Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIND PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Ascent air data system results from the space shuttle flight test program

The ascent air data system of the Space Shuttle consists of a simple biconic spike probe on the nose of the external tank. Pressure measurements were calibrated in a wind tunnel to obtain vehicle attitude and speed (relative to the air) and dynamic pressure. The wind tunnel test data analysis and the calibration are discussed in terms of test problems and calibration parameter formulation. The flight pressures are traced from telemetry data to final air data products. Analysis of the flight results showed that static pressure could not be accurately determined at the higher Mach numbers (above approx. 2.0). By replacing static pressure with data from a postflight estimated trajectory the ascent air data system performance met the user requirements. Lessons learned are enumerated, the most important being the need for a thorough systems integration effort.

Hillje, E. R.↗

Development of tunable high pressure CO2 laser for lidar measurements of pollutants and wind velocities

The problem of laser energy extraction at a tunable monochromatic frequency from an energetic high pressure CO2 pulsed laser plasma, for application to remote sensing of atmospheric pollutants by Differential Absorption Lidar (DIAL) and of wind velocities by Doppler Lidar, was investigated. The energy extraction principle analyzed is based on transient injection locking (TIL) at a tunable frequency. Several critical experiments for high gain power amplification by TIL are presented.

Levine, J. S.↗

The intrinsic magnetic field and solar-wind interaction of Mars

The Venus-like interaction between the solar wind and the atmosphere of Mars is examined. The bow shock and magnetosheath of Mars indicate the presence of an obstacle to the solar wind that is somewhat larger than the size of the planet and its observed ionosphere, and also relatively larger than the Venus obstacle under comparable conditions. The intrinsic magnetic field of Mars must be no greater than 1.5 x 10 exp 12 T/cu m, or about 0.0001 times as strong as that of the earth to produce an obstacle of such small size. At least for solar minimum conditions, like those prevailing at the time of the Viking Landers, the ionospheric plasma (thermal) pressure is insufficient to balance the incident solar-wind pressure by itself. The ion and electron temperatures in the Martian ionosphere indicate the presence of local horizontal magnetic fields and heat sources in excess of solar radiation alone.

Luhmann, J. G.↗

Local Atmospheric Response to an Open-Ocean Polynya in a High-Resolution Climate Model

Abstract In this paper the atmospheric response to an open-ocean polynya in the Southern Ocean is studied by analyzing the results from an atmospheric and oceanic synoptic-scale resolving Community Earth System Model (CESM) simulation. While coarser-resolution versions of CESM generally do not produce open-ocean polynyas in the Southern Ocean, they do emerge and disappear on interannual time scales in the synoptic-scale simulation. This provides an ideal opportunity to study the polynya’s impact on the overlying and surrounding atmosphere. This has been pursued here by investigating the seasonal cycle of differences of surface and air-column variables between polynya and nonpolynya years. The results indicate significant local impacts on turbulent heat fluxes, precipitation, cloud characteristics, and radiative fluxes. In particular, it is found that clouds over polynyas are optically thicker and higher than clouds over sea ice during nonpolynya years. Although the lower albedo of polynyas significantly increases the net shortwave absorption, the enhanced cloud brightness tempers this increase by almost 50%. Also, in this model, enhanced longwave radiation emitted from the warmer surface of polynyas is balanced by stronger downwelling fluxes from the thicker cloud deck. Impacts are found to be sensitive to the synoptic wind direction. The strongest regional impacts are found when northeasterly winds cross the polynya and interact with katabatic winds. Surface air pressure anomalies over the polynya are only found to be significant when cold, dry air masses strike over the polynya (i.e., in the case of southerly winds).

54 ENVIRONMENTAL SCIENCES↗

Brain Pressure Monitoring

A transducer originally used to measure air pressure in aircraft wind tunnel tests is the basis for a development important in diagnosis and treatment of certain types of brain damage. A totally implantable device, tbe intracranial pressure monitor measures and reports brain pressure by telemetry.

Source record↗

Results of a wind tunnel/flight test program to compare afterbody/nozzle pressures on a 1/12 scale model and an F-15 aircraft

In 1975 NASA Dryden Flight Research Facility received the No. 2 prototype F-15 aircraft from the USAF to conduct the F-15 Propulsion/Airframe Interactions Program. About the same time, NASA Langley Research Center acquired a 1/12 scale F-15 propulsion model, whose size made it suitable for detailed afterbody/nozzle static pressure distribution studies. Close coordination between Langley and Dryden assured identical orifice locations and nozzle geometries on the model and aircraft. This paper discusses the sequence of the test programs and how retesting the model after completion of the flight tests greatly increased the ability to match hardware and test conditions. The experience gained over the past decade from involvement in the program should prove valuable to any future programs attempting to match wind tunnel and flight test conditions and hardware.

Pendergraft, O. C., Jr.↗

Overview of VEGA Venus balloon in situ meteorological measurements

The VEGA balloons made in situ measurements of pressure, temperature, vertical wind velocity, ambient light, frequency of lightning, and cloud particle backscatter. Both balloons encountered highly variable atmospheric conditions, with periods of intense vertical winds occurring sporadically throughout their flights. Downward winds as large as 3.5 meters per second occasionally forced the balloons to descend as much as 2.5 kilometers below their equilibrium float altitudes. Large variations in pressure, temperature, ambient light level, and cloud particle backscatter (VEGA-1 only) correlated well during these excursions, indicating that these properties were strong functions of altitude in those parts of the middle cloud layer sampled by the balloons.

Sagdeev, R. Z.↗

Impact of GMI All-Sky Radiance Assimilation in the NASA GEOS Forecast System

The assimilation of cloud- and precipitation-affected ("all-sky") radiances has become an important focus of development at most numerical weather prediction centers. Efforts at the Global Modeling and Assimilation Office (GMAO) have focused on all-sky assimilation of GPM Microwave Imager (GMI) radiances, which became operational in the GEOS real-time production system in July 2018. Implementation of the all-sky capability required several upgrades to the GEOS hybrid 4D-EnVar assimilation infrastructure including the addition of control variables for cloud liquid, cloud ice, rain and snow, enhancements to the radiative transfer model, new hybrid background and observational error models, and modified quality control and bias correction procedures. This talk describes the impact of GMI all-sky radiance assimilation on GEOS analyses and forecasts as determined from examination of various metrics including statistics of background departures and analysis increments, forecast skill scores, and forecast sensitivity observation impact (FSOI) calculations. It is shown that in addition to the hydrometeors themselves, the initial wind, temperature and pressure fields all undergo significant dynamic adjustment in response to the analyzed cloud and precipitation features. Assimilation of GMI radiances leads to improved forecasts of lower tropospheric wind, temperature and humidity, especially in the tropics. The largest forecast improvements occur during the first 48 hours, with diminishing impact thereafter. However, combining GMI all-sky assimilation with improvements to the GEOS model physics as in the recent implementation of the real-time production system, extends these forecast improvements well in to the medium range. FSOI results based on a 24-hr moist global energy norm show that GMI radiances provide nearly uniform beneficial impact throughout the tropics, with more mixed impacts in the subtropics. While the overall impact of GMI is smaller than that of other, much more numerous microwave and hyperspectral infrared radiance types, its impact is among the largest of all radiance types on a per-observation basis.

Gelaro, Ron↗

THE EFFECT OF ELECTRON THERMAL PRESSURE ON THE OBSERVED MAGNETIC HELICITY IN THE SOLAR WIND

Statistical analysis of magnetic helicity spectra in the solar wind at 1 au is carried out. A large database of the solar wind intervals assembled from Wind spacecraft magnetic and plasma data is used. The effect of the electron thermal pressure on the wavenumber position of the helicity signature, i.e., the peak of the spectrum, is studied. The position shows a statistically significant dependence on both the electron and proton pressures. However, the strongest dependence is seen when the two pressures are summed. These findings confirm that the generation of the magnetic helicity is associated with an increasing compressibility of the turbulent fluctuations at smaller kinetic scales. It is argued that instrumental artifacts do not contribute to the helicity signature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Joint Acceptance Attenuation Factor of Integrated Pressure with Unsteady Pressure-Sensitive Paint Measurements

The Unsteady Pressure-Sensitive Paint (uPSP) is widely used to measure the surface pressure of scaled models in wind tunnel tests. Compared to the conventional pressure transducers, uPSP has the advantage of high spatial resolution. With multiple high-speed Complementary Metal Oxide Superconductor (CMOS) cameras, the uPSP data collected with the camera pixels are mapped to the surface grid of the scaled model and converted to pressure. The shot noise is the dominant component of the noise in the uPSP measurement. The integrated pressure is usually computed on the grid nodes of a user-defined patch. The effect of shot noise is reduced in the integrated pressure on the patch; however, the measurement of the aerodynamic pressure may also be attenuated by the decorrelation of the flow pressure field being measured. This paper discusses the Joint Acceptance Attenuation Factor (JAAF) of the integrated pressure with uPSP measurements. The JAAF, a function of frequency, is defined as the ratio of the Power Spectral Density (PSD) of the integrated aerodynamic pressure on the patch to the average PSD of the aerodynamic pressure on the grid nodes of the patch. In this paper, the JAAF is investigated for the integrated pressure on rectangular patches, whose edges are defined in the direction along the streamline or across the streamline. Based on the assumption that the surface pressure field can be described by the Corcos model, the closed-form formulas to compute the JAAFs of the integrated pressure on the discrete grid nodes of a rectangular patch and over the continuous area of a rectangular patch are derived respectively. It is shown that the JAAF of the integrated pressure over the continuous area of a rectangular patch is the limit of that on discrete nodes of the rectangular patch when the number of nodes in each row or column goes to infinity. The closed-form formulas of the JAAF derived in this paper, with estimated parameters of the model, are verified with the measurements of the uPSP and the conventional pressure transducer collected in the Space Launch System Ascent Unsteady Aerodynamics Test at NASA Ames Research Center in November 2017. The closed-form formulas of the JAAF of the integrated pressure on the rectangular patches, based on the Corcos model, provide an efficient method to estimate the attenuation of integration by the decorrelation of the flow pressure field and set references for the comparison of the spectrum of the integrated uPSP measurements and the conventional pressure transducer measurements. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

Joint Acceptance Attenuation Factor of Integrated Pressure with Unsteady Pressure-Sensitive Paint Measurements

The Unsteady Pressure-Sensitive Paint (uPSP) is widely used to measure the surface pressure of scaled models in wind tunnel tests. Compared to the conventional pressure transducers, uPSP has the advantage of high spatial resolution. With multiple high-speed Complementary Metal Oxide Superconductor (CMOS) cameras, the uPSP data collected with the camera pixels are mapped to the surface grid of the scaled model and converted to pressure. The shot noise is the dominant component of the noise in the uPSP measurement. The integrated pressure is usually computed on the grid nodes of a user-defined patch. The effect of shot noise is reduced in the integrated pressure on the patch; however, the measurement of the aerodynamic pressure may also be attenuated by the decorrelation of the flow pressure field being measured. This paper discusses the Joint Acceptance Attenuation Factor (JAAF) of the integrated pressure with uPSP measurements. The JAAF, a function of frequency, is defined as the ratio of the Power Spectral Density (PSD) of the integrated aerodynamic pressure on the patch to the average PSD of the aerodynamic pressure on the grid nodes of the patch. In this paper, the JAAF is investigated for the integrated pressure on rectangular patches, whose edges are defined in the direction along the streamline or across the streamline. Based on the assumption that the surface pressure field can be described by the Corcos model, the closed-form formulas to compute the JAAFs of the integrated pressure on the discrete grid nodes of a rectangular patch and over the continuous area of a rectangular patch are derived respectively. It is shown that the JAAF of the integrated pressure over the continuous area of a rectangular patch is the limit of that on discrete nodes of the rectangular patch when the number of nodes in each row or column goes to infinity. The closed-form formulas of the JAAF derived in this paper, with estimated parameters of the model, are verified with the measurements of the uPSP and the conventional pressure transducer collected in the Space Launch System Ascent Unsteady Aerodynamics Test at NASA Ames Research Center in November 2017. The closed-form formulas of the JAAF of the integrated pressure on the rectangular patches, based on the Corcos model, provide an efficient method to estimate the attenuation of integration by the decorrelation of the flow pressure field and set references for the comparison of the spectrum of the integrated uPSP measurements and the conventional pressure transducer measurements. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

Voltage-To-Frequency Converter For Pressure Calibration

Measurements of pressures on walls of wind tunnels and on surfaces of models in wind tunnels made with help of electronically scanned pressure-measurement (ESP) system. Voltage-to-frequency converter circuit, designed to convert 0- to 5-Vdc analog output voltage from high-line-pressure, low-differential-pressure standard to required frequency range. Enables selection of wider variety of high-accuracy pressure standards to enhance accuracy of measurement of ESP instrumentation while requiring little modification of manufacturer's system and no modification of operating software of system. Useful primarily in wind-tunnel instrumentation and readily adaptable to commercial instruments currently in use.

Sealey, Bradley S.↗

The origin of stellar winds - Subatmospheric nonthermal storage modes versus radiation pressure

Most current models of matter-flux in hot stars place its origin in radiation pressure, and then model the flow explicitly to produce no chromosphere-corona. Our model of the stellar atmosphere as a transition zone between stellar interior and interstellar medium places the origin of matter-flux, chromosphere-corona, and spectral 'emission classes' in subatmospheric nonthermal kinetic energy storage, equally for all stars, hot or cold. Current observations of both hot and cold stars suggest chromospheres to be a universal phenomenon, correlated with matter-fluxes, and enhanced in 'emission-class' stars. To clarify the difference between the two kinds of models above, we reformulate the wind-tunnel analogy to stellar winds, suggesting that stars satisfy an 'imperfect,' rather than 'perfect,' such model; i.e., transonic shocks occur before the throat, corresponding to an imposed outward velocity in the storage section, or subatmosphere. We then investigate the stability of an arbitrary stellar atmosphere, hot or cold, to suggest a cause for such an outward subatmospheric velocity.

Cannon, C. J.↗

Interaction of the solar wind with the neutral component of the interstellar gas.

A model is constructed to represent the interaction between the solar wind and the neutral component of the interstellar gas. It is found that the neutral gas has several important effects on the solar-wind expansion beyond the orbit of the earth and that it should be possible to infer the presence of the neutral gas from observations of the solar wind made by a space probe traveling into the outer solar system. The effects include a deceleration and heating of the supersonic solar wind, a cooling of and pressure reduction in the subsonic solar wind, and a tightening of the spiral magnetic field in the supersonic solar wind.

Holzer, T. E.↗

Wind Erosion and Dune Formation on High Frozen Bluffs

Frost penetration increases upslope on barren, windswept bluffs in cold environments. Along the south shore of Lake Superior, near the brow of 100 m high bluffs it typically exceeds 5 m. Frost increases the shear strength of damp sand to a level comparable to that of concrete, making winter slopes highly stable despite undercutting by waves and ground-water sapping along the footslope. Sublimation of interparticle ice in the slope face increases with wind speed and lower vapor pressures. The cold and dry winter winds of Lake Superior ablate these slopes through loss of binding ice. Wind erosion rates, based on measurements of sand accumulation on the forest floor downwind of the brow, show most airborne sand falls out within several meters of the brow, forming a berm 1 to 3 m high after many years. The spatial pattern of sand deposition, however, varies considerably over distances of several hundred meters along the top bluffs in response to frost conditions and the build-up of gravel lag on the slope face, sand exposure from mass movements, and local aerodynamics of the crest slope. The formation of perched sand dunes in the Great Lakes region is clearly related to wind erosion of sand from high bluffs in winter. Broadly similar processes may operate on Mars.

Marsh, W. M.↗