Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WALTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Microstructure and phase evolution in the U-10Zr fuel investigated by in situ TEM heating experiments

The development of U-Zr metallic nuclear fuel for fast spectrum reactors is impacted by a lack of mechanistic understanding of the fuel behavior evolution under thermal irradiation conditions, despite previous works providing substantial fuel performance data. This work uses in-situ transmission electron microscopy heating experiments to study phase and microstructural evolution in several unirradiated U-10Zr specimens during rapid heating ramps (from room temperature to 1000 °C). The starting a-U + bcc-(Zr, U) eutectic microstructure began to decompose above 600 °C. The decomposition initiated from the bcc (U,Zr) phase. Similar results were observed for all specimens even when fabricated by different routes (e.g., cold rolled or annealed). As a result, the impact of observed microstructure and phase evolutions at high temperatures on fuel fabrication and in-pile fuel transient test was also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Porosity, swelling, and composition evolution in high-burnup monolithic U-Mo fuel

The microstructural progression of very high-burnup (>8 × 10 21 fissions/cm 3 ) monolithic uranium-molybdenum (U-10wt.%Mo) was analyzed, providing crucial insights into the behavior of post-recrystallized nuclear fuel, where scant data exists. Three focused ion beam cuboids sourced from a fuel plate with varying local burnups of 8.86 × 10 21 , 9.05 × 10 21 , and 9.36 × 10 21 fissions/cm 3 were characterized. The porosity and composition of the samples were evaluated to characterize the evolution of the microstructure as a function of fission density and different locations on the fuel plate, while simultaneously isolating plate-specific parameters such as Zr diffusion barrier thickness, hot-isostatic-pressing conditions, enrichment, and reactor conditions. The porosity was segmented, and the three-dimensional distribution of the porosity was extrapolated from the two-dimensional segmentation. The composition was assessed and quantified using energy-dispersive X-ray spectroscopy areal mapping. The porosity fraction increased as a function of the burnup from 27.77±0.51, 35.12±1.54, and 37.71±0.44 % for 8.86 × 10 21 , 9.05 × 10 21 , and 9.36 × 10 21 fissions/cm 3 , respectively. When compared to literature, the porosity volume fraction plateaus at burnups greater than 6 × 10 21 fissions/cm 3 , while the pore size grows linearly as a function of fission density. The number of large pores increased in number density as a function of burnup, while the smallest pores (<0.3 µm) increased up to 9.05 × 10 21 fissions/cm 3 , followed by a decrease at 9.36 × 10 21 fissions/cm 3 . The delamination and cracking in the fuel plate propagated through an interconnected porosity sublayer identified ∼5 µm from the diffusion barrier. The local swelling of the specimens was within or near the prediction bounds of the Robinson-Williams model for local swelling. The fission products, strontium, barium, cerium, and cesium, precipitated into the pores, while neodymium accumulated adjacent to the pores. Furthermore, these findings have direct implications for the development of fuel performance codes and the accurate documentation of the microstructure evolution in high burnup U-Mo, thus enhancing the safety and efficiency of nuclear fuel usage.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A critical review of the history of fabricating monolithic U-Mo fuel plates

The fabrication of monolithic uranium-molybdenum alloy fuels, specifically those developed for high-performance research and test reactors, began in the early 2000s. The primary fuel form consists of uranium alloyed with 10-wt% molybdenum in a thin foil coated with zirconium and encapsulated in aluminum-6061 cladding. Over the years, the process has evolved with different types of casting, heat treatments, rolling schedules, and cladding applications. This review examines the history of these fabrication processes and their impact on microstructure and fuel-swelling performance. Even though various fabrication methods were used, we found little correlation between fabrication variation and fuel swelling. This insensitive relationship between fabrication variation and fuel swelling is primarily due to inhomogeneous microstructures that formed during casting and grain refinement that occurred during rolling. We conclude that the fabrication processes we examined produced similar microstructures, indicating that the fuel microstructure is somewhat insensitive to the fabrication parameters evaluated. However, the relatively small amount of historic data, such as those for grain sizes, limited this analysis. More recently fabricated materials, such as those from ongoing irradiation experiment, Mini-Plate-1 and Mini-Plate-2, were also excluded from this analysis and are intended to be reviewed separately. The findings, that fuel microstructure is somewhat insensitive to the fabrication parameters, do not imply that any fabrication method is acceptable, given the uncertainties in data and fuel-swelling observations. For example, only arc melting and vacuum induction melting casting processes were previously explored in the historic fabrication efforts. In conclusion, the findings should not be extrapolated to other casting processes.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Proton-regulated alcohol oxidation for high-capacity ketone-based flow battery anolyte

Redox flow batteries have a unique architecture that potentially enables cost-effective long-duration energy storage to address the intermittency introduced by increased renewable integration for the decarbonization of the electric power sector. Targeted molecular engineering has demonstrated electrochemical reversibility in natively redox-inactive ketone molecules in aqueous electrolytes. Yet, the kinetics of fluorenone-based flow batteries continue to be limited by slow alcohol oxidation. We show how strategically designed proton regulators can accelerate alcohol oxidation and thus enhance battery kinetics. Fluorenone-based flow batteries with the organic additive ß-cyclodextrin demonstrate enhanced rate capability, high capacity, and long cycling. This study opens a new avenue to improve the kinetics of aqueous organic flow batteries by modulating the reaction pathway with a homogeneous catalyst.

25 ENERGY STORAGE↗

Ir(III)-Naphthoquinone complex as a platform for photocatalytic activity

Inspired by the primary events that take place in Photosystem II (PSII), we designed and synthesized a heteroleptic Ir(III) complex featuring an attached naphthoquinone (NQ) as an electron transfer (ET) auxiliary reminiscent of the plastoquinone electron acceptor in PSII. In this design, NQ is covalently attached to the 2,2'-bipyridyl (bpy) ligand of [Ir(dF(CF 3 )ppy) 2 (bpy)][PF 6 ], (dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine). Following excitation of the photocatalyst ([Ir(dF(CF 3 )ppy) 2 (bpy-NQ)][PF 6 ]), reduced NQ (NQ •– ) was observed in transient absorption spectroscopy. Here, this novel catalyst has potential applications in oxidative and reductive photocatalytic processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Line Intensities for the v1, v3, and v1 + v3 Bands of 34SO2

Using both high resolution (0.0018 cm-1) and medium resolution ( 0.112 cm-1) Fourier transform spectra of an enriched 34S (95.3%) sample of sulfur dioxide it has been possible to accurately measure a large number of individual line intensities for some of the strongest of the SO2 bands, i.e. ν1, ν3 and ν1+ν3. . These intensities were least squares fitted using a theoretical model which takes into account the vibration-rotation interactions linking the upper energy levels where needed, and, in this way, expansions of the various transition moment operators were determined. The Hamiltonian parameters determined in previous analyses [Lafferty WJ, Flaud J.-M., Sams R.L., Ngom El H A. High resolution analysis of the rotational levels of the (000), (010), (100), (001),(020), (110) and (011) vibrational states of 34S16O2, J. Mol. Spectrosc. (2008), doi:10.1016/j.jms.2008.06.013; Lafferty WJ, Flaud J-M, Ngom El H A, Sams, L. 34S16O2: High resolution analysis of the (030), (101),(111), (002) and (201) vibrational states: Determination of equilibrium rotational constants of sulfur dioxide and anharmonic vibrational constants. J Mol Spectrosc, submitted ] together with these moments were then used to generate synthetic spectra for the bands studied and their corresponding hot bands providing one with an extensive picture of the absorption spectrum of 34SO2 in the spectral domains, 8.7, 7.4 and 4 μm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The layered metal Ti{sub 2}PTe{sub 2}

Crystals of Ti{sub 2}PTe{sub 2} have been synthesised by chemical vapour transport. Ti{sub 2}PTe{sub 2} crystallises, isostructural to the mineral tetradymite (Bi{sub 2}STe{sub 2}), in the space group R3-bar m with unit-cell parameters a=3.6387(2) A and c=28.486(2) A for the hexagonal setting. In the structure, layers of isolated phosphide and telluride anions form an ordered close sphere-packing with titanium cations filling two-thirds of the octahedral voids. From XANES fluorescence, the presence of Ti{sup 4+} is clearly established. In accordance with the ionic formula (Ti{sup 4+}){sub 2}(P{sup 3-})(Te{sup 2-}){sub 2}(e{sup -}) metallic conductivity ({rho}=40 {mu}{omega} cm at 300 K) and nearly temperature-independent paramagnetism are found. The electronic band structure shows bands of titanium states crossing the Fermi level in directions corresponding to the ab-plane and a band gap along the c-axis. - Graphical abstract: Crystal structure of Ti{sub 2}PTe{sub 2} with stacking sequence of the hexagonal layers of anions and cations. Highlighted in red is the octahedral coordination of phosphorus by titanium, and in grey the octahedral coordination of titanium by phosphorus and tellurium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical bonding analysis and properties of La{sub 7}Os{sub 4}C{sub 9}-A new structure type containing C- and C{sub 2}-units as Os-coordinating ligands

The new ternary carbide La{sub 7}Os{sub 4}C{sub 9} was prepared by argon arc-melting of the elements followed by subsequent heat treatment at 900 deg. C for 250 h. The compound crystallizes monoclinic, in the space group C2/m (a=1198.5(2) pm, b=542.0(1) pm, c=1196.2(2) pm, {beta}=111.04(1){sup o}, V=725.2(2)x10{sup 6} pm{sup 3}, Z=2). The structure was determined from single crystal X-ray diffraction data and refined to a residual of R{sub 1}=0.02 (wR{sub 2}=0.03) for 4812 unique reflections and 64 variable parameters. Electrical resistivity and magnetic susceptibility measurements characterize the compound as a Pauli-paramagnetic metal. The crystal structure contains bridging C- and terminal C{sub 2}-units as Os-coordinating ligands, thereby forming polyanions {sub {infinity}}{sup 1}[Os{sub 4}(C{sub 2}){sub 2}C{sub 5}] running along the [101] direction. The polyanions are composed of alternating Os(C{sub 2})C{sub 2} and OsC{sub 3} units with the transition metal in distorted trigonal planar coordination. Charge compensation is ensured by La cations which are situated in-between the polyanions. The carbon-carbon bond (131 pm) within the C{sub 2} pairs is slightly shorter than the value of a common C-C double bond, and is discussed on the basis of COHP curves on the one side, and with ELI-D and electron density distributions on the other side. The method of partial ELI-D decomposition is shown to be well suited for the characterization of separated DOS structures in terms of chemical bonding signatures provided by ELI-D. The Os-La interactions are shown to be of a polar multicenter-bonding type with Os playing the role of the electron donor. Compared to an acetylide the C{sub 2} species were found to possess a significantly reduced bond order and an enhanced number of electrons in lone pair type spatial regions. This type of species cannot be simply classified in terms of model pictures such as C{sub 2}{sup 2-} and C{sub 2}{sup 4-}, respectively. - Graphical Abstract: Polar multicenter Os-La bonding in the compound La{sub 7}Os{sub 4}C{sub 9} is discussed in position space from a combined analysis of the electron localizability indicator (ELI-D) and the electron density. The picture shows five electron density basins (gray translucent) for atom types Os (green spheres) and La (red spheres) and only those parts (in blue colour) of 4 Os-La multicenter ELI-D basins, which are intersected by the electron density basins displayed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Actinide incorporation in a zirconia based pyrochlore (Nd{sub 1.8}An{sub 0.2})Zr{sub 2}O{sub 7+x} (An=Th, U, Np, Pu, Am)

Actinides (thorium, uranium, neptunium, plutonium, and americium) were infiltrated into a porous Nd{sub 1.8}Zr{sub 2}O{sub 6.7} matrix, prepared by gel-supported precipitation. (Nd{sub 1.8}An{sub 0.2})Zr{sub 2}O{sub 7+x} pyrochlores were formed after sintering in Ar/H{sub 2} and the pyrochlore structure remains during oxidation at 800 deg. C in air. X-ray diffraction reveals a linear relationship between the pyrochlore lattice parameter and the ionic radii of the actinides. EXAFS measurements on actinide L{sub 3}-edge show a split shell of nearest neighbour oxygen atoms similar to that surrounding of Nd. The actinide-oxygen bond distances decrease with the actinide ionic radii, which verifies that these actinides adopt the Nd site in the (Nd{sub 1.8}An{sub 0.2})Zr{sub 2}O{sub 7+x} pyrochlore. The oxidation susceptibility of Np is related to the availability of oxygen vacancies and in contrast to stabilised zirconia Np(V) can be obtained in zirconia based pyrochlore. - Graphical abstract: Nd{sub 1.8}An{sub 0.2})Zr{sub 2}O{sub 7+x} pyrochlore lattice parameter depending on the actinide, La, and Nd ionic radii in eightfold coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tb/Na tobermorite: Thermal behaviour and high temperature products

By heating a sample of Tb/Na tobermorite we obtained a phase which was identified through its X-ray diffraction (XRD) pattern, as terbium silicate apatite. Subsequently this compound has been directly prepared by solid state reaction and we carried out a structural refinement from XRD data in space group P6{sub 3}/m obtaining cell parameters a=9.39199(4) A and c=6.84041(5) A. Terbium silicate apatite heated in melted NaF led to Tb{sub 4}O{sub 7} crystals. - Graphical Abstract: By heating over 900 deg. C Tb/Na tobermorite a terbium silicate apatite was obtained. The same product has been independently prepared and structurally characterized from powder diffraction data. Attempts of crystallizing terbium silicate apatite from melted NaF led to Tb{sub 4}O{sub 7} crystals.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, crystal structure, and magnetic properties of a novel organo-templated iron(III) borophosphate: (C{sub 3}H{sub 12}N{sub 2})Fe{sup III} {sub 6}(H{sub 2}O){sub 4}[B{sub 4}P{sub 8}O{sub 32}(OH){sub 8}]

The organo-templated iron(III) borophosphate (C{sub 3}H{sub 12}N{sub 2})Fe{sup III} {sub 6}(H{sub 2}O){sub 4}[B{sub 4}P{sub 8}O{sub 32}(OH){sub 8}] was prepared under mild hydrothermal conditions (at 443 K) and the crystal structure was determined from single crystal X-ray data at 295 K (monoclinic, P2{sub 1}/c (No. 14), a=5.014(2) A, b=9.309(2) A, c=20.923(7) A, beta=110.29(2){sup o}, V=915.9(5) A{sup 3}, Z=2, R1=0.049, wR2=0.107 for all data, 2234 observed reflections with I>2sigma(I)). The title compound contains a complex inorganic framework of borophosphate trimers [BP{sub 2}O{sub 8}(OH){sub 2}]{sup 5-} together with FeO{sub 4}(OH)(H{sub 2}O)- and FeO{sub 4}(OH){sub 2}-octahedra forming channels with ten-membered ring apertures in which the diaminopropane cations are located. The magnetization measurements confirm the Fe(III)-state and show an antiferromagnetic ordering at T{sub N}{approx}14.0(1) K. - Graphical abstract: The complex inorganic open-framework of (C{sub 3}H{sub 12}N{sub 2})Fe{sup III} {sub 6}(H{sub 2}O){sub 4}[B{sub 4}P{sub 8}O{sub 32}(OH){sub 8}] consists of borophosphate trimers and iron(III) coordination octahedra arranged to form channels with ten-membered ring apertures in which the organic 1,3-diaminopropane cations are located.

36 MATERIALS SCIENCE↗

The polar mixed-valent lanthanum iron(II, III) sulfide La{sub 3}Fe{sub 2-{delta}}S{sub 7}: Synthesis, crystal and electronic structure, {sup 57}Fe Moessbauer spectra, magnetic susceptibility and electrical resistivity

La{sub 3}Fe{sub 2-{delta}}S{sub 7} (delta=0.042(6)) was synthesized through a reaction of the elements in a LiCl/KCl flux at 970 K, and its structure was determined by single-crystal X-ray diffraction. The compound crystallizes in the polar hexagonal space group P6{sub 3} with a=10.1906(6), c=5.9543(4) A and Z=2, and adopts the Ce{sub 6}Al{sub 10/3}S{sub 14} structure type. The structure contains both octahedral and tetrahedral iron sites: one-dimensional rods of face-sharing FeS{sub 6} octahedra run along the 6{sub 3} screw axis of the cell; FeS{sub 4} tetrahedra, all pointing in the same direction, are stacked along the threefold rotation axes. The iron-centered polyhedra are linked by lanthanum atoms, which are coordinated by [7+1] sulfur atoms in a bicapped trigonal prismatic arrangement. {sup 57}Fe Moessbauer spectroscopy confirms that Fe{sup III} and Fe{sup II} cations occupy the tetrahedral and octahedral iron sites, respectively. Magnetic susceptibility data indicate an antiferromagnetic transition at T{sub N}{approx}155 K. Density functional band structure calculations within the local density approximation reveal two covalent Fe-S subsystems within the compound that mix only weakly. A large anisotropy is indicated by bands that disperse predominantly along the hexagonal axis. The electronic band structure suggests pseudo-one-dimensional metallic conductivity along the rods of face-sharing FeS{sub 6} octahedra. However, due to the defects on the Fe{sup II} positions, La{sub 3}Fe{sub 2-{delta}}S{sub 7} shows an activated conducting behavior. - Graphical Abstract: Rods of face-sharing [Fe{sup II}S{sub 6}]-octahedra and [Fe{sup III}S{sub 4}]-tetrahedra, all pointing in the same direction, dominate the polar structure. Vacancies in the octahedral Fe positions downgrade one-dimensional metallic conductivity to an activated semi-conducting behavior.

36 MATERIALS SCIENCE↗

Structure-composition sensitivity in 'Metallic' Zintl phases: A study of Eu(Ga{sub 1-x}Tt{sub x}){sub 2} (Tt=Si, Ge, 0<=x<=1)

Two isoelectronic series, Eu(Ga{sub 1-x}Tt{sub x}){sub 2} (Tt=Si, Ge, 0<=x<=1), have been synthesized and characterized by powder and single-crystal X-ray diffraction, physical property measurements, and electronic structure calculations. In Eu(Ga{sub 1-x}Si{sub x}){sub 2}, crystal structures vary from the KHg{sub 2}-type to the AlB{sub 2}-type, and, finally, the ThSi{sub 2}-type structure as x increases. The hexagonal AlB{sub 2}-type structure is identified for compositions 0.18(2)<=x<0.70(2) with Ga and Si atoms statistically distributed in the polyanionic 6{sup 3} nets. As smaller Si atoms replace Ga atoms while the number of valence electrons increases, the lattice parameters, unit cell volumes, and Ga-Si distances in this phase region decrease significantly. Although aspects of X-ray diffraction results suggest puckering of the 6{sup 3} nets for the Si-richest example of the AlB{sub 2}-type Eu(Ga{sub 1-x}Si{sub x}){sub 2}, the complete experimental evidence remains inconclusive. On the other hand, in Eu(Ga{sub 1-x}Ge{sub x}){sub 2}, six different structural types were observed as x varies. In addition to EuGa{sub 2} (KHg{sub 2}-type; space group Imma) and EuGe{sub 2} (own structure type, space group P3-barm1), the ternary phases studied show four different structures: the AlB{sub 2}-type for Ga-rich compositions; the YPtAs-type structure for EuGaGe; and two new structures, which are intergrowths of the YPtAs-type EuGaGe and EuGe{sub 2}, for Ge-rich compositions. These two Ge-rich phases include: (1) Eu(Ga{sub 0.45(2)}Ge{sub 0.55(2)}){sub 2} containing two YPtAs-type motifs of EuGaGe plus one EuGe{sub 2} motif; and (2) Eu(Ga{sub 0.40(2)}Ge{sub 0.60(2)}){sub 2} containing one YPtAs-type motif alternating with a split site at x=2/3 ,y=1/3 and z=0.4798(2) with ca. 50% site occupancy by Ga and Ge along the c-axis. Magnetic susceptibilities of three Eu(Ga{sub 1-x}Ge{sub x}){sub 2} compounds display Curie-Weiss behavior above ca. 100 K, and show effective magnetic moments indicative of divalent Eu with a 4f{sup 7} electronic configuration, consistent with. X-ray absorption spectra (XAS). Density of states (DOS) and crystal orbital Hamilton population (COHP) analyses, based on first principles electronic structure calculations, rationalize the observed homogeneity ranges of the AlB{sub 2}-type phases in both systems and the structural variations as a function of Tt content. - Abstract: A study of Eu(Ga{sub 1-x}Si{sub x}){sub 2} and Eu(Ga{sub 1-x}Ge{sub x}){sub 2} shows different compositional ranges for puckering of 6{sup 3} nets and, for the germanides, two new commensurately modulated superstructures. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation behaviour of uranium and neptunium in stabilised zirconia

Yttria stabilised zirconia (YSZ) based (Zr,Y,U)O{sub 2-x} and (Zr,Y,Np)O{sub 2-x} solid solutions with 6 and 20 mol% actinide were prepared with Y/Zr ratios ranging from 0.2 to 2.0 to investigate uranium and neptunium oxidation behaviour depending on the oxygen vacancies in the defect fluorite lattice. Sintering at 1600 deg. C in Ar/H{sub 2} yields a cubic, fluorite-type structure with U(IV) and Np(IV). Annealing (Zr,Y,U)O{sub 2-x} with Y/Zr=0.2 at 800 deg. C in air results in a tetragonal phase, whereas (Zr,Y,U)O{sub 2-x} with higher Y/Zr ratios and (Zr,Y,Np)O{sub 2-x} retain the cubic structure. XANES and O/M measurements indicate mixed U(V)-U(VI) and Np(IV)-Np(V) oxidation states after oxidation. Based on X-ray diffraction, O/M and EXAFS measurements, different oxidation mechanisms are identified for U- and Np-doped stabilised zirconia. In contrast to U, excess oxygen vacancies are needed to oxidise Np in (Zr,Y,Np)O{sub 2-x} as the oxidation process competes with Zr for oxygen vacancies. As a consequence, U(VI) and Np(V) can only be obtained in stabilised zirconia with Y/Zr=1 but not in YSZ with Y/Zr=0.2. - Graphical abstract: The O/U ratio in oxidised (Zr,Y,U)O{sub 2-x} depends on the Y/U ratio, whereas O/Np in (Zr,Y,Np)O{sub 2-x} correlates with the Y/(Zr+Np) ratio. This indicates that both Zr and Np compete for oxygen vacancies, which hinders the Np oxidation at low Y/Zr ratios. Display Omitted

36 MATERIALS SCIENCE↗

Water solubility in calcium aluminosilicate glasses investigated by first principles techniques

First-principles techniques have been employed to study the reactivity of water into a calcium aluminosilicate glass. In addition to the well known hydrolysis reactions Si-O-Si+H{sub 2}O{yields}Si-OH+Si-OH and Si-O-Al+H{sub 2}O{yields}Si-OH+Al-OH, a peculiar mechanism is found, leading to the formation of an AlO{sub 3}-H{sub 2}O entity and the breaking of Al-O-Si bond. In the glass bulk, most of the hydrolysis reactions are endothermic. Only a few regular sites are found reactive (i.e. in association with an exothermic reaction), and in that case, the hydrolysis reaction leads to a decrease of the local disorder in the amorphous vitreous network. Afterwards, we suggest that ionic charge compensators transform into network modifiers when hydrolysis occurs, according to a global process firstly suggested by Burnham in 1975. Our theoretical computations provide a more general model of the first hydrolysis steps that could help to understand experimental data and water speciation in glasses. -- Graphical Abstract: Reactivity within glass bulk: structures obtained after hydrolyses reactions (endothermic and exothermic processes) and mechanisms involving Si-OH, Al-OH, Si-OH-Al groups within aluminosilicates glasses (through ab initio molecular dynamics): formation of the Si-OH-Al entity coupled with an H exchange-Frederic Bouyer and Gregory Geneste. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled anion and cation ordering in Sr{sub 3}RFe{sub 4}O{sub 10.5} (R=Y, Ho, Dy) anion-deficientperovskites

The Sr{sub 3}RFe{sub 4}O{sub 10.5} (R=Y, Ho, Dy) anion-deficient perovskites were prepared using a solid-state reaction in evacuated sealed silica tubes. Transmission electron microscopy and {sup 57}Fe Moessbauer spectroscopy evidenced a complete A-cations and oxygen vacancies ordering. The structure model was further refined by ab initio structure relaxation, based on density functional theory calculations. The compounds crystallize in a tetragonal a{approx}2{radical}2a{sub p{approx}}11.3 A, c{approx}4c{sub p{approx}}16 A unit cell (a{sub p}: parameter of the perovskite subcell) with the P4{sub 2}/mnm space group. Oxygen vacancies reside in the (FeO{sub 5/4{open_square}3/4}) layers, comprising corner-sharing FeO{sub 4} tetrahedra and FeO{sub 5} tetragonal pyramids, which are sandwiched between the layers of the FeO{sub 6} octahedra. Smaller R atoms occupy the 9-fold coordinated position, whereas the 10-fold coordinated positions are occupied by larger Sr atoms. The Fe sublattice is ordered aniferromagnetically up to at least 500 K, while the rare-earth sublattice remains disordered down to 2 K. -- Graphical abstract: The Sr{sub 3}RFe{sub 4}O{sub 10.5} (R=Y, Ho, Dy) anion-deficient perovskites with a complete ordering of the A-cations and oxygen vacancies have been prepared using a solid-state reaction in evacuated sealed silica tubes. Oxygen vacancies reside in the (FeO{sub 5/43/4}) layers, comprising corner-sharing FeO{sub 4} tetrahedra and FeO{sub 5} tetragonal pyramids, which are sandwiched between the layers of the FeO{sub 6} octahedra. Smaller R atoms occupy the 9-fold coordinated position, whereas the 10-fold coordinated positions are occupied by larger Sr atoms.

36 MATERIALS SCIENCE↗