Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

The Lunar Mapping and Modeling Project Update

The Lunar Mapping and Modeling Project (LMMP) is managing the development of a suite of lunar mapping and modeling tools and data products that support lunar exploration activities, including the planning, design, development, test, and operations associated with crewed and/or robotic operations on the lunar surface. In addition, LMMP should prove to be a convenient and useful tool for scientific analysis and for education and public outreach (E/PO) activities. LMMP will utilize data predominately from the Lunar Reconnaissance Orbiter, but also historical and international lunar mission data (e.g. Lunar Prospector, Clementine, Apollo, Lunar Orbiter, Kaguya, and Chandrayaan-1) as available and appropriate. LMMP will provide such products as image mosaics, DEMs, hazard assessment maps, temperature maps, lighting maps and models, gravity models, and resource maps. We are working closely with the LRO team to prevent duplication of efforts and ensure the highest quality data products. A beta version of the LMMP software was released for limited distribution in December 2009, with the public release of version 1 expected in the Fall of 2010.

Noble, S.↗
NASA NTRS1993

Neural network prediction of aluminum-lithium weld strengths from acoustic emission amplitude data

AE flaw growth activity was monitored in aluminum-lithium weld specimens from the onset of tensile loading to failure. Data on actual ultimate strengths together with AE data from the beginning of loading up to 25 percent of the expected ultimate strength were used to train a backpropagation neural network to predict ultimate strengths. Architecturally, the fully interconnected network consisted of an input layer for the AE amplitude data, a hidden layer to accommodate failure mechanism mapping, and an output layer for ultimate strength prediction. The trained network was then applied to the prediction of ultimate strengths in the remaining six specimens. The worst case prediction error was found to be +2.6 percent.

Hill, Eric V. K.↗
NASA NTRS1979

An analytical technique for predicting the characteristics of a flexible wing equipped with an active flutter-suppression system and comparison with wind-tunnel data

An analytical technique for predicting the performance of an active flutter-suppression system is presented. This technique is based on the use of an interpolating function to approximate the unsteady aerodynamics. The resulting equations are formulated in terms of linear, ordinary differential equations with constant coefficients. This technique is then applied to an aeroelastic model wing equipped with an active flutter-suppression system. Comparisons between wind-tunnel data and analysis are presented for the wing both with and without active flutter suppression. Results indicate that the wing flutter characteristics without flutter suppression can be predicted very well but that a more adequate model of wind-tunnel turbulence is required when the active flutter-suppression system is used.

Abel, I.↗
DOE OSTI2018

Development of a Technology Roadmap for Online Monitoring of Nuclear Power Plants

The nuclear power industry has recently recognized the potential cost saving that can be achieved from migrating the current manual and labor dependent surveillance and preventive maintenance activities to data-driven online monitoring methods. Since then, several efforts have been launched with various degrees of momentum to tackle specific surveillance or preventive maintenance activities. The light water reactor sustainability program (LWRS) program has anticipated this need and launched an effort that aimed to develop a technology roadmap for the nuclear power industry. Because the roadmap has to be focused towards the user or application’s value, and because nuclear power plants have different process efficiencies and deficiencies, the technology roadmap has to be plant independent. Achieving this objective required optimizing the extent of details described by a technology roadmap. The approach followed is for the roadmap to describe the sequence of activities needed to automate a process or equipment activity, but not describe the sequence of processes or equipment to target. For example, the steps required to migrate the inspection of a pump are plant independent. However, defining that the migration of feed water pumps inspections to online monitoring should be performed before inspections of feed water valves is dependent on multiple plant factors such as the plant requirements, labor work capacity, and process or equipment conditions. The technology roadmap was broken down into six elements, four of which have a sequential path of advancement, while the other two are supporting elements to the sequential elements. The sequential part of the roadmap analyzes data collection, analytics, visualization, and management. For these elements of the technology roadmap, the migration of an activity is defined in three states. The base state is defined as the most primitive, manual, and labor dependent process used by some nuclear power plants. The modern state is defined as the state that can be achieved if the activities are augmented or replaced by current technologies that are commercially available or are soon to be available. The state of the art is defined as using technologies of the future, i.e. concept and technologies that are being researched. The data collection part of the technology roadmap defines three states of every process performed in a nuclear power plant. However, the data analytics part is described based on equipment, because automating an activity performed on one equipment required considering multiple data sources. The visualization and data management elements are process or equipment independent. Visualization describes the means to use human factor science and technologies advancement in presenting the data collected and the data analytics results. The data management targets storage, communication, and computational power need, in addition to data integration and sharing. Since storage, communication, and computational power technologies and path for deployment are known to any information technology organization, this effort targeted the cost of data management. This has a direct impact on the feasibility of the automation effort. The supporting elements analyzes the value of automating the activity and the change challenges to tackle. For the support elements, the roadmap targeted describing activities that need to be performed as part of the roadmap development. The value element of the roadmap describes how to analyze the cost saving and the associated risk. The change management identifies multiple factors to consider such as regulation, cybersecurity, resource availability, supporting infrastructure availability, feasibility (power, fitness, environment tolerance, facilities), and cultural change.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRSDate not supplied

NASA Commercial Smallsat Data Acquisition (CSDA) Program

The objective of the CSDA Program is to identify, evaluate and acquire data from commercial sources that support NASA’s Earth science research and application activities. Commercially acquired data may provide a cost-effective means to augment and/or complement the suite of Earth Observations acquired by NASA and other US government agencies and those acquired by international partners and agencies. The CEOS Strategic Implementation Team has requested NASA to provide a short presentation to report on its respective new space (commercial vendors) activities and ambitions - to help inform the discussion on the nature and substance of a strategy for CEOS SIT to take forward.

Commercial remote sensing↗
DOE OSTI2017

Hanford Site Burrowing Owl Monitoring Report for Calendar Year 2015

The U.S. Department of Energy, Richland Operations Office (DOE-RL) conducts ecological monitoring on the Hanford Site to collect and track data needed to ensure compliance with environmental laws, regulations, and policies governing DOE activities. Ecological monitoring data provide baseline information about the plants, animals, and habitat under DOE-RL stewardship at Hanford required for decision-making under the National Environmental Policy Act (NEPA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The Hanford Site Comprehensive Land Use Plan (CLUP, DOE/EIS-0222-F) which is the Environmental Impact Statement for Hanford Site activities, helps ensure that DOE-RL, its contractors, and other entities conducting activities on the Hanford Site are in compliance with NEPA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Hanford Site Reptile Monitoring Report for Calendar Year 2015

The U.S. Department of Energy, Richland Operations Office (DOE-RL) conducts ecological monitoring on the Hanford Site to collect and track data needed to ensure compliance with environmental laws, regulations, and policies governing DOE activities. Ecological monitoring data provide baseline information about the plants, animals, and habitats under DOE-RL stewardship at Hanford required for decision-making under the National Environmental Policy Act (NEPA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The Hanford Site Comprehensive Land Use Plan (CLUP, DOE 1999), which is the Environmental Impact Statement for Hanford Site activities, helps ensure that DOE-RL, its contractors, and other entities conducting activities on the Hanford Site are in compliance with NEPA.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

NASA's Fire Information for Resource Management System (FIRMS): Near Real-Time Global Fire Monitoring Using Data from MODIS and VIIRS

NASA's Fire Information for Resource Management System (FIRMS) provides near-real time active fire / hotspot products from MODIS and VIIRS to users in over 160 countries. The goal of FIRMS is to meet the needs of natural resource and protected area managers that face considerable challenges in obtaining timely satellite-derived information on fires burning within and around their management area. FIRMS has been reliably providing active fire / hotspot data in easy to use formats since its inception in 2006. Fire information is provided through a web map interface, email alerts, a web mapping service, and a range of downloadable files (SHP, CSV, KML and JSON). FIRMS data are used directly by end users and by brokers who take the data and add value to it before re-distributing it.FIRMS was initially developed by the University of Maryland in 2006; it was funded by the United Nations FAO and NASA's Applied sciences program under a NASA ROSES call. In 2012 FIRMS became integrated in to NASA's Land Atmosphere Near real-time Capability for EOS (LANCE); a virtual system that leverages NASAs existing science processing capabilities to deliver NRT data from ten instruments within 3 hours of satellite overpass. This presentation will describe the FIRMS system, provide an overview of the system, briefly describe some of the known applications and describe plans to further integrate the data in to NASA's Global Imagery Browse Services (GIBS) public mapping services and Worldview website.

active fire/hotspots↗
NASA NTRS2005

Monitoring Eruptive Activity at Mount St. Helens with TIR Image Data

Thermal infrared (TIR) data from the MASTER airborne imaging spectrometer were acquired over Mount St. Helens in Sept and Oct, 2004, before and after the onset of recent eruptive activity. Pre-eruption data showed no measurable increase in surface temperatures before the first phreatic eruption on Oct 1. MASTER data acquired during the initial eruptive episode on Oct 14 showed maximum temperatures of similar to approximately 330 C and TIR data acquired concurrently from a Forward Looking Infrared (FLIR) camera showed maximum temperatures similar to approximately 675 C, in narrow (approximately 1-m) fractures of molten rock on a new resurgent dome. MASTER and FLIR thermal flux calculations indicated a radiative cooling rate of approximately 714 J/m(exp 2)/s over the new dome, corresponding to a radiant power of approximately 24 MW. MASTER data indicated the new dome was dacitic in composition, and digital elevation data derived from LIDAR acquired concurrently with MASTER showed that the dome growth correlated with the areas of elevated temperatures. Low SO2 concentrations in the plume combined with sub-optimal viewing conditions prohibited quantitative measurement of plume SO2. The results demonstrate that airborne TIR data can provide information on the temperature of both the surface and plume and the composition of new lava during eruptive episodes. Given sufficient resources, the airborne instrumentation could be deployed rapidly to a newly-awakening volcano and provide a means for remote volcano monitoring.

thermal emissions↗
DOE OSTI2016

Hanford Site Mule Deer Monitoring Report For Fiscal Year 2016

The U.S. Department of Energy, Richland Operations Office (DOE-RL) conducts ecological monitoring on the Hanford Site to collect and track data needed to ensure compliance with environmental laws, regulations, and policies governing DOE activities. Ecological monitoring data provide baseline information about the plants, animals, and habitats under DOE-RL stewardship at Hanford required for decision-making under the National Environmental Policy Act (NEPA) and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The Hanford Site Comprehensive Land Use Plan (CLUP, USDOE 1999), which is the Environmental Impact Statement that evaluates the potential environmental impacts associated with implementing a comprehensive land-use plan for the Hanford Site. This plan ensures that DOE-RL, its contractors, and other entities conduct activities on the Hanford Site in compliance with NEPA.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Active Members to Establish On-Orbit Modal Data for Modal Correlation

The paper presents an approach to experimentally determine the modal sensitivity derivitives with respect to physical parameters of a structure in space or on the ground. The information experimentally validates the Jacobian used to update the analytical model to correlate with the experimental modal data. The approach is applicable to Adaptive Structures and utilizes active members. For verification of the approach, numerical simulations of a 4.5 meter diameter truss structure and experimental verification plan and progress are presented.

space structures modal analysis dynamic models ada↗
NASA NTRS2020

CyberGAN: Generating High-fidelity Cybersecurity Data With Generative Adversarial Networks

Machine learning for cyber defense offers the promise of detecting adversarial activity against the ground data systems managing critical space assets. A fundamental challenge facing machine learning research in cybersecurity is the lack of high-fidelity, shareable datasets for robust evaluation and testing of machine learning-based solutions. High-fidelity, real-world datasets are necessary for reliable benchmarking of nominal system behavior and malicious activity. Unfortunately, such realistic datasets of both nominal and adversarial activity are rarely shared publicly by data owners due to security and privacy concerns. Besides, the available adversarial data is sparse, which makes training models on malicious activity much harder. This situation has impeded and continues to impede the research and successful adoption of machine learning methods for cyber defense. Researchers have dealt with this problem by generating data within a low-fidelity lab environment, using classified and thus unshareable datasets, or downloading low-fidelity public datasets made available by others. We propose an innovative solution to the problem by employing machine learning methods to generate high-fidelity data. Specifically, we propose the use of Generative Adversarial Networks (GANs) to generate high-fidelity data for cybersecurity purposes. GANs have found successful image processing and natural language applications, but have not yet been investigated for cyber data generation. Our proposed approach first involves training the `discriminator' network of the GAN with a sample of real-world data consisting of malicious and nominal samples. We then use the `generator' network to generate new high-fidelity data samples consisting of an appropriate mix of malicious and nominal activity. We demonstrate applications of our architecture by generating high-fidelity cybersecurity data containing both malicious and nominal samples. We thoroughly evaluate the fidelity of our generated data using heuristics and evaluate its usefulness for machine learning applications using three different datasets. Overall, our approach results in high-fidelity, shareable datasets.

Zhang, Yuening↗
NASA NTRSDate not supplied

Using OPeNDAP In The Cloud to Connect NASA Data Centers and Support Open Data Access

NASA DAACs (Distributed Active Archive Centers), including the Goddard Earth Sciences Data Information and Services Center (GES DISC), are currently transitioning from on-premises servers to a shared Earthdata Cloud in order to build more interoperability, cross-collaboration, and streamlined services between their data centers. Migrating its on-premises OPeNDAP service to the cloud is a critical component of making this interconnectedness between NASA DAACs possible. To improve their cloud services, GES DISC is leveraging open-source platforms like Github to collect user feedback, create use cases, and develop resources to enable real-time learning for users about OPeNDAP in the cloud. This presentation gives an overview of the OPeNDAP in the cloud, resources developed to access this service, and considerations for improved user guidance and experience to further support NASA's commitment to the Open-Source Science Initiative (OSSI).

Christopher Battisto↗
NASA NTRS2007

Prediction of Geomagnetic Activity and Key Parameters in High-latitude Ionosphere

Prediction of geomagnetic activity and related events in the Earth's magnetosphere and ionosphere are important tasks of US Space Weather Program. Prediction reliability is dependent on the prediction method, and elements included in the prediction scheme. Two of the main elements of such prediction scheme are: an appropriate geomagnetic activity index, and an appropriate coupling function (the combination of solar wind parameters providing the best correlation between upstream solar wind data and geomagnetic activity). We have developed a new index of geomagnetic activity, the Polar Magnetic (PM) index and an improved version of solar wind coupling function. PM index is similar to the existing polar cap PC index but it shows much better correlation with upstream solar wind/IMF data and other events in the magnetosphere and ionosphere. We investigate the correlation of PM index with upstream solar wind/IMF data for 10 years (1995-2004) that include both low and high solar activity. We also have introduced a new prediction function for the predicting of cross-polar-cap voltage and Joule heating based on using both PM index and upstream solar wind/IMF data. As we show such prediction function significantly increase the reliability of prediction of these important parameters. The correlation coefficients between the actual and predicted values of these parameters are approx. 0.9 and higher.

Khazanov, George V.↗
DOE OSTI2020

Active Learning for Anomaly Detection in Environmental data

Due to the growing amount of data from in-situ sensors in environmental monitoring, it becomes necessary to automatically detect anomalous data points. Nowadays, this is mainly performed using supervised machine learning models, which need a fully labelled data set for their training process. However, the process of labelling data is typically cumbersome and, as a result, a hindrance to the adoption of machine learning methods for automated anomaly detection. In this work, we propose to address this challenge by means of active learning. This method consists of querying the domain expert for the labels of only a selected subset of the full data set. We show that this reduces the time and costs associated to labelling while delivering the same or similar anomaly detection performances. Finally, we also show that machine learning models providing a nonlinear classification boundary are to be recommended for anomaly detection in complex environmental data sets.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

Responsibilities and practical limitations in the operation of an astronomical data center

The operation of an astronomical data center requires that many decisions be made concerning the handling of the astronomical catalogs and data distributed. Should a data center be, as Wilkins (1977) described it, passive, in that catalogs and data are collected and distributed blackbox-wise upon request, or should a data center be active and have experts in various fields to scrutinize, correct, reformat, and document data where necessary. These questions will be addressed and illustrated by describing the current operations and future goals of the Astronomical Data Center at NASA/GSFC.

Warren, W. H., Jr.↗
NASA NTRS2012

Active Oxidation of a UHTC-Based CMC

The active oxidation of ceramic matrix composites (CMC) is a severe problem that must be avoided for multi-use hypersonic vehicles. Much work has been performed studying the active oxidation of silicon-based CMCs such as C/SiC and SiC-coated carbon/carbon (C/C). Ultra high temperature ceramics (UTHC) have been proposed as a possible material solution for high-temperature applications on hypersonic vehicles. However, little work has been performed studying the active oxidation of UHTCs. The intent of this paper is to present test data indicating an active oxidation process for a UHTC-based CMC similar to the active oxidation observed with Si-based CMCs. A UHTC-based CMC was tested in the HyMETS arc-jet facility (or plasma wind tunnel, PWT) at NASA Langley Research Center, Hampton, VA. The coupon was tested at a nominal surface temperature of 3000 F (1650 C), with a stagnation pressure of 0.026 atm. A sudden and large increase in surface temperature was noticed with negligible increase in the heat flux, indicative of the onset of active oxidation. It is shown that the surface conditions, both temperature and pressure, fall within the region for a passive to active transition (PAT) of the oxidation.

Glass, David E.↗
NASA NTRS2017

Solar Magnetic Activity and Solar-Stellar Connections

Prediction of solar magnetic activity on various temporal scales is a fundamental element of space weather, which requires a wide range of theoretical and observational expertise in solar phenomena from the deep interior to the corona. Historical observations have revealed many features of cyclic variations of the solar activity; but these data are dramatically insufficient to draw a physical picture of global magnetic field evolution. New observational data, currently available from space missions and ground-based observatories, provide us with detailed information about solar dynamics and magnetism. However, because of the relatively short duration of data series and the great variety of data types and quality, it is challenging to assimilate these data in theoretical models and make reliable forecasts. The recent unexpectedly weak solar activity cycles, as well as observations of rotational and magnetic topology transitions in solar-type stars, suggest that the Sun and its magnetic dynamo are currently in a very interesting evolutionary stage. This could relate to the difficulty in getting a model of the Sun to produce solar-like – rather than anti-solar-like – differential rotation, to reproduce the rotation profile obtained from helioseismology, and to predict solar activity cycles.

magnetic↗