SEARCH · Engineering Papers

Results for “QUENCHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Rapid solidification of metallic particulates

In order to maximize the heat transfer coefficient the most important variable in rapid solidification is the powder particle size. The finer the particle size, the higher the solidification rate. Efforts to decrease the particle size diameter offer the greatest payoff in attained quench rate. The velocity of the liquid droplet in the atmosphere is the second most important variable. Unfortunately the choices of gas atmospheres are sharply limited both because of conductivity and cost. Nitrogen and argon stand out as the preferred gases, nitrogen where reactions are unimportant and argon where reaction with nitrogen may be important. In gas atomization, helium offers up to an order of magnitude increase in solidification rate over argon and nitrogen. By contrast, atomization in vacuum drops the quench rate several orders of magnitude.

Grant, N. J.↗

NASA NTRS1983

Acoustical-Levitation Chamber for Metallurgy

Sample moved to different positions for heating and quenching. Acoustical levitation chamber selectively excited in fundamental and second-harmonic longitudinal modes to hold sample at one of three stable postions: A, B, or C. Levitated object quickly moved from one of these positions to another by changing modes. Object rapidly quenched at A or C after heating in furnace region at B.

Barmatz, M. B.↗

NASA NTRS1982

Rapid solidification of metallic particulates

Grant, N. J.↗

NASA NTRS1982

Solidification studies of Nb-Ge alloys at large degrees of supercooling

A 32 meter evacuated drop tube has been used to investigate the solidification of Nb-Ge alloys after deep undercooling. Samples have been supercooled as much as 500 K below the liquidus by using free-fall conditions to eliminate crucible induced nucleation. Final microstructures are dependent on the quenching rates at the bottom of the drop tube with a striking extension of the beta phase solubility limit at the higher quenching rates.

Lacy, L. L.↗

NASA NTRS1984

Nickel-iron battery system safety

The generated flow rates of gaseous hydrogen and gaseous oxygen from an electrical vehicle nickel-iron battery system were determined and used to evaluate the flame quenching capabilities of several candidate devices to prevent flame propagation within batteries having central watering/venting systems. The battery generated hydrogen and oxygen gases were measured for a complete charge and discharge cycle. The data correlates well with accepted theory during strong overcharge conditions indicating that the measurements are valid for other portions of the cycle. Tests confirm that the gas mixture in the cells is always flammable regardless of the battery status. The literature indicated that a conventional flame arrestor would not be effective over the broad spectrum of gassing conditions presented by a nickel-iron battery. Four different types of protective devices were evaluated. A foam-metal arrestor design was successful in quenching gaseous hydrogen and gaseous oxygen flames, however; the application of this flame arrestor to individual cell or module protection in a battery is problematic. A possible rearrangement of the watering/venting system to accept the partial protection of simple one-way valves is presented which, in combination with the successful foam-metal arrestor as main vent protection, could result in a significant improvement in battery protection.

Saltat, R. C.↗

NASA NTRS1984

Quantitative photoexcitation and fluorescence studies of C2H2 in vacuum ultraviolet

Synchrotron radiation light source measurements were conducted in the 105-155 nm region to obtain the photoabsorption and fluorescence cross sections of C2H2, and the quantum yield for producing the C2H-asterisk fluorescence from C2H2's photodissociation was measured in the 106-136.5 nm region. The products of the radiative lifetime quenching rate constant increase with excitation wavelengths. The data obtained on lifetimes, quenchings, and fluorescence spectra point to an upper state of the C2H-asterisk fluorescence that is well bound, while the lower state is a repulsive or weak-bound state.

Suto, M.↗

NASA NTRS1984

No sulfur flows on Io

Physical and chemical properties of elemental sulfur are incompatible with the suggestion that the colored flows associated with volcanoes on Io are quenched unstable allotropes of sulfur. Either the volcanic flows are not sulfur, or some mechanism other than quenching is required to produce colored forms of sulfur in them. The properties of sulfur are unsuited to the production and survival of colored unstable allotropes on Io. The color of this object is probably due to some other material, possibly iron compounds.

Young, A. T.↗

NASA NTRS1983

Description of the containerless melting of glass in low gravity

A brief description is given of a single-axis, acoustic levitator/furnace apparatus used to position, heat, melt, and quench multicomponent oxide, glass-forming compositions in low gravity. This apparatus is capable of processing eight approximately spherical samples (about 6 mm diameter) at temperatures up to 1550 C in a dry air atmosphere. Results are also presented for a containerless melting experiment conducted on SPAR VI where a ternary CaO-Ga2O3-SiO2 composition was levitated and quenched to a glass. Selected properties of the glass prepared on SPAR VI are compared with the properties of glass samples of identical composition prepared on earth.

Ray, C. S.↗

NASA NTRS1984

Corrosion behavior of magnetron sputter-deposited (Mo/0.6/Ru/0.4/)82B18 and Mo82B18 amorphous metal films

Amorphous metallic films of Mo49Ru33B18 and Mo82B18 have been prepared by magnetron sputtering, and their corrosion behavior was investigated and compared with amorphous liquid-quenched Mo49Ru33B18 and crystalline Mo i acidic and basic solutions. Sputtered Mo49Ru33B18 showed lower corrosion rates compared with liquid-quenched Mo49Ru33B18, owing to the superior surface smoothness and uniformity of the former. Amorphous Mo82B18 showed low corrosion rates in both acidic and basic aqueous solutions. Comparison of the corrosion properties of Mo49Ru33B18 with Mo82B18 and Mo demonstrates the roles of the alloys' constituents. Ru significantly extends the passive region to high-anodic potentials, but, at less-anodic potentials, Mo82B18 has the lowest corrosion rate.

Williams, R. M.↗

NASA NTRS1984

Glass on the surfaces of Io and Amalthea

The results of laboratory tests of the spectral reflectances of sulfur and sulfur-silicate glasses are compared with Voyager UV and IR spectral data of Io and Amalthea. Sulfur glasses, without the S8 allotrope, are formed when molten sulfur is quickly quenched to temperatures below 150 K. The trials involved heating sulfur to temperatures from 430-700 K, then quenching and recording the color that resulted. It was observed that the insulating properties of sulfur are so high that the glasses would probably only form in volcanic plumes, yielding particles in the 10-100 micron diameter range. Fumarole droplets could impact cold ground and leave 1 mm glass particles. Basalt-sulfur specimens heated to 1400 K to melt the basalt, then cooled, produced glasses of a color which matches the color of darker areas detected on Io. The surface colors of Amalthea, although definitely contaminated with particles from Io mass loss, exhibited only a few color matches with the basalt-sulfur glasses. More refined spectra of Amalthea are required if the surface constituents are to be identified.

Gradie, J.↗

NASA NTRS1985

Rapid Solidification of Magnetic Oxides

The enhanced control over microstructural evolution inherent in rapid solidification processing techniques are exploited to create novel ceramic magnetic materials. The great sensitivity of magnetic properties to local structure provides a powerful probe both for the study of structure and of microscopic solidification mechanisms. The first system studied is the SrO-Fe2O3 binary, which contains the commercially important hard magnetic compound strontium hexaferrite. The products were analyzed by transmission electron microscopy, Mossbauer spectroscopy, magnetic measurements, and differential thermal analysis. As-quenched ribbons contain high concentrations of super-paramagnetic particles, 80 to 250 Angstroms in diameter, in a glassy matrix. This suggests the possibility of crystallizing monodomain strontium hexaferrite during subsequent heat treatment, with a resulting increase in coercivity over conventionally processed ferrite magnets. That magnetic properties can be controlled in solidification processing by varying the quench rate is demonstrated.

Kalonji, G.↗

NASA NTRS1986

Combustion theory for liquids with a free surface. 3: Special problems

Two special problems concerning the combustion of liquids with a free surface, i.e., flame quenching during the mixing of a burning liquid inside a container and liquid burnout from a porous layer, are analyzed using a quasi-one-dimensional model. The critical parameters corresponding to the quenching of a burning fluid with a free surface are determined. Determinations are also made of the limiting pressure gradients corresponding to the transition from the combustion mode where the liquid evaporates from the surface of a porous layer to the mode where the phase transition surface lies inside the porous layer.

Milkov, S. N.↗

NASA NTRS1985

Use of induced fluorescence measurements to assess aluminum-organic interactions in acidified lakes

The application of laser fluorosensing to the tracing of metals in acid lakes is proposed. The effects of the metals on the dissolving organic carbon (DOC) fluorescence is studied using laboratory mixed water samples and natural water samples from Hamilton and Big Moose Lakes in New York. The operation of the laser fluorosensing system employed in the experiment is described. The DOC fluorescence was quenched by Al, Cu, and Fe, and the relation between pH and the quenching rate is examined. The humic substances fluorescence spectra are analyzed to estimate the concentrations of DOC in water and the relative concentration of Al. The interference problems caused by chemical competition between metal ions and ligands, and changes in the background DOC fluorescence are discussed. It is noted that an airborne laser fluorescence is useful for detecting elevated concentrations of metals.

Vodacek, A.↗

NASA NTRS1986

Solidification of Nb-Ge alloys in long drop tubes

The 30-m and 100 m-long drop tubes at the Marshall Space Flight Center have been used to obtain large undercooling in Nb-Ge alloys. Electron beam melting has been used to obtain drops approximately 2.5 mm in diam. In the 30-m tube, many specimens fell the length of the tube without solidifying, and were ultimately liquid-quenched in oil. The amount of undercooling prior to the quench was usually around 0.13 T(m). In the 100-m tube, freezing generally initiated during free fall, and the maximum undercooling was around 0.22 T(m). Microstructures were characterized by a combination of X-ray diffraction, optical microscopy, and scanning electron microscopy with energy dispersive analysis by X-rays. A variety of interesting microstructures was observed.

Bayuzick, R. J.↗

NASA NTRS1987

Mechanical properties and morphology of poly(etheretherKetone)

Mechanical properties and morphology of poly(etheretherketone) (PEEK) were studied for samples having different thermal histories. Isothermal and rate-dependent crystallization were studied to ascertain the relationship between crystallinity/morphology and processing condition. Degree of crystallinity and microstructure were controlled by cooling the melt at different rates, ranging from quenching to slowly cooling, and by annealing amorphous material above the glass transition temperature Tg. It is found that degree of crystallinity was not as important as processing history in determining the room temperature mechanical properties. Samples with the same degree of crystallinity had very different tensile properties, depending on rate of cooling from the melt. All samples yielded by shear band formation and necked down. Quenched films had the largest breaking strains, drawing to 270 percent. Slowly cooled films exhibited ductile failure at relatively low strains. Best combined mechanical properties were obtained from semicrystalline films cooled at intermediate rates from the melt.

Cebe, Peggy↗

NASA NTRS1987

Cellular microstructure of chill block melt spun Ni-Mo alloys

Chill block melt spun ribbons of Ni-Mo binary alloys containing 8.0 to 41.8 wt pct Mo have been prepared under carefully controlled processing conditions. The growth velocity has been determined as a function of distance from the quench surface from the observed ribbon thickness dependence on the melt puddle residence time. Primary arm spacings measured at the midribbon thickness locations show a dependence on growth velocity and alloy composition which is expected from dendritic growth models for binary alloys directionally solidified in a positive temperature gradient. Microsegregation across cells and its variation with distance from the quench surface and alloy composition have been examined and compared with theoretical predictions.

Tewari, S. N.↗

NASA NTRS1987

Comparison of the structure of harmonic aqueous glasses and liquid water

Glassy structures of water were generated by rapidly quenching configurations of 64 and 343 molecules of liquid water; and the potential energy was then expanded through quadratic order around local minima generated in this way, and the properties of the resulting harmonic system were calculated. The results obtained were used to test the degree to which the structure of liquid water is similar to that of a harmonic aqueous glass. The radial distribution functions for the glass were found to be remarkably similar to those of the liquid. Translational modes were found to be almost entirely responsible for the broadening of the oxygen-oxygen radial distribution function of the quenched configuration, and also primarily responsible for the broadening of other radial distribution functions.

Pohorille, Andrew↗

NASA NTRS1987

Phase equilibria in the iron oxide-cobalt oxide-phosphorus oxide system

Two novel ternary compounds are noted in the present study of 1000 C solid-state equilibria in the Fe-Co-P-O system's Fe2O3-FePO4-Co3(Po4)2-CoO region: CoFe(PO4)O, which undergoes incongruent melting at 1130 C, and Co3Fe4(PO4)6, whose incongruent melting occurs at 1080 C. The liquidus behavior-related consequences of rapidly solidified cobalt ferrite formation from cobalt ferrite-phosphate melts are discussed with a view to spinel formation. It is suggested that quenching from within the spinel-plus-liquid region may furnish an alternative to quenching a homogeneous melt.

De Guire, Mark R.↗