that drives activation and growth of cloud droplets. The Pi Convection–Cloud Chamber generates a turbulent cloud with a microphysical steady state that can be varied from clean to polluted by adjusting the aerosol injection rate. The supersaturation distribution and its moments, e.g., mean and variance, are investigated for varying cloud microphysical conditions. High-speed and collocated Eulerian measurements of temperature and water vapor concentration are combined to obtain the temporally resolved supersaturation distribution. This allows quantification of the contributions of variances and covariances between water vapor and temperature. Results are consistent with expectations for a convection chamber, with strong correlation between water vapor and temperature; departures from ideal behavior can be explained as resulting from dry regions on the warm boundary, analogous to entrainment. The saturation ratio distribution is measured under conditions that show monotonic increase of liquid water content and decrease of mean droplet diameter with increasing aerosol injection rate. The change in liquid water content is proportional to the change in water vapor concentration between no-cloud and cloudy conditions. Variability in the supersaturation remains even after cloud droplets are formed, and no significant buffering is observed. Results are interpreted in terms of a cloud microphysical Damköhler number (Da), under conditions corresponding to , i.e., the slow-microphysics regime. This implies that clouds with very clean regions, such that is satisfied, will experience supersaturation fluctuations without them being buffered by cloud droplet growth. Significance Statement The saturation ratio (humidity) in clouds controls the growth rate and formation of cloud droplets. When air in a turbulent cloud mixes, the humidity varies in space and time throughout the cloud. This is important because it means cloud droplets experience different growth histories, thereby resulting in broader size distributions. It is often assumed that growth and evaporation of cloud droplets buffers out some of the humidity variations. Measuring these variations has been difficult, especially in the field. The purpose of this study is to measure the saturation ratio distribution in clouds with a range of conditions. We measure the in-cloud saturation ratio using a convection cloud chamber with clean to polluted cloud properties. We found in clouds with low concentrations of droplets that the variations in the saturation ratio are not suppressed.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Utah FORGE: Neubrex Well 16B(78)-32 DAS Data - April, 2024

This dataset comprises Distributed Acoustic Sensing (DAS) data collected from the Utah FORGE monitoring well 16B(78)-32 (the producer well) during hydraulic fracture stimulation operations conducted in April 2024. The data were acquired continuously over the stimulation period at a temporal sampling rate of 10,000 Hz (10 kS/s) and a spatial resolution of approximately 3.35 feet (1.02109 meters). The measurements were captured using a Neubrex NBX-S4100 Time Gated Digital DAS interrogator unit connected to a single-mode fiber optic cable, which was permanently installed within the casing string. All recorded channels correspond to downhole segments of the fiber optic cable, from a measured depth (MD) of 5,369.35 feet to 10,352.11 feet. The DAS data reflect raw acoustic energy generated by physical processes within and surrounding the well during stimulation activities at wells 16A(78)-32 and 16B(78)-32. These data have potential applications in analyzing cross-well strain, far-field strain rates (including microseismic activity), induced seismicity, and seismic imaging. Metadata embedded in the attributes of the HDF5 files include detailed information on the measured depths of the channels, interrogation parameters, and other acquisition details. The dataset also includes a recording of a seminar held on September 19, 2024, where Neubrex's Chief Operating Officer presented insights into the data collection, analysis, and preliminary findings. The raw data files, stored in HDF5 format, are organized chronologically according to the recording intervals from April 9 to April 24, 2024, with each file corresponding to a 12-second recording interval.

15 GEOTHERMAL ENERGY↗

DOE OSTI2019

Next Generation Robust Polarization Photocathodes for EIC

Cornell group developed and characterized robust photocathodes dedicated to generation of spin-polarized electrons by employing a thin protective activation layer of a robust material in place of the conventional cesiation, which is extremely prone to the damage by ions and chemical poisoning. Various thicknesses of Cs2Te and of other materials on III-V semiconductors were studied to understand their effect on the cathode longevity and the polarization state. These photocathodes, as well as new alternative materials, will be eventually tested with high beam current for their operational (lifetime) performance in the Cornell HV DC guns, including a brand- new photoemission high voltage gun that features a cryogenically cooled photocathode holder. The research conducted opens a new and robust way to reach the negative electron affinity for a large class of photocathodes specifically designed to maximize their accelerator performance. It particular, it benefits the future EIC by improving the lifetime available from spin-polarized electron photoemission sources.

43 PARTICLE ACCELERATORS↗

DOE OSTI2019

ISOCS and SNAP™. Fundamemtals of nondestructive assay for international safeguards

This report introduces the principles of ISOCS and SNAP™ and their applications for measuring nuclear material. The ISOCS analysis process and the SNAP™ four-step process are described. The goals of the report are to explain 1) how ISOCS generates an efficiency curve, 2) how to calculate a minimum detectable activity (MDA) in SNAP™ and ISOCS, and 3) the corrections necessary to perform a simple assay estimate by hand calculation.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

DOE OSTI2021

Intermetallic PtCo Catalysts with Enhanced Performance and Stability [Slides]

Pt-based catalysts need systematic modifications to be adapted to different applications (LDV or HDV). L1 0 -CoPt particles have been demonstrated as highly active and durable cathode materials for fuel cells. Colloidal synthesis can generate catalysts with highly uniform particles size but the removal of surfactants is challenging. Acid leaching warrants a Pt shell with certain thickness, which mitigates the Co leaching. Controlling the size of L1 0 -CoPt particles is a robust method to alter their catalytic behaviours and tailor the function of catalysts. Modifying the carbon features (e.g. porosity and graphitization) is an effective method to regulate the performance and stability of catalysts to adapt the catalysts to different applications.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2024

Concentrated solar thermal fuels production by electric field enhanced two step gas splitting (Final Technical Report)

Solar thermochemical CO 2 splitting (STCS) is plagued by high solar field costs due to the extraordinarily high temperatures (~1500 °C) required. In STCS, a reduction/oxidation active material, CeO 2 , is thermally reduced to CeO 2-δ generating O2 at ~1500 °C; then CeO 2-δ is re-oxidized by CO 2 to re-form CeO 2 and CO, a precursor to liquid fuels. Before this project, there were no known methods to decrease the reduction temperature while maintaining high conversion of the CO 2 to CO; thus, projected solar thermal CO costs had stagnated.

10 SYNTHETIC FUELS↗