Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PAST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

An experimental investigation of the flow past a finite circular cylinder at a low subcritical Reynolds number

Results of hot wire measurements made in the near wake at a Reynolds number of 9955 are reported. The measurements include the mean velocity profiles, root mean square values of the velocity fluctuations, frequency spectra, and velocity cross correlations. The mean velocity profiles were used to determine the wake width, whose variation in the downstream and spanwise directions was examined. It is observed that close to the cylinder, the wake is narrower toward the free end than it is away from it, while further downstream the wake is wider toward the tip than it is away from it. It is found that the flow over the span can be characterized by four regions: a tip region where vortex shedding occurs at a lower frequency than that prevalent for away from the tip; an intermediate region adjacent to the first one where a frequency component of a nonshedding character is present; a third region characterized by a gradually increasing shedding frequency with increasing distance from the tip; and a two dimensional region where the shedding frequency is constant.

Budair, M.↗

Past applications and future potential of variable stability research helicopters

The historical development of variable-stability research helicopters and some of their previous applications are presented as a guide for assessing their future potential. The features of three general-purpose rotary-wing flight research aircraft that provide complementary capabilities are described briefly, and a number of future applications are proposed.

Hindson, W. S.↗

An experiment on the flow past a finite circular cylinder at high subcritical and supercritical Reynolds numbers

The complicated flow in the tip region of a finite circular cylinder in uniform cross flow has been examined at the Reynolds numbers 85,000, 180,000, and 770,000. Simultaneous measurements of the surface-pressure and wake-velocity fluctuations have revealed the existence of a shedding regime in the tip region that is distinct from the one prevailing on the main body of the cylinder. In particular, this regime can be unstable and intermittent, can have a cellular structure in the wake, or can be subcritical when the main flow is supercritical.

Ayoub, A.↗

Research on the adaptation of skeletal muscle to hypogravity Past and future directions

The results of previous research on the cellular effects of microgravity on rat tissue are reviewed and areas of future necessary research are identified. The rats were flown on board Cosmos 605, 782, and 936. Postflight tissue analyses revealed increases in connective tissue cells and focal disruption of muscle fibers due to the microgravity environment of space. Evidence has been found for muscular and neural changes occurring as a result of reentry stresses. It is suggested that a data base be established for quantizing muscle function with electromyography, measurements of force output, and length measurement. The data can serve as a reference for comparisons with data obtained in orbiting laboratories such as the Spacelab. The experiments will have a goal of defining and preventing the mechanism of neuromuscular atrophy.

Riley, D. A.↗

Finite analytic numerical solution of heat transfer and flow past a square channel cavity

A numerical solution of flow and heat transfer characteristics is obtained by the finite analytic method for a two dimensional laminar channel flow over a two-dimensional square cavity. The finite analytic method utilizes the local analytic solution in a small element of the problem region to form the algebraic equation relating an interior nodal value with its surrounding nodal values. Stable and rapidly converged solutions were obtained for Reynolds numbers ranging to 1000 and Prandtl number to 10. Streamfunction, vorticity and temperature profiles are solved. Local and mean Nusselt number are given. It is found that the separation streamlines between the cavity and channel flow are concave into the cavity at low Reynolds number and convex at high Reynolds number (Re greater than 100) and for square cavity the mean Nusselt number may be approximately correlated with Peclet number as Nu(m) = 0.365 Pe exp 0.2.

Chen, C.-J.↗

Viscous shock-layer predictions of three-dimensional nonequilibrium flows past the space shuttle at high angle of attack

Computational solutions were obtained for chemically reacting flowfields over the entire windward surface of the Space Shuttle at high angle of attack. The recently developed computational method for the Space Shuttle is capable of treating three dimensional viscous nonequilibrium air flow as well as equilibrium air and perfect gas flows. A general nonorthogonal computational grid system is used to treat the nonaxisymmetric geometry. Boundary conditions take into account noncatalytic wall, equilibrium with noncatalytic wall condition are compared to the fully catalytic wall solutions, the equilibrium air solutions, the perfect gas solutions, and also the Shuttle flight heating and pressure data. The comparisons show good agreement and correlations in most cases.

Kim, M. D.↗

Interacting boundary-layer solutions for laminar separated flow past airfoils

Numerical solutions of the interacting laminar boundary layer equations are presented for two symmetric airfoils at zero incidence: the NACA 0012 and the NACA 66 sub 3-108 airfoils. The potential flow was computed using Carlson's code, and viscous interaction was treated following a Hilbert integral scheme due to Veldman. Effects of various grid parameters are studied, and pressure and skin friction distributions are compared at several Reynolds numbers. For the NACA 0012 airfoil, Reynolds number is varied from a value just below separation (R sub N = 3000) to a value for which extensive separation occurs (R sub N = 100,000). For the 66 sub 3-018 airfoil, results are given at intermediate values (R sub N - 10,000 and 40,000). The method fails to converge for greater values of Reynolds number, corresponding to the development of very thin well separated shear layers where transition to turbulence would occur naturally.

Burggraf, O. R.↗

Cosmic ray exposure ages of iron meteorites, complex irradiation and the constancy of cosmic ray flux in the past

While previous calculations of potassium ages assumed a constant cosmic ray flux and a single stage (no change in size) exposure of iron meteorites, present calculations relaxed these constancy assumptions and the results reveal multistage irradiations for some 25% of the meteorites studied, implying multiple breakup in space. The distribution of exposure ages suggests several major collisions (based on chemical composition and structure), although the calibration of age scales is not yet complete. It is concluded that shielding-corrected (corrections which depend on size and position of sample) production rates are consistent for the age bracket of 300 to 900 years. These production rates differ in a systematic way from those calculated for present day fluxes of cosmic rays (such as obtained for the last few million years).

Marti, K.↗

V/STOL concepts in the United States: Past, present, and future

Nonhelicopter types of V/STOL aircraft developed in the United States are reviewed, and some lessons learned from a selected number of concepts are highlighted. The AV-8B, which was developed by modifications to the British Harrier is the only current concept examined. Configurations proposed for the future subsonic, multimissing aircraft and the future supersonic fighter/attack aircraft are described. Emphasis is on these supersonic concepts.

W P Nelms↗

Pressure filtration of ceramic pastes. 4: Treatment of experimental data

The use of data processing method based on the algorithm proposed by Kalman and its application to the filtration process at constant pressure are described, as well as the advantages of this method. This technique is compared to the least squares method. The operation allows the precise parameter adjustment of the equation in direct relationship to the specific resistance of the cake.

Torrecillas, A. S.↗

Supersonic separated flow past a cylindrical obstacle on a flat plate

An experimental investigation of three-dimensional boundary-layer separation on a flat plate ahead of a circular cylinder at Mach 2.36 was made. Emphasis was given to the laminar flow regime and to the flow region upstream of the cylinder. The heights and diameters of the cylinders used in the study were larger than the undisturbed boundary-layer thickness at the cylinder location. Data were obtained by oil flow visualization, Schlieren observations, static pressure measurements, and laser anemometry. Oil flow visualization revealed three separation lines on the flat plate ahead of the cylinder. A postulated flowfield structure, which was suggested by this skin-friction pattern, could not be confirmed by the velocity measurements. Velocity measurements indicated an unsteady flow structure.

Ozcan, O.↗

Deep space communication - Past, present, and future

This paper reviews the progress made in deep space communication from its beginnings until now, describes the development and applications of NASA's Deep Space Network, and indicates directions for the future. Limiting factors in deep space communication are examined using the upcoming Voyager encounter with Uranus, centered on the downlink telemetry from spacecraft to earth, as an example. A link calculation for Voyager at Uranus over Australia is exhibited. Seven basic deep space communication functions are discussed, and technical aspects of spacecraft communication equipment, ground antennas, and ground electronics and processing are considered.

Posner, E. C.↗

Past developments and the future of nickel electrode cell technology

The nickel hydroxide electrode has evolved over nearly 100 years from the pocket electrode structure through to the present design of a light weight, porous, plaque structure. Before discussing the historical aspects, it would be helpful to point out that there are basically two parts to the electrode: the active material and the current (electron) collector. Together they provide the essential properties for storing and converting the chemical energy into electrical energy and vice versa. The electrical energy is stored in the nickel hydroxide active material during charge, in which the electrode is oxidized. The chemical energy is converted back to electrical energy during discharge. The active material is itself initially non-conductive. Therefore it must be housed in a high conductivity metallic structure which serves as the current collector. This is, in turn, connected to another high conductivity metallic structure called the terminal.

Halpert, G.↗