Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Programming Plasma Physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Development of new platforms for hydrodynamic instability and asymmetry measurements in deceleration phase of indirectly driven implosions on NIF

Hydrodynamic instabilities and asymmetries are a major obstacle in the quest to achieve ignition at the National Ignition Facility (NIF) as they cause pre-existing capsule perturbations to grow and ultimately quench the fusion burn in experiments. This paper reviews the development of two new experimental techniques to measure high-mode instabilities and low-mode asymmetries in the deceleration phase of indirect drive inertial confinement fusion implosions. In the first innovative technique, self-emission from the hot spot was enhanced with an argon dopant to “self-backlight” the shell in-flight, imaging the perturbations in the shell near peak velocity. Experiments with pre-imposed two-dimensional perturbations showed hydrodynamic instability growth of up to 7000× in areal density. These experiments discovered unexpected three-dimensional structures originating from the capsule support structures. These new 3-D structures became one of the primary concerns for the indirect drive ICF program that requires their origin to be understood and their impact mitigated. In a second complementary technique, the inner surface of the decelerating shell was visualized in implosions using x-ray emission of a high-Z dopant added to the inner surface of the capsule. With this technique, low mode asymmetry and high mode perturbations, including perturbations seeded by the gas fill tube and capsule support structure, were quantified near peak compression. Using this doping method, the role of perturbations and radiative losses from high atomic number materials on neutron yield was quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis of Supported Pd 0 Nanoparticles from a Single-Site Pd 2+ Surface Complex by Alkene Reduction

Here, a surface metal–organic complex, (-AlO x )Pd(acac) (acac = acetylacetonate), is prepared by chemically grafting the precursor Pd(acac) 2 onto γ-Al 2 O 3 in toluene at 25 °C. The resulting surface complex is characterized by inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and dynamic nuclear polarization surface-enhanced solid-state nuclear magnetic resonance spectroscopy (DNP SENS). This surface complex is a precursor in the direct synthesis of size-controlled Pd nanoparticles under mild reductive conditions and in the absence of additional stabilizers or pretreatments. Indeed, upon exposure to gaseous ethylene or liquid 1-octene at 25 °C, the Pd 2+ species is reduced to form Pd 0 nanoparticles with a mean diameter of 4.3 ± 0.6 nm, as determined by scanning transmission electron microscopy (STEM). These nanoparticles are catalytically relevant using the aerobic 1-phenylethanol oxidation as a probe reaction, with rates comparable to a conventional Pd/Al 2 O 3 catalyst but without an induction period. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature-programmed reaction mass spectrometry (TPR-MS) reveal that the surface complex reduction with ethylene coproduces H 2 , acetylene, and 1,3-butadiene. This process reasonably proceeds via an olefin activation/coordination/insertion pathway, followed by β-hydride elimination to generate free Pd 0 . Lastly, the well-defined nature of the single-site supported Pd 2+ precursor provides direct mechanistic insights into this unusual and likely general reductive process.

36 MATERIALS SCIENCE↗

Pressure probe study of the water relations of Phycomyces blakesleeanus sporangiophores

The physical characteristics which govern the water relations of the giant-celled sporangiophore of Phycomyces blakesleeanus were measured with the pressure probe technique and with nanoliter osmometry. These properties are important because they govern water uptake associated with cell growth and because they may influence expansion of the sporangiophore wall. Turgor pressure ranged from 1.1 to 6.6 bars (mean = 4.1 bars), and was the same for stage I and stage IV sporangiophores. Sporangiophore osmotic pressure averaged 11.5 bars. From the difference between cell osmotic pressure and turgor pressure, the average water potential of the sporangiophore was calculated to be about -7.4 bars. When sporangiophores were submerged under water, turgor remained nearly constant. We propose that the low cell turgor pressure is due to solutes in the cell wall solution, i.e., between the cuticle and the plasma membrane. Membrane hydraulic conductivity averaged 4.6 x 10(-6) cm s-1 bar-1, and was significantly greater in stage I sporangiophores than in stage IV sporangiophores. Contrary to previous reports, the sporangiophore is separated from the supporting mycelium by septa which prevent bulk volume flow between the two regions. The presence of a wall compartment between the cuticle and the plasma membrane results in anomalous osmosis during pressure clamp measurements. This behavior arises because of changes in solute concentration as water moves into or out of the wall compartment surrounding the sporangiophore. Theoretical analysis shows how the equations governing transient water flow are altered by the characteristics of the cell wall compartment.

NASA Discipline Number 40-30↗

IEC Thrusters for Space Probe Applications and Propulsion

Earlier conceptual design studies (Bussard, 1990; Miley et al., 1998; Burton et al., 2003) have described Inertial Electrostatic Confinement (IEC) fusion propulsion to provide a high-power density fusion propulsion system capable of aggressive deep space missions. However, this requires large multi-GW thrusters and a long term development program. As a first step towards this goal, a progression of near-term IEC thrusters, stating with a 1-10 kWe electrically-driven IEC jet thruster for satellites are considered here. The initial electrically-powered unit uses a novel multi-jet plasma thruster based on spherical IEC technology with electrical input power from a solar panel. In this spherical configuration, Xe ions are generated and accelerated towards the center of double concentric spherical grids. An electrostatic potential well structure is created in the central region, providing ion trapping. Several enlarged grid opening extract intense quasi-neutral plasma jets. A variable specific impulse in the range of 1000-4000 seconds is achieved by adjusting the grid potential. This design provides high maneuverability for satellite and small space probe operations. The multiple jets, combined with gimbaled auxiliary equipment, provide precision changes in thrust direction. The IEC electrical efficiency can match or exceed efficiencies of conventional Hall Current Thrusters (HCTs) while offering advantages such as reduced grid erosion (long life time), reduced propellant leakage losses (reduced fuel storage), and a very high power-to-weight ratio. The unit is ideally suited for probing missions. The primary propulsive jet enables delicate maneuvering close to an object. Then simply opening a second jet offset 180 degrees from the propulsion one provides a 'plasma analytic probe' for interrogation of the object.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The NASA-JPL advanced propulsion program

The NASA Advanced Propulsion Concepts (APC) program at the Jet Propulsion Laboratory (JPL) consists of two main areas: The first involves cooperative modeling and research activities between JPL and various universities and industry; the second involves research at universities and industry that is directly supported by JPL. The cooperative research program consists of mission studies, research and development of ion engine technology using C-60 (Buckminsterfullerene) propellant, and research and development of lithium-propellant Lorentz-force accelerator (LFA) engine technology. The university/industry- supported research includes research (modeling and proof-of-concept experiments) in advanced, long-life electric propulsion, and in fusion propulsion. These propulsion concepts were selected primarily to cover a range of applications from near-term to far-term missions. For example, the long-lived pulsed-xenon thruster research that JPL is supporting at Princeton University addresses the near-term need for efficient, long-life attitude control and station-keeping propulsion for Earth-orbiting spacecraft. The C-60-propellant ion engine has the potential for good efficiency in a relatively low specific impulse (Isp) range (10,000 - 30,000 m/s) that is optimum for relatively fast (less than 100 day) cis-lunar (LEO/GEO/Lunar) missions employing near-term, high-specific mass electric propulsion vehicles. Research and modeling on the C-60-ion engine are currently being performed by JPL (engine demonstration), Caltech (C-60 properties), MIT (plume modeling), and USC (diagnostics). The Li-propellant LFA engine also has good efficiency in the modest Isp range (40,000 - 50,000 m/s) that is optimum for near-to-mid-term megawatt-class solar- and nuclear-electric propulsion vehicles used for Mars missions transporting cargo (in support of a piloted mission). Research and modeling on the Li-LFA engine are currently being performed by JPL (cathode development), Moscow Aviation Institute (engine testing), Thermacore (electrode development), as well as at MIT (plume modeling), and USC (diagnostics). Also, the mission performance of a nuclear-electric propulsion (NEP) Li-LFA Mars cargo vehicle is being modeled by JPL (mission analysis; thruster and power processor modeling) and the Rocketdyne Energy Technology and Engineering Center (ETEC) (power system modeling). Finally, the fusion propulsion research activities that JPL is supporting at Pennsylvania State University (PSU) and at Lawrenceville Plasma Physics (LPP) are aimed at far-term fast (less than 100 day round trip) piloted Mars missions and, in the very far term, interstellar missions.

Frisbee, Robert H.↗

Energy Exchange Dynamics across L-H Transitions in NSTX

We studied the energy exchange dynamics across the low-to-high-confinement (L-H) in NSTX discharges using the gas-puff imaging (GPI) diagnotic. The investigation focused on the energy exchange between flows and turbulence, to help clarify the mechanism of the L-H transition. We apply this study to three type of heating schemes, including a total of 17 shots from the NSTX 2010 campaign run. Results show that the edge fluctuation characteristics (fluctuation levels, radial and poloidal correlation lengths) measured using GPI do not vary just prior to the H-mode transition, but change after the transition. Using a velocimetry approach (orthogonal-programming decomposition), velocity fields of a 24 $\times$ 30 cm GPI view during the L-H transition were obtained with good spatial ($\sim$1 cm) and temporal ($\sim$2.5 $\mu$s) resolutions. Analysis using these velocity fields shows that the production term is systematically negative just prior to the L-H transition indicating transfer from mean flows to turbulence, which is inconsistent with the predator-prey paradigm. Moreover, using the inferred absolute value of the production term, an estimate of the L-H transition duration is found to be 25 ms, which is much larger than the measured duration. These discrepancies are further reinforced by consideration of the ratio between the kinetic energy in the mean flow to the thermal free energy, which is estimated to be much less than 1, suggesting again that turbulence depletion mechanism may not be playing an important role in the transition to the H-mode. Although the Reynolds work is too small to directly deplete the turbulent free energy reservoir, order-of-magnitude analysis shows that the Reynolds stress may still make a non-negligible contribution to the observed poloidal flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photochemistry of Methyl Bromide on the α-Cr2O3(0001) Surface

The photochemical properties of the Cr-terminated α-Cr2O3(0001) surface were explored using methyl bromide (CH3Br) as a probe molecule. CH3Br adsorbed and desorbed molecularly from the Cr-terminated α-Cr2O3(0001) surface without detectable thermal decomposition. Temperature programmed desorption (TPD) revealed a CH3Br desorption state at 240 K for coverages up to 0.5 ML, followed by more weakly bound molecules desorbing at 175 K for coverages up to 1 ML. Multilayer exposures led to desorption at ~130 K. The CH3Br sticking coefficient was unity at 105 K for coverages up to monolayer saturation, but decreased as the multilayer formed. In contrast, pre-oxidation of the surface (using an oxygen plasma source) led to capping of surface Cr3+ sites and near complete removal of CH3Br TPD states above 150 K. The photochemistry of chemisorbed CH3Br was explored on the Cr-terminated surface using post-irradiation TPD and photon stimulated desorption (PSD). Irradiation of adsorbed CH3Br with broad band light from a Hg arc lamp resulted in both photodesorption and photodecomposition of the parent molecule at a combined cross section of ~10-22 cm2. Parent PSD was indicative of molecular photodesorption, but CH3 was also detected in PSD and Br atoms were left on the surface, both reflective of photo-induced CH3-Br bond dissociation. Use of a 385 nm cut-off filter effectively shut down the photodissociation pathway but not the parent molecule photodesorption process. From these observations it is inferred that d-to-d transitions in α-Cr2O3, occurring at photon energies <3 eV, are not responsible for photodecomposition of 2 adsorbed CH3Br. It is unclear to what extent band-to-band versus direct CH3Br photolysis play in CH3-Br bond dissociation initiated by more energetic photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The enhanced ASDEX Upgrade pellet centrifuge launcher

Pellets played an important role in the program of ASDEX Upgrade serving both for investigations on efficient particle fuelling and high density scenarios but also for pioneering work on Edge Localised Mode (ELM) pacing and mitigation. Initially designed for launching fuelling pellets from the magnetic low field side, the system was converted already some time ago to inject pellets from the magnetic high field side as much higher fuelling efficiency was found using this configuration. In operation for more than 20 years, the pellet launching system had to undergo a major revision and upgrading, in particular of its control system. Furthermore, the control system installed adjacent to the launcher had to be transferred to a more distant location enforcing a complete galvanic separation from torus potential and a fully remote control solution. Changing from a hybrid system consisting of PLC S5/S7 and some hard wired relay control to a state of the art PLC system allowed the introduction of several new operational options enabling more flexibility in the pellet experiments. This article describes the new system architecture of control hardware and software, the operating procedure, and the extended operational window. First successful applications for ELM pacing and triggering studies are presented as well as utilization for the development of high density scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stellarator Research Opportunities: A Report of the National Stellarator Coordinating Committee

This document is the product of a stellarator community workshop, organized by the National Stellarator Coordinating Committee and referred to as Stellcon, that was held in Cambridge, Massachusetts in February 2016, hosted by MIT. The workshop was widely advertised, and was attended by 40 scientists from 12 different institutions including national labs, universities and private industry, as well as a representative from the Department of Energy. The final section of this document describes areas of community wide consensus that were developed as a result of the discussions held at that workshop. Areas where further study would be helpful to generate a consensus path forward for the US stellarator program are also discussed. The program outlined in this document is directly responsive to many of the strategic priorities of FES as articulated in ‘‘Fusion Energy Sciences: A Ten-Year Perspective (2015–2025)’’ [1]. The natural disruption immunity of the stellarator directly addresses ‘‘Elimination of transient events that can be deleterious to toroidal fusion plasma confinement devices’’ an area of critical importance for the US fusion energy sciences enterprise over the next decade. Another critical area of research ‘‘Strengthening our partnerships with international research facilities,’’ is being significantly advanced on the W7-X stellarator in Germany and serves as a test-bed for development of successful international collaboration on ITER. This report also outlines how materials science as it relates to plasma and fusion sciences, another critical research area, can be carried out effectively in a stellarator. Additionally, significant advances along two of the Research Directions outlined in the report; ‘‘Burning Plasma Science: Foundations—Next-generation research capabilities’’, and ‘‘Burning Plasma Science: Long pulse—Sustainment of Long-Pulse Plasma Equilibria’’ are proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stellarator Research Opportunities: A Report of the National Stellarator Coordinating Committee

This paper is the product of a stellarator community workshop, organized by the National Stellarator Coordinating Committee and referred to as Stellcon, that was held in Cambridge, Massachusetts in February 2016, hosted by MIT. The workshop was widely advertised, and was attended by 40 scientists from 12 different institutions including national labs, universities and private industry, as well as a representative from the Department of Energy. The final section of this document describes areas of community wide consensus that were developed as a result of the discussions held at that workshop. Areas where further study would be helpful to generate a consensus path forward for the US stellarator program are also discussed. The program outlined in this document is directly responsive to many of the strategic priorities of FES as articulated in “Fusion Energy Sciences: A Ten-Year Perspective (2015–2025)” [1]. The natural disruption immunity of the stellarator directly addresses “Elimination of transient events that can be deleterious to toroidal fusion plasma confinement devices” an area of critical importance for the US fusion energy sciences enterprise over the next decade. Another critical area of research “Strengthening our partnerships with international research facilities,” is being significantly advanced on the W7-X stellarator in Germany and serves as a test-bed for development of successful international collaboration on ITER. Finally, this report also outlines how materials science as it relates to plasma and fusion sciences, another critical research area, can be carried out effectively in a stellarator. Additionally, significant advances along two of the Research Directions outlined in the report; “Burning Plasma Science: Foundations—Next-generation research capabilities”, and “Burning Plasma Science: Long pulse—Sustainment of Long-Pulse Plasma Equilibria” are proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SciDAC-Center for Plasma Edge Simulation Report

The Common Component Architecture (CCA) effort is the embodiment of a long-range program of research and development into the formulation, roles, and use of component technologies in high-performance scientific computing. CCA components can interoperate with other components in a variety of frameworks, including SCIRun2 from the University of Utah. The SCIRun2 framework is also developing the ability to connect components from a variety of different models through a mechanism called meta-components. The meta component model operates by providing a plugin architecture for component models. Abstract components are manipulated and managed by the SCIRun2 framework, while concrete component models perform the actual work and communicate with each other directly. We will leverage the SCIRun2 framework and the Kepler system to orchestrate components in the Fusion Simulation Project (FSP) and to provide a CCA-based interface with Kepler. The groundwork for this functionality is being performed with the Scientific Data Management center. The SDM center is developing CCA-compliant interfaces for expressing and executing workflows and create workflow components based on SCIRun and Ptolemy (Kepler) execution engines, including development of uniform interfaces for selecting, starting, and monitoring scientific workflows. Accomplishments include Introduction to CCA and Simulation Software Systems, Introduction into SCIRun2 and Bridging within SCIRun2, CCALoop: A scalable design for a distributed component framework, and Combining Workflow methodologies with Component Architectures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stress Corrosion Cracking Behavior of Cast Stainless Steels

Casting of austenitic stainless steels offers the possibility of directly producing large and/or relatively complex structures, such as the first wall shield modules or the diverter cassette for the ITER fusion reactor. Casting offers major cost savings when compared to fabrication via welding of quarter modules machined from large forgings. However, the strength properties of such cast components are typically considered inferior to those of conventionally forged and annealed components. To improve and validate cast stainless steel as a substitute for wrought stainless steel, a development and testing program was initiated, utilizing nitrogen and manganese additions to promote improved performance. This paper focuses on the response of the first set of developmental alloys to neutron-irradiation and susceptibility to stress corrosion cracking. These cast materials may also have applications for different components in light water reactors. Results showed that all steels exhibited irradiation-induced hardening and a corresponding drop in ductility, as expected, although there is still considerable ductility in the irradiated samples. The cast steels all exhibited reduced hardening in comparison to a wrought reference steels, which may be related to a larger grain size. Higher nitrogen contents did not negatively influence irradiation performance. Regarding stress corrosion cracking susceptibility, the large difference in grain size limits the comparison between wrought and cast materials, and inclusions in a reference and archive cast alloy tests complicate analysis of these samples. Results suggest that the irradiated archive heat was more susceptible to cracking than the modified alloys, which may be related to the more complex microstructure. Further, the results suggest that the modified cast steel is at least as SCC resistant as wrought 316LN. The beneficial effect of nitrogen on the mechanical properties of the alloys remains after irradiation and is not detrimental to SCC resistance.

36 MATERIALS SCIENCE↗

Fusion-Enabled Pluto Orbiter and Lander

Direct Fusion Drive (DFD) is a unique fusion engine concept based on the Princeton Field-Reversed Configuration (PFRC) fusion reactor conceived by Dr. Sam Cohen of the Princeton Plasma Physics Laboratory. DFD would enable the Pluto orbiter and lander context mission and more broadly enable true "rapid transit" to outer-planet and near interstellar space. The truly game-changing levels of thrust and power in a modestly sized package could integrate with our current launch infrastructure while radically expanding the science capability of these missions. Our Phase I was our first funded work on the DFD, with previous work at PSS occurring only under internal R&D. We established the feasibility of our Pluto mission trajectories using straight-line and planar models, including a departure spiral from Earth and insertion at Pluto. We developed our first thrust and specific impulse model using the results of the UEDGE multi-fluid code. Our specific power model was improved. During this Phase II effort, we continued our efforts to increase the fidelity of the designs for the RF, magnet, and shielding subsystems. Dedicated thrust augmentation experiments were run on the PFRC experiment, using a supersonic gas puffing valve. For the first time, we analyzed the design of a closed-loop operation mode and estimated the hardware that would be required for a dual-mode engine. In an exciting new development, we have invented a new thermophotovoltaic thermal conversion method that has the potential to have efficiencies of a Brayton or Stirling system. Our report presents details of these analyses. Our roadmap to bringing DFD to flight predicts that with sufficient support, a first flight unit could be built by 2040. We anticipate that three machine generations are required before this point: a ~1 T PFRC-3 machine hitting new plasma temperature and density levels, a ~5 T PFRC-4 machine with first demonstration of D-3He fusion, and a flight. (The current experiment, PFRC-2, is limited to about 0.1 T). In order to achieve a flight in 2035-2040, the TRL of the supporting systems must be increased in parallel, including low mass radiators, cryogenic propellant storage, and large (>100 kW) thermal conversion systems. Fortunately, many of these systems are dual-use and are required for other technologies including fission systems, so DFD would contribute to and benefit from those programs. This NIAC support and the results of our work have led to multiple follow-on contracts. We won two NASA STTRs focused on DFD subsystems, one on the RF system and one on the superconducting magnets, and our magnet STTR is now midway through a Phase II. We will be receiving a superconducting test magnet for experiments at PPPL this summer. In addition, we won an ARPA-E OPEN grant; this is the first time that OPEN has included fusion technologies, and we are part of a cohort of three alternative fusion companies now supported directly by DOE. We are very optimistic that if we are able to meet our experimental milestones in the next 12-18 months, we will be competitive for additional DOE grants to build PFRC-3.

Propulsion↗

Plasma Wall Interaction with 3-D Plasma Boundaries

The interaction of the edge plasma and the material surfaces is one of the most critical challenges on the path to harness fusion power as new, fundamental energy source. This challenge typically combines the thrust to reach high density, low temperature (detached) plasmas in front of the divertor target plates as well as understanding the plasma material interaction (PMI) in particular in this regime. The combination of both research thrusts represents an extraordinarily challenging subject encompassing spatial scales spanning nanometers to meters in all states of matter and across a broad energy range. Modeling capabilities, which help to interpret data from nowadays experiments and enable extrapolation to future devices are urgently required. This is in particular true for toroidal magnetic confinement devices with three-dimensional (3D) plasma boundaries. Such plasma boundary geometries occur in tokamaks, when small amplitude magnetic perturbations are used to stabilize the unruly edge plasma or in stellarators, that are inherently 3D plasma confinement devices. In this project, the impact of 3D plasma boundaries on the plasma material interaction (PMI) was assessed. This work focused on plasma boundary conditions, in which high-density conditions at the material surfaces yield mitigation of the otherwise immense heat and particle loads that these materials would see. These so-called high recycling and eventually detached plasma regimes are of great interest for future reactor operation. In the project, key features that are unique to 3D boundaries were explored in comparison to canonically assumed axisymmetric plasma edge situations in tokamaks. In particular, the relevance of the 3D boundary situation in the extrapolation to the plasma boundary solution at ITER, the next step fusion energy experiment under construction as a multi-national, world-wide large-science experiment in southern France, has been explored. The EMC3-EIRENE plasma edge fluid and kinetic neutral transport code has been advanced to cope with the challenging and unprecedented conditions in the ITER boundary plasma including 3D fields that are planned to be used to suppress harmful edge instabilities, the so-called edge localized modes. This is a vital integration challenge for ITER and the results from this grant have provide a leading capability for this assessment. It was shown that the detachment process in a 3D edge solution for ITER follows the recycling regimes that are known from axisymmetric solutions, but that multiple plasma exhaust channels connected to the material surfaces are established which feature individual recycling characteristics. Because these channels touch the material surfaces in the divertor in a 3D geometry, the compatibility with the plasma material interaction (PMI), including erosion and impurity generation has been found to be an important part of the integration challenge. To address this, the fully 3D plasma material interaction code ERO2 has been adapted to these ITER specific geometries and a homogeneous mixing model was implemented, that allows to consider the mixing of Be and Was used at ITER in the PMI modeling. This model enhancement has been used to study non-local migration of Be in the JET ITER like wall configuration and it has been shown that with this model such complex migration processes in ITER relevant plasma shapes and with ITER relevant plasma boundary conditions can be addressed. The combined modeling approach using EMC3-EIRENE as a plasma boundary transport code and the ERO2 specialized PMI model will be an asset for the continued preparations of ITER operation as well as for Fusion Pilot Plant efforts that have emerged in the U.S. during the evolution of this grant. The predictive capability of this numerical tool has been validated at the DIII-D US national fusion facility. Here, dedicated plasma edge diagnostics were implemented to measure the impurity household around a 3D edge plasma during ELM suppression by 3D fields. Dedicated experiments with local material probes using these diagnostics and the state-of-the-art suite of boundary measurements at DIII-D have shown that the 3D perturbation of the plasma edge that is excreted by such 3D control fields yield a perturbation of the plasma boundary flux structure and hence also of the resulting PMI. The 3D boundary plasma is composed out of helical magnetic flux channels that intersect the divertor targets at an angle relative to the main guiding field, i.e., the toroidal magnetic field component of the tokamak. A similar effect has been measured as well on limiter surfaces during the startup campaign at the new stellarator experiment Wendelstein 7-X. These experiments ad initial analysis with the ERO plasma material interaction model, suggested that the place of erosion for a given particle from the surface and its re-deposition can be different in such 3D field geometries yielding potentially a significant level of net-erosion. This is not the case for axisymmetric solutions, where it was shown in the past that the eroded particles are effectively re-deposited into gaps produced by erosion at the same position and hence the net-erosion levels are small. For ITER, the quest to suppress the ELMs and at the same time maintain the integrity of the divertor is an issue, which these fundamental findings will help to resolve. The coupling of this work to the extrapolation in the ITER program has been addressed by both the PI and the lead numerical scientist being ITER Science Fellows in the duration of the contract and forward. A second focus in the exploration of 3D boundary effects on tokamaks and stellarators has been set on the measurement of helium exhaust features with such 3D fields. This is important because He represents the ash of the fusion process and needs to be exhausted. It was shown that 3D field application compatible with suppression of ELMs yields an increase of the helium exhaust performance. The ratio of the effective helium confinement time over the energy confinement time was reduced by almost 50% which demonstrated that the impact of helium accumulation in the plasma core with respect to the confinement of energy to sustain the fusion reaction is significantly improved with such 3D control fields. It was shown that this is the case for tokamaks as well as stellarators. At the Large helical Device in Japan, a similar enhancement of the helium exhaust features when small amplitude additional 3D fields were applied was measured. This is an important additional function of 3D field application and its impact on ITER is presently being studied in combination with investigations of helium exhaust in 3D field geometries of stellarator devices.

3D plasma edge transport↗

RF-Plasma Source Commissioning in Indian Negative Ion Facility

The Indian program of the RF based negative ion source has started off with the commissioning of ROBIN, the inductively coupled RF based negative ion source facility under establishment at Institute for Plasma research (IPR), India. The facility is being developed under a technology transfer agreement with IPP Garching. It consists of a single RF driver based beam source (BATMAN replica) coupled to a 100 kW, 1 MHz RF generator with a self excited oscillator, through a matching network, for plasma production and ion extraction and acceleration. The delivery of the RF generator and the RF plasma source without the accelerator, has enabled initiation of plasma production experiments. The recent experimental campaign has established the matching circuit parameters that result in plasma production with density in the range of 0.5-1x10{sup 18}/m{sup 3}, at operational gas pressures ranging between 0.4-1 Pa. Various configurations of the matching network have been experimented upon to obtain a stable operation of the set up for RF powers ranging between 25-85 kW and pulse lengths ranging between 4-20 s. It has been observed that the range of the parameters of the matching circuit, over which the frequency of the power supply is stable, is narrow and further experiments with increased number of turns in the coil are in the pipeline to see if the range can be widened. In this paper, the description of the experimental system and the commissioning data related to the optimisation of the various parameters of the matching network, to obtain stable plasma of required density, are presented and discussed.

43 PARTICLE ACCELERATORS↗

The long road to ignition: An eyewitness account

This paper reviews the many twists and turns in the long journey that culminated in ignition in late 2022 using the laser heated indirect-drive approach to imploding DT filled targets at the National Ignition Facility (NIF), located at the Lawrence Livermore National Laboratory (LLNL). We describe the early origins of the Laser Program at LLNL and key developments such as the paradigm shifting birth of high energy density physics (HEDP) studies with lasers, changes in choice of laser wavelength, and the development of key diagnostics and computer codes. Fulfilling the requirements of the multi-faceted Nova Technical Contract was a necessary condition for the approval of the NIF, but more importantly, the end of the Cold War and the cessation of nuclear testing were key catalysts in that approval, along with the ready-and-waiting field of HEDP. The inherent flexibility of the field of laser driven inertial confinement fusion played a fundamental role in achieving success at the NIF. We describe how the ultimately successful ignition target design evolved from the original “point design” target, through the lessons of experiment. All key aspects of that original design changed: The capsule's materials and size were changed; the hohlraum's materials, size, laser entrance hole size, and gas fills were also all changed, as were the laser pulse shapes that go along with all those changes. The philosophy to globally optimize performance for stability (by raising the adiabat and thus lowering the implosion convergence) was also key, as was progress in target fabrication, and in increasing NIF's energy output. The persistence of the research staff and the steadfast backing of our supporters were also necessary elements in this success. We gratefully acknowledge seven decades of researcher endeavors and four decades of the dedicated efforts of many hundreds of personnel across the globe who have participated in NIF construction, operation, target fabrication, diagnostic, and theoretical advances that have culminated in ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Distributed Magnetic Measurements Using Fiber Optic Pulsed Polarimetry (Final Report)

Measurement of the magnetic fields surrounding magnetic fusion energy (MFE) devices, such as tokamaks, is critical for characterizing and monitoring the plasma inside these devices, and it is especially important for detecting plasma instabilities, which can lead to the plasma damaging the inside of these devices. This program successfully demonstrated a new type of magnetic field diagnostic that is capable for the first time of measuring simultaneously the spatial and temporal magnetic field distributions of MFE devices in real-time and with high resolution. This is a capability not feasible with existing magnetic field diagnostics and, moreover, the technique we developed provides other advantages, such as less susceptibility to noise, the ability to operate during both pulsed and steady-state plasma conditions, the ability to detect relatively weak poloidal fields, and potentially lower costs. This new capability of being able in real-time to detect anomalies in the magnetic field distribution corresponding to the onset of plasma instabilities offers the ability to automatically shut down the MFE device before the plasma can damage the machine. Hence, this machine protection capability can be vital for future fusion power stations. Our technique uses optical fibers where changes in the polarization of the laser light traveling through the fiber provide a direct measurement of the magnetic field at any point along the fiber. The small size of the fibers allows them to be easily installed either outside or inside the MFE vacuum vessel, and in any direction one wishes (e.g., poloidal or toroidal). We demonstrated the basic capabilities of our new diagnostic during a proof-of-principle experiment performed on the General Atomics DIII-D tokamak, and published the results in: W. D. Kimura, D. S. Dhillon, S. Munaretto, E. J. Strait, D. Du, S. Loranger, J.-S. Boisvert, and R. Kashyap, “Measurements of DIII-D poloidal field by fiber-optic pulsed polarimetry,” Rev. Sci, Inst. 89, 10J102 (2018).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conductive Channel for Energy Transmission

For many years the attempts to create conductive channels of big length were taken in order to study the upper atmosphere and to settle special tasks, related to energy transmission. There upon the program of creation of 'Impulsar' represents a great interest, as this program in a combination with high-voltage high repetition rate electrical source can be useful to solve the above mentioned problems (N. Tesla ideas for the days of high power lasers). The principle of conductive channel production can be shortly described as follows. The 'Impulsar' - laser jet engine vehicle - propulsion take place under the influence of powerful high repetition rate pulse-periodic laser radiation. In the experiments the CO{sub 2}-laser and solid state Nd:YAG laser systems had been used. Active impulse appears thanks to air breakdown (<30 km) or to the breakdown of ablated material on the board (>30 km), placed in the vicinity of the focusing mirror-acceptor of the breakdown waves. With each pulse of powerful laser the device rises up, leaving a bright and dense trace of products with high degree of ionization and metallization by conductive nano-particles due to ablation. Conductive dust plasma properties investigation in our experiments was produced by two very effective approaches: high power laser controlled ablation and by explosion of wire. Experimental and theoretical results of conductive canal modeling will be presented. The estimations show that with already experimentally demonstrated figures of specific thrust impulse the lower layers of the Ionosphere can be reached in several ten seconds that is enough to keep the high level of channel conductivity and stability with the help of high repetition rate high voltage generator. Some possible applications for new technology are highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗