Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PWR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

M3FT-16OR0203052-Test Design for FeCrAl Alloy Tube Irradiation in HFIR

This calculation summarizes thermal analyses of a flexible rabbit design for irradiating a variety of pressurized water reactor (PWR) cladding materials (stainless steel, iron-chromium aluminum [FeCrAl], Zircaloy, and Inconel) with variable dimensions at a temperature of 350 °C in the flux trap of the High Flux Isotope Reactor (HFIR). The design can accommodate standard cladding for outer diameters (ODs) of approximately 9.50 mm with thickness ranging from 0.30 mm to 0.70 mm. The length is generally between 10 and 50 mm. The specimens contain moly inserts with a variable OD that provides the heat flux necessary to achieve the design temperature with such a small fixed gas gap. The primary outer containment is an Al-6061 housing with a slightly enlarged inner diameter (ID) of 9.60 mm. The specimen temperature is controlled by determining a helium/argon gas mixture specific to the as-built specimen and housing. Variables that affect the required gas mixture are the cladding material (thermal expansion, density, heat generation rate), cladding OD, housing ID, and cladding ID. This calculation documents the analyses performed to determine required gas mixtures for a variety of scenarios.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Verification of bubble tracking method and DNS examinations of single- and two-phase turbulent channel flows

Direct numerical simulation (DNS) has been regarded as a reliable data source for the development and validation of turbulence models along with experiments. The realization of DNS usually involves a very fine mesh that should be able to resolve all relevant turbulence scales down to Kolmogorov scale [1]. As the most computationally expensive approach compared to other CFD techniques, DNS applications used to be limited to flow studies at very low Reynolds numbers. Thanks to the tremendous growth of computing power over the past decades, the simulation capability of DNS has now started overlapping with some of the most challenging engineering problems. One of those examples in nuclear engineering is the turbulent coolant flow inside reactor cores. Coupled with interface tracking methods (ITM), the simulation capability of DNS can be extended to more complicated two-phase flow regimes. Departure from nucleate boiling (DNB) is the limiting critical heat flux phenomena for the majority of accidents that are postulated to occur in pressurized water reactors (PWR) [2]. As one of the major modeling and simulation (M&S) challenges pursued by CASL, the prediction capability is being developed for the onset of DNB utilizing multiphase-CFD (M-CFD) approach. DNS (coupled with ITM) can be employed to provide closure law information for the multiphase flow modeling at CFD scale. In the presented work, research groups at NCSU and UND will focus on applying different ITM to different geometries. Higher void fraction flow analysis at reactor prototypical conditions will be performed, and novel analysis methods will be developed, implemented and verified for the challenging flow conditions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Review of Bison Usage in VERA

Bison is being used in VERA in a variety of ways; this milestone will document an independent review of the current usage of Bison and provide guidance that will improve the accuracy, performance, and consistency in the ways that Bison is used. This task will entail running a suite of small, single and multi-cycle problems with VERA-CS, followed by Bison, and Tiamat (inline) and evaluating the usage. It will also entail performing several detailed ramp to full power solutions to compare the one-way coupled solver with the fully-coupled Tiamat. This will include at least one iteration with the PHI team to incorporate some of the feedback and improve the usage. This work will also be completed in conjunction with an FMC task to evaluate the ability of Bison to model load-follow in a PWR

97 MATHEMATICS AND COMPUTING↗

SiC Composite for Fuel Structure Applications

Extensive evaluation was performed to determine the suitability of using SiC composite as a boiling water reactor (BWR) fuel channel material. A thin walled SiC composite box, 10 cm in dimension by approximately 1.5 mm wall thickness was fabricated using chemical vapor deposition (CVD) for testing. Mechanical test results and performance evaluations indicate the material could meet BWR channel mechanical design requirement. However, large mass loss of up to 21% was measured in in-pile corrosion test under BWR-like conditions in under 3 months of irradiation. A fresh sister sample irradiated in a follow-up cycle under PWR conditions showed no measureable weight loss and thus supports the hypothesis that the oxidizing condition of the BWR-like coolant chemistry was responsible for the high corrosion rate. A thermodynamic evaluation showed SiC is not stable and the material may oxidize to form SiO 2 and CO 2 . Silica has demonstrated stability in high temperature steam environment and form a protective oxide layer under severe accident conditions. However, it does not form a protective layer in water under normal BWR operational conditions due to its high solubility. Corrosion product stabilization by modifying the SiC CVD surface is an approach evaluated in this study to mitigate the high corrosion rate. Titanium and zirconium have been selected as stabilizing elements since both TiSiO 4 and ZrSiO 4 are insoluble in water. Corrosion test results in oxygenated water autoclave indicate TiSiO4 does not form a protective layer. However, zirconium doped test samples appear to form a stable continuous layer of ZrSiO 4 during the corrosion process. Additional process development is needed to produce a good ZrSiC coating to verify functionality of the mitigation concept.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of CASL boiling model for DNB performance in full scale 5x5 fuel bundle with spacer grids

As one of main tasks for FY17 CASL-THM activity, Evaluation study on applicability of the CASL baseline boiling model for 5x5 DNB application is conducted and the predictive capability of the DNB analysis is reported here. While the baseline CASL-boiling model (GEN- 1A) approach has been successfully implemented and validated with a single pipe application in the previous year’s task, the extended DNB validation for realistic sub-channels with detailed spacer grid configurations are tasked in FY17. The focus area of the current study is to demonstrate the robustness and feasibility of the CASL baseline boiling model for DNB performance in a full 5x5 fuel bundle application. A quantitative evaluation of the DNB predictive capability is performed by comparing with corresponding experimental measurements (i.e. reference for the model validation). The reference data are provided from the Westinghouse Electricity Company (WEC). Two different grid configurations tested here include Non-Mixing Vane Grid (NMVG), and Mixing Vane Grid (MVG). Thorough validation studies with two sub-channel configurations are performed at a wide range of realistic PWR operational conditions.

42 ENGINEERING↗

Power Take-off System for Marine Renewable Devices

The Power Take-off (PTO) System for Marine Renewable Devices (Project) envisioned the design, manufacture and testing of a generator that would ultimately be suitable for fully flooded seawater operation. This would require a generator design and bearing system capable of operating in the presence of seawater without corrosion. The original generator concept design focused on a switched reluctance electromagnetic design for the generator with the understanding that the switched reluctance design would be more robust and tolerant of a seawater medium. A trade study was conducted to prove that hypothesis, but the results of the study indicated that there was no benefit to adopting a switched reluctance design over a more conventional synchronous permanent magnet design. In addition, the novelty of the switched reluctance design added more technical risk to the Project than was warranted. ORPC’s cost of energy analyses pointed to reliability as being the most critical factor for achieving Project systems performance advancement (SPA) metrics. Consequently, the choice of a permanent magnet (PM) machine design over a potentially less reliable switched reluctance design was necessary to achieve the Project results. As a result, ORPC determined that a PM design was a more appropriate design to achieve the Project goals and ORPC selected a highly qualified PM generator firm for the design, manufacture and factory testing of the generator. The factory acceptance test (FAT) of the generator took place on March 20-22, 2017 and all tests were successfully passed. Developing a design for a driveline as part of the PTO system required a full understanding of the loads and operating conditions expected. Detailed analyses for developing turbine loads and subsequent definition of bearing specifications were performed using various analytical methods. Two candidate bearing designs were proposed as part of the Project. After initial design work had been completed, ORPC designed a representative full-scale driveline to validate the detailed design of the advanced driveline components. Full-scale components were manufactured, instrumented and tested, simulating actual system parameters. This full-scale bearing test was conducted at the University of Maine Advanced Structures and Composites Laboratory. The purpose of this test was to characterize the frictional losses associated with bearings and test the suitability and functionality of some commercially available shaft couplings and expansion bushings in cross-flow turbine drivelines. In parallel with component testing and dynamometer testing of the PTO system, ORPC performed design work to demonstrate how the advanced PTO system will be integrated with all ORPC turbine generator units (TGUs). The work would focus primarily on the TidGen® TGU and assess how the advanced PTO would be integrated into TidGen® 001 or other units, then field-deployed and tested in an open water environment under actual operational conditions. In addition to the benefits provided to the MHK industry in general, and ORPC in particular, the Project provided benefits to the general public, including the following: • Increased general awareness of the potential for generation of electricity from ocean energy resources • Demonstrated continuing advancements in the commercialization of MHK technologies, making them more likely to contribute to the electricity generation supply in America in the coming years • Continued awareness of the local economic benefits from the MHK industry through job creation and local spending • Confirmation of a path to improvements in availability, power-to-weight ratio (PWR) and reduction in levelized cost of energy (LCOE). All Project tasks were completed, and the Project objectives were accomplished. All project milestones and deliverables were met. The designs, methodologies, practices, testing, data, analysis and lessons learned from the Project are a step forward in the development of the U.S. MHK industry and provide a sound basis for ultimate commercialization of ORPC’s power systems. Based on the what was learned and demonstrated during the Project, ORPC has determined that the ORPC power systems have the potential of accelerating the commercialization of tidal and ocean current MHK power systems.

16 TIDAL AND WAVE POWER↗

Tritium Mitigation/Control for Advanced Reactor System

A tritium removal facility, which is similar to the design used for tritium recovery in fusion reactors, is proposed in this study for fluoride-salt-cooled high-temperature reactors (FHRs) to result in a two-loop FHR design with the elimination of an intermediate loop. Using this approach, an economic benefit can potentially be obtained by removing the intermediate loop, while the safety concern of tritium release can be mitigated. In addition, an intermediate heat exchanger (IHX) that can yield a similar tritium permeation rate to the production rate of 1.9 Ci/day in a 1,000 MWe PWR needs to be designed to prevent the residual tritium that is not captured in the tritium removal system from escaping into the power cycle and ultimately the environment. The main focus of this study is to aid the mitigation of tritium permeation issue from the FHR primary side to significantly reduce the concentration of tritium in the secondary side and the process heat application side (if applicable). The goal of the research is to propose a baseline FHR system without the intermediate loop. The specific objectives to accomplish the goals are: To estimate tritium permeation behavior in FHRs; To design a tritium removal system for FHRs; To meet the same tritium permeation level in FHRs as the tritium production rate of 1.9 Ci/day in 1,000 MWe PWRs; To demonstrate economic benefits of the proposed FHR system via comparing with the three-loop FHR system. The objectives were accomplished by designing tritium removal facilities, developing a tritium analysis code, and conducting an economic analysis. In the fusion reactor community, tritium extraction has been widely investigated and researched. Borrowing the experiences from the fusion reactor community, a tritium control and mitigation system was proposed. Based on mass transport theories, a tritium analysis code was developed, and the tritium behaviors were analyzed using the developed code. Tritium removal facilities were designed and laboratory-scale experiments were proposed for the validation of the proposed tritium removal facilities.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A status review on DNB prediction using CASL baseline boiling model and possible suggestions regarding wall boiling closures

The main goal of FY18 THM’s focus task is to evaluate where the current CASL boiling model stands for DNB predictive performance, to identify which components should be improved or calibrated to enhance DNB performance. Over the past three year’s validation tests, Gen1A boiling model has presented an under-predictive behavior for DNB at the high pressure of interest for PWR application. With this in mind, this year’s task is to focus on 1) best practice guidelines on DNB detection criteria, 2) interfacial momentum transfer closure tests, and 3) wall boiling closure sensitivity on DNB. Best practice guidelines on DNB detection criteria are demonstrated by the following three monitoring variables: 1) max wall temperature, 2) K-value and 3) energy balance. Interfacial momentum transfer closure govern the bubble distribution, especially in lateral direction, as well as bubble mean diameter. A clear correlation between interfacial momentum closure and DNB prediction is not observed in the current tests. However, void distributions are changed with different interfacial momentum closure tests which requires further validation with corresponding experimental measurement. From a variety of wall boiling closure tests, bubble departure diameter seems the most sensitive for DNB performance while fulfilling numerical robustness in DNB simulation. Tolubinski’s bubble departure diameter model was calibrated to see if any improvement is observed in DNB performance. Notable DNB improvement was observed as the bubble departure diameter is reduced. However, reduced bubble departure diameter by calibrated Tolubinski’s model seemed to lead to relatively high wall superheat temperature prediction which requires further validation with associated experimental measurement It should be noted that lack of experimental measurement close to DNB condition hampers this boiling closure sensitivity study significantly. This situation directly reflects some of limitations of the CASL boiling model development. With this in mind, the implementation of improved boiling closure on 5x5 NMVG and MVG tests will be pursued in FY19, the associated DNB best practice guidelines and possible limitations will be addressed for industry DNB application.

42 ENGINEERING↗

Development of a RIA Experimental Benchmark for BISON

This milestone report documents FY-17 efforts for the Reactivity Initiated Accident (RIA) Challenge Problem to demonstrate PWR RIA Fuel Performance capability. The challenge problem implementation plan identified a series of experimental comparisons to validate RIA capability in BISON. The specific cases chosen for FY-17 are CABRI REP Na-2, 3, 5, and 10. Work was also performed on the Nuclear Safety Research Reactor (NSRR) FK-1, 2, 3, 4, 5, 6, 7, 8, and 9 cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In-Pile Fuel Rod Deformation Measurements Using Miniaturized LVDT Technology

Different types of materials are being considered for fuel, cladding, and structures in existing and advanced nuclear reactors. These materials can undergo significant dimensional changes during irradiation. Currently in the US, such changes are measured with the ‘cook and look’ method (i.e. repeatedly irradiating a specimen for a specified period of time, and then removing it from the reactor for evaluation) – which leads to costly and time consuming experiments. In addition, such techniques provide limited data, and handling may disturb the phenomena of interest. Therefore, in-pile detection of geometric changes is needed to understand real-time behavior during irradiation testing of fuels and materials in high flux US Material and Test Reactors (MTRs). The developmental results of an advanced Linear Variable Differential Transformer (LVDT)-based test rig capable of detecting real-time changes in diameter or length of fuel rods or other material samples during irradiation in US MTRs are presented. The LVDT is being developed at the Idaho National Laboratory (INL), and will provide experimenters with the capability to measure dimensional changes associated with fuel and clad swelling, pellet-clad interaction, and crud buildup. The LVDT design utilizes the MTR’s loop pressure to drive the test specimen at a constant rate. This leads to a simplified construction which only requires three pressure boundary penetrations. Further, the LVDT pressure boundary is a leak tight hydraulic ram capable of actuating under low differential pressure (e.g. 1 psid), and is able to survive the high irradiation tests at Pressurized Water Reactor (PWR) conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermo-mechanical Analysis of SiC/SiC Composite Cladding with BISON including Fuel Creep

This report presents the results of a parametric thermo-mechanical parametric analysis of SiC/SiC cladding performed using the BISON fuel performance code. In this analysis different steady state linear heat rates (LHR) (18kW/m, 22kW/m, 26kW/m and 30kW/m) and initial fuel rod-gap thicknesses (50μm, 65μm, 80μm and 95μm) were considered along with three different model implementation of fuel creep. These include 1) no fuel creep 2) fuel creep based on the Hagrman model and 3) fuel creep based on a modified model. The fuel rod geometries used in this analysis are representative of a generic 17 x 17 fuel rod assembly used in a Westinghouse PWR.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Completion of a Chlorination Test Using 250 grams of High-Burnup Used Fuel Cladding from a North Anna Pressurized Water Reactor

A second large -scale chlorination test was completed in February 2017 by chlorinating 250 g of used nuclear fuel (UNF) cladding from a North Anna pressurized water reactor (PWR). Analytical results and a Zr mass balance from this test are described and compared with previous results obtained by the Zirconium Recovery and Recycle Project.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Consistent Fluid Property Evaluation in RELAP5-3D

Previous investigations have developed and tested a methodology to improve the consistency between used to determine the fluid property derivatives used in the numerical solution scheme and the solution scheme itself. Within a bounding rectangle of the fluid property table for a fluid state point, linear interpolants for both fluid property values and their derivatives are calculated. A weighted average between these interpolants the analytical approximations of the fluid properties and derivatives is formed with a weighting factor between 0.0 and 1.0. This average has shown potential to reduce mass error relating to the fluid properties in RELAP5-3D. This linear interpolation and weighted averaging methodology has been implemented in RELAP5-3D with two additional options that adjust the weighting factor in the average according to the location within the bounding rectangle. The first calculates the weighting factor based only on the position between the left and right internal energy endpoints. The second also factors the position between the upper and lower pressure grid points into the calculation of the weighting factor. The new coding passes verification testing and expanded testing of the various options. Graphs are presented from three kinds of test cases, a two volume basic model, Edward’s O’Brien blowdown, and typical PWR. Some trends of the effect of crossing fluid property table pressure and internal energy grid line are identified and discussed for the simple and Edwards test cases. Preliminary results show that it the consistent fluid methodology can reduce mass error in simple cases, but in more complex input models, there is no clear best.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of Model-Based Schemes for Accelerating Optimization by RAVEN

Nuclear-Renewable Hybrid Energy Systems (N-R HES) combine different energy technologies in a synergistic way with the objective of achieving a more economical energy production. In this report the particular hybrid system dealt with includes a PWR nuclear reactor, the associated Rankine-based energy conversion cycle (Balance of Plant, BOP), an Industrial Process (IP) for hydrogen production, a gas turbine (Second Energy Source, SES), and a battery (Energy Storage, ES). The RAVEN-based HYBRID framework is used to find the optimal installed capacity and the optimal economical dispatch of each component of the N-R HES. HYBRID solves the coupled capacity planning-economic and dispatch optimization problem with the objective of minimizing the Levelized Cost of Electricity (LCOE). In the optimization of the power dispatch strategy, the HYBRID framework takes into account the time-dependent dynamics of each subsystem by including a Dymola object-oriented model of the process dynamics. To ease the computational burden of the optimization process, an initial guess for the dispatch optimization problem is provided by a preconditioner. The solution guess is calculated by means of a least-marginal cost approach which applies the same criterion behind the screening curve method. Though this algorithm allows evaluating an economically adapted generation mix for a target load duration curve within a few seconds, it neglects the constraints due to the single component dynamics, and it is not able to adequately represent the ES. An improved treatment of the pre-conditioner problem was addressed by introducing a Monte Carlo based optimization algorithm. The new approach takes into account limits on power rates for the system subcomponents, which was not previously done. Additionally, this new Monte-Carlo based preconditioner addresses the problem with the ES component through improved modeling of that component. The new algorithm has been implemented in the HYBRID framework and tested to assess its performance. The results obtained with the new Monte Carlobased preconditioner were benchmarked against those obtained through the reference deterministic approach. The comparison shows that the Monte-Carlo based approach provides improved solution accuracy to the power dispatch optimization problem. Also in this report, the treatment of the penalty function on LCOE is discussed, and an improved penalty function for missed demand is suggested and tested.

Maronati, Giovanni↗

Experimental Determination and Modeling of Used Fuel Drying by Vacuum and Gas Circulation for Dry Cask Storage

More than 120 drying tests were conducted using a mock fuel assembly with depleted uranium rods and heater rods to simulate decay heat. These tests followed standard industry practice for vacuum and forced helium drying (FHD). Both single effect tests evaluating a single fuel assembly or cask feature and combined effect tests were conducted. Single effect tests evaluated drying of a specific, known amount of water in a feature. Combined effect tests evaluated specific features and followed the flooding of the chamber, dewatering, and blowdown procedures before beginning the drying procedure. Specific simulated fuel assembly and canister features evaluated included PWR dashpot, BWR water rod, failed fuel rod, spacer disc, and Boral sheet. Ceria pellets were fabricated and used in the failed fuel rod to avoid issues of uranium contamination. A method of monitoring water content in the canister gas and gas stream was developed using optical emission spectroscopy (OES) in addition to monitoring of relative humidity in the chamber and in the vacuum lines.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Validation of Gamma Dose Rate Calculation Methodology using the Morris and Turkey Point Measurements

The ability to accurately predict the dose rates from the spent nuclear fuel assembly is very important for determining whether the used nuclear fuel is self-guarded and self-protected. Studies have shown that the direct numerical calculations of the dose rates gave a much lower value than a typical reference. This report summarizes the benchmark studies performed to evaluate the numerical methodologies used in calculating the gamma dose rates of the spent nuclear fuel assemblies. The Morris and Turkey Point experimental data for dose rates measured through air were used in the analyses. Numerical simulations of the gamma dose rate measurements included the fuel depletion analysis of the fuel assembly as well as its structural materials irradiated inside the reactor core, the radioisotopes decay, and photon transport simulations to calculate the gamma dose rates. The different factors which affect the calculated gamma dose rates were addressed. The calculated results were compared with the measured gamma dose rates. Good agreement was obtained when the detectors were placed at the middle of the fuel assembly region. The deviations of the calculated dose rates became larger when the measurements were performed at the top or bottom fuel assemblies. In these benchmark studies, the spent nuclear fuel assemblies were all PWR assemblies and had fuel burnup around 25 MWd/kg to 40 MWd/kg. Its cooling time before the measurements was around 1.8 years to 7 years. The used nuclear fuel assembly is usually self-protected while discharged from the core. Its radioactivity decreases and after a few tens of years it may fall down below the current threshold of 100 r/h. Future validation work is necessary in order to better evaluate the numerically calculated gamma dose rates with experiments performed for other types of fuel assemblies and for fuel assemblies with higher burnup and/or longer cooling times.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of Accident Tolerant Fuel Options For Near Term Applications

In this section, the basis for the proposal followed by description of the work scope and methodologies are discussed. Following the Fukushima disaster in 2011, US congress mandated the department of energy to start a R&D program on accident tolerant fuel (ATF) concepts for the existing light water reactor fleet. By 2015, the start date of this IRP, several ATF concepts were being pursued by various entities. In general, the ATF concepts were divided into two categories: near term and long term. The near term concepts included: Coated Zircaloy clad, fuels with additives and dopants and FeCrAl/steel based claddings. The long term concepts included: SiC composite cladding, high density fuels (U 3 Si 2 , UN) and TRISO type fuel forms (e.g. FCM). It is of particular importance for any DOE funded effort to give background information and original Funding Opportunity Announcement (FOA) goals in its final report to evaluate whether the FOA goals and the proposed work were actually addressed. The FOA for this IRP sought for modeling and simulation capability to predict various ATF performances during normal operation, design basis accident and severe accident conditions. Particularly, the FOA was concern with the state of the core performance during a severe accident. It was postulated that if an ATF retains its structural integrity, the performance of non-fuel structures in the core needs to be addressed. The IRP team focused the proposal on Pressurized Water Reactor (PWR) performance for near term ATF concepts: Coated cladding, Fuel with additives and dopants to accelerate adoption of such concepts and address the unanswered questions regarding their performance. The project also gave limited focus on another near term concept, FeCrAl cladding, by restricting its scope to time-to-failure prediction since substantial effort supported by other programs including ORNL ATF program, GEH ATF program and NEAMS High Impact Problem were already made or underway during the IRP tenure. Despite two previous IRPs funded in 2012 with focus on experimental study of metallic and ceramic Zircaloy coated claddings, this IRP still included a coating program. This was a testament to the project leadership’s belief that the coated clad concept will be the primarily initial pathway for near term industrialization of ATF technology due to presence of enrichment penalty and licensing hurdles of the alternative clad concepts. In doing so, the IRP was positioned to provide key findings on coated Zircaloy as a uniquely funded external program to DOE’s industrial ATF campaign. Currently, in 2019, the coated clad concept is being pursued by all three vendors for licensed application and Lead Test Rods and Lead Test Assemblies (LTRs/LTAs) have already been inserted or planned to be inserted in the existing fleet. At the start of the IRP project, based on the meeting with the projects technical and federal point of contacts, it was also agreed upon if the contractual obligations are met, then the scope of the simulation work will be extended to Boiling Water Reactors as included in Section 2.10.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Computational and Experimental Benchmarking for Transient Fuel Testing

In 2018 the Transient Reactor Test (TREAT) Facility was restarted. This now-operational facility brings back world-class transient fuel testing capabilities to the U.S. Among a number of parallel efforts prior to the TREAT Facility’s restart a Department of Energy (DoE) Integrated Research Project (IRP) was funded for the purpose of benchmarking the TREAT with several goals in mind: To produce a comprehensive evaluation of existing TREAT Facility neutronics data using the next generation reactor core neutronics codes in accordance with established guidelines per the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP). To perform a benchmark using ready-use computational fluid dynamics tools against that of a historically collected sodium loop experiment collected in the TREAT. To design, develop and test a new experimental thermal hydraulic system of a representative TREAT Facility water flow loop. And benchmark the data collected against that produced via RELAP5-3D and TRACE. To develop a comprehensive instrumentation plan for the TREAT Facility by benchmarking performing of advanced in-pile instruments in the Massachusetts Institute of Technology Research Reactor (MITR) and the TREAT. The integrated team brought together collaborating members from three universities including Oregon State University (OSU), the University of Michigan (UM), and Massachusetts Institute of Technology (MIT); three national laboratories, Idaho National Laboratory, Argonne National Laboratory (ANL), and Oak Ridge National Laboratory (ORNL); and two industry partners, TerraPower (TP) and Harris Thermal Transfer Products (HTTP). A brief summary of accomplishments resulting from this IRP includes two filed patents, more than 40 conference papers, two published benchmark reports through IRPhEP, a new representative thermal hydraulic test facility alike the in-pile PWR water flow loop for TREAT and the first advanced instruments tested within the TREAT core upon its restart. The papers presented herein were developed and provide a summary of the significant technical accomplishments which align with the four project’s objectives. The collaborators has significant support from countless parties including the operational and technical staff at TREAT to ensure that their outcomes most impactfully aligned with program needs. Lastly the collaborators would like to acknowledge the fiscal support of the DoE’s Office of Nuclear Energy under work package identification number NU-15-OR-OSU- 0701-01. This report contains selected papers from the Computational and Experimental Benchmarking for Transient Fuel Testing Integrated Research Project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗