Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Multi-scale dynamic modeling and validation of radial flow fixed bed contactors for post-combustion CO 2 capture using bench scale and pilot plant data

Here, in this work, a multi-scale model of a radial flow fixed bed contactor packed with a carbon sorbent is developed and validated with laboratory-scale and pilot plant scale dynamic data. For the lab scale system, the model results were compared with low, medium and high gas and sweep flowrates, yielding root mean square error (RMSE) of 0.80, 0.63, 0.96 CO 2 mol%, respectively, for the outlet CO 2 concentration profile considering the entire A-D cycle. For the bed outer temperature profile, maximum RMSE was found to be 5.5 °C considering all flowrates and entire A-D cycles. An experimental campaign was developed and applied to a pilot plant at Technology Center Mongstad (TCM), Norway. Approaches were developed for pre-processing of data including consideration of the effect of gas mixing, measurement delay, and determination of cyclic steady-state conditions. Considering profiles during A-D cycles for all test runs, it was found that the maximum RMSE for pressure drop, temperature for the outer section of the bed, temperature for the middle section of the bed, and outlet CO 2 concentration profile remained less than 1.5 mbar, 3.5 °C, 2.8 °C, and 1.3 CO 2 mol%, respectively. The validated model was used to perform sensitivity studies on several key design operating variables for the adsorption-desorption cycle. It was found that the flow rate and concentration of flue gas have dominant nonlinear effects on the breakthrough time while the desorption time was strongly affected by the sweep gas flowrate for the specific sorbent being evaluated in this study.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Nucleation and Antiphase Twin Control in Bi 2 Se 3 via Step‐Terminated Al 2 O 3 Substrates

The epitaxial synthesis of high-quality 2D layered materials is an essential driver of both fundamental physics studies and technological applications. Bi 2 Se 3 , a prototypical 2D layered topological insulator, is sensitive to defects imparted during the growth, either thermodynamically or due to the film-substrate interaction. Here, in this study, it is shown that step-terminated Al 2 O 3 substrates with a high miscut angle (3°) can effectively suppress a particular hard-to-mitigate defect, the antiphase twin. Systematic investigations across a range of growth temperatures and substrate miscut angles confirm that atomic step edges act as preferential nucleation sites, stabilizing a single twin domain. First-principles calculations suggest that there is a significant energy barrier for twin boundary formation at step edges, supporting the experimental observations. Detailed structural characterization indicates that this twin-selectivity is lost through the mechanism of the 2D layers overgrowing the step edges, leading to higher twin density as the thickness increases. These findings highlight the complex energy landscape unique to 2D materials that is driven by the interplay between substrate properties, nucleation dynamics, and defect formation, and overcoming and controlling these are critical to improve material quality for quantum and electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Linking DSC/TGA to Cell Levels: Energetics, Evolved Gases, and Thermal Safety of NMC811‐Graphite Micro‐Cell

Thermochemical characterization of battery materials links intrinsic material properties to decomposition pathways, heat generation, and gas evolution that govern performance and safety. Despite extensive work on NMC811-Graphite, variability across partial configurations and the limited adoption of micro-cell architectures (cathode+anode+electrolyte+separator) hinder robust cell-scale interpretation. Accordingly, this work establishes a bottom-up, component-resolved methodology integrating DSC/TGA, evolved gas analysis (EGA), and in situ XRD to link decomposition pathways and energy release across partial and micro-cell configurations, providing a transferable assessment of safety and stability in emerging chemistries. In separator-free configurations, the gas–solid reaction between cathode-evolved O 2 and anode-leached Li dominates the net heat release (1139 J g −1 ). In contrast, in the micro-cell configuration, the separator hinders O 2 transport and alters the timing and pathways of other reactions, and reduces the net energy release to 618 J g −1 . Energy release was organized into defined temperature windows that provide a framework for a thermodynamic model combining quantified gas evolution with selected decomposition pathways and effective reaction enthalpies to estimate net specific energy release, with agreement between DSC and cell-level tests. Ex situ XPS of heat-treated samples extends post-mortem analysis to thermal-abuse regimes, supporting key pathway elements.

25 ENERGY STORAGE↗
DOE OSTI2025

The Effect of Slag Heat Treatment on Ingot Quality during Cold Start Electroslag Remelting

Heat treatments of a commercial 40CaF 2 –30CaO–30Al 2 O 3 slag are explored to study their effect on quality of ingots produced using cold start electroslag remelting (ESR). Reducing heat treatment (or roasting) time or temperature for slag degassing can lead to energy savings as well as longer lifetimes for various components. Heat treatments in vacuum with pressure monitoring and air are investigated along with several temperatures, heating rates, and/or holding times. A research scale ESR furnace is used with steel electrodes. Significant differences in ingot quality, such as the occurrence of pores and a rough sidewall near the bottom of the ingot produced using slag heat treated in air at 580 °C, are observed. Further, adjustments in the heat treatment temperature for heat treatment in air eventually lead to an ingot quality comparable to that obtained using slag degassing in a controlled atmosphere at higher temperatures. Using differential thermal analysis, it is found that moisture is primarily removed from the slag at ≈460 °C and 700 °C. A safe slag roasting temperature is concluded to be 750 °C. Improper slag heat treatment leads to hydrogen concentrations from 8 to 15 ppm in about one‐quarter of the ingot volume.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High hardness and oxidation-resistant Cr-containing medium entropy ZrTaW diboride

This study reports the successful synthesis of a Cr-containing (Zr 0.30 Ta 0.34 Cr 0.06 W 0.30 )B 2 medium-entropy boride (MEB) via an in-situ reactive borothermal reduction route from oxide precursors. High-energy ball milling was employed to homogenize the precursor mixture prior to reactive densification. X-ray diffraction confirmed the formation of a predominantly AlB₂-type hexagonal diboride structure together with a secondary (W X , M 1-X )B monoboride phase. Microstructural characterization revealed compositional heterogeneity and localized W-rich regions associated with the secondary phase. The synthesized medium-entropy boride exhibited enhanced mechanical properties, which are attributed to lattice distortion and solid-solution strengthening effects. Thermogravimetric analysis revealed complex multistage oxidation behavior, and the oxidation resistance was compared with conventional ultra-high-temperature diborides. The results demonstrate the strong relationship between oxide-derived processing, compositional complexity, phase evolution, and oxidation behavior, highlighting the potential of medium-entropy borides for high-temperature structural applications

36 MATERIALS SCIENCE↗
DOE OSTI2025

Operando Optical Microscopy for Visualization of Dendrite Growth in an Argyrodite LPSCl–Polymer Composite Electrolyte

Herein, we demonstrate the utility of optical microscopy as an accessible technique for the in situ visualization of dendrite growth within polymer–sulfide composite solid-state electrolytes. The composite electrolyte features in situ polymerization and cross-linking of the polymer between ceramic particles, which opens up extensive opportunities for accelerated materials discovery, given the vast array of acrylate/methacrylate monomers available. Specifically, the cross-linked polymer poly(triethylene glycol dimethacrylate) (poly(TEGDMA)) was observed to effectively fill pores and inhibit dendrite growth at the lithium metal interface, attributed to its glassy state at room temperature. This work represents the first application of optical microscopy to illustrate that the incorporation of glassy, undoped polymers such as poly(TEGDMA) can serve as a viable strategy for dendrite suppression in solid-state composite electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interlayer pairing in bilayer nickelates

The discovery of T c ~ 80 K superconductivity in pressurized La 3 Ni 2 O 7 has launched a new platform to study high-temperature superconductivity. Using non-perturbative dynamic cluster approximation quantum Monte Carlo calculations, we characterize the magnetic and superconducting pairing behavior of a realistic bilayer two-orbital Hubbard-Hund model of this system that describes the relevant Ni e g states with physically relevant interaction strengths. We find a leading s ± superconducting instability in this model at a temperature T ~ 100 K close to the experimentally observed T c . Analyzing the orbital and spatial structure of the effective pairing interaction giving rise to this state reveals that the interaction predominantly acts between local interlayer pairs of the $d_{3z^2-r^2}$ orbital. By correlating the strength of the interaction with that of the magnetic spin fluctuations we show that it is driven by strong interlayer spin-fluctuations arising from the $d_{3z^2-r^2}$ orbital. These results provide first-time non-perturbative evidence supporting the picture that a simple single-orbital bilayer Hubbard model for the Ni $d_{3z^2-r^2}$ orbital provides an excellent low-energy effective description of the superconducting behavior of La 3 Ni 2 O 7 .

Maier, Thomas A. [Oak Ridge National Laboratory (O↗
DOE OSTI2025

Trinuclear gold chains and octanuclear copper gyrobifastigia stabilized using a fluorinated pyridyl ligand

The fluorinated pyridyl ligand [6-(CF 3 )-2-Py] − with gold( I ) affords trinuclear Au 3 assemblies that further organize into a supramolecular helical column through aurophilic interactions. Its chemistry with copper( I ) is even more remarkable, leading to an unprecedented octanuclear copper–pyridyl cluster complex featuring a central Cu 8 core with an approximate gyrobifastigium geometry. Solid powders of compounds {(6-(CF 3 )-2-Py)Au} 3 and {(6-(CF 3 )-2-Py)Cu} 8 exhibit intense photoluminescence at room temperature, displaying green and yellow colors to the naked eye, respectively. Here, the octanuclear copper complex is also an effective catalyst for azide–alkyne cycloaddition, producing triazoles. Detailed computational analyses confirm the preference for experimental geometries and provide insights into the observed luminescence.

Phan, Vo Quang Huy [University of Texas at Arlingt↗
DOE OSTI2025

Enabling ITO-free perovskite solar cells through n-doped poly(benzodifurandione) (n-PBDF) electrodes

The burgeoning commercialization of perovskite solar cells (PSCs) is propelled by their exceptional power conversion efficiency (PCE), enhanced stability, and ease of fabrication. However, the rigidity of mainstream transparent conductive oxides (TCOs) limits the adaptability of PSCs to various application scenarios. Although alternative materials such as silver nanowires, carbon nanotubes, graphene, and PEDOT:PSS have been evaluated, the p-type nature confines their device designs to inverted architecture and restricts broader applicability. Here, for the first time, a conducting polymer electrode based on n-doped poly(benzodifurandione) (n-PBDF) was used to replace TCOs in PSCs. The n-PBDF electrodes can be readily fabricated via low-temperature, solution-based processes, indicating substantial potential for reducing manufacturing costs. Furthermore, its integration into PSCs has negligible effect on the phase, morphology, or photophysical properties of the perovskite layer, which is comparable to the typical TCOs. After optimization, the n-PBDF-based device achieves a power conversion efficiency of 12.70 and 11.23%, for rigid and flexible devices, respectively. Our study provides a promising alternative to the widely used TCOs in PSCs, highlighting the advantages of using n-doped conducting polymers in terms of processability and flexibility.

Kumar, Prashant [Purdue University, West Lafayette↗
DOE OSTI2025

Nonexcitonic mechanism for electronic and structural phase transitions in Ta 2 ⁢Ni⁢(Se,S) 5

Here, we present a first-principles study based on density functional theory (DFT) on the electronic and structural properties of Ta 2 NiSe 5 , a layered transition metal chalcogenide that has been considered as a possible candidate for an excitonic insulator. Our systematic DFT results however provide a nonexcitonic mechanism for the experimentally observed electronic and structural phase transitions in Ta 2 NiSe 5 , in particular explaining why sulfur substitution of selenium reduces the distortion angle in the low-temperature phase and potassium dosing closes the gap in the electronic structure. Moreover, the calculations show that these two effects couple to each other. Further, our first-principles calculations predict several changes in both the crystal structure and electronic structure under the effects of uniform charge dosing and uniaxial strain, which could be tested experimentally.

Tang, Weichen [University of California, Berkeley,↗
DOE OSTI2025

Fundamental mode excitation via Joule–Thomson light expansion in nonlinear optical lattices

Under linear conditions, power injected from a single waveguide into a multi-core fiber array results in multimode propagation, progressively diminishing the spatial coherence of light. In this work, we introduce a comprehensive approach to mitigate this coherence loss by means of a nonlinear thermodynamic Joule–Thomson expansion. By leveraging the tools of optical thermodynamics, we demonstrate that as light undergoes a sudden transition from a small to a larger nonlinear optical array, it can abruptly drop its optical temperature to near-zero values. During this cooling process, light irreversibly flows into the system's fundamental mode with very high efficiency, synchronizing all elements of the lattice with the input port. We show that this nonlinear effect is highly predictable even in systems of arbitrary geometry and shape and can be controlled precisely by the initial conditions at the input of the array. In particular, for a single injection point, the reduction in optical temperature can be directly determined by the total power, irrespective of the input location.

Pyrialakos, Georgios G. (ORCID:0000000286129694)↗
DOE OSTI2026

Carbon dioxide, water vapor and methane soil efflux (soil respiration) in a Pinus palustris root exclusion in Georgetown, SC

This dataset contains processed data from a combination of survey flux chambers and long-term automated flux chambers. Soil flux measurements were conducted from June 2023 through December 2025 in a mature longleaf pine forest in Georgetown, SC. Soil respiration measurements were conducted approximately biweekly for two and a half years, before and after a root exclusion that took place on May 5, 2024. Processed, QAQC’d data for the treatment (root exclusion) and control (roots intact) before and after the root exclusion can be found in the file: 1_DATA_ESS_DOE_HR_RS_HB2_QAQC_Survey_Data_20260223.csv. Two multiday deployments were also conducted prior to the root exclusion using long-term automated chambers to continuously monitor greenhouse gas soil efflux. Processed, QAQC’d data for both long-term deployments can be found in the file: 2_DATA_ESS_DOE_HR_RS_HB2_QAQC_Longterm_Data_20260209.csv. Raw and working data files (.json, .81x, & .82z format) from LI-COR equipment are included for reference and can be accessed using SoilFluxPro software. CSV metadata files describe the raw data and modifications made using SoilFluxPro v5 and Matlab R2024b, as well as formatting and units for processed CSVs. Matlab code is included for reading in the processed CSVs, with sample figures comparing treatment and control. This research was performed as part of the project: “Improving models of stand and watershed carbon and water fluxes with more accurate representations of soil-plant-water dynamics in southern pine ecosystems”, which examines in part the effects hydraulic redistribution on soil efflux of carbon dioxide, water vapor and methane, as well as soil moisture and temperature in a southern pine ecosystem with sandy soils and high water table.

CARBON DIOXIDE FLUX↗
DOE OSTI2026

Carbon dioxide, water vapor and methane soil efflux (soil respiration) in a Pinus palustris restoration site in Georgetown, SC

This dataset contains processed data from a combination of survey flux chambers and long-term automated flux chambers. Biweekly soil flux measurements were conducted from June 2023 through December 2025 at a longleaf pine restoration site in Georgetown, SC. Processed, QAQC’d data can be found in the file: 1_DATA_ESS_DOE_HR_RS_HB3_QAQC_Survey_Data_20260223.csv. Raw and working data files (.json, & .81x format) from LI-COR equipment are included for reference and can be accessed using SoilFluxPro software. CSV metadata files describe the raw data and modifications made using SoilFluxPro v5 and Matlab R2024b, as well as formatting and units for processed CSVs. Matlab code is included for reading in the processed CSVs. This research was performed as part of the project: “Improving models of stand and watershed carbon and water fluxes with more accurate representations of soil-plant-water dynamics in southern pine ecosystems”, which examines in part the effects hydraulic redistribution on soil efflux of carbon dioxide, water vapor and methane, as well as soil moisture and temperature in a southern pine ecosystem with sandy soils and high water table.

CARBON DIOXIDE FLUX↗
DOE OSTI2025

Enhancement of PyARC for Westinghouse Electric Company’s Lead Fast Reactor Design and Modeling (Final TCF Report)

Westinghouse Electric Company is a nuclear reactor vendor headquartered in the U.S. that is developing advanced reactor technology for the U.S. and global markets. Westinghouse has been relying on the neutronics Argonne Reactor Codes (ARC) executed through the NEAMS Workbench and its PyARC module that are developed under the DOE-NE Nuclear Energy Advanced Modeling and Simulation (NEAMS) and Advanced Reactor Technology (ART) – Fast Reactor programs. Through this user experience, Westinghouse identified several enhancements that would benefit the ARC codes’ usability by the US industry and therefore its commercialization potential. The enhancements were proposed to deliver both improvements in workflow and analysis capabilities to better support effective fast reactor core design and analysis to the nuclear industry. The PyARC workflow was extended in this project by integrating non-neutronic ARC codes DASSH and NUBOW-3D. The Ducted Assembly Steady-State Heat equation (DASSH) code is developed at ANL to perform steady-state thermal hydraulic sub-channel analysis in liquid metal fast reactor assemblies to determine optimized coolant flow and temperature distributions, which in this project was updated and validated for lead fast reactor (LFR) applications. The interface between REBUS and NUBOW-3D were improved in this project to assess the impact of the core restraint design and thermal induced expansion effects on the reactivity of the core, and to model the deformations of the fuel assemblies induced by temperature and irradiation. Finally, the ARC models that were extensively verified and validated through various SFR-based modeling benchmarks are extended in this project through code-to-code comparison on relevant LFR-specific neutronics benchmarks against Monte-Carlo neutronic solutions. Overall, this work enables verification of the capability of the ARC codes for a wide range of Generation-IV reactor designs. The outcome of this project is the release of a comprehensive modeling toolkit of validated, robust and efficient codes, as well as their user interface, that enables industry to perform a wide range of fast reactor analyses for design and licensing of their concepts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Revisiting Structural and Electromechanical Properties of the Lead-free (K,Na)NbO 3 High-Piezoelectric Material

Having lead-free systems with excellent piezoelectric responses is crucial to the development of environmentally friendly electromechanical applications. In this work, we build an effective Hamiltonian model to explore the promising (K x Na 1–x )NbO 3 system, whose rich phase diagram near x = 50% remains poorly understood meanwhile exhibiting a colossal effective piezoelectric response. Thanks to the numerical implementation of this effective Hamiltonian scheme into a Monte Carlo Metropolis algorithm, we reveal striking features. First, a long-period state can be the ground state at low temperatures for some concentrations while only a short-period conventional polar ground state exists for larger x. Second, the electric field-driven transformation, via a first-order transition, of this long-period state into a short-period polar state creates large electromechanical strains (on the order of the percent) and is likely the origin of the colossal piezoelectric response reported in KNN, for which we evaluate an effective piezoelectric coefficient of several thousands of pC/N.

(K,Na)NbO3↗
DOE OSTI2025

Competing and Anisotropic Exchange Interactions in the Kagome Lattice Ferromagnet Co 3 Sn 2 S 2

The kagome lattice ferromagnet, Co 3 Sn 2 S 2 , serves as template for a host of materials that exhibit exotic topological states, as well as a giant anomalous Hall state—a momentous realization in condensed matter physics. The anisotropic exchange interactions are probed by applying external magnetic fields in various directions along major crystal axes and the magneto-optical response is recorded. When magnetic fields are applied along the a–b plane, long-range magnetism forms and grows with increasing temperature. This counterintuitive behavior does not take place when the magnetic field is applied at a slight angle off the a–b plane. In fact, the opposite effect is observed for this exact configuration, as well as for other fields arrangements. Ab initio theoretical calculations reveal that anisotropic exchange interactions are the underlying mechanism leading to this peculiar behavior. Furthermore, the long-range ferromagnetic order along the c-axis is thought to coexist with an antiferromagnetic, or spin glass, state in the a–b plane, before becoming paramagnetic above the Curie temperature (T c ). These two coexisting magnetic states are thought to compete as the temperature approaches T c , with the antiferromagnetic state gaining strength compared to the ferromagnetic order.

Barua, Arup [University of South Florida, Tampa, F↗
DOE OSTI2026

Temperature Inversions below 1 km from a V-Band Scanning Radiometer at the North Slope of Alaska

A single-channel (56.7 GHz) scanning radiometer was deployed in August 2022 at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska site near Utqiaġvik. The radiometer is designed to provide temperature profiles between 0 and 1 km every 5 min. Averaging kernels show that this single-channel radiometer, taking observations at 10 discrete elevation angles, yields approximately the same information as a seven-channel V-band radiometer scanning three elevation angles. The instrument is able to reproduce the occurrence of temperature inversions between the surface and 1 km and their strength showing a correlation of 0.85, bias of −0.6 K, and slope of 1.04 with respect to radiosondes. Uncertainty in the inversion base height varies from 50 m near the surface to ∼300 m above 0.4 km when compared with radiosondes. Conversely, the inversion top height is overestimated and has higher uncertainty due to the degrading effects of the averaging kernels on the vertical resolution of the retrievals. Thanks to the high temporal resolution of the retrievals, the diurnal cycle of boundary layer temperature was evaluated showing that the radiometer can capture some aspects of the boundary layer thermal structure. The present analysis provides an overview of the capabilities of this simple observing configuration for selected applications.

Atmospheric profilers↗
DOE OSTI2025

Assessment of irradiation embrittlement effect on fatigue life of a pressurized-water reactor pressure vessel using the fracture toughness master curve approach

The reactor pressure vessel (RPV) is a critical structural component in pressurized-water reactors, and it is designed to withstand extreme conditions, such as high pressures, elevated temperatures, and prolonged radiation exposure. Ensuring RPV integrity is essential for the safe and reliable long-term operation of nuclear power plants, especially as aging mechanisms such as fatigue and irradiation embrittlement pose increased risks. Fatigue, caused by cyclic thermal and mechanical loading, can lead to crack initiation in localized high-stress regions. Simultaneously, neutron irradiation, particularly in the beltline region, progressively reduces fracture toughness, increasing susceptibility to brittle fracture. These combined effects of fatigue and irradiation embrittlement potentially impact the RPV structural integrity, necessitating fitness-for-service assessments. This study applies the fracture toughness master curve approach to evaluate the impact of irradiation embrittlement on RPV fatigue life. A coupled thermo-mechanical stress analysis identifies critical stress locations under normal service transients, pinpointing regions most vulnerable to fatigue crack initiation and growth. Stress intensity factors for postulated flaws at these locations are calculated, enabling an assessment of fatigue life under irradiated and unirradiated conditions. The results indicate that neutron irradiation embrittlement accelerates the conditions in which a critical crack can form and lead to failure, particularly at lower temperatures. The failure occurs where reduced fracture toughness limits the material’s resistance to crack growth. Axial cracks at nozzle corners are the most life limiting without irradiation, while circumferential cracks demonstrate longer fatigue lives. The findings highlight the importance of incorporating irradiation effects into fatigue life predictions to ensure the long-term structural integrity of RPVs.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗