Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Hyperbolic spoof plasmonic metasurfaces

Hyperbolic metasurfaces have recently emerged as a new research frontier because of the unprecedented capabilities to manipulate surface plasmon polaritons (SPPs) and many potential applications. But, thus far, the existence of hyperbolic metasurfaces has neither been observed nor predicted at low frequencies because noble metals cannot support SPPs at longer wavelengths. Here, we propose and experimentally demonstrate spoof plasmonic metasurfaces with a hyperbolic dispersion, where the spoof SPPs propagate on complementary H-shaped, perfectly conducting surfaces at low frequencies. Therefore, non-divergent diffractions, negative refraction and dispersion-dependent spin-momentum locking are observed as the spoof SPPs travel over the hyperbolic spoof plasmonic metasurfaces (HSPMs). The HSPMs provide fundamental new platforms to explore the propagation and spin of spoof SPPs. They show great capabilities for designing advanced surface wave devices such as spatial multiplexers, focusing and imaging devices, planar hyperlenses, and dispersion-dependent directional couplers, at both microwave and terahertz frequencies.

36 MATERIALS SCIENCE↗

Surface plasmons induce topological transition in graphene/α-MoO3 heterostructures

Abstract Polaritons in hyperbolic van der Waals materials—where principal axes have permittivities of opposite signs—are light-matter modes with unique properties and promising applications. Isofrequency contours of hyperbolic polaritons may undergo topological transitions from open hyperbolas to closed ellipse-like curves, prompting an abrupt change in physical properties. Electronically-tunable topological transitions are especially desirable for future integrated technologies but have yet to be demonstrated. In this work, we present a doping-induced topological transition effected by plasmon-phonon hybridization in graphene/α-MoO 3 heterostructures. Scanning near-field optical microscopy was used to image hybrid polaritons in graphene/α-MoO 3 . We demonstrate the topological transition and characterize hybrid modes, which can be tuned from surface waves to bulk waveguide modes, traversing an exceptional point arising from the anisotropic plasmon-phonon coupling. Graphene/α-MoO 3 heterostructures offer the possibility to explore dynamical topological transitions and directional coupling that could inspire new nanophotonic and quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distributed Acoustic Sensing Using Dark Fiber for Near-Surface Characterization and Broadband Seismic Event Detection

We present one of the first case studies demonstrating the use of distributed acoustic sensing deployed on regional unlit fiber-optic telecommunication infrastructure (dark fiber) for broadband seismic monitoring of both near-surface soil properties and earthquake seismology. We recorded 7 months of passive seismic data on a 27 km section of dark fiber stretching from West Sacramento, CA to Woodland, CA, densely sampled at 2 m spacing. This dataset was processed to extract surface wave velocity information using ambient noise interferometry techniques; the resulting VS profiles were used to map both shallow structural profiles and groundwater depth, thus demonstrating that basin-scale variations in hydrological state could be resolved using this technique. The same array was utilized for detection of regional and teleseismic earthquakes and evaluated for long period response using records from the M8.1 Chiapas, Mexico 2017, Sep 8th event. The combination of these two sets of observations conclusively demonstrates that regionally extensive fiber-optic networks can effectively be utilized for a host of geoscience observation tasks at a combination of scale and resolution previously inaccessible.

58 GEOSCIENCES↗

Self-absorption Effects In Experimental Methods Used To Determine Electron Density And Gas Temperature In An Argon Microwave Plasma (SWP) Generated At Atmospheric Pressure

In this work a procedure was applied to verify that self-absorption does not affect the spectral lines used in the experimental determination of the electron density and the gas temperature in surface wave discharges at atmospheric pressure. Therefore, the values of electron density and gas temperature obtained are not perturbed by this phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of the shifts of argon spectral lines

Shifts due to collisions with charged particles (Stark broadening ) and neutral atoms, were determined for nine argon spectral lines corresponding to the transitions 3p{sup 5}nd-3p{sup 5}4p for n = 4-7, 3p{sup 5}6s-3p{sup 5}4d and 3p{sup 5}4p'-3p{sup 5}4s in order to estimate their usability for the research and diagnostics of a plasma in a surface-wave discharge at atmospheric pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling Etching Plasmas: Needs and Challenges in Atomic and Molecular Data

This paper reviews works of the team to characterize and model chlorine high-density plasmas. The model allows in particular determining the pressure-dependence of the concentration of neutral and charged species. Comparison of this model to experimental measurements achieved in high-density surface-wave-produced plasmas shows an excellent agreement for the neutral atomic and molecular species. As far as charged species are concerned, the model reproduces well experiments for atomic chlorine ions and electrons, but some discrepancy occurs for molecular positive ions and negative ions at low pressure. The cause of this discrepancy remains to be clarified but might result from an underestimation of the creation rates of Cl{sub 2}{sup +} and Cl{sup -}. The model seems promising for predicting the ion density in a recently installed ICP reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of planar-type overdense plasma with resonant excitation of surface plasmon polaritons

The present study presents a plasma source, capable of generating overdense plasma below the whole quartz plate while exciting surface plasmon polaritons (SPPs) by means of a subwavelength diffraction grating. The wavelength of surface wave, calculated on either the discharge image or the simulated electric field distribution graph, is about 5.7 cm, which approximates the theoretical value by a calculation of the SPP dispersion equation in overdense plasma. The operation mechanism of plasma heating is attributed to the resonant excitation of SPPs and its dissipation in plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Translating oscillatory nonlinear structure in a plasma boundary

By means of a Madelung decomposition, exact periodic traveling solutions are constructed for a modified nonlinear Schroedinger equation derived by Stenflo and Gradov, describing electrostatic surface waves in semi-infinite plasma. The condition for the existence of bistable equilibria is discussed. A conservation law as well as the modulational instability admitted by the model are analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acoustoelectric effects in very high-mobility p-SiGe/Ge/SiGe heterostructure

Measurement results of the acoustoelectric effects [surface acoustic waves (SAW) attenuation and velocity] in a high-mobility p-SiGe/Ge/SiGe structure are presented. The structure was low-energy plasma-enhanced chemical vapor deposition grown with a two-dimensional (2D) channel buried in the strained Ge layer. The measurements were performed as a function of temperature (1.5-4.2 K) and magnetic field (up to 8.4 T) at different SAW intensities at frequencies 28 and 87 MHz. Shubnikov-de Haas-like oscillations of both SAW attenuation and the velocity change have been observed. Hole density and mobility, effective mass, quantum and transport relaxation times, as well as the Dingle temperature were measured with a method free of electric contacts. The effect of heating of the 2D hole gas by the electric field of the SAW was investigated. Energy relaxation time tau{sub e}psilon and the deformation potential constant determined.

36 MATERIALS SCIENCE↗

Hot and super-hot hydrogen atoms in microwave plasma

'Super-hot' (kinetic energy {approx}4-8 eV) and 'hot' (kinetic energy {approx}0.3 eV) H atoms were detected in a surface wave (500 MHz) generated H{sub 2} plasma column, at pressure p=0.01 mbar, from the analysis of the H{sub {beta}}, H{sub {gamma}}, H{sub {delta}}, and H{sub {epsilon}} emission line profiles. These profiles were found to evolve from single Gaussian to bi-Gaussian toward the plasma column end. Population inversion between the levels 5{yields}4 and 6{yields}4 was detected. At pressure p=0.2 mbar, super-hot atoms were not detected and the temperature of the hot atoms was found to increase with the upper level principal quantum number.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detection of signals in the ion cyclotron frequency range at the edge during ICRF heating on ASDEX Upgrade

The ICRF system on ASDEX Upgrade is equipped with an arc detector based on the observation of frequencies between 5 and 25 MHz in the RF feeding line [R1]. On some shots, the detector was triggered in an anomalous way: tenths of detections over several hundreds of milliseconds on detectors of all antennas at the same time [R2]. It was suggested that these frequencies were not excited by arcs but came from the plasma. We installed a RF probe inside the vacuum vessel and connected it to a fast acquisition system. We indeed observed frequencies during ICRF heating of several shots. We present here the features of these frequencies, their possible conditions of existence in terms of plasma and RF parameters (magnetic field, density, temperature, RF frequency, power injected) and we compare the source of these frequencies with known phenomena like ICE, CAE and surface waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A reconfigurable plasma antenna

An experiment aimed at investigating the antenna properties of different plasma structures of a plasma column as a reconfigurable plasma antenna, is reported. A 30 cm long plasma column is excited by surface wave, which acts as a plasma antenna. By changing the operating parameters, e.g., working pressure, drive frequency, input power, radius of glass tube, length of plasma column, and argon gas, single plasma antenna (plasma column) can be transformed to multiple small antenna elements (plasma blobs). It is also reported that number, length, and separation between two antenna elements can be controlled by operating parameters. Moreover, experiments are also carried out to study current profile, potential profile, conductivity profile, phase relations, radiation power patterns, etc. of the antenna elements. The effect on directivity with the number of antenna elements is also studied. Findings of the study indicate that entire structure of antenna elements can be treated as a phased array broadside vertical plasma antenna, which produces more directive radiation pattern than the single plasma antenna as well as physical properties and directivity of such antenna can be controlled by operating parameters. The study reveals the advantages of a plasma antenna over the conventional antenna in the sense that different antennas can be formed by tuning the operating parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-channelling of relativistic laser pulses in large-scale underdense plasmas

Relativistic self-focusing and channelling of intense laser pulses have been studied in underdense plasma using two-dimensional particle-in-cell (PIC) simulations, for different laser powers and plasma densities. Analytical solutions for the stationary evacuated channels have been recovered in PIC simulations. It is shown that otherwise stable channels can accelerate electrons due to surface waves on the walls of the channels. Relativistic filaments with finite electron density are unstable to transverse modulations which lead in the nonlinear stage to the breakup of laser pulses into independent filaments. Different regimes of relativistic self-focusing and channelling, including electron heating, transverse instability, and break-up of the filaments, have been discussed and characterized using plasma density and laser power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wireless communication capability of a reconfigurable plasma antenna

A 30 cm long plasma column is excited by a surface wave, which acts as a plasma antenna. Using plasma properties (pattern formation/striations in plasmas) single plasma antenna can be transformed into array, helical, and spiral plasma antenna. Experiments are carried out to study the power patterns, directivity, and half power beam width of such different plasma antennas. Moreover, field properties of plasma and copper antenna are studied. Further, wireless communication and jamming capability of plasma antenna are tested. Findings of this study suggest that directivity and communication range can be increased by converting single plasma antenna in to array/helical/spiral plasma antenna. Field frequencies of plasma antenna determine the communication and jamming of radio frequency waves. Therefore, this study invokes applications of pattern formation or striations of plasmas in plasma antenna technology.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of copious emission at the fundamental frequency by a Smith-Purcell free-electron laser with sidewalls

An experiment at microwave frequencies confirms the recent prediction that a Smith-Purcell [S. J. Smith and E. M. Purcell, Phys. Rev. 92, 1069 (1953)] free-electron laser equipped with sidewalls can emit radiation at the frequency of the surface wave. The power output is considerably greater than for the previously observed emission at the second harmonic, in agreement with three-dimensional simulations. The dependence of frequency on beam energy and emission angle is in good agreement with three-dimensional theory and simulations. Provided that a reduction in scale can be achieved, a path is open to coherent Smith-Purcell radiation at terahertz frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth rate and start current in Smith-Purcell free-electron lasers

This letter reports a theory to calculate the growth rate and start current of a Smith-Purcell free-electron laser, which is a promising radiation source in the terahertz domain. A two-dimensional model was used to investigate the interaction between a sheet electron beam and the surface wave above a lamellar grating. After deriving the growth rate from the dispersion equation, the start current was carefully estimated by considering the power flow above the grating. The agreement between the predictions of our theory and the results from the particle-in-cell simulations is acceptable.

07 ISOTOPE AND RADIATION SOURCES↗

Design and numerical simulations of a high power 0.15 THz oscillator

An overmoded rectangularly corrugated relativistic surface wave oscillator is designed and theoretically analyzed to produce the high power terahertz radiation with a TM{sub 01} mode. The design is fully verified and optimized by 2.5D particle-in-cell simulations. A high power terahertz wave is obtained with the output power of 285 MW at the frequency of 0.148 THz with conversion efficiency 20% when beam voltage is about 400 kV, current 3.8 kA, and the magnetic field 6 T.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microwave plasma source operating with atmospheric pressure air-water mixtures

The overall performance of a surface wave driven air-water plasma source operating at atmospheric pressure and 2.45 GHz has been analyzed. A 1D model previously developed has been improved in order to describe in detail the creation and loss processes of active species of interest. This model provides a complete characterization of the axial structure of the source, including the discharge and the afterglow zones. The main electron creation channel was found to be the associative ionization process N + O {yields} NO{sup +}+ e. The NO(X) relative density in the afterglow plasma jet ranges from 1.2% to 1.6% depending on power and water percentage, according to the model predictions and the measurements. Other types of species such as NO{sub 2} and nitrous acid HNO{sub 2} have also been detected by mass and Fourier Transform Infrared spectroscopy. The relative population density of O({sup 3}P) ground state atoms increases from 8% to 10% in the discharge zone when the input microwave power increases from 200 to 400 W and the water percentage from 1% to 10%. Furthermore, high densities of O{sub 2}(a{sup 1}{Delta}{sub g}) singlet delta oxygen molecules and OH radicals (1% and 5%, respectively) can be achieved in the discharge zone. In the late afterglow the O{sub 2}(a{sup 1}{Delta}{sub g}) density is about 0.1% of the total density. This plasma source has a flexible operation and potential for channeling the energy in ways that maximize the density of active species of interest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗