Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Spectroscopic and thermodynamic properties of molecular hydrogen dissolved in water at pressures up to 200 MPa

We have measured the Raman Q-branch of hydrogen in a solution with water at a temperature of about 280 K and at pressures from 20 to 200 MPa. From a least-mean-square fitting analysis of the broad Raman Q-branch, we isolated the contributions from the four lowest individual roto-vibrational lines. The vibrational lines were narrower than the pure rotational Raman lines of hydrogen dissolved in water measured previously, but significantly larger than in the gas. The separations between these lines were found to be significantly smaller than in gaseous hydrogen and their widths were slightly increasing with pressure. The lines were narrowing with increasing rotational quantum number. The Raman frequencies of all roto-vibrational lines were approaching the values of gas phase hydrogen with increasing pressure. Additionally, from the comparison of the integrated intensity signal of Q-branch of hydrogen to the integrated Raman signal of the water bending mode, we have obtained the concentration of hydrogen in a solution with water along the 280 K isotherm. Hydrogen solubility increases slowly with pressure, and no deviation from a smooth behaviour was observed, even reaching thermodynamic conditions very close to the transition to the stable hydrogen hydrate. The analysis of the relative hydrogen concentration in solution on the basis of a simple thermodynamic model has allowed us to obtain the molar volume for the hydrogen gas/water solution. Interestingly, the volume relative to one hydrogen molecule in solution does not decrease with pressure and, at high pressure, is larger than the volume pertinent to one molecule of water. This is in favour of the theory of hydrophobic solvation, for which a larger and more stable structure of the water molecules is expected around a solute molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Can Solution Supersaturation Affect Protein Crystal Quality?

The formation of large protein crystals of "high quality" is considered a characteristic manifestation of microgravity. The physical processes that predict the formation of large, high quality protein crystals in the microgravity environment of space are considered rooted in the existence of a "depletion zone" in the vicinity of crystal. Namely, it is considered reasonable that crystal quality suffers in earth-grown crystals as a result of the incorporation of large aggregates, micro-crystals and/or large molecular weight "impurities", processes which are aided by density driven convective flow or mixing at the crystal-liquid interface. Sedimentation and density driven convection produce unfavorable solution conditions in the vicinity of the crystal surface, which promotes rapid crystal growth to the detriment of crystal size and quality. In this effort, we shall further present the hypothesis that the solution supersaturatoin at the crystal surface determines the growth mechanism, or mode, by which protein crystals grow. It is further hypothesized that protein crystal quality is affected by the mechanism or mode of crystal growth. Hence the formation of a depletion zone in microgravity environment is beneficial due to inhibition of impurity incorporatoin as well as preventing a kinetic roughening transition. It should be noted that for many proteins the magnitude of neither protein crystal growth rates nor solution supersaturation are predictors of a kinetic roughening transition. That is, the kinetic roughening transition supersaturation must be dtermined for each individual protein.

Gorti, Sridhar↗

Measurement of the 240 Pu/ 239 Pu mass ratio using a transition-edge-sensor microcalorimeter for total decay energy spectroscopy

In this study, we have developed a new category of sensor for measurement of the 240 Pu/ 239 Pu mass ratio from aqueous solution samples with advantages over existing methods. Aqueous solution plutonium samples were evaporated and encapsulated inside of a gold foil absorber, and a superconducting transition-edge-sensor microcalorimeter detector was used to measure the total reaction energy (Q-value) of nuclear decays via heat generated when the energy is thermalized. Since all of the decay energy is contained in the absorber, we measure a single spectral peak for each isotope, resulting in a simple spectral analysis problem with minimal peak overlap. We found that mechanical kneading of the absorber dramatically improves spectral quality by reducing the size of radioactive inclusions within the absorber to scales below 50 nm such that decay products primarily interact with atoms of the host material. Due to the low noise performance of the microcalorimeter detector, energy resolution values of 1 keV fwhm (full width at half-maximum) at 5.5 MeV have been achieved, an order of magnitude improvement over α-spectroscopy with conventional silicon detectors. We measured the 240 Pu/ 239 Pu mass ratio of two samples and confirmed the results by comparison to mass spectrometry values. These results have implications for future measurements of trace samples of nuclear material.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Relationship between X(5) models and the interacting boson model

The connections between the X(5) models [the original X(5) using an infinite square well, X(5)-{beta}{sup 8}, X(5)-{beta}{sup 6}, X(5)-{beta}{sup 4}, and X(5)-{beta}{sup 2}], based on particular solutions of the geometrical Bohr Hamiltonian with harmonic potential in the {gamma} degree of freedom, and the interacting boson model (IBM) are explored. This work is the natural extension of the work presented in Garcia-Ramos and Arias, Phys. Rev. C 77, 054307 (2008) for the E(5) models. For that purpose, a quite general one- and two-body IBM Hamiltonian is used and a numerical fit to the different X(5) model energies is performed; then the obtained wave functions are used to calculate B(E2) transition rates. It is shown that within the IBM one can reproduce well the results for energies and B(E2) transition rates obtained with all these X(5) models, although the agreement is not so impressive as for the E(5) models. From the fitted IBM parameters the corresponding energy surface can be extracted and, surprisingly, only the X(5) case corresponds in the moderately large N limit to an energy surface very close to the one expected for a critical point, whereas the rest of models are situated a little further away.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Growth conditions, structure, Raman characterization and optical properties of Sm-doped (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5} single crystals grown by the Czochralski method

The (Lu{sub x}Gd{sub 0.995-x}Sm{sub 0.005}){sub 2}SiO{sub 5} single crystals with x=0.095, 0.11, 0.15, 0.17, 0.19 0.35 and 0.5 were grown by the Czochralski method. Structural properties were investigated by X-ray diffraction measurements. Unit cell parameters and cell volume were determined by the Rietveld refinement of the collected X-ray powder spectra. The segregation features between Gd and Lu were estimated and analyzed. Vibrational properties of the solid solutions were analyzed on the basis of polarized Raman spectra acquired at 300-875 K temperature range. Absorption and emission spectra of Sm{sup 3+} ion in the crystals with different composition were analyzed in the terms of dopant energy levels, oscillator strengths of transitions and spectral features of luminescence bands in the visible range. Both structural and optical investigations revealed that change of Lu{sup 3+} content in (Lu{sub x}Gd{sub 0.995-x}Sm{sub 0.005}){sub 2}SiO{sub 5} solid solution crystals induces the phase transition from C2/c (Lu{sub 2}SiO{sub 5}) to P2{sub 1}/c (Gd{sub 2}SiO{sub 5}) structure. It was found that the break of LSO to GSO-type structure occurs at 0.15<x<0.17. - Graphical abstract: Single crystals of Sm{sup 3+}-doped (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5} solid solutions have been grown by Czochralski method and characterized by various techniques. Crystal structure changes from C2/c to P2{sub 1}/c for composition with 0.15<x<0.17. Change of crystal structure causes changes in emission spectra. Highlights: Black-Right-Pointing-Pointer The (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5} crystals are an alternative to LSO and GSO hosts for applications. Black-Right-Pointing-Pointer The break of the P2{sub 1}/c to C2/c structure in (Lu{sub x}Gd{sub 1-x}){sub 2}SiO{sub 5}:Sm occurs for 0.15<x<0.17. Black-Right-Pointing-Pointer Temperature-induced phase transition from C2/c to P2{sub 1}/c up to 875 K was not observed. Black-Right-Pointing-Pointer Observed significant changes of emission spectra caused by P2{sub 1}/c to C2/c structural transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pulsatile instability in rapid directional solidification - Strongly-nonlinear analysis

In the rapid directional solidification of a dilute binary alloy, analysis reveals that, in addition to the cellular mode of Mullins and Sekerka (1964), there is an oscillatory instability. For the model analyzed by Merchant and Davis (1990), the preferred wavenumber is zero; the mode is one of pulsation. Two strongly nonlinear analyses are performed that describe this pulsatile mode. In the first case, nonequilibrium effects that alter solute rejection at the interface are taken asymptotically small. A nonlinear oscillator equation governs the position of the solid-liquid interface at leading order, and amplitude and phase evolution equations are derived for the uniformly pulsating interface. The analysis provides a uniform description of both subcritical and supercritical bifurcation and the transition between the two. In the second case, nonequilibrium effects that alter solute rejection are taken asymptotically large, and a different nonlinear oscillator equation governs the location of the interface to leading order. A similar analysis allows for the derivation of an amplitude evolution equation for the uniformly pulsating interface. In this case, the bifurcation is always supercritical. The results are used to make predictions about the characteristics of solute bands that would be frozen into the solid.

Merchant, G. J.↗

Numerical simulation of boundary-layer transition

The transition to turbulence in boundary layers was investigated by direct numerical solution of the nonlinear, three-dimensional, incompressible Navier-Stokes equations in the half-infinite domain over a flat plate. Periodicity was imposed in the streamwise and spanwise directions. A body force was applied to approximate the effect of a nonparallel mean flow. The numerical method was spectra, based on Fourier series and Jacobi polynomials, and used divergence-free basis functions. Extremely rapid convergence was obtained when solving the linear Orr-Sommerfeld equation. The early nonlinear and three-dimensional stages of transition, in a boundary layer disturbed by a vibrating ribbon, were successfully simulated. Excellent qualitative agreement was observed with either experiments or weakly nonlinear theories. In particular, the breakdown pattern was staggered or nonstaggered depending on the disturbance amplitude.

Spalart, P. R.↗

Asymmetric Lithium Extraction and Insertion in High Voltage Spinel at Fast Rate

Spinel-structured ordered-LiNi 0.5 Mn 1.5 O 4 (o-LNMO) has experienced a resurgence of interest in the context of reducing scarce elements such as cobalt from lithium-ion battery. O-LNMO undergoes two two-phase reaction at slow rates. However, it is not known if such phenomenon also applies at fast rates. Herein, we investigate the rate-dependent phase transition behavior of o-LNMO through in operando time-resolved X-ray diffraction. The results indicate that a narrow region of solid solution reaction exists for charge and discharge at both slow and fast rate. The overall phase transition is highly asymmetric at fast rates. During fast charge, it is a particle-by-particle mechanism resulting from asynchronized reaction among the particles. Finally, during fast discharge, it is likely a core-shell mechanism involving transition from Li 0+x Ni 0.5 Mn 1.5 O 4 to Li 1+x Ni 0.5 Mn 1.5 O 4 in the outer layer of particles. The Li 0.5 Ni 0.5 Mn 1.5 O 4 phase is suppressed during fast discharge and only appears through Li redistribution upon relaxation.

25 ENERGY STORAGE↗

Cobalt Polypyridyl Complexes as Transparent Solution-Processable Solid-State Charge Transport Materials

Charge transport materials (CTMs) are traditionally inorganic semiconductors or metals. Yet, over the past few decades, new classes of solution-processable CTMs have evolved alongside new concepts for fabricating electronic devices at low cost and with exceptional properties. The vast majority of these novel materials are organic compounds and the use of transition metal complexes in electronic applications remains largely unexplored. In this work, a solution-processable solid-state charge transport material composed of a blend of [Co(bpyPY4)](OTf) 2 and Co(bpyPY4)](OTf) 3 where bpyPY4 is the hexadentate ligand 6,6'-bis(1,1-di(pyridin-2-yl)ethyl)-2,2'-bipyridine and OTf - is the trifluoromethanesulfonate anion is reported. Surprisingly, these films exhibit a negative temperature coefficient of conductivity (dσ/d T ) and non-Arrhenius behavior, with respectable solid-state conductivities of 3.0 S m -1 at room temperature and 7.4 S m -1 at 4.5 K. When employed as a CTM in a solid-state dye-sensitized solar cell, these largely amorphous, transparent films afford impressive solar energy conversion efficiencies of up to 5.7%. Organic–inorganic hybrid materials with negative temperature coefficients of conductivity generally feature extended flat π-systems with strong π–π interactions or high crystallinity. The lack of these features promotes [Co(bpyPY4)](OTf) 2+ x films as a new class of CTMs with a unique charge transport mechanism that remains to be explored.

36 MATERIALS SCIENCE↗

Spontaneous formation of circular and vortex ferroelectric domain structure in hexagonal YMnO{sub 3} and YMn{sub 0.9}Fe{sub 0.1}O{sub 3} prepared by low temperature solution synthesis

We report an experimental study of the domain structure of ferroelectric YMnO{sub 3} and YMn{sub 0.9}Fe{sub 0.1}O{sub 3} using polycrystalline samples prepared by direct hydrothermal crystallisation at 240 °C, well below their structural phase transition temperatures. Powder X-ray diffraction shows the expected P6{sub 3}cm space group for both samples with an increase in a and a small decrease in c with Fe incorporation, consistent with an adjustment of MnO{sub 5} tilting, while XANES spectra at the Mn and Fe K edges show the oxidation state of both metals are maintained at +3 in the doped sample. High resolution TEM shows that curved stripe, annular and vortex domains can all be observed in the YMnO{sub 3} crystals, proving that the structural phase transition is not the only driving force for the occurrence of the annular and vortex domains. Furthermore, the absence of the annular and vortex domains in YMn{sub 0.9}Fe{sub 0.1}O{sub 3} indicates that the tilting state of MnO{sub 5} bipyramids plays an important role in the domain formation. Atomic resolution STEM images confirm that the ferroelectric domain walls correspond to structural antiphase boundaries similar to the crystals made via high temperature solid-state reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bottom Fixed Platform Dynamics Models Assessing Surface Ice Interactions for Transitional Depth Structures in the Great Lakes: FAST8 – IceDyn

To create long-term solutions for offshore wind turbines in a variety of environmental conditions, CAE tools are needed to model the design-driving loads that interact with an offshore wind turbine system during operation. This report describes our efforts in augmenting existing CAE tools used for offshore wind turbine analysis with a new module that can provide simulation capabilities for ice loading on the system. This augmentation was accomplished by creating an ice-loading module coupled to FAST8, the CAE tool maintained by the NREL for simulating land-based and offshore wind turbine dynamics. The new module includes both static and dynamic ice loading that can be applied during a dynamic simulation of the response of an offshore wind turbine. The ice forces can be prescribed, or influenced by the structure’s compliant response, or by the dynamics of both the structure and the ice floe. The new module covers ice failure modes of spalling, buckling, crushing, splitting, and bending. The supporting structure of wind turbines can be modeled as a vertical or sloping form at the waterline. The Inward Battered Guide Structure (IBGS) foundation designed by Keystone Engineering for the Great Lakes was used to study the ice models coupled to FAST8. The IBGS foundation ice loading simulations in FAST8 were compared to the baseline simulation case without ice loading. The ice conditions reflecting those from Lake Huron at Port Huron and Lake Michigan at North Manitou were studied under near rated wind speed of 12 m/s for the NREL 5-MW reference turbine. Simulations were performed on ice loading models 1 through 4 and ice model 6 with their respective sub-models. The purpose of ice model 5 is to investigate ice loading on sloping structures such as ice-cones on a monopile and is not suitable for multi-membered jacketed structures like the IBGS foundation. The key response parameters from the simulations, shear forces and moments from the tower base and IBGS foundation base, were compared. Ice models 1 and 6 do not significantly affect the tower fore-aft shear and moment. However, ice model 2 (dynamic analyses), model 3 (random ice loading), and model 4 (multiple ice failure zone loading) show increased effect on the tower fore-aft shear and moment with significant effect from ice model 3.1. In general ice loading creates large reaction forces and moments at the base of the IBGS foundation; the largest occurred in model 1.1 (steady creep ice indentation loading) followed by model 3.1 (random creep ice indentation loading). In general the power production from the ice loading cases had little deviation from the baseline case without ice loading. For ultimate limit state (ULS), ice model 1.1 ice and 3.1 appear to be the ice most critical models to consider at an early stage of design. Ice model 4 is an important tool for assessing structural fatigue.

17 WIND ENERGY↗

A thin-layer solution of the flow about a prolate spheroid

Computational results are presented for the transitional or turbulent flow about a prolate spheroid, at alpha = 10 deg or 30 deg, correspondingly, using an implicit, approximately factored, partially flux-split algorithm, based on the thin-layer equations. The computed flow field is in good agreement with available experimental data.

Panaras, A. G.↗

Simulation Analysis of the Temperature Dependence of Lignin Structure and Dynamics

Lignins are hydrophobic, branched polymers that regulate water conduction and provide protection against chemical and biological degradation in plant cell walls. Lignins also form a residual barrier to effective hydrolysis of plant biomass pretreated at elevated temperatures in cellulosic ethanol production. Here, the temperature-dependent structure and dynamics of individual softwood lignin polymers in aqueous solution are examined using extensive (17 s) molecular dynamics simulations. With decreasing temperature the lignins are found to transition from mobile, extended to glassy, compact states. The polymers are composed of blobs, inside which the radius of gyration of a polymer segment is a power-law function of the number of monomers comprising it. In the low temperature states the blobs are interpermeable, the polymer does not conform to Zimm/Stockmayer theory, and branching does not lead to reduction of the polymer size, the radius of gyration being instead determined by shape anisotropy. At high temperatures the blobs become spatially separated leading to a fractal crumpled globule form. The low-temperature collapse is thermodynamically driven by the increase of the translational entropy and density fluctuations of water molecules removed from the hydration shell, thus distinguishing lignin collapse from enthalpically driven coil globule polymer transitions and providing a thermodynamic role of hydration water density fluctuations in driving hydrophobic polymer collapse. Although hydrophobic, lignin is wetted, leading to locally enhanced chain dynamics of solvent-exposed monomers. The detailed characterization obtained here provides insight at atomic detail into processes relevant to biomass pretreatment for cellulosic ethanol production and general polymer coil globule transition phenomena.

Petridis, Loukas↗

$${\mathcal{P}}{\mathcal{T}}$$-Symmetric Effective Model for Nonequilibrium Phase Transitions in a Dissipative Fermionic Mott Insulator Chain

Nonequilibrium phase transitions in open dissipative systems can be described as instabilities in the spectra and wavefunctions of effective non-Hermitian Hamiltonians invariant under simultaneous parity (P) and time-reversal (T) transformations. The degree of non-Hermiticity reflects the strength of the external drive and dissipation, and the transition is described as a loss of the PT symmetry of the solutions corresponding to stationary low-drive dynamics. This approach has been successfully applied to spin, superconducting, and Mott insulator systems. However, the microscopic foundations for the employed phenomenological models are currently lacking. Here we propose a microscopic mechanism leading to the PT-symmetric effective model in the context of the nonequilibrium Mott transition in a dissipative Hubbard chain. Our model comprises a half-filled fermionic Hubbard chain subject to a constant electric field. The dissipation is introduced via the electron-phonon coupling. We obtain the explicit expressions for the non-Hermitian parameter in terms of the electron-phonon coupling strength and driving field. Analyzing the implications of microscopic model, we find a re-entrant Mott insulator with the increasing electric field for phonon density of states that increases slower than the square of the energy (such as in one or two dimensions), or varies non-monotonously with energy.

36 MATERIALS SCIENCE↗

A Spitzer Infrared Radius for the Transiting Extrasolar Planet HD 209458 b

We have measured the infrared transit of the extrasolar planet HD 209458 b using the Spitzer Space Telescope. We observed two primary eclipse events (one partial and one complete transit) using the 24 micrometer array of the Multiband Imaging Photometer for Spitzer (MIPS). We analyzed a total of 2392 individual images (10-second integrations) of the planetary system, recorded before, during, and after transit. We perform optimal photometry on the images and use the local zodiacal light as a short-term flux reference. At this long wavelength, the transit curve has a simple box-like shape, allowing robust solutions for the stellar and planetary radii independent of stellar limb darkening, which is negligible at 24 micrometers. We derive a stellar radius of R(sub *) = 1.06 plus or minus 0.07 solar radius, a planetary radius of R(sub p) = 1.26 plus or minus 0.08 R(sub J), and a stellar mass of 1.17 solar mass. Within the errors, our results agree with the measurements at visible wavelengths. The 24 micrometer radius of the planet therefore does not differ significantly compared to the visible result. We point out the potential for deriving extrasolar transiting planet radii to high accuracy using transit photometry at slightly shorter IR wavelengths where greater photometric precision is possible.

Richardson, L. Jeremy↗

Protein-style dynamical transition in a non-biological polymer and a non-aqueous solvent

Using neutron scattering and molecular dynamics simulation, techniques most often associated with protein dynamical transition studies, we have investigated the microscopic dynamics of one of the most common polymers, polystyrene, which was exposed to toluene vapor, mimicking the process of protein hydration from water vapor. Polystyrene with adsorbed toluene is an example of a solvent-solute system, which, unlike biopolymers, is anhydrous and lacks hydrogen bonding. Nevertheless, it exhibits the essential traits of the dynamical transition in biomolecules, such as a specific dependence of the microscopic dynamics of both solvent and host on the temperature and the amount of solvent adsorbed. Ultimately, we conclude that the protein dynamical transition is a manifestation of a universal solvent-solute dynamical relationship, which is not specific to either biomolecules as solute, or aqueous media as solvent, or even a particular type of interactions between solvent and solute.

36 MATERIALS SCIENCE↗

Solution properties, unperturbed dimensions, and chain flexibility of poly(1‐adamantyl acrylate)

ABSTRACT Poly(1‐adamantyl acrylate) (PAdA) exhibits much higher glass transition and degradation temperatures than other polyacrylates. However, the quantitative evaluation of the stiffness of this polymer chain has not been reported previously. In this study, the dilute solution properties and conformational characteristics of PAdA were evaluated using viscometry and scattering techniques. The unperturbed dimensions of this polymer were evaluated using the Burchard–Stockmayer–Fixman extrapolation and the touched‐bead wormlike chain model. The PAdA chain has a comparable persistence length, diameter per bead and characteristic ratio to poly(methyl methacrylate) and polystyrene. All these results indicate that PAdA is less flexible than common polyacrylates. In addition, the second virial coefficients ( A 2 ) of PAdA in different solvents obtained by static light scattering were compared. Among the solvents investigated, tetrahydrofuran is a moderate solvent. Radius of gyration of a polymer sample in the various solvents ranged from 16.8 to 30.3 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1526–1531

Lu, Wei↗

A single β-octyl glucoside molecule induces HIV-1 Nef dimer formation in the absence of partner protein binding

The HIV-1 Nef accessory protein is essential for viral pathogenicity and AIDS progression. Nef forms complexes with multiple host cell factors to facilitate viral replication and promote immune escape of HIV-infected cells. Previous X-ray crystal structures demonstrate that Nef forms homodimers, the orientation of which are influenced by host cell binding partners. In cell-based fluorescence complementation assays, Nef forms homodimers at the plasma membrane. However, recombinant Nef proteins often exist as monomers in solution, suggesting that membrane interaction may also trigger monomer to dimer transitions. In this study, we show that monomeric Nef core proteins can be induced to form dimers in the presence of low concentrations of the non-ionic surfactant, β-octyl glucoside (βOG). X-ray crystallography revealed that a single βOG molecule is present in the Nef dimer, with the 8-carbon acyl chain of the ligand binding to a hydrophobic pocket formed by the dimer interface. This Nef-βOG dimer interface involves helix αB, as observed in previous dimer structures, as well as a helix formed by N-terminal residues 54–66. Nef dimer formation is stabilized in solution by the addition of βOG, providing biochemical validation for the crystal structure. These observations together suggest that the interaction with host cell lipid mediators or other hydrophobic ligands may play a role in Nef dimerization, which has been previously linked to multiple Nef functions including host cell protein kinase activation, CD4 downregulation, and enhancement of HIV-1 replication.

59 BASIC BIOLOGICAL SCIENCES↗