Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

A parameterization of the depth of the entrainment zone

A theory of the parameterization of the entrainment zone depth has been developed based on conservation of energy. This theory suggests that the normalized entrainment zone depth is proportional to the inverse square root of the Richardson number. A comparison of this theory with atmospheric observations indicates excellent agreement. It does not adequately predict the laboratory data, although it improves on parcel theory, which is based on a momentum balance.

Boers, Reinout↗

Steady-state thermal-solutal diffusion in a float zone

A model for a float zone in a thin vertical sheet is used to study the formation of the zone configuration for both pure and binary systems of Si and GeGa. Equations describing the steady two-dimensional diffusion of solute in the melt and diffusion of heat in the feed material and the product crystal are presented. The material properties, asymptotic solutions for the temperature and concentration profiles, and melting, solidifying, and melt/gas interfacial shapes are determined in the small aspect ratio limit.

Young, G. W.↗

Origin of zoned fine-grained inclusions in the Allende meteorite

The mineral and bulk compositions in the three zones of the fine-grained Ca-Al-rich inclusion in the Allende meteorite are studied. Mineral analyses for the inclusions are presented and the principle mineral composition for the three zones of the inclusions are described. The nature of the alteration and the physical and chemical environment which caused the three-fold zonation are examined. An alteration and origin of zonation for the Allende inclusions are proposed. It is noted that the fine-grained inclusions display alteration processes such as Ca-Fe-silicate condensation and characteristics of the primary inclusion such as different rim type.

Mcgurie, Anne V.↗

Three-Zone Programmable Temperature Controller

Microprocessor-based controller regulates electrical power supplied to heater in each zone of three-zone directional-solidification furnace. Intended primarily for use in microgravity experiments aboard KC-135 airplane, controller also used on ground. Offers advantage of low electrical noise and consequent minimal interference with low-level signals put out by thermocouples and other sensors used in experiments. Achieved by heating with direct (instead of alternating) current and not pulsing heating current.

Smith, Guy A.↗

Analysis of radar images of the active volcanic zone at Krafla, Iceland: The effects of look azimuth biasing

The geomorphic expression of Mid-Ocean-Ridge (MOR) volcanism in a subaerial setting occurs uniquely on Earth in Iceland, and the most recent MOR eruptive activity has been concentrated in the Northeastern Volcanic Zone in an area known as Krafla. Within the Krafla region are many of the key morphologic elements of MOR-related basaltic volcanism, as well as volcanic explosion craters, subglacial lava shields, tectonic fissure swarms known as gjar, and basaltic-andesite flows with well developed ogives (pressure-ridges). The objective was to quantify the degree to which the basic volcanic and structural features can be mapped from directional SAR imagery as a function of the look azimuth. To accomplish this, the current expression of volcanic and tectonic constructs was independently mapped within the Krafla region on the E, W, and N-looking SAR images, as well as from SPOT Panchromatic imagery acquired in 1987. The initial observations of the E, W, and N images indicates that fresh a'a lava surfaces are extremely radar bright (rough at 3 cm to meter scales) independent of look direction; this suggests that these flows do not have strong flow direction related structures at meter and cm scales, which is consistent with typical Icelandic a'a lava surfaces in general. The basic impression from a preliminary analysis of the effects of look azimuth biasing on interpretation of the geology of an active MOR volcanic zone is that up to 30 percent of the diagnostic features can be missed at any given look direction, but that having two orthogonal look direction images is probably sufficient to prevent gross misinterpretation.

Garvin, J. B.↗

Seasonal and interannual variability of pigment concentrations across a California Current frontal zone

The seasonal and interannual variability of the latitudinal position of the California Current frontal zone was investigated by examining satellite images of phytoplankton pigment from the coastal-zone color scanner for the periods 1979-1983 and 1986. The pigment concentrations associated with the zonal front were also determined. A general seasonal cycle of pigment concentrations is was established. It was found that variations in the frontal structure are controlled primarily by changes in pigment concentration north of the front. Seasonal variations were found to be minimal south of the front, where pigment concentrations remain low throughout the spring, summer, and fall.

Thomas, A. C.↗

Energy stability of thermocapillary convection in a model of the float-zone crystal-growth process

Energy stability theory has been applied to a basic state of thermocapillary convection occurring in a cylindrical half-zone of finite length to determine conditions under which the flow will be stable. Because of the finite length of the zone, the basic state must be determined numerically. Instead of obtaining stability criteria by solving the related Euler-Lagrange equations, the variational problem is attacked directly by discretization of the integrals in the energy identity using finite differences. Results of the analysis are values of the Marangoni number below which axisymmetric disturbances to the basic state will decay, for various values of the other parameters governing the problem.

Shen, Y.↗

Issues associated with establishing control zones for international space operations

Cooperative missions in Earth orbit can be facilitated by developing a strategy to regulate the manner in which vehicles interact in orbit. One means of implementing such a strategy is to utilize a control zones technique that assigns different types of orbital operations to specific regions of space surrounding a vehicle. Considered here are issues associated with developing a control zones technique to regulate the interactions of spacecraft in proximity to a manned vehicle. Technical and planning issues, flight hardware and software issues, mission management parameter, and other constraints are discussed. Also covered are manned and unmanned vehicle operations, and manual versus automated flight control. A review of the strategies utilized by the Apollo Soyuz Test Project and the Space Station Freedom Program is also presented.

Nader, Blair A.↗

The mechanics of the South Iceland Seismic Zone

The mechanics of the South Iceland Seismic Zone is examined by means of boundary element modeling. The differences between the observed geometry of the major tectonically active features and that of a geometrically orthogonal ridge-transform system (which assumes that the upper part of the earth's crust is an elastic plate containing vertical cuts) are examined. It is suggested that north-south faults can accommodate transform deformation only if the faults are longer or more numerous than those observed so far. This is considered reasonable because earthquake surface rupture lengths are commonly less than the inferred fault length at depth. The South Iceland Seismic Zone is subject to sequences of large earthquake every 45-112 years. In comparing the seismic moment release derived from earthquake magnitudes with that predicted by the models, it is confirmed that the system of north-south faults can act as a transform fault.

Hackman, M. Christine↗

Programmable multi-zone furnace for microgravity research

In order to provide new furnace technology to accommodate microgravity research studies and commercial applications in material processes, research has been initiated on the development of the Programmable-Multi-zone Furnace (PMZF). The PMZF is described as a multi-user materials processing furnace facility that is composed of thirty or more heater elements in series on a muffle tube or in a stacked ring-type configuration and independently controlled by a computer. One of the aims of the PMZF project is to allow furnace thermal gradient profiles to be reconfigured without physical modification of the hardware by creating the capability of reconfiguring thermal profiles in response to investigators' requests. The future location of the PMZF facility is discussed; the preliminary science survey results and preliminary conceptual designs for the PMZF are presented; and a review of multi-zone furnace technology is given.

Rosenthal, Bruce N.↗

First epoch geodetic measurements with the Global Positioning System across the northern Caribbean plate boundary zone

The first geodetic survey across the northern Caribbean plate boundary zone with GPS was conducted in June 1986. Baseline vectors defined by the six-station regional GPS network ranged from 170 to 1260 km in length. Repeatability of independent daily baseline estimates was better than 8 mm plus 1.3 parts in 10 to the 8th of baseline length for horizontal components. The wet tropospheric path delay during the experiment was both high, sometimes exceeding 30 cm at zenith, and variable, sometimes exceeding 5 cm variation over several hours. Successful carrier phase cycle ambiguity resolution (bias fixing) could not be achieved prior to construction of a regional troposphere model. With optimum troposphere treatment and single-day orbital arcs, most biases on baselines were resolved up to about 550 km in length. With multiday orbital arcs most biases in the network were resolved regardless of baseline length. The results suggest that constraints on plate-boundary zone deformation in the Greater Antilles, and on the North America-Caribbean relative plate motion vector, can be obtained with a series of GPS experiments spanning less than 10 and 15 years, respectively.

Dixon, T. H.↗

Ku band airborne radar altimeter observations of marginal sea ice during the 1984 Marginal Ice Zone Experiment

Pulse-limited, airborne radar data taken in June and July 1984 with a 13.8-GHz altimeter over the Fram Strait marginal ice zone are analyzed with the aid of large-format aerial photography, airborne synthetic aperture radar data, and surface observations. Variations in the radar return pulse waveforms are quantified and correlated with ice properties recorded during the Marginal Ice Zone Experiment. Results indicate that the wide-beam altimeter is a flexible instrument, capable of identifying the ice edge with a high degree of accuracy, calculating the ice concentration, and discriminating a number of different ice classes. This suggests that microwave radar altimeters have a sensitivity to sea ice which has not yet been fully exploited. When fused with SSM/I, AVHRR and ERS-1 synthetic aperture radar imagery, future ERS-1 altimeter data are expected to provide some missing pieces to the sea ice geophysics puzzle.

Drinkwater, Mark R.↗

A comparison of radiation budgets in the Fram Strait marginal ice zone

Results are presented from calculations of radiation budgets for the sea-ice and the open-water regimes in the marginal ice zone (MIZ) of the Fram Strait, from measurements of surface irradiances and meteorological conditions made during the 1984 Marginal Ice Zone Experiment. Simultaneous measurements on either side of the ice edge allowed a comparison of the open-water and the sea-ice environments. The results show significant differences between the radiation budgets of the two regimes in the MIZ. The open water absorbed twice as much radiation as did the ice, and the mean cooling rate of the atmosphere over water was approximately 15 percent larger than that over ice. Calculated fluxes and atmospheric cooling rates were found to compare well with available literature data.

Francis, Jennifer A.↗

The mode III crack problem in bonded materials with a nonhomogeneous interfacial zone

The mode 3 crack problem for two bonded homogeneous half planes was considered. The interfacial zone was modelled by a nonhomogeneous strip in such a way that the shear modulus is a continuous function throughout the composite medium and has discontinuous derivatives along the boundaries of the interfacial zone. The problem was formulated for cracks perpendicular to the nominal interface and was solved for various crack locations in and around the interfacial region. The asymptotic stress field near the tip of a crack terminating at an interface was examined and it was shown that, unlike the corresponding stress field in piecewise homogeneous materials, in this case the stresses have the standard square root singularity and their angular variation was identical to that of a crack in a homogeneous medium. With application to the subcritical crack growth process in mind, the results given include mostly the stress intensity factors for some typical crack geometries and various material combinations.

Erdogan, F.↗

Stability and instability of thermocapillary convection in models of float-zone crystal growth

The energy-stability theory has been used to study the stability properties of thermocapillary convection in a half-zone model of the float-zone crystal-growth process. It is concluded that the energy theory provides a sufficient condition for stability to disturbances of arbitrary amplitude. Results of the computation of energy-stability limits are found to be in good agreement with experimentally measured bounds for oscillatory thermocapillary convection.

Neitzel, G. P.↗

Energy stability of thermocapillary convection in a model of the float-zone crystal-growth process. II - Nonaxisymmetric disturbances

Energy-stability theory has been applied to investigate the stability properties of thermocapillary convection in a half-zone model of the float-zone crystal-growth process. An earlier axisymmetric model has been extended to permit nonaxisymmetric disturbances, thus determining sufficient conditions for stability to disturbances of arbitrary amplitude. The results for nonaxisymmetric disturbances are compared with earlier axisymmetric results, with linear-stability results for a geometry with an infinitely long aspect ratio and with stability boundaries from recent laboratory experiments.

Neitzel, G. P.↗

Linear-stability theory of thermocapillary convection in a model of float-zone crystal growth

Linear-stability theory has been applied to a basic state of thermocapillary convection in a model half-zone to determine values of the Marangoni number above which instability is guaranteed. The basic state must be determined numerically since the half-zone is of finite, O(1) aspect ratio with two-dimensional flow and temperature fields. This, in turn, means that the governing equations for disturbance quantities will remain partial differential equations. The disturbance equations are treated by a staggered-grid discretization scheme. Results are presented for a variety of parameters of interest in the problem, including both terrestrial and microgravity cases.

Neitzel, G. P.↗

Heat transfer and fluid flow in floating-zone crystal growth with a mostly covered melt surface

Computer simulation was conducted to study a modified floating-zone crystal growth process, in which the melt surface is mostly covered with a heated ring. The growth of 6-mm diameter single crystals of NaNO3 was considered, and the effects of the following parameters were studied: (1) temperature of the ring, (2) growth rate, (3) surface tension-temperature coefficient of the melt, (4) thermal expansion coefficient of the melt, and (5) gravity. It was demonstrated that thermocapillary convection in the melt zone is reduced significantly in this modified process. The model was checked against the measured lengths of the meniscus near the growth front and axial temperature distribution in a growing crystal, and the agreement was good.

Lan, C. W.↗