Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pattern Factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Torsionally mediated spin-rotation hyperfine splittings at moderate to high J values in methanol

This paper presents an explanation based on torsionally mediated proton-spin–overall-rotation interaction for the observation of doublet hyperfine splittings in some Lamb-dip sub-millimeter-wave transitions between ground-state torsion-rotation states of E symmetry in methanol. These unexpected doublet splittings, some as large as 70 kHz, were observed for rotational quantum numbers in the range of J = 13 to 34, and K = − 2 to +3. Because they increase nearly linearly with J for a given branch, we confined our search for an explanation to hyperfine operators containing one nuclear-spin angular momentum factor I and one overall-rotation angular momentum factor J (i.e., to spin-rotation operators) and ignored both spin-spin and spin-torsion operators, since they contain no rotational angular momentum operator. Furthermore, since traditional spin-rotation operators did not seem capable of explaining the observed splittings, we constructed totally symmetric “torsionally mediated spin-rotation operators” by multiplying the E-species spin-rotation operator by an E-species torsional-coordinate factor of the form e{sup ±niα}. The resulting operator is capable of connecting the two components of a degenerate torsion-rotation E state. This has the effect of turning the hyperfine splitting pattern upside down for some nuclear-spin states, which leads to bottom-to-top and top-to-bottom hyperfine selection rules for some transitions, and thus to an explanation for the unexpectedly large observed hyperfine splittings. The constructed operator cannot contribute to hyperfine splittings in the A-species manifold because its matrix elements within the set of torsion-rotation A{sub 1} and A{sub 2} states are all zero. The theory developed here fits the observed large doublet splittings to a root-mean-square residual of less than 1 kHz and predicts unresolvable splittings for a number of transitions in which no doublet splitting was detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FAST MODES AND DUSTY HORSESHOES IN TRANSITIONAL DISKS

The brightest transitional protoplanetary disks are often azimuthally asymmetric: their millimeter-wave thermal emission peaks strongly on one side. Dust overdensities can exceed ∼100:1, while gas densities vary by factors less than a few. We propose that these remarkable ALMA observations—which may bear on how planetesimals form—reflect a gravitational global mode in the gas disk. The mode is (1) fast—its pattern speed equals the disk's mean Keplerian frequency; (2) of azimuthal wavenumber m = 1, displacing the host star from the barycenter; and (3) Toomre-stable. We solve for gas streamlines including the indirect stellar potential in the frame rotating with the pattern speed, under the drastic simplification that gas does not feel its own gravity. Near corotation, the gas disk takes the form of a horseshoe-shaped annulus. Dust particles with aerodynamic stopping times much shorter or much longer than the orbital period are dragged by gas toward the horseshoe center. For intermediate stopping times, dust converges toward a ∼45° wide arc on the corotation circle. Particles that do not reach their final accumulation points within disk lifetimes, either because of gas turbulence or long particle drift times, conform to horseshoe-shaped gas streamlines. Our mode is not self-consistent because we neglect gas self-gravity; still, we expect that trends between accumulation location and particle size, similar to those we have found, are generically predicted by fast modes and are potentially observable. Unlike vortices, global modes are not restricted in radial width to the pressure scale height; their large radial and azimuthal extents may better match observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Highly dispersive magnons with spin-gap-like features in the frustrated ferromagnetic S = 1 2 chain compound Ca 2 Y 2 Cu 5 O 10 detected by inelastic neutron scattering

In this paper, we report inelastic neutron scattering experiments in Ca 2 Y 2 Cu 5 O 10 and map out the full one-magnon dispersion which extends up to a record value of 53 meV for frustrated ferromagnetic (FM) edge-sharing CuO 2 chain (FFESC) cuprates. A homogeneous spin-1/2 chain model with a FM nearest-neighbor (NN), an antiferromagnetic (AFM) next-nearest-neighbor (NNN) inchain, and two diagonal AFM interchain couplings (ICs) analyzed within linear spin-wave theory (LSWT) reproduces well the observed strong dispersion along the chains and a weak one perpendicularly. The ratio α=| J a 2 / J a 1 | of the FM NN and the AFM NNN couplings is found as ~0.23, close to the critical point α c =1/4 which separates ferromagnetically and antiferromagnetically correlated spiral magnetic ground states in single chains, whereas α c >0.25 for coupled chains is considerably upshifted even for relatively weak IC. Although the measured dispersion can be described by homogeneous LSWT, the scattering intensity appears to be considerably reduced at ~11.5 and ~28 meV. The gaplike feature at 11.5 meV is attributed to magnon-phonon coupling whereas based on density matrix renormalization group simulations of the dynamical structure factor the gap at 28 meV is considered to stem partly from quantum effects due to the AFM IC. Another contribution to that gap is ascribed to the intrinsic superstructure from the distorting incommensurate pattern of CaY cationic chains adjacent to the CuO 2 ones. It gives rise to nonequivalent CuO 4 units and Cu-O-Cu bond angles Φ and a resulting distribution of all exchange integrals. The J 's fitted by homogeneous LSWT are regarded as average values. The record value of the FM NN integral J 1 =24 meV among FFESC cuprates can be explained by a nonuniversal Φ(≠90°) and Cu-O bond length dependent anisotropic mean direct FM Cu-O exchange $\overline{K}_{pd}$~120 meV, similar to a value of 105 meV for Li 2 CuO 2 , in accord with larger values for La 2 CuO 4 and CuGeO 3 (~110 meV) reported by Braden et al . [Phys. Rev. B 54, 1105 (1996)] phenomenologically. Lastly, enhanced $K_{pd}$ values are also needed to compensate a significant AFM J dd ≥ 6 meV from the dd channel, generic for FFESC cuprates but ignored so far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonmonotonic effect of chemical heterogeneity on interfacial crack growth at high-angle grain boundaries in Fe-Ni-Cr alloys

Here, an intermittent pattern is observed in the modeling of interfacial cyclic-loading crack growth at high-angle grain boundaries in ternary Fe-Ni-Cr alloys. Different from conventional wisdom of stress-intensity factor, the abrupt crack advances are found driven by extreme value statistics—namely, the aggregation of atoms with most compressive residual stresses. In addition, inherently non-affine atomic stress fluctuations are discovered, and the fluctuations peak at intermediate level of chemical heterogeneity, causing the fastest crack growth. Implications of such nonmonotonic mechanism in regard to the origin of intermediate-temperature embrittlement phenomena are also discussed.

36 MATERIALS SCIENCE↗

ATLAS jet trigger update for the LHC run II

The CERN Large Hadron Collider is the biggest and most powerful particle collider ever built. It produces up to 40 million proton-proton collisions per second at unprecedented energies to explore the fundamental laws and properties of Nature. The ATLAS experiment is one of the detectors that analyses and records these collisions. It generates dozens of GB/s of data that has to be reduced before it can be permanently stored, the event selection is made by the ATLAS trigger system, which reduces the data volume by a factor of 105. The trigger system has to be highly configurable in order to adapt to changing running conditions and maximize the physics output whilst keeping the output rate under control. A particularly interesting pattern generated during collisions consists of a collimated spray of particles, known as a hadronic jet. To retain the interesting jets and efficiently reject the overwhelming background, optimal jet energy resolution is needed. Therefore the Jet trigger software requires CPU-intensive reconstruction algorithms. In order to reduce the resources needed for the reconstruction step, a partial detector readout scheme was developed, which effectively suppresses the low activity regions of the calorimeter. In this paper we describe the overall ATLAS trigger software, and the jet trigger in particular, along with the improvements made on the system. We then focus on detailed studies of the algorithm timing and the performance impact of the full and partial calorimeter readout schemes. We conclude with an outlook of the jet trigger plans for the next LHC data-taking period. (authors)

43 PARTICLE ACCELERATORS↗

Compositional and Structural Characterization by TEM of Lattice-Mismatched III-V Epilayers

We discuss compositional and structural transmission electron microscopy (TEM) characterization of lattice-mismatched (LMM) III-V epilayers grown on GaAs by metalorganic chemical vapor deposition (MOCVD), with possible applications in high-efficiency multijunction solar cells. In addition to the use of TEM imaging to survey layer thicknesses and defect morphology, our analysis emphasizes the particular methods of energy-dispersive X-ray spectrometry (EDX) and convergent-beam electron diffraction (CBED). Outlined here is a standards-based method for extracting compositions by EDX, which uses principal-component analysis (PCA) [1], combined with the zeta-factor approach of Watanabe and Williams [2]. A procedure is described that uses the coordinates of high-order Laue zone (HOLZ) lines, which are found in the bright-field disks of CBED patterns, to extract composition and strain parameters from embedded epilayers. The majority of the crystal growth for this work was performed at NREL, which has accommodated the development at SDSM&T of the characterization techniques described. However, epilayer deposition capability at SDSM&T has recently been achieved, using a home-built system, which is presently being used to examine new lattice-mismatched structures relevant to photovoltaic technology.

14 SOLAR ENERGY↗

Enrichment of HP1a on Drosophila Chromosome 4 Genes Creates an Alternate Chromatin Structure Critical for Regulation in this Heterochromatic Domain

Chromatin environments differ greatly within a eukaryotic genome, depending on expression state, chromosomal location, and nuclear position. In genomic regions characterized by high repeat content and high gene density, chromatin structure must silence transposable elements but permit expression of embedded genes. We have investigated one such region, chromosome 4 of Drosophila melanogaster. Using chromatin-immunoprecipitation followed by microarray (ChIP–chip) analysis, we examined enrichment patterns of 20 histone modifications and 25 chromosomal proteins in S2 and BG3 cells, as well as the changes in several marks resulting from mutations in key proteins. Active genes on chromosome 4 are distinct from those in euchromatin or pericentric heterochromatin: while there is a depletion of silencing marks at the transcription start sites (TSSs), HP1a and H3K9me3, but not H3K9me2, are enriched strongly over gene bodies. Intriguingly, genes on chromosome 4 are less frequently associated with paused polymerase. However, when the chromatin is altered by depleting HP1a or POF, the RNA pol II enrichment patterns of many chromosome 4 genes shift, showing a significant decrease over gene bodies but not at TSSs, accompanied by lower expression of those genes. Chromosome 4 genes have a low incidence of TRL/GAGA factor binding sites and a low Tm downstream of the TSS, characteristics that could contribute to a low incidence of RNA polymerase pausing. Our data also indicate that EGG and POF jointly regulate H3K9 methylation and promote HP1a binding over gene bodies, while HP1a targeting and H3K9 methylation are maintained at the repeats by an independent mechanism. The HP1a-enriched, POF-associated chromatin structure over the gene bodies may represent one type of adaptation for genes embedded in repetitive DNA.

59 BASIC BIOLOGICAL SCIENCES↗

Final Report for “The Genomic Basis of Heterosis in High-Yielding Triploid Hybrids of Willow ( Salix spp.) Bioenergy Crops”

Many studies have highlighted the complex, multigenic basis for heterosis (hybrid vigor) in inbred crops. Despite the lack a consensus model, it is vital that we turn our attention to understanding heterosis in undomesticated, outcrossing, heterozygous, and often polyploid species, such as willow ( Salix ). Shrub willow is a dedicated energy crop and is bred to be fast-growing and high-yielding on marginal land without competing with food crops. A trend in willow breeding is the consistent pattern of heterosis in triploid progeny produced from crosses between diploid and tetraploid species. Critical in understanding heterosis, the heritability of gene expression is dependent on allele-specific expression by local and remote factors in the genome. Here, we tested whether differentially expressed genes are responsible for heterosis in triploid crosses made between diploid S. purpurea , diploid S. viminalis , and tetraploid S. miyabeana parents. Three biological replicates of progeny and parent shoot tips were collected after 11 weeks in the greenhouse and individually sequenced via RNA-Seq (2×101). Our results highlight regulatory factors influencing differential expression and top modules of co-expressed genes correlated with heterosis for phenotypes collected in the greenhouse and in the field. We also show in diploid F 1 and F 2 S. purpurea that expression-level dominance and sex dimorphic expression is pervasive in shoot tips. Gene expression in triploids largely matches expected dosage values, but there are interesting categories of genes whose expression is divergent from expected dosage of alleles. Candidate genes have been identified whose differential expression be confirmed via allele-specific assays. Altogether, these data will be used to develop predictive models of heterosis and complement the growing genomic resources available for the improvement of shrub willow bioenergy crops.

09 BIOMASS FUELS↗

Evaluation of China’s Environmental Pressures Based on Satellite NO 2 Observation and the Extended STIRPAT Model

China’s rapid urbanization and industrialization have affected the spatiotemporal patterns of nitrogen dioxide (NO 2 ) pollution, which has caused greater environmental pressures. In order to mitigate the environmental pressures because of NO 2 pollution, it is of vital importance to investigate the influencing factors. We first obtained data for NO 2 pollution at the city level using satellite observation techniques and analyzed its spatial distribution. Next, we introduced a theoretical framework, an extended stochastic impacts by regression on population, affluence, and technology (STIRPAT) model, to quantify the relationship between NO 2 pollution and its contributing natural and socio-economic factors. The results are as follows. Cities with high NO 2 pollution are mainly concentrated in the North China Plain. On the contrary, southwestern cities are characterized by low NO 2 pollution. In addition, we find that population, per capita gross domestic product, the share of the secondary industry, ambient air pressures, total nighttime light data, and urban road area have a positive impact on NO 2 pollution. In contrast, increases in the normalized difference vegetation index (NDVI), relative humidity, temperature, and wind speed may reduce NO 2 pollution. These empirical results should help the government to effectively and efficiently implement further emission reductions and energy saving policies in Chinese cities in a bid to mitigate the environmental pressures.

54 ENVIRONMENTAL SCIENCES↗

The Influence of Three-dimensional Stochastic Magnetic Boundaries on Plasma Edge Transport and the Resulting Plasma Wall Interaction

The three-dimensional (3D) features of plasma edge profiles and wall interaction patterns induced by edge resonant magnetic perturbation fields (RMP) are discussed comparing TEXTOR and DIII-D. We show that the scrape-off layer (SOL) profiles and decay lengths depend the edge safety factor, the RMP base mode as well as on the plasma rotation during RMP application indicating modification of SOL transport by the 3D perturbation fields. This is compatible with channeling of particle and heat efflux along open perturbed field lines in the very edge of the plasma boundary into a completely re-arranged, helically striated 3D divertor footprint. The distribution of the measured divertor heat and particle fluxes at DIII-D match the vacuum modeled magnetic footprint topology in L-mode while in H-mode the striation width exceeds the modeled footprint width by 15-30%. This 3D structure of the measured heat and particle fluxes results in a new situation for the material erosion properties and initial quantification of the net-erosion within the 3D footprint shows in L-mode a 50% decrease of the chemical erosion yield and evidence for a comparably small 15-20% increase in physical sputtering. Extrapolation of these findings to ITER by vacuum modeling of the magnetic footprint for the actual ELM control coils shows a similar vacuum magnetic footprint topology as found at DIII-D during RMP ELM suppression. However, the open field lines escape the CFC covered ITER divertor area potentially transferring net-erosion characteristics from the CFC domain onto the Tungsten including so far unconsidered heat and particle loads on this sensitive material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heat flux modeling using ion drift effects in DIII-D H-mode plasmas with resonant magnetic perturbations

The heat flux patterns measured in low-collisionality DIII-D H-mode plasmas strongly deviate from simultaneously measured CII emission patterns, used as indicator of particle flux, during applied resonant magnetic perturbations. While the CII emission clearly shows typical striations, which are similar to magnetic footprint patterns obtained from vacuum field line tracing, the heat flux is usually dominated by one large peak at the strike point position. The vacuum approximation, which only considers applied magnetic fields and neglects plasma response and plasma effects, cannot explain the shape of the observed heat flux pattern. One possible explanation is the effect of particle drifts. This is included in the field line equations and the results are discussed with reference to the measurement. Electrons and ions show different drift motions at thermal energy levels in a guiding center approximation. While electrons hardly deviate from the field lines, ions can drift several centimetres away from field line flux surfaces. A model is presented in which an ion heat flux, based on the ion drift motion from various kinetic energies as they contribute to a thermal Maxwellian distribution, is calculated. The simulated heat flux is directly compared to measurements with a varying edge safety factor q{sub 95}. This analysis provides evidence for the dominate effect of high-energy ions in carrying heat from the plasma inside the separatrix to the target. High-energy ions are deposited close to the unperturbed strike line, while low-energy ions can travel into the striated magnetic topology.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Simple Auxin Transcriptional Response System Regulates Multiple Morphogenetic Processes in the Liverwort Marchantia polymorpha

In land plants comparative genomics has revealed that members of basal lineages share a common set of transcription factors with the derived flowering plants, despite sharing few homologous structures. The plant hormone auxin has been implicated in many facets of development in both basal and derived lineages of land plants. We functionally characterized the auxin transcriptional response machinery in the liverwort Marchantia polymorpha, a member of the basal lineage of extant land plants. All components known from flowering plant systems are present in M. polymorpha, but they exist as single orthologs: a single MpTOPLESS (TPL) corepressor, a single MpTRANSPORT INHIBITOR RESPONSE 1 auxin receptor, single orthologs of each class of AUXIN RESPONSE FACTOR (ARF; MpARF1, MpARF2, MpARF3), and a single negative regulator AUXIN/INDOLE-3-ACETIC ACID (MpIAA). Phylogenetic analyses suggest this simple system is the ancestral condition for land plants. We experimentally demonstrate that these genes act in an auxin response pathway — chimeric fusions of the MpTPL corepressor with heterodimerization domains of MpARF1, MpARF2, or their negative regulator, MpIAA, generate auxin insensitive plants that lack the capacity to pattern and transition into mature stages of development. Our results indicate auxin mediated transcriptional regulation acts as a facilitator of branching, differentiation and growth, rather than acting to determine or specify tissues during the haploid stage of the M. polymorpha life cycle. We hypothesize that the ancestral role of auxin is to modulate a balance of differentiated and pluri- or totipotent cell states, whose fates are determined by interactions with combinations of unrelated transcription factors.

59 BASIC BIOLOGICAL SCIENCES↗

Tropical Decadal Variability and the Rate of Arctic Sea Ice Decrease

The trend for cold-season (November-December-January-February, NDJF) decreases in Arctic sea ice extent from 2000 to 2014 was about a factor of two larger than the 1979–2000 trend, and the warm-season (June-July-August-September, JJAS) trend was about a factor of three larger. Sensitivity experiments with an atmospheric model show that a negative convective heating anomaly in the tropical Pacific, associated with the negative Interdecadal Pacific Oscillation phase after 2000, produces an atmospheric teleconnection pattern over the Arctic comparable to the observations in NDJF but not JJAS. A positive convective heating anomaly over the tropical Atlantic, associated with warming sea surface temperatures there in the 2000–2014 period, produces a teleconnection pattern over the Arctic comparable to the observations in JJAS but not NDJF. Thus, we surmise the observed anomalously strong Arctic surface winds and sea ice drifts after 2000, which produced accelerated decreases in sea ice extent, likely had contributions from decadal-time scale variability in the tropical Pacific and Atlantic.

58 GEOSCIENCES↗

Harnessing Satellite Data Alone for Mapping Global Thermal Anisotropy

Mapping thermal anisotropy across global lands is critical for advancing a wide range of Earth science studies. However, a comprehensive understanding of global thermal anisotropy intensity (TAI) and its governing factors remains missing. We introduce a novel data-driven methodology to quantify global TAI exclusively using multi-angle MODIS land surface temperature time series observations. Our analysis reveals distinct seasonal and diurnal TAI patterns, with global mean summertime TAI exceeding 2.9°C. Furthermore, we identify strong associations between TAI and key surface and atmospheric parameters, such as leaf area index and downward shortwave radiation. Our findings advocate for a paradigm shift from model-based to data-driven approaches in correcting thermal anisotropy, thereby addressing a critical bottleneck in Earth observation.

54 ENVIRONMENTAL SCIENCES↗

Evolutionary determination of experimental parameters for ptychographical imaging

The Ptychographical Iterative Engine (PIE) algorithm is a recently developed novel method of Coherent Diffractive Imaging (CDI) that uses multiple overlapping diffraction patterns to reconstruct an image. This method has successfully produced high quality reconstructions at both optical and X-ray wavelengths but the need for accurate knowledge of the probe positions is currently a limiting factor in the production of high resolution reconstructions at electron wavelengths. This paper examines the shape of the search landscape for producing optimal image reconstructions in the specific case of electron microscopy and then shows how evolutionary search methods can be used to reliably determine experimental parameters in the electron microscopy case (such as the spherical aberration in the probe and the probe positions).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct drive implosion experiments on SGIII prototype laser facility: Assessing energy coupling efficiency and implosion symmetry

Direct drive implosion experiments were conducted on SGIII prototype laser facility. From the time resolved x-ray images, the bright ring and the central bright spot are observed. The radial velocity of the convergent bright ring indicates the shell velocity, and the times when the central bright spot is first seen and becomes most intensive indicate the times of shock convergence and later stagnation, respectively. Radiation hydrodynamic simulations were carried out by changing laser energy deposition factors. When the simulated results are brought close to the measured ones, it is found that the energy coupling efficiency is around 70%. The implosion symmetry is indicated by the core x-ray emission pattern which is pancake when viewing from the equator, and splits into several bright spots when viewing close to the pole. A simple model is developed to understand this asymmetry. It is speculated that the observed implosion asymmetry can be attributed to the laser arrangement which is originally designed for indirect drive experiments. Further improvements of energy coupling efficiency and implosion symmetry in future experiments can be achieved by optimizing target design and laser arrangement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GAMMA-RAY LIGHT CURVES FROM PULSAR MAGNETOSPHERES WITH FINITE CONDUCTIVITY

We investigate the shapes of {gamma}-ray pulsar light curves using three-dimensional pulsar magnetosphere models of finite conductivity. These models, covering the entire spectrum of solutions between vacuum and force-free magnetospheres, for the first time afford mapping the GeV emission of more realistic, dissipative pulsar magnetospheres. To this end we generate model light curves following two different approaches: (1) We employ the emission patterns of the slot and outer gap models in the field geometries of magnetospheres with different conductivity {sigma}. (2) We define realistic trajectories of radiating particles in magnetospheres of different {sigma} and compute their Lorentz factor under the influence of magnetospheric electric fields and curvature radiation-reaction; with these at hand we then calculate the emitted radiation intensity. The light curves resulting from these prescriptions are quite sensitive to the value of {sigma}, especially in the second approach. While still not self-consistent, these results are a step forward in understanding the physics of pulsar {gamma}-radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Anatomical noise in contrast-enhanced digital mammography. Part I. Single-energy imaging

Purpose: The use of an intravenously injected iodinated contrast agent could help increase the sensitivity of digital mammography by adding information on tumor angiogenesis. Two approaches have been made for clinical implementation of contrast-enhanced digital mammography (CEDM), namely, single-energy (SE) and dual-energy (DE) imaging. In each technique, pairs of mammograms are acquired, which are then subtracted with the intent to cancel the appearance of healthy breast tissue to permit sensitive detection and specific characterization of lesions. Patterns of contrast agent uptake in the healthy parenchyma, and uncanceled signal from background tissue create a 'clutter' that can mask or mimic an enhancing lesion. This type of 'anatomical noise' is often the limiting factor in lesion detection tasks, and thus, noise quantification may be useful for cascaded systems analysis of CEDM and for phantom development. In this work, the authors characterize the anatomical noise in CEDM clinical images and the authors evaluate the influence of the x-ray energy used for acquisition, the presence of iodine in the breast, and the timing of imaging postcontrast administration on anatomical noise. The results are presented in a two-part report, with SE CEDM described here, and DE CEDM in Part II. Methods: A power law is used to model anatomical noise in CEDM images. The exponent, {beta}, which describes the anatomical structure, and the constant {alpha}, which represents the magnitude of the noise, are determined from Wiener spectra (WS) measurements on images. A total of 42 SE CEDM cases from two previous clinical pilot studies are assessed. The parameters {alpha} and {beta} are measured both from unprocessed images and from subtracted images. Results: Consistent results were found between the two SE CEDM pilot studies, where a significant decrease in {beta} from a value of approximately 3.1 in the unprocessed images to between about 1.1 and 1.8 in the subtracted images was observed. Increasing the x-ray energy from that used in conventional DM to those of typical SE CEDM spectra with mean energies above 33 keV significantly decreased {alpha} by about a factor of 19, in agreement with theory. Compared to precontrast images, in the unprocessed postcontrast images at 30 s postinjection, {alpha} was larger by about 7.4 Multiplication-Sign 10{sup -7} mm{sup 2} and {beta} was decreased by 0.2. While {alpha} did not vary significantly with the time after contrast administration, {beta} from the unprocessed image WS increased linearly, and {beta} from subtracted image WS increased with an initial quadratic relationship that plateaued by about 5 min postinjection. Conclusions: The presence of an iodinated contrast agent in the breast produced small, but significant changes in the power law parameters of unprocessed CEDM images compared to the precontrast images. Image subtraction in SE CEDM significantly reduced anatomical noise compared to conventional DM, with a reduction in both {alpha} and {beta} by about a factor of 2. The data presented here, and in Part II of this work, will be useful for modeling of CEDM backgrounds, for systems characterization and for lesion detectability experiments using models that account for anatomical noise.

60 APPLIED LIFE SCIENCES↗