Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Unsteady Adjoint Approach for Design Optimization of Flapping Airfoils

This paper describes the work for optimizing the propulsive efficiency of flapping airfoils, i.e., improving the thrust under constraining aerodynamic work during the flapping flights by changing their shape and trajectory of motion with the unsteady discrete adjoint approach. For unsteady problems, it is essential to properly resolving time scales of motion under consideration and it must be compatible with the objective sought after. We include both the instantaneous and time-averaged (periodic) formulations in this study. For the design optimization with shape parameters or motion parameters, the time-averaged objective function is found to be more useful, while the instantaneous one is more suitable for flow control. The instantaneous objective function is operationally straightforward. On the other hand, the time-averaged objective function requires additional steps in the adjoint approach; the unsteady discrete adjoint equations for a periodic flow must be reformulated and the corresponding system of equations solved iteratively. We compare the design results from shape and trajectory optimizations and investigate the physical relevance of design variables to the flapping motion at on- and off-design conditions.

Lee, Byung Joon↗
DOE OSTI2026

DESI DR2 Results IV: Alcock-Paczyński Measurements from the Lyman Alpha Forest and Cosmological Constraints

We present Alcock-Paczyński (AP) measurements from the full shape of Lyman-$α$ (Ly$α$) forest correlation functions measured from the second data release (DR2) of the Dark Energy Spectroscopic Instrument (DESI). Our measurements include information from the Ly$α$ forest auto-correlation and its cross-correlation with quasars. We constrain the AP effect with $1\%$ precision at an effective redshift $z_\mathrm{eff}=2.33$, which is twice as tight as the Baryon Acoustic Oscillation (BAO) constraint from the same data. When using the joint Ly$α$ AP and BAO results, we measure the ratios $D_\text{H}(z_\mathrm{eff})/r_\text{d}=8.600 \pm 0.066$ and $D_\text{M}(z_\mathrm{eff})/r_\text{d}=39.32 \pm 0.33$, where $D_\text{M}$ is the transverse comoving distance, $D_\text{H}$ is the Hubble distance, and $r_\text{d}$ is the sound horizon at the drag epoch. Assuming $Λ$CDM, Ly$α$ forest measurements combined with a nucleosynthesis prior produce a constraint on the Hubble constant $H_0=66.5\pm1.3\,\mathrm{km\,s^{-1}\,Mpc^{-1}}$. The Ly$α$ AP result corresponds to a matter fraction constraint $Ω_\text{m}=0.325\pm0.018$ in $Λ$CDM, which is $1.4σ$ higher than DESI BAO. This impacts the DESI results relative to the Cosmic Microwave Background (CMB), slightly reducing their discrepancy from $2.4σ$ to $2.2σ$. We present updated constraints on extended models using the joint DESI DR2 BAO and Ly$α$ forest full shape data, together with external data sets. When considering a time-evolving dark energy equation of state parametrized by $w_0$ and $w_a$, we find it is preferred over $Λ$CDM at $2.7σ$ for the combination of DESI and CMB data, and at $3.2σ$ when also including supernovae. With the new Ly$α$ AP measurement, DESI provides its most precise anchor for the expansion history at $z > 1$ in the matter-dominated Universe.

Adame, A. G. [Vienna U.] (ORCID:0009000505949391)↗
DOE OSTI2021

Atomic understanding of structural deformations upon ablation of graphene

We investigate the atomic rearrangement in graphene under femtosecond pulse illumination with reactive molecular dynamics simulations and compare with ultra-fast laser ablation experiments. To model the impact of the laser pulse irradiation, heat is locally applied to a selected area of the graphene layer and the resulting structural deformation is simulated as a function of time, providing a detailed understanding of the bond breaking process under laser illumination and subsequent re-equilibration afterAQ3 the pulse is turned off. Analysis of the atomic dynamics indicates that the types of defects formed depend on the pulse energy and exposure duration. By varying the exposed area, we determine that the shape of the ablated area is not only a function of the pulse energy, but also of the beam spot size and pulse repetition. Furthermore, we apply a machine learning approach to extrapolate our simulated data to experimental length scales and reproduce the trends in ablated area as a function of temperature. Furthermore, our study provides a first step towards understanding the design parameters for graphene nano-patterning.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1993

GDCF - An interactive approach to domain connectivity among systems of overset grids

The graphical domain connectivity function (GDCF) graphical interface, which was designed to address the need to simplify hole cutter shape selection and positioning in order to exploit the computational savings obtainable through the domain connectivity function (DCF) is described. GDCF was used to prepare data for the V22 tilt-rotor geometry, and data input time was decreased by an order of magnitude. The combined use of GDCF and DCF to satisfy domain connectivity requirements for systems of overset grids is found to minimize both human and computational resources.

Mccann, Karen M.↗
NASA NTRS1990

A geometric representation scheme suitable for shape optimization

A geometric representation scheme is outlined which utilizes the natural design variable concept. A base configuration with distinct topological features is created. This configuration is then deformed to define components with similar topology but different geometry. The values of the deforming loads are the geometric entities used in the shape representation. The representation can be used for all geometric design studies; it is demonstrated here for structural optimization. This technique can be used in parametric design studies, where the system response is defined as functions of geometric entities. It can also be used in shape optimization, where the geometric entities of an original design are modified to maximize performance and satisfy constraints. Two example problems are provided. A cantilever beam is elongated to meet new design specifications and then optimized to reduce volume and satisfy stress constraints. A similar optimization problem is presented for an automobile crankshaft section. The finite element method is used to perform the analyses.

Tortorelli, Daniel A.↗
NASA NTRS1985

Shaft mode shape demonstration

The dynamic response of a rotating machine is directly influenced by its geometric configuration and all aspects of the rotor construction. These determine two significant parameters, mass distribution and stiffness, which yield a spectrum of natural frequencies and mode shapes. The mode shapes can be presented as snapshots of the characteristic amplitude/phase reponse patterns of the shaft, due to the major forcing function of unbalance, at different rotative speeds. To demonstrate the three shaft mode shapes of the rotor rig using the Shaft Mode Demonstrator and oscilloscopes. The synchronous (1X) amplitude and phase of the rotor vibration in the vertical direction from several points along the shaft is displayed on corresponding points of the demonstrator. Unfiltered vibration from vertical and horizontal probe pairs is displayed on the oscilloscopes in orbit format for a dynamic presentation of the mode shape.

Grissom, R.↗
NASA NTRS1994

Application of two procedures for dual-point design of transonic airfoils

Two dual-point design procedures were developed to reduce the objective function of a baseline airfoil at two design points. The first procedure to develop a redesigned airfoil used a weighted average of the shapes of two intermediate airfoils redesigned at each of the two design points. The second procedure used a weighted average of two pressure distributions obtained from an intermediate airfoil redesigned at each of the two design points. Each procedure was used to design a new airfoil with reduced wave drag at the cruise condition without increasing the wave drag or pitching moment at the climb condition. Two cycles of the airfoil shape-averaging procedure successfully designed a new airfoil that reduced the objective function and satisfied the constraints. One cycle of the target (desired) pressure-averaging procedure was used to design two new airfoils that reduced the objective function and came close to satisfying the constraints.

Mineck, Raymond E.↗
NASA NTRS1989

Dynamical behavior of surface tension on rotating fluids in low and microgravity environments

Consideration is given to the time-dependent evolutions of the free surface profile (bubble shapes) of a cylindrical container, partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry in low and microgravity environments. The dynamics of the bubble shapes are calculated for four cases: linear time-dependent functions of spin-up and spin-down in low and microgravity, linear time-dependent functions of increasing and decreasing gravity at high and low rotating cylinder speeds, time-dependent step functions of spin-up and spin-down in low gravity, and sinusoidal function oscillation of the gravity environment in high and low rotating cylinder speeds. It is shown that the computer algorithms developed by Hung et al. (1988) may be used to simulate the profile of time-dependent bubble shapes under variations of centrifugal, capillary, and gravity forces.

Hung, R. J.↗
NASA NTRS1994

The luminosity function for different morphological types in the CfA Redshift Survey

We derive the luminosity function for different morphological types in the original CfA Redshift Survey (CfA1) and in the first two slices of the CfA Redshift Survey Extension (CfA2). CfA1 is a complete sample containing 2397 galaxies distributed over 2.7 steradians with m(sub z) less than or equal 14.5. The first two complete slices of CfA2 contain 1862 galaxies distributed over 0.42 steradians with m(sub z)=15.5. The shapes of the E-S0 and spiral luminosity functions (LF) are indistinguishable. We do not confirm the steeply decreasing faint end in the E-S0 luminosity function found by Loveday et al. for an independent sample in the southern hemisphere. We demonstrate that incomplete classification in deep redshift surveys can lead to underestimates of the faint end of the elliptical luminosity function and could be partially responsible for the difference between the CfA survey and other local field surveys. The faint end of the LF for the Magellanic spirals and irregulars is very steep. The Sm-Im luminosity function is well fit by a Schechter function with M*=-18.79, alpha=-1.87, and phi*=0.6x10(exp -3) for M(sub z) less than or equal to -13. These galaxies are largely responsible for the excess at the faint end of the general CfA luminosity function. The abundance of intrinsically faint, blue galaxies nearby affects the interpretation of deep number counts. The dwarf population increases the expected counts at B=25 in a no-evolution, q(sub 0)=0.05 model by a factor of two over standard no-evolution estimates. These dwarfs change the expected median redshift in deep redshift surveys by less than 10 percent . Thus the steep Sm-Im LF may contribute to the reconciliation of deep number counts with deep redshift surveys.

Marzke, Ronald O.↗
NASA NTRS1973

A method for predicting shock shapes and pressure distributions on two dimensional airfoils at large angles of attack

A method is presented for determining shock envelopes and pressure distributions for two-dimensional airfoils at angles of attack sufficiently large to cause shock detachment and subsonic flow over the windward surface of the airfoil. Correlation functions obtained from exact solutions are used to relate the shock standoff distance at the stagnation and sonic points of the body through a suitable choice for the shock shape. The necessary correlation functions were obtained from perfect gas solutions but may be extended to any gas flow for which the normal shock-density ratio can be specified.

Kaattari, G. E.↗
DOE OSTI2020

Au x Pd (300‐ x ) Alloy Nanoparticles for the Oxygen Reduction Reaction in Alkaline Media

Abstract Au x Pd (300‐ x ) nanoalloys were prepared using a dendrimer‐templating method and their electrocatalytic efficiencies towards the oxygen reduction reaction (ORR) were analyzed in alkaline media. The composition‐dependent PdO x reduction potentials of the Au x Pd (300‐ x ) nanoalloys were correlated to the oxygen‐binding (O‐binding) energy of the catalysts. Multiple PdO x reduction peaks were present for the Au 150 Pd 150 and Au 50 Pd 250 catalysts. These peaks were assigned to the alloyed and bulk‐like Pd active sites on the alloyed surface. The results described here are significant because modulation of the O‐binding energies improved the ORR activity on the nanoalloys. Specifically, a linear trend in O‐binding energies of Au x Pd (300‐ x ) dendrimers (DENs) as a function of Pd composition resulted in a volcano‐shaped trend in ORR activity. The optimal O‐binding energy of Au 50 Pd 250 resulted in an approximate 89 mV shift in PdO x reduction relative to Pd 300 and a shift of approximately 76 mV in ORR peak potential.

Trindell, Jamie A.↗
DOE OSTI2021

Anisotropic Cahn-Hilliard free energy and interfacial energies for binary alloys with pairwise interactions

The original Cahn-Hilliard derivation of the contribution of compositional inhomogeneity to the free energy of a binary alloy with pairwise interactions is extended to include higher-order inhomogeneity terms. For alloys on a cubic lattice, the coefficient of the first inhomogeneity is a second-rank tensor and reduces to a scalar, but it is shown that the second order and the third order inhomogeneity terms are weighted by fourth-rank and sixth-rank tensors, thus resulting in anisotropic contributions. Furthermore, each interaction shell generates a unique set of inhomogeneity coefficients that is determined by the set of vectors connecting an atom to its neighbors on that shell. These coefficients are calculated for fcc and bcc alloys with interactions up fourth nearest neighbors. Phase field simulations based on these extended Cahn-Hilliard free energies are performed to measure interface free energies along specific crystallographic directions as a function of temperature, and to obtain the equilibrium shape of precipitates. Interface free energies, and the resulting anisotropies, are compared to those obtained by discrete models and Monte Carlo simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A review of United States energy-only generator interconnection service policy and considerations for reform

Grid interconnection has emerged as a significant obstacle to the development of new electricity resources. There is growing interest in energy-only interconnection, which is an interconnection service option meant to allow the interconnection of new generators without ensuring their energy deliverability during all hours through the transmission system to customers. This approach potentially avoids upfront congestion-related transmission upgrades but could increase curtailment risk. Interest in energy-only interconnection is shaped by incomplete understanding of how interconnection policy functions in different jurisdictions, a knowledge gap that makes it difficult to determine how energy-only interconnection might be better used or re-designed. In this paper, we provide a regulatory review of energy-only interconnection in U.S. interconnection policy and practice, identifying jurisdictions in which rules are close to -or farther from-the theoretical concept of energy-only interconnection service. We find substantial jurisdictional differences in how energy-only interconnection is implemented, driven by differences in resource adequacy frameworks, real-time transmission operations, and state-level procurement practices. U.S. regulators have preferred local jurisdictional flexibility over federal prescription of interconnection study methods and procedures, which also contributes to differences among regions. Such findings raise fundamental questions about whether competition policies in electricity markets should extend beyond spot energy markets and into more prescriptive guidelines around interconnection rules and market entry. This paper sheds light on tensions that energy-only interconnection raises in allowing generators to access the transmission system on an as available basis and discusses how controlling thresholds for congestion-related network upgrades may be a barrier to electricity market entry.

Gorman, Will↗
DOE OSTI2022

Understanding the E balance for water management in hydroxide exchange membrane fuel cells

As a key challenge for hydroxide exchange membrane fuel cells (HEMFCs), understanding water management deeply is critical for performance and durability improvement. Here, in this work, we show that the balance between water generation and phase-change-induced (PCI) flow is the main factor controlling cell voltage over a wide range of conditions where the cells are vulnerable to severe flooding. The regulation of flooding by heat generation can be reflected by a stable voltage with increase of current density in the polarization curve. This PCI balance voltage (E balance ), which determines the shape of polarization curve, is modeled as a function of cell operating conditions and gas diffusion layer (GDL) properties. Temperature, pressure, and thermal conductivity of GDL were found important for tuning the level of E balance , both in HEMFCs and proton exchange membrane fuel cells. The understanding of E balance will help to generate strategies for resolving flooding in HEMFCs, and it offers a new perspective for polarization curve interpretation.

25 ENERGY STORAGE↗
DOE OSTI2025

Essential barrier height and a probabilistic approach in characterizing potential landscape

In this work we propose a probabilistic approach to investigate the shape of landscapes of multi-dimensional potential functions. Under a suitable coupling scheme, two copies of the overdamped Langevin dynamics associated with the potential function are coupled, and the coupling times are collected. Assuming a set of intuitive yet technically challenging conditions on the coupling scheme, it is shown that the tail distributions of the coupling times exhibit qualitatively different dependencies on the noise magnitude for single-well versus multi-well potential functions. More specifically, for convex single-well potentials, the negative tail exponent of the coupling time distribution is uniformly bounded away from zero by the convexity parameter and is independent of the noise magnitude. In contrast, for multi-well potentials, the negative tail exponent decreases exponentially as the noise vanishes, with the decay rate governed by the essential barrier height, a quantity introduced in this paper to characterize the non-convex nature of the potential function. Numerical investigations are conducted for a variety of examples, including the Rosenbrock function, interacting particle systems, and loss functions arising in artificial neural networks. These examples not only illustrate the theoretical results in various contexts but also provide crucial numerical validation of the conjectured assumptions, which are essential to the theoretical analysis yet lie beyond the reach of standard technical tools.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Yb Substitution and Ultralow Thermal Conductivity of the Ca 3– x Yb x AlSb 3 (0 ≤ x ≤ 0.81(1)) System

Here, a series of Yb-substituted Zintl phases in the Ca 3–x Yb x AlSb 3 (0 ≤ x ≤ 0.81(1)) system has been synthesized by initial arc melting and post-heat treatment, and their isotypic crystal structures were characterized by both powder and single crystal X-ray diffraction analysis. All four title compounds adopted the Ca 3 AlAs 3 -type structure (space group Pnma, Pearson code oP28, Z = 4). The overall structure can be described as a combination of the 1-dimensional (1D) infinite chain of ∞ 1 [Al(Sb 2 Sb 2/2 )] formed by two vertices sharing [AlSb 4 ] tetrahedral moieties and three Ca 2+ /Yb 2+ mixed sites located in between these 1D chains. The charge balance and the resultant independency of the 1D chains in the title system were explained by the Zintl-Klemm formalism [Ca 2+ /Yb 2+ ] 3 [(4b-Al 1– )(1b-Sb 2– ) 2 (2b-Sb 1– ) 2/2 ]. A series of DFT calculations proved that (1) the band overlap between the d-orbital states from two types of cations and the p-orbital states from Sb at the high symmetry Γ point implied a heavily doped degenerate semiconducting behavior of the quaternary Ca 2 YbAlSb 3 model and (2) the site preference of Yb for the M1 site was due to the electronic-factor criterion based on the Q values of each atomic site. The electron localization function calculations also proved that the two different shapes of lone pairs of the Sb atoms—the “umbrella-shape” and the “C-shape”—are determined by local geometry and the coordination environment on the anionic frameworks. Thermoelectric measurements of the quaternary title compound Ca 2.19(1) Yb 0.81 AlSb 3 showed an approximately two times larger ZT value than that of ternary Ca 3 AlSb 3 at 623 K due to increased electrical conductivity and ultralow thermal conductivity originated from Yb substitution for Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Flat epitaxial quasi-1D phosphorene chains

The emergence of peculiar phenomena in 1D phosphorene chains (P chains) has been proposed in theoretical studies, notably the Stark and Seebeck effects, room temperature magnetism, and topological phase transitions. Attempts so far to fabricate P chains, using the top-down approach starting from a few layers of bulk black phosphorus, have failed to produce reliably precise control of P chains. We show that molecular beam epitaxy gives a controllable bottom-up approach to grow atomically thin, crystalline 1D flat P chains on a Ag(111) substrate. Scanning tunneling microscopy, angle-resolved photoemission spectroscopy, and density functional theory calculations reveal that the armchair-shaped chains are semiconducting with an intrinsic 1.80 ± 0.20 eV band gap. This could make these P chains an ideal material for opto-electronic devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

High impact of bacterial predation on cyanobacteria in soil biocrusts

Diverse bacteria lead a life as pathogens or predators of other bacteria in many environments. However, their impact on emerging ecological processes in natural settings remains to be assessed. Here we describe a novel type of obligate, intracellular predatory bacterium of widespread distribution that preys on soil cyanobacteria in biocrusts. The predator, Candidatus Cyanoraptor togatus, causes localized, cm-sized epidemics that are visible to the naked eye, obliterates cyanobacterial net primary productivity, and severely impacts crucial biocrust properties like nitrogen cycling, dust trapping and moisture retention. The combined effects of high localized morbidity and areal incidence result in decreases approaching 10% of biocrust productivity at the ecosystem scale. Our findings show that bacterial predation can be an important loss factor shaping not only the structure but also the function of microbial communities.

59 BASIC BIOLOGICAL SCIENCES↗