Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Synchrotron X-ray diffraction and Raman spectroscopy of Ln{sub 3}NbO{sub 7} (Ln=La, Pr, Nd, Sm-Lu) ceramics obtained by molten-salt synthesis

Ln{sub 3}NbO{sub 7} (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) ceramics were obtained by molten-salt synthesis and their structures were systematically investigated by synchrotron X-ray diffraction (SXRD), second harmonic generation (SHG) and Raman spectroscopy. It was observed that ceramics with the largest ionic radii (La, Pr, Nd) crystallized into the Pmcn space group, while the ceramics with intermediate ionic radii (Sm-Gd) exhibited a different crystal structure belonging to the Ccmm space group. For this last group of ceramics, this result was corroborated by SHG and Raman scattering and ruled out any possibility for the non-centrosymmetric C 222{sub 1} space group, solving a recent controversy in the literature. Finally, according to SXRD, Tb-Lu containing samples exhibited an average defect fluorite structure (Fm3{sup ¯}m space group). Nonetheless, broad scattering at forbidden Bragg reflections indicates the presence of short-range domains with lower symmetry. Vibrational spectroscopy showed the presence of six Raman-active modes, inconsistent with the average cubic fluorite structure, and in line with the existence of lower-symmetry nano-domains immersed in the average fluorite structure of these ceramics. - Graphical abstract: Raman spectrum for Sm{sub 3}NbO{sub 7} ceramics showing their 27 phonon modes adjusted through Lorentzian lines. According to synchrotron X-ray diffraction and Raman scattering, this material belongs to the space group Cmcm. Display Omitted - Highlights: • Ln{sub 3}NbO{sub 7} ceramics were obtained by molten-salt synthesis. • SXRD, SHG and Raman scattering confirmed orthorhombic and cubic structures. • Ccmm instead of C222{sub 1} is the correct structure for Sm–Gd ceramics. • Pmcn space group was confirmed for La-, Pr- and Nd-based ceramics. • For Tb–Lu ceramics, ordered domains of a pyrochlore structure were observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composition and microstructure of zirconium and hafnium germanates obtained by different chemical routes

The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. The products were characterized using high-temperature X-ray diffraction analysis (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal (TG/DTA) analysis. To investigate the phase composition and stoichiometry of compounds the unit cell parameters were refined by full-profile Rietveld XRD analysis. The morphology of products and its evolution during high-temperature treatment was examined by SEM analysis. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. The ceramic route requires a multi-stage high-temperature treatment to obtain zirconium and hafnium germanates of 95% purity or more. Also, there are strong diffusion limitations to obtain hafnium germanate Hf{sub 3}GeO{sub 8} by ceramic route. On the contrary, the co-precipitation route leads to the formation of nanocrystalline single phase germanates of stoichiometric composition at a relatively low temperatures (less than 1000 °C). The results of quantitative XRD analysis showed the hafnium germanates are stoichiometric compounds in contrast to zirconium germanates that form a set of solid solutions. This distinction may be related to the difference in the ion radii of Zr and Hf. - Graphical abstract: The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. Display Omitted - Highlights: • Zr and Hf germanates were synthesized by ceramic and co-precipitation routes. • The morphology of products depends on the synthesis parameters. • Zirconium germanates forms a set of solid solutions. • Hafnium germanates are stoichiometric compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram refinement, Bi{sub 3}FeSb{sub 2}O{sub 11} structure peculiarities and magnetic properties

The refinement of the Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram has been performed and the existence of the two ternary compounds has been confirmed. The first one with a pyrochlore-type structure (sp. gr. Fd 3-barm) exists in the wide solid solution region, (Bi{sub 2−x}Fe{sub x})Fe{sub 1+y}Sb{sub 1−y}O{sub 7±δ}, where x=0.1–0.4 and y=−0.13–0.11. The second one, Bi{sub 3}FeSb{sub 2}O{sub 11}, corresponds to the cubic KSbO{sub 3}-type structure (sp. gr. Pn 3-bar) with unit cell parameter a=9.51521(2) Å. The Rietveld structure refinement showed that this compound is characterized by disordered structure. The Bi{sub 3}FeSb{sub 2}O{sub 11} factor group analysis has been carried out and a Raman spectrum has been investigated. According to magnetization measurements performed at the temperature range 2–300 K it may be concluded that the Bi{sub 3}FeSb{sub 2}O{sub 11} magnetic properties can be substantially described as a superposition of strong short-range antiferromagnetic exchange interactions realizing inside the [(FeSb{sub 2})O{sub 9}] 3D-framework via different pathways. - Graphical abstract: The refinement of the Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram has been performed and the existence of the solid solution with a pyrochlore-type structure (sp. gr. Fd 3-barm) and Bi{sub 3}FeSb{sub 2}O{sub 11}, correspond of the cubic KSbO{sub 3}-type structure (sp. gr. Pn 3-bar has been confirmed. The structure refinement, Raman spectroscopy as well as magnetic measurements data of Bi{sub 3}FeSb{sub 2}O{sub 11} are presented. - Highlights: • The Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram refinement has been performed. • The Bi{sub 3}FeSb{sub 2}O{sub 11} existence along with pyrochlore structure compound is shown. • It was determined that the Bi{sub 3}FeSb{sub 2}O{sub 11} is of disordered cubic KSbO{sub 3}-type structure. • Factor group analysis of Bi{sub 3}FeSb{sub 2}O{sub 11} vibrational spectrum has been performed. • Short-range antiferromagnetic interactions govern Bi{sub 3}FeSb{sub 2}O{sub 11} magnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating rapid alpha-decay induced aging of 238 PuO 2 by Raman Spectroscopy

Investigating alpha-decay induced aging in PuO 2 is useful in nuclear forensics; helping to determine the time since last calcination. This was previously investigate by monitoring the damage to 240 PuO 2 over the course of a few years. The rate of alpha-decay induced aging has long been assumed to scale only with the decay rate of other isotopes without direct verification. This article reports the first alpha-decay aging study of 238 PuO 2 by Raman spectroscopy. Contrary to the expected 10 days for 238 PuO 2 to reach steady state based on 240 PuO 2 studies, the alpha aging curve reached an approximate steady state ∼24–30 h after laser annealing. While the cause of the order of magnitude decrease is unknown, it is speculated that dynamic annealing could contribute to the differences in rate of induced aging. The Raman spectra of annealed and aged 238 PuO 2 matched the expected features in 239 PuO 2 and 240 PuO 2 spectra; showing no formation of new stable chemical species in the material such as secondary Pu oxide phases (e.g., Pu 4 O 9 ). In conclusion, results indicate that 238 Pu could be leveraged for rapid alpha-decay aging studies to characterize alpha-decay induced features and better understand matrix temperatures and the annealing of Frankel pair defects.

Actinide↗

Radiolysis of thermally dehydrated gibbsite

Aluminum hydroxide (gibbsite, Al (OH) 3 ) powders and their thermally dehydrated forms were rehydrated and irradiated with gamma rays to examine the effects of the collapse of the crystalline gibbsite structure as it is converted to alumina on the transport of precursors of molecular hydrogen to the surface. The amount of hydrogen gas, H 2 , production from irradiated gibbsite and its transition phases with adsorbed water increased substantially with increasing temperature for dehydration of the samples, up to a point. Furthermore, the production of H 2 for samples without water was considerably lower than the hydrated samples signifying the importance of surface water and the transport of precursors to the surface. EPR spectroscopy showed that the major radiolytic products are trapped electrons and related O – centers. Thermal gravimetric analysis (TGA) measurements of gibbsite dehydration established the temperatures of phase transitions from gibbsite to alumina. Changes to the surface and structure of gibbsite and its transition phases following irradiation were analyzed using nitrogen adsorption, powder X-ray diffraction (pXRD), Raman spectroscopy, electron paramagnetic resonance (EPR), and scanning electron microscopy (SEM). pXRD and Raman spectra showed amorphorization at about 300 °C, coupled to a substantial increase in specific surface area due to increasing porosity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Raman spectroscopy and cathodoluminescence characteristics of order-disorder Ba(Zn{sub 1/3}Ta{sub 2/3})O{sub 3} ceramics

The order-disorder transition in Ba(Zn{sub 1/3}Ta{sub 2/3})O{sub 3} (BZT) was characterized by using Raman spectroscopy, transmission electron microscopy (TEM), and cathodoluminescence (CL) microscopy. The 1:2 ordered structure of pure BZT ceramics was replaced by a 1:1 ordered structure at 1650 deg. C and the 1:1 ordered structure of BZT sintered at 1650 deg. C exhibited a 1:2 ordered structure when it was reannealed at 1500 deg. C for 12 h. The A{sub 1g} lines in the Raman spectrum of the sintered and reannealed samples were shifted to lower and higher wavenumbers, respectively. From the CL analysis, the 1:1 ordered BZT exhibited mainly three emission bands at around 533.2 (2.32 eV), 599.1 (2.07 eV), and 682.1 nm (1.81 eV), whereas the 1:2 ordered BZT exhibited mainly five bands at 346.4 (3.58 eV), 427.5 (2.90 eV), 520.9 (2.38 eV), 593.0 (2.09 eV), and 678.9 nm (1.82 eV). The strongest band originating from 2.32 to 2.38 eV was broadened, and the band center shifted towards a higher and lower wavelength in the 1:1 and 1:2 ordered BZT, respectively. Additional bands at around 346 and 427 nm in the grain interior of the annealed sample were strongly related to the 1:2 ordering of BZT.

36 MATERIALS SCIENCE↗

Synthesis, characterization and properties of carbon nanotubes microspheres from pyrolysis of polypropylene and maleated polypropylene

Microspheres assembled from carbon nanotubes (MCNTs), with the diameters ranging from 5.5 to 7.5 {mu}m, were synthesized by means of pyrolysis of polypropylene and maleated polypropylene in an autoclave. The characterization of structure and morphology was carried out by X-ray diffractometer (XRD), field-emission scanning electron microscopy (FESEM), (high resolution) transmission electron microscope [(HR)TEM)], selected-area electron diffraction (SAED) and Raman spectrum. As a typical morphology, the possible growth process of MCNTs was also investigated and discussed. The results of nitrogen adsorption-desorption indicate that the Brunauer-Emett-Teller (BET) surface area (140.6 m{sup 2}/g) of the MCNTs obtained at 600 {sup o}C is about twice as that (74.5 m{sup 2}/g) of carbon nanotubes obtained at 700 {sup o}C. The results of catalytic experiment show that MCNTs based catalyst has higher catalytic activity than the carbon nanotubes based catalyst for the preparation of methanol and dimethoxy-ethane by oxidation of dimethyl ether.

36 MATERIALS SCIENCE↗

Honeycomb-like graphitic ordered macroporous carbon prepared by pyrolysis of ammonium bicarbonate

Graphical abstract: Honeycomb-like graphitic macroporous carbon (HGMC) with big pores centered at 1-3 {mu}m, has been prepared by controlling the reaction temperature and amount of NH{sub 4}HCO{sub 3} at 550 {sup o}C in a sealed reaction system. Possible formation processes of HGMC are discussed on the experimental results. It is believed that the in situ formed MgO microparticles play a template role during the preparation of HGMC. Highlights: {yields} Honeycomb-like graphitic carbon was synthesized at 550 {sup o}C. {yields} The honeycomb-like graphitic carbon is macroposous structures. {yields} The formed MgO microparticles play a template role during the HGMC formation. {yields} The method can be expended to synthesize other porous or hollow carbon material. -- Abstract: Honeycomb-like graphitic macroporous carbon (HGMC) was synthesized by means of pyrolysis of NH{sub 4}HCO{sub 3} using Mg powder as reductant in an autoclave at 550 {sup o}C. The characterization of structure and morphology was carried out by X-ray diffraction (XRD), Raman spectrum, field-emission scanning electron microscopy (FESEM), and (High-resolution) transmission electron microscope [(HR)TEM]. The results of nitrogen adsorption-desorption indicate that the products are macropore materials with the pore size of 1-3 {mu}m, and the Brunauer-Emett-Teller (BET) surface area was 14 m{sup 2}/g. As a typical morphology, the possible growth process of HGMC was also investigated and discussed. The experimental results show that the in situ formed MgO microparticles play a template role during the HGMC formation.

36 MATERIALS SCIENCE↗

Electronic structure and vibrational properties of KRbAl{sub 2}B{sub 2}O{sub 7}

Graphical abstract: With the KRbAl{sub 2}B{sub 2}O{sub 7} powder formed by solid state synthesis (left), Raman spectrum (right upper) and XPS valence electronic states (right lower) were measured, agreed with the first-principles results. Highlights: ► KRbAl{sub 2}B{sub 2}O{sub 7} powder was obtained by solid state synthesis. ► Vibrational properties of KRbAl{sub 2}B{sub 2}O{sub 7} were determined by unpolarized Raman spectrum. ► Electronic structures of KRbAl{sub 2}B{sub 2}O{sub 7} were measured by XPS. ► Experimental electronic structure is consistent with the first-principles result. ► KRbAl{sub 2}B{sub 2}O{sub 7} has a noticeable refractive indices increase and small NLO effects decrease compared to K{sub 2}Al{sub 2}B{sub 2}O{sub 7}. - Abstract: The physical properties of KRbAl{sub 2}B{sub 2}O{sub 7} have been considered in comparison with those of K{sub 2}Al{sub 2}B{sub 2}O{sub 7} and Rb{sub 2}Al{sub 2}B{sub 2}O{sub 7}. The vibrational parameters of KRbAl{sub 2}B{sub 2}O{sub 7} have been measured by Raman spectroscopy as very similar to those of K{sub 2}Al{sub 2}B{sub 2}O{sub 7}. The electronic structures of KRbAl{sub 2}B{sub 2}O{sub 7} have been evaluated by X-ray photoelectron spectroscopy and ab initio computations using CASTEP package. A noticeable refractive indices increase and small decrease of nonlinear optical properties have been found in KRbAl{sub 2}B{sub 2}O{sub 7} in reference to optical parameters of K{sub 2}Al{sub 2}B{sub 2}O{sub 7}.

36 MATERIALS SCIENCE↗

The AMWCNTs supported porous nanocarbon composites for high-performance supercapacitor

Graphical abstract: The AMWCNTs supported porous nanocarbon composites were prepared by a easy method. The composites had shown good performances for electrochemical energy storage with high specific capacitance and good stability. - Highlights: • The AMWCNTs supported porous nanocarbon composites were prepared. • The composites have good conductivity and large BET specific surface areas. • The composites had shown high specific capacitance, and good stability. - Abstract: The porous nanocarbons supported by acid-treated multiwall carbon nanotubes (PC@ACNTs) were prepared by the combination of the hydrothermal polymerization of glucose on ACNTs, carbonization under N{sub 2} protection and final activation with ZnCl{sub 2}. The materials were characterized by transmission electron microscopy, X-ray powder diffraction and Raman spectra. The results indicated that the ACNTs distributed uniformly into the framework of the porous carbon. The composites showed the high BET specific surface area up to 1712 m{sup 2} g{sup −1} and good conductivity. The electrochemical measurements indicated that the composites processed good performances for electrochemical energy storage (210 F g{sup −1} at 0.5 A g{sup −1}), and high stability (>99.9%), much higher than the corresponding ACNTs, porous carbons and the samples prepared by using raw MWCNTs as source. The good performance of PC@ACNTs composites was relative with the synergy of good conductivity of ACNTs and large specific surface areas of PC.

36 MATERIALS SCIENCE↗

Phase transitions, dielectric properties, and vibrational study of stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ}

Graphical abstract: The diffuseness of the phase transition of the Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} enhances with the increasing of erbium content. These compounds were found to undergo phase transitions with increasing temperature. - Highlights: • Substitution Sr/Er in the alkaline earth cage modifies the thermally induced disorder. • Two phase transitions have been observed by DSC. • The dielectric constant increases with erbium substitution. • Dielectric loss increases exponentially with temperature. • The conductivity contribution is mainly due to hopping process. - Abstract: A polycrystalline stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} (x = 0.00, 0.01 and 0.03) were synthesized by sol–gel method and their vibrational properties were investigated using Raman scattering. The substitution of Er in the Sr site, results in a slight change of the position of the Raman spectrum bands. The differential scanning calorimetry (DSC) shows two phase transitions at 532 K and 634 K for Sr{sub 0.99}Er{sub 0.01}SnO{sub 3−δ}. The dielectric behavior of each solid solution (x = 0.01 and x = 0.03) has been studied as a function of temperature and frequency and has confirmed the observed phase transitions. The diffuseness of the phase transitions of these materials enhances with the increasing of erbium content. The dielectric constant showed a strong increase near the phase transitions temperature which value depends with frequency. This phenomenon is usually observed in relaxor materials. The conduction and the dielectric relaxation are attributed to hopping of electrons among Sn{sup 2+} and Sn{sup 4+} ions.

36 MATERIALS SCIENCE↗

Microstructural, optical and ethanol sensing properties of sprayed Li-doped Mn{sub 3}O{sub 4} thin films

Highlights: • Li doped Mn{sub 3}O{sub 4} was grown on glass substrate via the low cost effective spray pyrolysis technique. • Li doping notably tuned the optical band gap of Mn{sub 3}O{sub 4} thin film. • The incorporation of Li ions was found to provide an enhancement of ethanol sensitivity. - Abstract: Lithium-doped manganese oxide thin films have been deposited onto glass substrate by the spray pyrolysis technique. The effect on structural, morphological, optical and ethanol sensitivity properties of the films with different Li concentrations was investigated. The X-ray diffraction (XRD) studies of Li doped Mn{sub 3}O{sub 4} thin films revealed polycrystalline tetragonal structure with lattice parameters: a = 5.73 Å and c = 9.46 Å. The most intense band at 653.26 cm{sup −1} observed in room temperature Raman spectrum of all films corresponds to the tetragonal crystal structure of Mn{sub 3}O{sub 4}. Optical band gap energy was found to vary in the range of 2.23–2.82 eV by an increase in Li-doping concentration up to 15%. The resistance based gas sensing measurements showed a clear response already at a low ethanol concentration of 0.1%. The films showed promising ethanol sensing behavior; especially the sample doped with 3% of lithium exhibits the most excellent sensing performance.

36 MATERIALS SCIENCE↗

Enhanced red emission induced by Tb{sup 3+} doping in europium-based molybdate phosphors

Graphical abstract: The introduction of Tb3+ significantly enhances the red emission of Eu3+ in europium-based molybdate phosphors. The enhanced red emission intensity is discussed by the relaxation of parity-forbidden selection rules of Eu3+ ions, whereas the contribution of Tb3+ → Eu3+ energy transfer is little in our case. - Highlights: • The introduction of Tb{sup 3+} significantly enhances the red emission of Eu{sup 3+} in europium-based molybdate phosphors. • At x = 0.02, the red-emitting intensity of LiEuMo{sub 2}O{sub 8} is enhanced by 30% under excitation at ultraviolet light 395 nm. • The enhanced red emission intensity is discussed by the relaxation of parity-forbidden selection rules of Eu{sup 3+} ions, whereas the contribution of Tb{sup 3+} → Eu{sup 3+} energy transfer is little in our case. - Abstract: A series of Tb{sup 3+}-doped europium-based molybdate red-emitting phosphors (LiEuMo{sub 2}O{sub 8}) were prepared by solid-state reaction method, their crystal structure and luminescence properties have been investigated by X-ray diffraction, micro-Raman spectra, diffuse reflectance spectra, photoluminescence and photoluminescence excitation spectra. Partial substitution of Li{sup +} by Tb{sup 3+} slightly distorts the host lattice, red-shifts the absorption edge of host and improves Eu{sup 3+} red-emitting intensity in LiEuMo{sub 2}O{sub 8} compound. The red-emitting intensity of LiEuMo{sub 2}O{sub 8} powder is enhanced by 30% at the doping level of 0.02 under excitation at 395 nm. In present study, we found that the contribution of Tb{sup 3+} → Eu{sup 3+} energy transfer to the enhanced Eu{sup 3+} emission is little since the Tb{sup 3+} ions are not responsive to the near ultraviolet (∼395 nm), the enhanced red emission is tentatively ascribed to the relaxation of parity-forbidden selection rules of Eu{sup 3+} ions. White light-emitting diodes are fabricated by using near ultraviolet light-emitting diode chips (∼395 nm) and the blends of the commercial blue, green and as-prepared red Li{sub 0.98}Tb{sub 0.02}EuMo{sub 2}O{sub 8} phosphor, the resulting white light-emitting diode shows a color-rendering index of 93.5, luminous efficacy of 14 lm/W and chromaticity coordinates of (0.292, 0.329).

36 MATERIALS SCIENCE↗

Electrical properties and conduction mechanism study by OLPT model of NaZnPO4 compound

Highlights: • The crystal structure was resolved using Fullproof program. • The conduction in NaZn PO{sub 4} is insured by OLPT model. • Ac conductivity of NaZn PO{sub 4} compound obeys the Joncher’s law. - Abstract: A polycrystalline sample with NaZnPO{sub 4} stoichiometry was synthesized by the conventional solid-state reaction and then identified and characterized by X-ray powder diffraction, Raman spectroscopy and impedance spectroscopy. The X-ray diffraction pattern revealed that the composite represents a single phase that crystallizes in the monoclinic system with a P2{sub 1}/n space group. All vibration modes of tetrahedral PO{sub 4} appeared in the Raman spectrum. Besides, the electrical conductivity behavior of the title compound was analysed as a function of frequency ranging from 209 Hz to 1 MHz and at a temperature interval ranging from 578 K to 728 K by means of impedance spectroscopy to elucidate the conduction mechanism in this compound. The temperature dependence of frequency exponent ′s′ showed that the conduction in NaZnPO{sub 4} is insured by the overlapping large polaron tunneling (OLPT) model. A correlation between electrical and structural properties was also depicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transition in two-dimensional monolayer (1L)-molybdenum disulfide induced by atomic S-basal plane gliding via synchrotron X-ray monochromatic beam radiation for superior electronic performance

Here, in this work, we report a novel approach to reduce the channel resistance by inducing a phase transition behavior from 2H to 1T in a monolayer MoS 2 (1L-MoS 2 ) by a synchrotron X-ray monochromatic beam (mono-beam) radiation. The effects of the biphase structure by the mono-beam on the 1L-MoS2 film were investigated using Raman spectra, photoluminescence (PL) spectra, scanning tunneling microscopy, and scanning tunneling spectroscopy, respectively. Through material characterization, we identified that the lateral sliding of S-vacancies along the S-plane in the 1L-MoS 2 is the key reason for the origin of unidirectional phase transition. The precise phase engineering triggered by the mono-beam radiation process allows the realization of field-effect transistors (FET) with 2X improvement in mobility toward a high on/off ratio (~10 8 ) and a near-ideal subthreshold swing of ~88 mV per decade. The validity of the phase engineering could be further extended for its application as a memory device, exhibiting a gate tunable conduction modulation behavior and a high resistance ratio of ~10 2 at a gate bias of 5 V with endurance of ~100 cycles. Furthermore, an artificial neural network using the synaptic weight update with accuracy of ~93 % was achieved.

36 MATERIALS SCIENCE↗

Shear induced weakening of the hydrogen bonding lattice of the energetic material 5,5'-Hydrazinebistetrazole at high-pressure

5,5'-Hydrazinebistetrazole (HBTA) has been studied by in-situ x-ray diffraction and vibrational spectroscopy to pressures near 25 GPa at room temperature. Analysis of the x-ray diffraction pattern of HBTA collected at ambient pressure and temperature revealed a monoclinic structure consistent with that previously reported. Under compression, the x-ray diffraction reveals little evidence of a phase transition over the pressure range studied. Slight anisotropy in response to compression was noted and the β angle decreased moderately, suggesting geometry modifications occur in the hydrogen bonding lattice and between neighboring HBTA molecules as a result of compression along the c axis. Blue shifts in the Infrared active N-H stretching modes were observed, implying a weakening of the hydrogen bond with compression. The weakening of the hydrogen bonding lattice with pressure may lead to an increase in the bending angle of the C-N=N-C bridge between the tetrazole rings and an increased overlap between the π-bonding orbitals. The Raman spectra showed a number of modes associated with H-N=N-H motions of the bridge become more prominent in the spectra under compression. Additionally, the possibility that the increased bend in the angle of the C-N=N-C bridge results from a shearing deformation is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High rate and long cycle life in Li-O 2 batteries with highly efficient catalytic cathode configured with Co 3 O 4 nanoflower

The reaction mechanism of non-aqueous Li-O 2 batteries is based on the deposition and decomposition of Li 2 O 2 . The polarization of Li-O 2 batteries can be rapidly increased by operation under a high rate condition, resulting in the early capacity fade of the cells. Therefore, a well-designed catalyst with a unique structure and excellent catalytic ability is an important way to boost the round-trip performance of Li-O 2 batteries, especially under high current density. In this work, a unique nanoflower structure assembled with Co 3 O 4 nanosheets is synthesized by using 2-methylimidazole (2-MIM) as a structural directing agent. X-ray photoelectron spectroscopy (XPS) and Raman spectra reveal abundant oxygen vacancies on the surface of the Co 3 O 4 nanoflower, which are beneficial for oxygen reduction and evolution reactions and long round-trip lifetime. Density functional theory results demonstrate that Co 3 O 4 catalyst with oxygen vacancies could promote the wetting of Li 2 O 2 on substrate and formation of a Li 2 O 2 nanofilm, thereby boosting the discharge capacity of Li-O 2 batteries. On account of the synergistic effect of abundant oxygen vacancies, the unique structure, and excellent oxygen evolution reaction, Co 3 O 4 nanoflower-based cells could deliver ultralong lifetime of 276 and 248 cycles with a discharge capacity of 1000 mAh g(-1) under charge/discharge current densities of 0.5 A g -1 and 1 A g -1 , respectively. Finally, this study has shed light on a new strategy for catalyst preparation for long lifetime Li-O 2 batteries.

25 ENERGY STORAGE↗

Enhanced electrical properties of pulsed laser-deposited CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films via processing control

Polycrystalline CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films were prepared on soda-lime glass substrates using pulsed laser deposition (PLD) with various process parameters such as laser energy, repetition rate and substrate temperature. It was confirmed that there existed a limited laser energy, i.e. less than 300 mJ, to get phase pure CIGS thin films at room temperature. Particularly, even at room temperature, distinct crystalline CIGS phase was observed in the films. Crystallinity of the films improved with increasing substrate temperature as evidenced by the decrease of FWHM from 0.65 degto 0.54 deg. Slightly Cu-rich surface with Cu{sub 2-x}Se phase was confirmed to exist by Raman spectra, depending on substrate temperature. Improved electrical properties, i.e., carrier concentration of {proportional_to}10{sup 18} cm{sup -3} and resistivity of 10{sup -1}{omega} cm at higher substrate temperature for the optimal CIGS films are assumed to be induced by the potential contributions from highly crystallized thin films, existence of Cu{sub 2-x}Se phase and diffusion of Na from substrates to films. (author)

14 SOLAR ENERGY↗