Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Development and Validation of a Canfield Joint as a Precision Pointing System for Deep Space Instrumentation

A mission plan for an integrated radio and optical communications payload, based on the Mars Reconnaissance Orbiter, is presented with emphasis on the derivation of precision pointing requirements. The Canfield joint, a parallel robotic linkage capable of hemispherical pointing, is discussed as a platform for optical communication and other deep space instrumentation. The capabilities of a prototype are compared to those of currently available gimbals qualified for deep space, and the advantages of the Canfield joint, including size, weight and power (SWaP) savings, cable handling, and mechanical redundancy, are discussed. Validation procedures and results for the space hardware prototype are presented. This work was undertaken through the Integrated Radio and Optical Communication (iROC) project at NASA Glenn Research Center.

Laser optical communications↗

Stokes resolved differential temperature: an important metric of polarimetric precision in the long-wave infrared

In remote sensing, radiometric measurements taken in the mid-wave infrared and beyond (λ >3μm) are commonly reported in units of Kelvin by utilizing Planck’s radiation law to relate measured radiance and target brightness temperature (Tb). Thus, it is desirable to match this formalism in thermal polarimetry and report the unnormalized Stokes parameters in units of K instead of radiance (Wm−2sr−1). This approach also al-lows common performance metrics in long-wave infrared (LWIR) imaging such as Noise Equivalent DifferentialTemperature (NEDT) to be modified and extended to metrics of polarimetric accuracy and precision. However, since the relationship between measured radiance and Tb are non-linear, the conversion of I, Q, and U in units of radiance to Tb,Tb,Q, and Tb,U in K is ambiguous. As a solution a metric of performance for thermal linear Stokes polarimetry, the Stokes resolved differential temperature (SRDT), is introduced.

polarimetry↗

Precision Measurement of a Brown Dwarf Mass in A Binary System in the Microlensing Event OGLE-2019-BLG-0033/MOA-2019-BLG-035

Context. Brown dwarfs are transition objects between stars and planets that are still poorly understood, for which several competing mechanisms have been proposed to describe their formation. Mass measurements are generally difficult to carry out for isolated objects as well as for brown dwarfs orbiting low-mass stars, which are often too faint for a spectroscopic follow-up. Aims. Microlensing provides an alternative tool for the discovery and investigation of such faint systems. Here, we present an analysis of the microlensing event OGLE-2019-BLG-0033/MOA-2019-BLG-035, which is caused by a binary system composed of a brown dwarf orbiting a red dwarf. Methods. Thanks to extensive ground observations and the availability of space observations from Spitzer, it has been possible to obtain accurate estimates of all microlensing parameters, including the parallax, source radius, and orbital motion of the binary lens. Results. Following an accurate modeling process, we found that the lens is composed of a red dwarf with a mass of M(1) = 0:149 ± 0.010 M⊙ and a brown dwarf with a mass of M(2) = 0:0463 ± 0:0031 M at a projected separation of a⊥ = 0:585 au. The system has a peculiar velocity that is typical of old metal-poor populations in the thick disk. A percent-level precision in the mass measurement of brown dwarfs has been achieved only in a few microlensing events up to now, but will likely become more common in the future thanks to the Roman space telescope.

gravitational lensing↗

Extended Temperature Operation of Isolated, Precision Gate Driver, ADuM4120

Electronics used in space missions encounter exposure to extreme temperatures and operation under wide thermal swings. Most commercial-off-the-shelf (COTS) devices are not designed to function under such extreme conditions and very little data exist on their performance outside their specified range of operation. Extending the temperature range at which electronic parts can operate reliably leads to potential benefits resulting in improving reliability, reducing mass/weight, and simplifying thermal design due to elimination of thermal control elements and fewer parts count. In this work, the performance of an isolated, precision gate driver for controlling power-level transistors, including gallium nitride (GaN) and silicon carbide (SiC) devices, was evaluated under extreme temperatures and thermal cycling. The investigations were carried out to assess performance for potential use of this device in space exploration missions under extreme temperature conditions.

Wide Bandgap Power Electronics↗

Development of an Apparatus and Process for Precision Measurement of Cryogenic Thermal Expansion of Materials

NASA frequently needs thermal contraction data for materials to be used in cryogenic space flight missions. To satisfy this need, we developed an apparatus and a high-precision technique for performing such measurements using a commercial fiber-optic-based position sensor. We describe the measurement process and its verification using a copper sample. We also present data for two materials which we characterized for potential NASA use.

Cryogenic↗

Precision of Spacecraft Doppler Tracking at Low Signal-to-Noise Ratios

The signal-to-noise ratio received at Earth is typically larger than 10 dB-Hz for radio tracking of a spacecraft in deep space, allowing a phase-locked loop to execute reliable carrier tracking. Recently, missions have been proposed to utilize low-gain antennas for Doppler tracking where the signal-to-noise ratio may be at the single-digit (dB-Hz) level. In this work, we discuss spacecraft Doppler tracking at these low signal-to-noise ratios through an analysis of thermal noise on the radio link, results from ground testing with the Deep Space Network, and demonstrations with an active spacecraft. We show that by utilizing an open-loop receiver to capture the carrier signal and by applying post-processing techniques, radio data with the signal-to-noise ratio as low as 4 dB-Hz can be used to derive Doppler data with precision sufficient for tracking a spacecraft in deep space.

D. R. Buccino↗

High Precision Relative Position Sensing System for Formation Flying Spacecraft

Three candidate sensors under development - Longitudinal Sensing: Precision Laser Ranger (PLR) - Periodic laser pulses are reflected off a distant target. - Heterodyne analysis of returning pulses enables high resolution ranging. - Transverse Sensing = Transverse Alignment Sensor (TAS) - Laser beam is focused onto distant laser position sensor. - Analog sensor provides coordinates of spot on sensor. - 3D PLR: Alternative approach to transverse sensing: - Combine PLR with 3D target covered with retroreflective material. - 6 degree of freedom sensing using PLR. - May eliminate need for TAS.

Anne-Marie Novo-Gradac↗

Safe and Precise Landing Integrated Capabilities Evolution (SPLICE)

NASA needs for entry, descent, and landing call for improved Precision Landing and Hazard Avoidance (PL&HA) technologies. SPLICE continues to develop, mature, demonstrate, and infuse these technologies as a portfolio. SPLICE will achieve TRL 5 on a hazard detection lidar mapping sensor and TRL 6 on two key flight software libraries for advanced guidance and hazard detection. A High-Performance Space Computing surrogate multiprocessor (ARM A53) integrates sensors and FSW. This portfolio of technologies may be infused separately or fully integrated.

Guidance Navigation and Control↗

In-Space Modular Assembly: An Approach for Reliable, Affordable, Precision Space Apertures

In-space assembly will revolutionize the creation, upgrade, and evolution of future space systems. In-space assembly represents an alternative deployment strategy that is not constrained by the requirement of using a single launch vehicle and enables a greater freedom of design for the initial emplacement of assets and their evolution over time. In-space assembly enables assets, such as observatories and science platforms, to become persistent, evolving over time like their terrestrial counterparts. Also, in-space assembly provides a direct path for utilization of in-space manufactured components designed exclusively for the operational environment. To highlight the advantages of an in-space assembly approach, the modular assembly of a 3 m to 4 m precision optical aperture based on thin meniscus technology coupled with structurally efficient TriTruss modules is presented. The 3 m to 4 m aperture stows compactly within two standard ride share slots (0.61 m by 0.71 m by 0.97 m). Placing instruments and the robotic system used for assembly in an adjacent ride share slot enables a capable observatory to be placed into service via modest ride share opportunities. Further, recent hardware assembly tests of similar modules and progress toward hardware tests to validate the overall architecture via diffraction limited testing will be summarized.

Design↗

Completing a Prototype Rocket Instrument that uses Precise Laser Measurements of Miniscule Sensor Displacements to Determine Upper Atmosphere Properties

IRAD develops and tests a laser position sensing concept to provide precise knowledge of the position of electric field spheres at the end of booms from which information of upper atmosphere properties can be determined. IRAD develops laser measurement concepts using small, inexpensive laser position sensors and building on space-based laser developments at Goddard. A prototype assembly using “paddles” has been designed to demonstrate their use on future sounding rocket and satellite missions.

Instrumentation↗

In-Space Modular Assembly: An Approach for Reliable, Affordable, Precision Space Apertures

In-space assembly will revolutionize the creation, upgrade, and evolution of future space systems. In-space assembly represents an alternative deployment strategy that is not constrained by the requirement of using a single launch vehicle and enables a greater freedom of design for the initial emplacement of assets and their evolution over time. In-space assembly enables assets, such as observatories and science platforms, to become persistent, evolving over time like their terrestrial counterparts. Also, in-space assembly provides a direct path for utilization of in-space manufactured components designed exclusively for the operational environment. To highlight the advantages of an in-space assembly approach, the modular assembly of a 3 m to 4 m precision optical aperture based on thin meniscus technology coupled with structurally efficient TriTruss modules is presented. The 3 m to 4 m aperture stows compactly within two standard ride share slots (0.61 m by 0.71 m by 0.97 m). Placing instruments and the robotic system used for assembly in an adjacent ride share slot enables a capable observatory to be placed into service via modest ride share opportunities. Further, recent hardware assembly tests of similar modules and progress toward hardware tests to validate the overall architecture via diffraction limited testing will be summarized.

Design↗

NASA Space Observatory Precision Pointing Benchmark Problem Development

An interagency workshop in May 2021 on guidance, navigation, and control (GNC) verification and validation (V&V) methods and techniques identified needs for the formulation and public release of relevant V&V benchmark problems as a practical way forward for the discipline. A decision was made by the NASA Technical Fellow for GNC and the NASA Engineering and Safety Center (NESC) GNC Technical Discipline Team (TDT) to produce a benchmark problem focusing on the problem of space observatory precision pointing. This report contains the results of the NESC assessment.

NASA Engineering and Safety Center↗

Flight Test Evaluation of Autonomous Descending-Decelerating Precision Point-in-Space Approach to the Ground

New forms of highly automated Advanced Air Mobility (AAM) aircraft, such as electric vertical take-off and landing (eVTOL) vehicles, could transform transportation, cargo delivery, and a variety of public services. The National Aeronautics and Space Administration (NASA) conducted a series of flight demonstrations in collaboration with the Defense Advanced Research Projects Agency (DARPA) and Sikorsky Aircraft (a Lockheed Martin company) to progressively evaluate autonomous technologies. The autoland flight test research is a first in series for investigating the world’s first procedural descending-decelerating automated landing with vertical guidance Instrument Flight Procedures (IFP). The Sikorsky Optionally Piloted Vehicle (OPV) experimental UH-60 Black Hawk was used to evaluate a flight path’s four-dimensional trajectory (4DT) management into primitive commands and then follow those commands to a Point-in-Space (PinS) landing to the ground. All flight procedures were manually flown to the ground at 12 degrees with a 20-knot tail wind to ensure flight safety before automation was engaged. New and novel high precision approach procedures could pave the way for all future VTOL operations.

David Zahn↗

The GEODYN Precision Orbit Determination Software

GEODYN-II is NASA’s state-of-the-art geodetic parameter estimation and precision orbit determination (POD) system, developed at Goddard Space Flight Center and maintained within the Geodesy and Geophysics Laboratory. GEODYN supports POD and geodetic parameter estimation for both Earth orbiting and planetary/planetary body missions. It implements a comprehensive set of high-fidelity force models for integrating satellite orbits. GEODYN supports approximately 100 measurement types, including support for Global Navigation Satellite System (GNSS), Satellite Laser Ranging (SLR), Doppler Orbitography and Radio positioning Integrated by Satellite (DORIS), Very Long Base Interferometry (VLBI), landmark (camera data), landmark crossovers, radar and laser direct altimeter ranging, and dynamic altimetry crossovers.

Joseph B Nicholas↗

Precise Determination of the 1s Lamb Shift in Hydrogen-Like Lead and Gold Using Microcalorimeters

Quantum electrodynamics in very strong Coulomb fields is one scope which has not yet been tested experimentally with sufficient accuracy to really determine whether the perturbative approach is valid. One sensitive test is the determination of the 1s Lamb shift in highly-charged very heavy ions. The 1s Lamb shift of hydrogen-like lead (Pb81+) and gold (Au78+) has been determined using the novel detector concept of silicon microcalorimeters for the detection of hard x-rays. The results of (260 +/- 53) eV for lead and (211 +/- 42) eV for gold are within the error bars in good agreement with theoretical predictions. To our knowledge, for hydrogen-like lead, this represents the most accurate determination of the 1s Lamb shift.

microcalorimeters for↗