Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Phosphatidylinositol phosphates modulate interactions between the StarD4 sterol trafficking protein and lipid membranes

There is substantial evidence for extensive nonvesicular sterol transport in cells. For example, lipid transfer by the steroidogenic acute regulator-related proteins (StarD) containing a StarT domain has been shown to involve several pathways of nonvesicular trafficking. Among the soluble StarT domain–containing proteins, StarD4 is expressed in most tissues and has been shown to be an effective sterol transfer protein. However, it was unclear whether the lipid composition of donor or acceptor membranes played a role in modulating StarD4-mediated transport. Here, we used fluorescence-based assays to demonstrate a phosphatidylinositol phosphate (PIP)-selective mechanism by which StarD4 can preferentially extract sterol from liposome membranes containing certain PIPs (especially, PI(4,5)P 2 and to a lesser degree PI(3,5)P2). Monophosphorylated PIPs and other anionic lipids had a smaller effect on sterol transport. This enhancement of transport was less effective when the same PIPs were present in the acceptor membranes. Furthermore, using molecular dynamics (MD) simulations, we mapped the key interaction sites of StarD4 with PIP-containing membranes and identified residues that are important for this interaction and for accelerated sterol transport activity. We show that StarD4 recognizes membrane-specific PIPs through specific interaction with the geometry of the PIP headgroup as well as the surrounding membrane environment. Finally, we also observed that StarD4 can deform membranes upon longer incubations. Taken together, these results suggest a mechanism by which PIPs modulate cholesterol transfer activity via StarD4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bayesian and variational Bayesian approaches for flows in heterogeneous random media

In this paper, we study porous media flows in heterogeneous stochastic media. We propose an efficient forward simulation technique that is tailored for variational Bayesian inversion. As a starting point, the proposed forward simulation technique decomposes the solution into the sum of separable functions (with respect to randomness and the space), where each term is calculated based on a variational approach. This is similar to Proper Generalized Decomposition (PGD). Next, we apply a multiscale technique to solve for each term (as in ) and, further, decompose the random function into 1D fields. As a result, our proposed method provides an approximation hierarchy for the solution as we increase the number of terms in the expansion and, also, increase the spatial resolution of each term. We use the hierarchical solution distributions in a variational Bayesian approximation to perform uncertainty quantification in the inverse problem. We conduct a detailed numerical study to explore the performance of the proposed uncertainty quantification technique and show the theoretical posterior concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identifying arbitrary parameter zonation using multiple level set functions

In this paper, we extended the analytical level set method [1, 2] for identifying a piece-wisely heterogeneous (zonation) binary system to the case with an arbitrary number of materials with unknown material properties. In the developed level set approach, starting from an initial guess, the material interfaces are propagated through iterations such that the residuals between the simulated and observed state variables (hydraulic head) is minimized. We derived an expression for the propagation velocity of the interface between any two materials, which is related to the permeability contrast between the materials on two sides of the interface, the sensitivity of the head to permeability, and the head residual. We also formulated an expression for updating the permeability of all materials, which is consistent with the steepest descent of the objective function. The developed approach has been demonstrated through many examples, ranging from totally synthetic cases to a case where the flow conditions are representative of a groundwater contaminant site at the Los Alamos National Laboratory. These examples indicate that the level set method can successfully identify zonation structures, even if the number of materials in the model domain is not exactly known in advance. Although the evolution of the material zonation depends on the initial guess field, inverse modeling runs starting with different initial guesses fields may converge to the similar final zonation structure. These examples also suggest that identifying interfaces of spatially distributed heterogeneities is more important than estimating their permeability values.

97 MATHEMATICS AND COMPUTING↗

Selective laser melting of oxide dispersion strengthened MA956 alloy and its surface finishing by magnetic field assisted finishing

Selective laser melting (SLM) is a prominent metal additive manufacturing (AM) capable of processing a myriad of engineering materials with high precision and design freedom. However, similar to other AM processes, poor surface finishing has been an omnipresent problem in SLM technology. In this study, magnetic field assisted finishing (MAF) was used to finish SLM fabricated oxide dispersion strengthened (ODS) MA956, an iron-chromium-aluminum alloy. The effect of laser processing parameters on part density and surface roughness was first studied. Using a multi-objective optimization technique, the optimal parameters to obtain the highest density and lowest surface roughness were determined. Finally, MAF was applied to the parts built with the obtained optimal SLM parameters, but without significant improvement on the surfaces of as-printed samples. Hence, the surfaces of as-printed samples were post-processed (ground) to yield better initial surface conditions prior to MAF. The effect of initial roughness, iron particles size, and abrasive size on MAF performance was studied. Initial roughness had the most dominant effect followed by abrasive size. The underlying mechanism behind the dependency on initial roughness on final surface quality was analyzed by studying the change on the surface profiles with different starting initial roughness. The initial roughness required for MAF to be effective was determined. In conclusion, using the optimal processing conditions, MAF was applied to the post-processed samples to attain the final average surface roughness (R a ) as little as 0.36 μm starting from initial average roughness (R a ) of 1.53 μm.

36 MATERIALS SCIENCE↗

Monte Carlo Simulation of Borosilicate Glass Dissolution using Molecular Dynamics-Generated Glass Structures

Atomic-scale insights into the dissolution mechanisms of borosilicate glasses are critical to the development of the waste form corrosion models that inform performance assessments of nuclear waste disposal facilities. Monte Carlo (MC) simulations have been instrumental in advancing the state of knowledge of borosilicate glass dissolution; however, all such simulations to date have relied on lattices to represent the amorphous glass structure, thereby potentially introducing artifacts. Therefore, a new approach, referred to as the amorphous MC approach, has been developed whereby glass structures generated from molecular dynamics simulations are used as starting points for MC simulations of glass dissolution. MC simulations of sodium borosilicate glasses that covered a wide compositional range were performed and revealed correlations between dissolution rate and structural features of the glasses. Notably, the lattice MC approach predicted the fraction of tetrahedral boron to have a lesser influence on the dissolution rate than computed with the amorphous MC approach. The lattice MC simulations also overestimated the dissolution rate for a given glass composition. These findings highlight the importance of using truly amorphous structures in MC simulations of glass corrosion.

Kerisit, Sebastien N.↗

Investigation of Path Dependence in Commercial Li-ion Cells Chosen for PHEV Duty Cycle Protocols (paper)

Path dependence is emerging as a premier issue of how electrochemical cells age in conditions that are diverse and variable in the time domain. For example, lithium-ion cells in a vehicle configuration will experience a variable combination of usage and rest periods over a range of temperature and state of charge (SOC). This is complicated by the fact that some aging can actually become worse (or better) when a lithium-ion cell is idle for extended periods under calendar-life (calL) aging, as opposed to cycle-life (cycL) conditions where the cell is used within a predictable schedule. The purpose of this study is to bridge the gap between highly idealized and controlled laboratory test conditions and actual field conditions regarding PHEV applications, so that field-type aging mechanisms can be mimicked and quantified in a repeatable laboratory setting. The main parameters are the magnitude and frequency of the thermal cycling, looking at isothermal, mild, and severe scenarios. To date, little is known about Li-ion aging effects caused by thermal cycling superimposed onto electrochemical cycling, and related path dependence. This scenario is representative of what Li-ion batteries will experience in vehicle service, where upon the typical start of a HEV/PHEV, the batteries will be cool or cold, will gradually warm up to normal temperature and operate there for a time, then will cool down after the vehicle is turned off. Such thermal cycling will occur thousands of times during the projected life of a HEV/PHEV battery pack. We propose to quantify the effects of thermal cycling on Li-ion batteries using a representative chemistry that is commercially available. The secondary Li-ion cells used in this study are of the 18650 configuration, have a nominal capacity rating of 1.9 Ah, and consist of a {LiMn2O4 + LiMn(1/3)Ni(1/3)Co(1/3)O2} cathode and a graphite anode. Electrochemical cycling is based on PHEV-relevant cycle-life protocols that are a combination of charge depleting (CD) and charge sustaining (CS) modes discussed in the Battery Test Manual for Plug-in Hybrid Electric Vehicles (INL, March 2008, rev0). A realistic duty cycle will involve both CD and CS modes, the proportion of each defined by the severity of the power demands. We assume that the cells will start each cycling day at 90% SOC, and that they will not be allowed to go below 35% SOC, with operation around 70% SOC being a nominal condition. The 35, 70, and 90% SOC conditions are also being used to define critical aspects of the related reference performance test (RPT) for this investigation. There are three primary components to the RPT, all assessed at room temperature: (A) static and residual capacity (SRC) over a matrix of current, (B) kinetics and pulse performance testing (PPT) over current for SOCs of interest, and (C) EIS for SOCs of interest. The RPT is performed on all cells every 30 day test interval, as well as a pulse-per-day to provide a quick diagnostic snapshot. Where feasible, we utilize various elements of Diagnostic Testing (DT) to characterize performance of the cells and to gain mechanistic-level knowledge regarding both performance features and limitations. We will present the rationale behind the experimental design, early data, and discuss the fundamental tools used to elucidate performance degradation mechanisms.

25 ENERGY STORAGE↗

Modelling single atom catalysts for water splitting and fuel cells: A tutorial review

Here, in this tutorial review, we report the state-of-the-art of the modeling approaches of Single Atom Catalysts (SAC) for water splitting and fuel cells reactions. The discussion applies for Hydrogen Evolution Reaction (HER), Oxygen Reduction Reaction (OER), Hydrogen Oxidation Reaction (HOR), and Oxygen Reduction Reaction (ORR). The main scope of this work is to underline the relevant aspects of SACs modelling. On the one hand, the review could help computational chemists aiming to start the study of SACs. On the other hand, experimentalists could find the critical analysis of DFT results of interest to understand better the strengths and weaknesses of simulations, and how to interpret computational results. After an introductory section of SACs, we start by briefly presenting the state-of-the-art methodologies. Then, we analyze the critical aspects for a reliable prediction of the electronic properties, and we discuss the robustness of the structural models and ways to validate them. Furthermore, we discuss the main approaches to predict catalytic activity and selectivity, which is the final goal of the computational catalysis. We conclude this review with a critical analysis of the current challenges in the field, and the main limitations of the modeling approaches that are described.

25 ENERGY STORAGE↗

Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products

Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method at a constant pH value of 8. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange at pH 9. The samples have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), and FT-IR spectroscopy. Their thermal stability has been assessed by thermogravimetric and differential thermal analyses (TG-DTA) and mass spectrometric analysis of the evolved gases. The PXRD patterns of the solids calcined at 800 deg. C show diffraction lines corresponding to Cd(Al)O and spinel-type materials, which precise nature (CdAl{sub 2}O{sub 4}, Cd{sub 1-x}Fe{sub 2+x}O{sub 4}, or Cd{sub x}Fe{sub 2.66}O{sub 4}) depends on location and concentration of iron in the parent material or precursor. - Graphical abstract: Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange. Calcination at 800 deg. C shows diffraction lines corresponding to CdO and to spinel-type materials. SEM micrograph of sample CdAlFe-N-0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A low-temperature route for the synthesis of nanocrystalline LaB{sub 6}

Nanocrystalline lanthanum hexaboride (LaB{sub 6}) with mean particle size of 30 nm has been successfully synthesized at 400 deg. C in an autoclave starting from metallic magnesium powder, NaBH{sub 4} and LaCl{sub 3}. In this case, by using B{sub 2}O{sub 3} instead of NaBH{sub 4}, LaB{sub 6} nanocubes with mean size of {approx}200 nm were formed at 500 deg. C. The X-ray diffraction (XRD) pattern can be indexed as cubic LaB{sub 6} with the lattice constant of a=4.151 A for LaB{sub 6} nanoparticles and 4.154 A for LaB{sub 6} nanocubes. An atomic ratio of La and B as 1:5.94 was determined from EDS for LaB{sub 6} nanoparticles. XPS data of LaB{sub 6} nanocubes indicate the atomic ratio of La to B as 1:5.95. Raman spectra indicate the formation of LaB{sub 6}. - Graphical abstract: Nanocrystalline lanthanum hexaboride (LaB{sub 6}) with mean particle size of 30 nm has been successfully synthesized at 400 deg. C in an autoclave starting from NaBH{sub 4}, LaCl{sub 3} and metallic magnesium powder. In this case, by using B{sub 2}O{sub 3} instead of NaBH{sub 4}, LaB{sub 6} nanocubes with mean size of {approx}200 nm were formed at 500 deg. C. In comparison with previous routes, the present route allows for the formation of nanocrystalline LaB{sub 6} through a simpler process and at a much lower synthesis temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topotactic insertion of lithium in the layered structure Li{sub 4}VO(PO{sub 4}){sub 2}: The tunnel structure Li{sub 5}VO(PO{sub 4}){sub 2}

A new V(III) lithium phosphate Li{sub 5}VO(PO{sub 4}){sub 2} has been synthesized by electrochemical insertion of lithium into Li{sub 4}VO(PO{sub 4}){sub 2}. This phase, which crystallizes in the space group I4/mcm, exhibits a tunnel structure closely related to the layered structure of Li{sub 4}VO(PO{sub 4}){sub 2} and to the tunnel structure of VO(H{sub 2}PO{sub 4}){sub 2}. The topotactic reactions that take place during lithium exchange and intercalation, starting from VO(H{sub 2}PO{sub 4}){sub 2} and going to the final phase Li{sub 5}VO(PO{sub 4}){sub 2} are explained on the basis of the flexible coordinations of V{sup 4+} and V{sup 3+} species. The electrochemical and magnetic properties of this new phase are also presented and explained on the basis of the structure dimensionality. - Graphical abstract: Electrochemical synthesis of a new 3D V(III) lithium phosphate, Li{sub 5}VO(PO{sub 4}){sub 2}. Starting from the 2D Li{sub 4}VO(PO{sub 4}){sub 2}, the topotactic reaction that take place during lithium intercalation is explained on the basis of the flexible coordinations of V{sup 4+} and V{sup 3+} species.

36 MATERIALS SCIENCE↗

Sol-gel synthesis of nanocomposite materials based on lithium niobate nanocrystals dispersed in a silica glass matrix

With the final goal to obtain thin films containing stoichiometric lithium niobate nanocrystals embedded in an amorphous silica matrix, the synthesis strategy used to set a new inexpensive sol-gel route to prepare nanocomposite materials in the Li{sub 2}O-Nb{sub 2}O{sub 5}-SiO{sub 2} system is reported. In this route, LiNO{sub 3}, NbCl{sub 5} and Si(OC{sub 2}H{sub 5}){sub 4} were used as starting materials. The gels were annealed at different temperatures and nanocrystals of several phases were formed. Futhermore, by controlling the gel compositions and the synthesis parameters, it was possible to obtain LiNbO{sub 3} as only crystallizing phase. LiNbO{sub 3}-SiO{sub 2} nanocomposite thin films on Si-SiO{sub 2} and Al{sub 2}O{sub 3} substrates were grown. The LiNbO{sub 3} average size, increasing with the annealing temperature, was 27 nm for a film of composition 10Li{sub 2}O-10Nb{sub 2}O{sub 5}-80SiO{sub 2} heated 2 h at 800 deg. C. Electrical investigation revealed that the nanocrystals size strongly affects the film conductivity and the occurrence of hysteretic current-voltage curves. - Graphical abstract: Sol-gel synthesis of nanocomposite materials in the Li{sub 2}O-Nb{sub 2}O{sub 5}-SiO{sub 2} system is reported. The goal was to synthesize thin films containing lithium niobate nanocrystals embedded in a silica matrix. Starting from LiNO{sub 3}, NbCl{sub 5} and Si(OC{sub 2}H{sub 5}){sub 4,} it was possible to obtain LiNbO{sub 3} as only crystallizing phase, nanocrystals size was 27 nm for a film 10Li{sub 2}O-10Nb{sub 2}O{sub 5}-80SiO{sub 2} heated 2 h at 800 deg. C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-temperature structural phase transition in Ca{sub 2}Fe{sub 2}O{sub 5} studied by in-situ X-ray diffraction and transmission electron microscopy

Ca{sub 2}Fe{sub 2}O{sub 5} shows a first-order phase transition from space group Pnma to a modulated structure described in superspace group Imma(00gamma)s00. The transition starts at 947 K during heating and the reverse transition in cooling conditions starts at 923 K, as determined from differential thermal analysis. In-situ high-temperature single-crystal X-ray diffraction experiments revealed a phase coexistence over a range of ca. 25 K. Data collected in this range show a good fit to a combined model of the two simultaneously occurring phases, which was refined using the software JANA2006. In-situ high-temperature transmission electron microscopy (selected area diffraction, dark field and high resolution images) was utilized to prove the existence of Pnma and Imma(00gamma)s00 domains within the temperature range of the phase coexistence. Remaining planar defects were observed within the Pnma phase at temperatures below the phase transition. From the analysis of high-resolution electron micrographs, these defects were proven to be antiphase boundaries with a displacement vector of R=1/2 [111]. - High-temperature HRTEM (zone axis [010]) of a phase boundary between domains of the Pnma (lower left) and Imma(00g)s00 (upper right) structure. Micrograph recorded at 970 K. Corresponding FFT patterns are shown on the right.

36 MATERIALS SCIENCE↗

Mechanosynthesis of nanopowders of the proton-conducting electrolyte material Ba(Zr, Y)O{sub 3-{delta}}

The formation of perovskite nanopowders of the common proton-conducting, electrolyte material Ba(Zr{sub 1-x}Y{sub x})O{sub 3-{delta}} is demonstrated by room temperature mechanosynthesis for the compositional range x=0, 0.058 and 0.148. This is achieved with a planetary ball mill at 650 rpm in zirconia vials, starting from BaO{sub 2} with ZrO{sub 2}, (ZrO{sub 2}){sub 0.97}(Y{sub 2}O{sub 3}){sub 0.03} or (ZrO{sub 2}){sub 0.92}(Y{sub 2}O{sub 3}){sub 0.08} precursors, respectively. Powder X-ray diffraction (XRD) reveals the formation of the perovskite phase in the early stages of milling with phase purity being achieved after milling times of 240 min for composition x=0.058 whereas 420 min is necessary for composition x=0.148. In contrast, traces of ZrO{sub 2} are apparent in composition x=0 even after milling times of 420 min. The use of BaCO{sub 3} as precursor does not allow the formation of the perovskite phase for any composition. The perovskite crystallites are spherical in shape with an average size determined from XRD of ca. 30 nm in agreement with transmission electron microscopy observations. FTIR spectra demonstrate that contamination levels of BaCO{sub 3} in the mechanosynthesized powders are very low. The spherical shape and nanoscale of the crystallites allow densification levels that are highly competitive when compared to BaZrO{sub 3}-based materials formed by alternative synthesis techniques documented in the literature. - Graphical abstract: The formation of perovskite nanopowders of the common proton-conducting, electrolyte, material Ba(Zr{sub 1-x}Y{sub x})O{sub 3-{delta}} is demonstrated by room temperature mechanosynthesis, starting from BaO{sub 2} with ZrO{sub 2}, (ZrO{sub 2}){sub 0.97}(Y{sub 2}O{sub 3}){sub 0.03} or (ZrO{sub 2}){sub 0.92}(Y{sub 2}O{sub 3}){sub 0.08} precursors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

(Ca/Sr)Au{sub x}Cd{sub 1-x}: Stacking variants of the CrB-FeB series

The structural chemistry of binary 1:1 alkaline earth metallides A{sup II}M (M=p-block or late transition element) is dominated by planar M zig-zag chains, which are stacked in different orientations (CrB (c) to FeB (h) type) and with variable stacking distances (types I and II). As a case study of the electronic influences, the substitution of Au against Cd in the respective Ca and Sr aurides was examined by means of experimental, crystallographic and computational methods. Starting from CaAu, up to 11% of Au can be substituted by Cd without a change in the CrB structure type (orthorhombic, space group Cmcm, a=398.2(1), b=1122.6(6), c=460.9(2)pm, Z=4, R1=0.0303). Starting from SrAu (stacking sequence (hc){sub 2}(h{sub 2}c){sub 2}), depending on the proportion of the Cd substitution a successive change to structures with increased hexagonality is observed: In SrAu{sub 0.93}Cd{sub 0.07} (monoclinic, space group P2{sub 1}/m, a=621.3(4), b=472.4(2), c=1216.1(9)pm, beta=96.97(5){sup 0}, Z=6, R1=0.0467) the stacking sequence is h{sub 2c}, i.e. the hexagonality is 66.67%. A slightly more increased Cd content in SrAu{sub 0.78}Cd{sub 0.22} (orthorhombic, space group Pnma, a=3243.3(8), b=474.17(8), c=626.20(9)pm, Z=16, R1=0.0682) drives the hexagonality to 75%, with a (h{sub 3}c){sub 2} stacking sequence known from several rare earth nickel compounds. Further Cd substitution is not possible. However, in the Cd-rich section of the two series, where the CsCl/beta-brass structure type occurs for both alkaline earth elements, a small Au substitution, as determined from powder data by Rietveld refinements, is possible. The substitution limit and the stability ranges of the CsCl and the CrB type can be rationalized from the calculated band structures. Geometrical and electronic criteria are used to compare and discuss the stability ranges in a structural map. - SrAu{sub 0.93}Cd{sub 0.97}, one of the stacking sequences of the CrB/FeB structure type series found in the quasibinary section SrAu-SrCd.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cr and Mn ions on the structure and magnetic properties of GaFeO{sub 3}: Role of the substitution site

Effect of substitution of Cr and Mn in the Fe and Ga sites of GaFeO{sub 3} on the structural parameters and magnetic properties has been investigated by preparing GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3} and Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3} starting with appropriate oxide precursors. It is shown that, starting with Cr or Mn substituted Ga{sub 2}O{sub 3}, one obtains Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3}, while reaction of Cr or Mn substituted {alpha}-Fe{sub 2}O{sub 3} with Ga{sub 2}O{sub 3} yields GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3}. The structural parameters and magnetic properties vary significantly with the substitution site of Cr showing a large decrease in the unit cell parameters as well as the T{sub C} and other magnetic properties when the substitution is at the octahedral Fe (1, 2) site. Substitution of Cr at the octahedral Ga2 site results in marginal changes. Substitution of Mn in the Ga and Fe sites also show differences although the changes themselves are much smaller. First-principles calculations confirm such site-specificity and show how Cr substitution affects the properties differently when substituted at the Ga2 and Fe1 sites. - Graphical abstract: The important role of site-specific substitution of transition metal ions on the structure and magnetic properties of GaFeO{sub 3} has been investigated experimentally and theoretically. Highlights: > Substitution of transition metal ions to specific cation site. > Ionic radii of the cation dictate the disorder associated with the specific site. > Site-specificity explains magnetic ordering and structural parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure response of vacancy ordered maghemite ({gamma}-Fe{sub 2}O{sub 3}) and high pressure transformed hematite ({alpha}-Fe{sub 2}O{sub 3})

Combined XRD and Moessbauer effect spectroscopy studies to high pressures of {approx}30 GPa of vacancy ordered maghemite are presented. The vacancy ordered superstructure is robust and remains intact up to the pressure-induced onset transition to hematite at 13-16 GPa. The pressure transformed hematite is shown to be crystallographically textured, unlike the randomised low pressure maghemite phase. This arises out of a pressure or stress instigated topotactic transformation of the cubic-spinel to hexagonal-corundum structure. The textured sample permits us to obtain information on the spin reorientation behavior of the pressure transformed hematite in compression and decompression sequences. Spin reorientation is restricted to {approx}15 Degree-Sign over wide pressure ranges, attributable to the effect of entrapped vacancies in the high pressure structure. Thus there are structural and magnetic peculiarities specific to pressure transformed hematite not evident in pressurized hematite starting material. These are triggered by the maghemite{yields}hematite transformation. - Graphical abstract: Pressure instigated topotactic transformation of vacancy ordered {gamma}-Fe{sub 2}O{sub 3}{yields}{alpha}-Fe{sub 2}O{sub 3}. There is restricted spin (B{sub hf}) reorientation in the new pressure transformed hematite due to entrapped vacancies. The change in direction of V{sub zz} signifies a distortion of the FeO{sub 6} octahedral local environment. Highlights: Black-Right-Pointing-Pointer Robust vacancy ordered superstructure in maghemite to high pressures. Black-Right-Pointing-Pointer Pressure instigated topotactic transformation to hematite and subsequent texture. Black-Right-Pointing-Pointer Defect trapping in the pressure transformed hematite. Black-Right-Pointing-Pointer Entrapped defects restricts spin reorientation in pressure transformed hematite. Black-Right-Pointing-Pointer Contrasting behavior with pressurized hematite starting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mo{sub x}Cu{sub 1-x}Sr{sub 2}YCu{sub 2}O{sub y} (0.3{<=}x{<=}1) revisited: Superconductivity, magnetism and the molybdenum oxidation state

A systematic study is reported on the range of stability of molybdenum substituted Sr-based 123 compounds with Mo-Sr-Y-Cu system, synthesized under ambient pressure. All materials crystallize in the space group: P4/mmm and the observed solubility limit of Mo is rather low in this structure because secondary phases start to form as soon as x>0.3 in nominal composition is reached. The antiferromagnetic property in all superconducting multiphase samples can be attributed to the secondary phase Y{sub 2}Cu{sub 2}O{sub 5}. The influence of oxygen annealing on the changes in electronic structure for the pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} system associated with a non-superconductor to superconductor transition has been investigated by means of X-ray photoelectron spectroscopy, powder X-ray diffraction, magnetic susceptibility and specific-heat measurements. We unambiguously show the predominance of the Mo{sup 5+} state over the Mo{sup 6+} one on both as-synthesized and annealed phases; annealing under an oxygen atmosphere enhances both the Mo{sup 6+} and Cu{sup 2+} amounts. We suggest that the enhancement of Mo{sup 6+} under oxygen annealing is in close relation with the decrease in the O 2p{yields}Cu 3d charge-transfer energy resulting in superconducting properties. - Graphical abstract: A study on the ambient-pressure synthesis and the range of stability of complex perovskites in the system Y-Sr-Cu-Mo shows that the solubility limit of Mo is rather low in this structure ({approx}30%). Secondary phases (detected by XRD) start to form for x>0.3 in nominal composition. All materials crystallize in the space group: P4/mmm. Antiferromagnetism in all superconducting multiphase samples is attributed to the secondary phase Y{sub 2}Cu{sub 2}O{sub 5}. Pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} studied by means of powder X-ray diffraction, magnetic susceptibility and specific-heat measurements. Changes in electronic structure for the pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} system associated with a non-superconductor to superconductor transition have been investigated by means of X-ray photoelectron spectroscopy (XPS). Highlights: Black-Right-Pointing-Pointer Solubility limit of Mo is rather low in Mo{sub x}Cu{sub 1-x}Sr{sub 2}YCu{sub 2}O{sub y} (x{approx}0.3). Black-Right-Pointing-Pointer Antiferromagnetism and superconductivity do not coexist. Black-Right-Pointing-Pointer Pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} (T{sub c} Almost-Equal-To 30 K) prepared and characterized. Black-Right-Pointing-Pointer XPS shows that Mo{sup 5+} predominates over Mo{sup 6+}. Black-Right-Pointing-Pointer Annealing under O{sub 2} enhances Mo{sup 6+} and Cu{sup 2+} states.

36 MATERIALS SCIENCE↗

Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile

The solid state reaction of diaminomaleonitrile (DAMN) with aluminum via both mechanochemical and thermal treatment routes was studied by X-ray diffraction and Fourier transform infrared spectroscopy. During the milling process, the reaction starts with the deammoniation of the DAMN molecules, followed by the formation of nanostructured AlN powder as the main solid product after milling for 7 h. The reactivity of the mixed powder was also investigated during the conventional thermal treatment process using differential scanning calorimetry, derivative thermogravimetry and thermogravimetric analysis. The results reveal that DAMN starts to polymerize at 192 Degree-Sign C by the elimination of the amine groups. Furthermore, increasing the annealing temperature leads to the formation of a nitrogen-containing carbonaceous material with the structure similar to non-crystalline carbon. However, no evidence for the formation of AlN was observed in the annealed samples even at temperatures as high as the Al melting point. - Graphical abstract: AlN nanoparticles obtained after milling of Al and diaminomaleonitrile (DAMN) for 12 h. Highlights: Black-Right-Pointing-Pointer Solid state reaction of diaminomaleonitrile (DAMN) with Al was studied via mechanochemical and thermal treatment routs. Black-Right-Pointing-Pointer Nanocrystalline AlN was successfully synthesized by the mechanochemical process. Black-Right-Pointing-Pointer The C/N material was formed by polymerization of DAMN during the thermal treatment process. Black-Right-Pointing-Pointer No reaction between DAMN and Al was detected during the thermal treatment method.

36 MATERIALS SCIENCE↗