Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reductive removal of pertechnetate and chromate by zero valent iron under variable ionic strength conditions

Radioactive technetium-99 (Tc) present in waste streams and subsurface plumes at legacy nuclear reprocessing sites worldwide poses potential risks to human health and the environment. This research comparatively evaluated efficiency of zero valent iron (ZVI) toward reductive removal of Tc(VII) in presence of Cr(VI) from NaCl and Na 2 SO 4 electrolyte solutions under aerobic conditions. In both electrolytes, anticorrosive Cr(VI) suppressed oxidation of ZVI at elevated concentrations resulting in the delay of initiation of Tc(VII) reduction to Tc(IV)). In the absence of Cr(VI), no such delay was observed in the analogous systems. At low ionic strength, retarded ZVI oxidation inhibited Tc(VII) reduction in part due to the competing thermodynamically more favorable reduction of Cr(VI) to Cr(III); this effect was particularly pronounced in the chloride medium at the ionic strength ? 0.1. Higher ionic strength favored reduction of both Tc(VII) and Cr(VI), which followed a second-order reaction rate in both electrolytes attributed to the more efficient iron oxidation as evident from x-ray diffraction and electron microscopy measurements. Magnetite was the primary iron oxide phase, and its higher fraction in the SO 4 2- solutions facilitated reductive removal of Tc(VII) and Cr(VI). In the Cl- matrix, Cr(VI) promoted further oxidation of magnetite as well as formation of chromite diminishing overall reductive capacity of this system and resulting in less effective removal of Tc(VII) compared to the SO 4 2- solutions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Ductility evaluation of nitrided Zircaloy-4 cladding by ring compression testing

Here, this study evaluated the embrittlement of Zircaloy-4 cladding by dry air and dry nitrogen environments as a function of process temperature and duration of exposure. A Netzsch thermogravimetric analyzer was used to measure the mass gain of cladding sections over time with specified temperature and gas flow programs. Oxidation of Zircaloy in dry air produced a brittle ZrO 2 layer with ductile unreacted metal. In contrast, nitridation of Zircaloy had a slower reaction rate but produced a brittle cladding that was more easily breached during ring compression tests. The ring compression tests demonstrated that ductility of Zircaloy cladding decreases as nitrogen pickup increases; a ductile-to-brittle transition occurs near a mass gain of 2.1 wt %. Nitridation showed minimal temperature dependency in ductility degradation, whereas oxidation showed significant temperature dependency in ductility degradation, with severe embrittlement occurring at 1200 °C. Optical micrographs confirmed the formation of uniform ZrN layers (approximately 12 µm thick) on the cladding surface, indicating that cladding embrittlement is primarily the result of nitrogen diffusion rather than metal layer thinning.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Kinetic study of the azo – Hydrazone photoinduced mechanism in complexes with a -Re(CO) 3 L 0/+ core by flash photolysis

The photoprocesses of three rhenium(I) tricarbonyl complexes, fac-Re(NN)(CO) 3 L 0/+ , bearing an azo/hydrazone ligand, NN, and L = Cl, Br or CH 3 CN as axial ligand, were studied by time-resolved spectroscopic techniques. Flash irradiation of deaerated solutions of the complexes in acetonitrile photogenerated intermediates with intense optical absorptions in the UV–vis spectral region of the hydrazone ligand. The decay of the intermediates photogenerated with the Cl, Br and CH 3 CN ligands in the axial position proceeds by three different mechanisms. For the fac-Re(NN)(CO) 3 Cl, a three-step mechanism involving isomerization, tautomerization and rotation accounts for the spectroscopic transformations. In contrast to the flash photolysis result, the continuous photolysis of the complex in acetonitrile does not show spectroscopic changes associated with the generation of a stable product, i.e., the complex exhibits a photoreversible behavior. The first step observed in the flash irradiation of fac-Re(NN)(CO) 3 Cl, is missing in the decay of the photogenerated intermediates with fac-Re(NN)(CO) 3 Br and fac-[Re(NN)(CO) 3 CH 3 CN] + . A possible reason for this absence is that the process is too fast for the time-response of the flash photolysis set-up. Time-resolved spectra and associated reaction rate data for the Re(I) complexes are communicated and discussed. Finally, DFT calculations support a plausible E → Z mechanism with thermal back-isomerization mediated by tautomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analytical modeling for redox flow battery design

Deeper market penetration of redox flow batteries requires optimization of the cell performance. Though important for optimization, detailed analytical solutions have not been developed for electrolyte flow, mass and charge transport, and reaction kinetics within redox flow batteries. To this end, here we present analytical solutions to active species concentration and over-potential based on advection-diffusion transport for ions and Bulter-Volmer model for interface reaction kinetics. The solutions were validated with results from a finite element model. These solutions were then applied to investigate the relationship between over-potential and state of charge, current density, reaction rate constant, flow velocity, diffusivity, total active species concentration, and electrode structure. Explicit formulas were identified for minimum activation over-potential and limiting current density as well as their dependence on electrolyte properties, operation conditions, and electrode structure. With our new mathematical formulas, this work provides a theoretical framework for flow battery design.

25 ENERGY STORAGE↗
DOE OSTI2025

BBN-simple: How to bake a universe-sized cake

Big Bang Nucleosynthesis (BBN), the process of creation of lightest elements in the early universe, is a highly robust, precise, and ultimately successful theory that forms one of the three pillars of the standard hot-Big-Bang cosmological model. Existing theoretical treatments of BBN and the associated computer codes are accurate and flexible, but are typically highly technical and opaque, and not suitable for pedagogical understanding of the BBN. Here we present BBN-simple - a from-scratch numerical calculation of the lightest element abundances pitched at an advanced undergraduate or beginning graduate level. We review the physics of the early universe relevant for BBN, provide information about the reaction rates, and discuss computational-mathematics background that is essential in setting up a BBN calculation. Here, we calculate the abundances of the principal nuclear species in a standard cosmological model, and find a reasonably good agreement with public precision-level BBN codes.

Big bang nucleosynthesis↗
DOE OSTI2025

The upgraded summing NaI(Tl) (SuN++) absorption spectrometer

Simulations of astrophysical processes require a plethora of nuclear physics input. In particular, models of neutron-capture nucleosynthesis like the s, i, and r processes require β-decay information and experimentally constrained neutron-capture reaction rates. Past experiments with the 4π Summing NaI(Tl) (SuN) total absorption spectrometer have provided these physics quantities. Here, we outline an upgrade of SuN to SuN++, where 20 new segments (12 NaI(Tl) and 8 CeBr 3 ) have been integrated into the pre-existing SuN total absorption spectrometer to provide increased energy and time resolution in β-decay experiments. The details of the newly upgraded SuN++ total absorption spectrometer are discussed with results from the commissioning experiment at the Facility for Rare Isotope Beams (FRIB) utilizing a 70 Cu beam.

CeBr3↗
DOE OSTI2025

Ab initio calculations of scattering and fusion reactions

We review recent advancements achieved within the ab initio no-core shell model with continuum (NCSMC), a unified first-principle (or, ab initio) approach to nuclear bound and continuum states. We highlight its application to reactions of astrophysical interests, including the 7 Be(p, γ) 8 B solar fusion and α-α scattering, and to the structure of the exotic 12 Be nucleus. Furthermore, our findings provide a solid foundation for integrating ab initio calculations with experimental measurements, allowing for more precise evaluations of key thermonuclear reaction rates at astrophysical energies, and offer new insights into the factors that contribute to the emergence of clustering.

Quaglioni, Sofia [Lawrence Livermore National Labo↗
DOE OSTI2021

Methane generation from low-maturity coals and shale source rocks at low temperatures (80–120 °C) over 14–38 months

This study contributes long-term (14 to 38 months) experimental evidence for geocatalytically mediated methanogenesis in immature to early mature shale and coal source rocks at temperatures from 80 to 120 °C. Borosilicate glass tubes with pre-outgassed coal and shale source rock chips and water were sealed under vacuum, sterilized, heated isothermally, and finally opened in connection with a vacuum line where headspace gases methane (CH 4 ) and carbon dioxide (CO 2 ) were collected. The possibility of admitting pre-existing CH 4 from closed pores into product gases during heating experiments was evaluated by comparative ball milling of original and heated rock chips, followed by quantitation of released gases with a novel closed-circuit laser-based SARAD RTM2200 gas detector system with sub-µmol sensitivity. The yields of produced CH 4 from individual source rocks were corrected by subtracting the amounts of pre-existing CH 4 from formerly closed pores in original source rocks that had leaked during long-term heating. Different shales and coals express contrasting propensities to geocatalytically generate CH 4 and CO 2 , with CH 4 yields ranging from 0.1 to 5.5 µmol g-1 total organic carbon (TOC). CH 4 yields from two petrographically different samples of Springfield Coal with comparable thermal maturity suggest that liptinite expresses a far higher propensity for methanogenesis, but liberates less CO 2 than vitrinite. Shale from the Second White Specks Formation generated approximately 10 times more CH 4 than New Albany Shale per g of TOC, further suggesting complex controls on CH 4 generation during catalytic methanogenesis. Higher temperature can enhance the activities of catalytic methanogenesis. Here, the extrapolation of laboratory-based reaction rates to natural conditions in organic-rich buried sediments suggests that geocatalytic methanogenesis can be fast enough in some source rocks to generate economically sizeable gas plays from immature to early mature source rocks over geologic time.

03 NATURAL GAS↗
DOE OSTI2022

Diffusion-limited hydrolysis in polymeric materials

Polymer degradation under aggressive environmental stressors often develops heterogeneities due to diffusion-limited reaction phenomena. This is well established for diffusion-limited oxidation (DLO), which is known to occur for most polymeric materials at elevated temperatures but has been less summarized for the conditions of diffusion-limited hydrolysis (DLH). Here, an overview of hydrolysis for several materials and a computational model, analogous to the underlying equations for DLO, able to define this diffusion-reaction system is presented. A systematic study of the influence of various parameters, such as water diffusivity, reaction rate and order, and a more in-depth focus on residual isocyanate hydrolysis in a polymeric methylene diphenyl diisocyanate (pMDI) based polyurethane (PU) foam is given. For this system, we present experimental data for model ‘input’ parameters and discuss predictions for different conditions. We conceptually compare the behavior of diffusion-limited oxidation to that of diffusion-limited hydrolysis (DLH). With the mathematical framework and key material properties presented herein, any DLH phenomena following Fickian diffusion behavior can be understood, modeled, and predicted.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights on keto-hydroperoxide formation from O 2 addition to the beta-tetrahydrofuran radical

Cyclic ethers provide an interesting case study of low-temperature oxidation chemistry, especially in relevance to biofuels. A recent experimental study revealed new questions regarding the low-temperature oxidation mechanism of tetrahydrofuran (THF) concerning the formation of keto-hydroperoxides. In particular, keto-hydroperoxides originating from the THF-β radical were not captured accurately by current literature models, motivating this work to calculate the energetics of the first and second O 2 -addition pathways for THF radicals. Electronic structure calculations at the CCSD(T)/cc-pV∞Z//M06-2X/cc-pVTZ level of theory were used to generate potential energy surfaces for the α-C and β-C THF radicals and subsequent pathways to the formation of the keto-hydroperoxide isomers. These are the first theoretical calculations of the second O 2 -addition radical pathways for the THF-β radical. Results from the theorical work provided further insight into the low-temperature oxidation of THF. This included identifying the pathways most likely to form the keto-hydroperoxide isomers observed in prior experimental work; and detecting that the shortcomings in prior models are likely due to uncertainties in R + THF abstraction reaction rates. Here, these conclusions will motivate future work for accurate THF kinetic model development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydroxypyridinone-based stabilization of Np(IV) enabling efficient U/Np/Pu separations in the Adapted PUREX process

The classical process to recover uranium (U) and plutonium (Pu) from used nuclear fuel using tributyl phosphate (TBP), namely the Plutonium Uranium Redox EXtraction (PUREX) process, is complicated by the persistent presence of neptunium (Np) and thus requires extra purification steps. The concept of Adapted PUREX seeks to achieve Np recovery by adjusting the valence of the metal more effectively, thereby controlling its behavior more precisely. This study introduces the use of an aqueous hydroxypyridinone chelator, 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), to dictate the behavior of Np for recovery and meanwhile simplify cumbersome reprocessing steps. The interactions between Np and HOPO were probed mechanistically by way of absorption spectrophotometry, in conjunction with cyclic voltammetry. UV–Vis-NIR spectra illustrated the reduction of NpO 2 2+ to Np 4+ , with a fast reaction rate. Cyclic voltammetry revealed quasi-reversible processes between the oxidized and reduced forms of the ligand and its Np complexes. The corresponding heterogeneous rate constants (k 0 ) were estimated from the peak-to-peak separation potentials (ΔE p ), at ~ 4 – 35 μm/s for both HOPO and NpHOPO, with scan rates of 0.01 – 0.4 V/s. Meanwhile, the electromotive force (E MF ) as well as the change of Gibbs free energy (ΔG) were assessed from the half-wave potential (E 1/2 ), demonstrating the completeness of NpO 2 2+ reduction to Np 4+ by HOPO. The cumulative formation constant of the resulting NpHOPO complex (logβ 101 ) was determined by metal competition titration to be 42.0 ± 0.6, corroborating the extraordinarily high affinity of HOPO to tetravalent metal ions. Here, the prowess of valence control by HOPO and the high stability of the formed complex resulted in enhanced separations of Np from U and of Pu from U, with a maximum separation factor of ~7000 for both, nearly 90- and 10300-fold higher, respectively, than the values obtained using conventional PUREX formulae.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Thermodynamic control on the decomposition of organic matter across different electron acceptors

The increasing availability of high-resolution characterization of natural organic matter (OM) data has shifted the paradigm of lumped descriptions of OM components and potential microbial activities. Our recent development of a substrate-explicit thermodynamic model uniquely enables incorporating complex OM pools to formulate biogeochemical reaction models based on their elemental compositions. While this previous work facilitates prediction of aerobic respiration of complex OM, it is equally imperative to consider the role of non-oxygenic electron acceptors in regulating OM turnover and the fate of carbon. In this study, we significantly expand our previous model by flexibly incorporating both detailed OM chemistry and electron acceptors other than oxygen. Here, our modeling analysis has revealed substantial variations in the energy status of OM molecules across different soils, which drive the co-occurrence of different electron-accepting processes. We demonstrated the effectiveness of the proposed model using a consistency check with experimental data. Through systematic evaluation of the impact of diverse chemical inputs (both electron donors and acceptors) on OM decomposition, the new model also revealed how key microbial growth parameters such as carbon use efficiency (CUE) and reaction rates vary across different electron-accepting processes. Our model provides a unified framework integrating thermodynamic and kinetic constraints on microbial metabolic activities. It complements traditional kinetic models, which are often designed solely to capture mass fluxes. We conclude that thermodynamic modeling emerges as a powerful tool for describing the mechanisms underlying the interplay between microbial growth and OM chemistry and cycling across different electron acceptors, enhancing our ability to project complex ecosystem behaviors in dynamic environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Stabilization of light-induced effects in Si modules for IEC 61215 design qualification

Standardized testing of commercial photovoltaic modules is widely used around the world and decreases risks of module failures. Such testing also reduces financial risks for module manufacturers and customers. This work examines the expected impact of certain defects in silicon (Si) modules during standardized accelerated testing. Specifically, the behavior of boron-oxygen (BO) light-induced degradation (LID) and light- and elevated temperature-induced degradation (LeTID) are simulated during some of the stress tests in IEC 61215. LID and LeTID reaction rates at qualification temperatures are estimated from earlier published data. It is demonstrated the BO-related LID may cause some false positives and false negatives when IEC 61215 tests are performed as prescribed in the 2016 published version. Possible stabilization steps to avoid these false results are suggested. State changes for the defects causing LeTID occur much more slowly than those causing BO LID, and therefore LeTID is predicted to have a lesser impact on the IEC 61215 stress tests results.

14 SOLAR ENERGY↗
DOE OSTI2025

Rapid, efficient reduction of iron oxide with ammonia

Reducing iron oxide to iron metal with fossil fuels produces circa 4% of annual anthropogenic CO 2 , ca. 2 Gt/a, as direct chemical emissions from the process. Using ammonia instead of coke—releasing only water and nitrogen as byproducts—could be a widely deployable method of decarbonizing industrial ironmaking, because ammonia carries hydrogen and can be transported easily worldwide. However, initial reports suggest that the reaction of ammonia with iron oxide is slow and inefficient, completed only in hours and using only a few percent of the ammonia supplied. Drawing on thermodynamic and kinetic analysis of the reaction, we explored high-temperature, high-flow reaction conditions designed to increase the reaction rate and the ammonia utilization. We report the reduction of iron oxide in 1 min while using 64% of the ammonia supplied. We show that these insights translate to the gram scale and the reduction of pelletized ore, a common form used industrially.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A percolating path to green iron

About 1.9 gigatons of steel is produced every year, emitting 8% (3.6 gigatons) of global CO 2 in the process. More than 50% of the CO 2 emissions come from a single step of steel production, known as ironmaking. Hydrogen- based direct reduction (HyDR) of iron oxide to iron has emerged as an emission-free ironmaking alternative. However, multiple physical and chemical phenomena ranging from nanometers to meters inside HyDR reactors alter the microstructure and pore networks in iron oxide pellets, in ways that resist gaseous transport of H 2 /H 2 O, slow reaction rates, and disrupt continuous reactor operation. Using synchrotron nano X-ray computed tomography and percolation theory, we quantify the evolution of pores in iron oxide pellets and demonstrate how nanoscale pore connectivity influences micro- and macroscale flow properties such as permeability, diffusivity, and tortuosity. Our modeling framework connects disparate scales and offers opportunities to accelerate HyDR.

hydrogen↗
DOE OSTI2023

The Influence of Nonlocal Metal–Dielectric Environments on Physical and Chemical Processes

Plasmonic nanolayers and laminar metallic/dielectric multilayers were originally developed for optical cloaking applications and lensing applications that could potentially image objects whose size was below the diffraction limit. These assemblies were initially formed from gold or silver nanorods grown within an alumina mesh. However, more recently, assemblies with similar properties have also been prepared by sequential thin-layer deposition of alternating layers of gold and magnesium fluoride (MgF 2 ). These metal/dielectric composite materials enable control of the dielectric constant in the directions perpendicular to the layers and balance the real and imaginary dielectric constants of the assembly such that the speed and the amplitude of the waves traveling through the assembly are not attenuated. In this Account, we will also focus on a few of the applications ranging from surface wetting to fluorescence quenching to enhancement of photochemical reactions. First, we will share an introduction to processes used to create these materials, which are combinations of low refractive index metals and transparent higher index materials arranged in a scalable repeating fashion. Two fabrication methods were employed: an electrochemical deposition of Ag nanorods into an anodized alumina matrix which produced materials with an anisotropic negative refractive index material within the plane of the film and lamellar metal/dielectric layers in which the negative index perpendicular to the growth direction. These alternating layers of plasmonic metals and dielectric materials were ultimately chosen to prepare films for further testing, because of their relative ease of fabrication. We will continue with a discussion of a few of the applications of both of these nonlocal dielectric composite materials including more specialized plasmonic, composite, and hyperbolic metamaterials including fluorescence quenching, photochemical reactions, and surface wetting. In each of these applications, the unique response caused by the enhancement of the electric field and the interface between hyperbolic materials and plasmonic materials as they interact photophysically with their near neighbors is presented. In each of the applications, the enhanced electric field extends from the composite substrate layer to interact with its near neighbors and beyond. Furthermore, the presence of this extended interaction can be observed in the form of decreased emission lifetime, enhancement of photochemical reaction rates, and changes in the surface energies measured by contact angle goniometry. In this Account, all of these situations will be addressed. Finally, we will conclude with a summary and vision for the future as well as a discussion of the unique challenges and opportunities available as research active faculty at an HBCU.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Incorporation and Assembly of a Light-Emitting Enzymatic Reaction into Model Protein Condensates

Eukaryotic cells partition enzymes and other cellular components into distinct subcellular compartments to generate specialized biochemical niches. A subclass of these compartments form in the absence of lipid membranes, via liquid-liquid phase separation of proteins to form biomolecular condensates or “membraneless organelles” such as nucleoli, stress granules, and P-bodies. Because of their ability to form compartments from simple starting materials, membraneless organelles are an attractive target for engineering new functionalities in both living cells and protocells. In this work, we demonstrate incorporation of novel enzymatic activity in protein coacervates with a light-generating enzyme, NanoLuc, to produce bioluminescence. Using condensates comprised of the disordered RGG domain of C. elegans LAF-1, we show functionalization of condensates with enzymatic activity in vitro and that localization to protein coacervates enhances the assembly and activity of split enzymes. To build condensates that function as light emitting reactors, we designed a NanoLuc enzyme flanked by RGG domains. Furthermore, the resulting condensates concentrated NanoLuc by 10-fold over bulk solution and display significantly increased net reaction rates. We further show that condensate viscosity impacts light emission due to diffusion-limited behavior. By splitting NanoLuc enzyme into its constituent components, we demonstrate that NanoLuc activity can be reconstituted via co-condensation. Further, we demonstrate control of the spatial localization of enzyme within condensates by targettng NanoLuc to the surface of in vitro condensates. Collectively, this work demonstrates that membraneless organelles can be endowed with localized enzymatic activity, and that this activity can be spatially and temporally controlled via enzyme reconstitution and design of protein surfactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comment on Improved CO 2 Hydrogenation on Ni–ZnO/MCM-41 Catalysts with Cooperative Ni and ZnO Sites

A recent publication from Murthy et al.1 describes experiments in which they proposed the hypothesis that a bifunctional catalyst consisting of adlineated,2 nanometer-sized domains of Ni and ZnO, confined within the pores of MCM-41, hydrogenates carbon dioxide adsorbed on the ZnO using hydrogen atoms produced by the Ni-catalyzed dissociation of H2. The reanalysis of their data presented below suggests that the reaction rates they employed to test their hypothesis, when properly normalized, show little to no effect of bifunctionality. This closer inspection of their data raises the possibility that the observed effects may instead arise from experimental artifacts (e.g., different levels of conversion, finite rates of mass transport) or morphological correlations that were not considered by the authors.

36 MATERIALS SCIENCE↗