Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTIAL PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

CALPHAD modeling of uranium nitride (UN) fabrication routes enabled by first-principles calculations

The thermochemical details of fabricating uranium nitride (UN) by ammonolysis of uranium tetraflouride (UF 4 ) were determined using density functional theory (DFT) and CALculation of PHAse Diagrams (CALPHAD) computational methods. The thermochemical data of all binary, ternary, and quaternary U-H-N-F phases were computed using DFT, and the data for the phases that have not been measured experimentally, including UN 2 and NH 4 F(g), were combined with existing experimentally-determined data for CALPHAD modeling. The DFT data were benchmarked using experimental Gibbs energy of reaction and experimental thermochemical data for individual species. Phase diagrams relevant to the ammonolysis reaction are depicted, showing regions of stability for solid U-N, U-F and U-N-F phases. An unidentified phase produced in a previous experiment was identified as UN 0.95 F 1.2 (UNF) by comparing its X-ray diffraction spectrum to the experimental spectrum, and its formation during the fabrication of UN from UF 4 is supported by the simulated phase diagram. Here, it is calculated that UN 2 can be produced by the ammonolysis of UF 4 , but requires elevated temperatures, high NH 3 (g) partial pressure, and large amounts of flowing NH 3 (g) to avoid solid flu oride impurities in the uranium nitride. Likewise, U 2 N 3 can be produced instead at temperatures greater than 980 K. The use of silane (SiH 4 ) gas was investigated as a potential additive in the ammonolysis fabrication route to speed removal of fluorine. The addition of SiH 4 (g) offers little advantage to the removal of fluorine, and adds the complication of Si 3 N 4 formation. The use of DFT to fill in missing data to perform CALPHAD calculations demonstrated here allows for the determination of more comprehensive and trustworthy phase diagrams than the use of existing experimental data alone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bottom up synthesis of boron-doped graphene for stable intermediate temperature fuel cell electrodes

The high surface area and electrical conductivity of few-layered graphene would make it an ideal catalyst support and electrode in fuel cells apart from its susceptibility to oxidative corrosion. Here we report the single-step, bottom-up synthesis of oxidation-resistant boron-doped graphene and show its increased stability in the aggressive electrochemical environment of intermediate temperature solid acid fuel cells (SAFCs). Boron was shown to alter the growth mode of single walled carbon nanohorns by laser vaporization to produce high yields of thin (<20 layer) boron-doped (2–3 at.%) crystalline flakes of turbostratic graphene (B-GLF). Alternatively, adding partial pressures of hydrogen less effectively shifted the growth mode of SWCNHs toward planar, turbostratic graphene-like flakes (GLFs). Thermogravimetric analysis indicates that boron-doping enhances the oxidation resistance of few-layer GLFs by >140 °C, with large fractions of multilayered B-GLFs surviving 10 °C/min ramps to 1000 °C. These B-GLFs provided a stable Pt catalyst support and electrode over 40 h operation in SAFCs with cesium dihydrogen phosphate electrolyte operating at 250 °C, as opposed to undoped GLFs or SWCNHs which were nearly completely consumed. Furthermore, the facile synthesis and oxidation-resistant properties of boron-doped GLF appear promising for graphene applications in oxidizing environments.

25 ENERGY STORAGE↗

O 2 -Oxidation of Individual Graphite and Graphene Nanoparticles in the 1200 – 2200 K Range: Particle-to-Particle Variations and the Evolution of the Reaction Rates and Optical Properties

The kinetics for O 2 oxidation of individual graphite and graphene platelet nanoparticles (NPs) were studied as a function of temperature (1200 to 2200 K) at varying oxygen partial pressures, using a single nanoparticle mass spectrometry method. NP temperature (TNP) was measured by measuring the NP thermal emission spectra during the kinetics studies. The initial oxidation efficiency is found to peak in the 1200 to 1500 K range, dropping by an order of magnitude as TNP was increased above 2000 K. There were large NP-to-NP variations in the oxidation rates, attributed to variations in the NP surface structure. In addition, the oxidation efficiencies evolved, non-monotonically, as the NPs reacted, decreasing by factors of between 10 and 300. This evolution of reactivity is attributed to changes in the NP surface structure due to the combination of oxidation and annealing. In conclusion, the optical properties, including wavelength dependence of the emissivity and the absorption cross section for the 532 nm heating laser, also tended to evolve as the NPs oxidized, but differently for each individual NP, presumably reflecting differences in the initial structures and their evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular structure and catalytic promotional effect of Mn on supported Na 2 WO 4 /SiO 2 catalysts for oxidative coupling of methane (OCM) reaction

The structure and promotional effect of Mn in supported Mn-Na 2 WO 4 /SiO 2 catalysts for the oxidative coupling of methane (OCM) reaction has been debated for a longtime in the literature. In the current investigation, with the aid of multiple in-situ characterization studies, we show that the freshly calcined supported 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst possesses crystalline Na 2 WO 4 , Mn 2 O 3 and SiO 2 (cristobalite phase) along with surface MnO x and Na-WO x sites at low temperature and oxidizing environments. Under the OCM reaction environment (T>800°C), the crystalline Na 2 WO 4 phase melts and Mn 2 O 3 phase reduces. In contrast, the surface MnO x and Na-WO x sites exhibit excellent thermal and chemical stability. Exposure of the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst to the OCM reaction environment redisperses the molten Na 2 WO 4 phase on the SiO 2 support to form new surface WO x sites. Interestingly, the stable MnO x species interacts with both molten Na 2 WO 4 phase and surface Na-WO x sites during OCM reaction. Controlled transient kinetic experiments in TAP and detailed steady state OCM fixed-bed reaction studies reveal the role and promotional effect of Mn in the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst. The W-oxides (both molten Na 2 WO 4 and surface Na-WO x sites) are the active sites for the catalytic OCM reaction and the MnO x species only function as promoters. The promotion of MnO x strongly depends on the gas phase O 2 partial pressure and the MnO x species act as mediators for oxygen exchange between the gas phase molecular O 2 and catalyst lattice oxygen. In conclusion, the temperature dependent MnO x promotion reveals that the MnO x species selectively promote the molten Na 2 WO 4 phase at lower reaction temperature and the surface Na-WO x sites at higher temperature.

36 MATERIALS SCIENCE↗

Determining the kinetic rate constants of Fe 3 O 4 -to-Fe and FeO-to-Fe reduction by H 2

Steel production using coal accounts for ~ 8% of global carbon emissions. “Green Steel” is a new grand concept proposed recently to make steel from iron ores using renewable derived “Green Hydrogen” to achieve zero carbon emission. The kinetics and rate-limiting steps of iron ore reduction into iron with H 2 as a reducing agent is critically important to the success of this new technology. While reduction of Fe 2 O 3 into Fe by H 2 follows multiple steps, the past research on this topic mainly deals with the overall averaged kinetics, giving little information on the elemental and rate-limiting steps. In this work, we report a kinetic study specifically design to attain kinetic rate constants of one-step reduction of Fe 3 O 4 -to-Fe and FeO-to-Fe. Guided by thermodynamics, we show first how to create in situ the desirable starting oxide phases, i.e., Fe 3 O 4 and FeO, with precisely controlled the ratio of partial pressures of H 2 O and H 2 . We then show time-dependent raw H 2 O content data collected by a mass spectrometer and the processed reduction data to extract kinetic rate constants. We found that the kinetics of the two one-step reduction reactions follows nicely the Johnson-Mehl-Avrami (JMA) phase transformation model. The one-step reduction mechanisms and activation energy are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sorbent-based oxygen separation with YBC114 for energy storage systems

In our report we aimed to design, build, and evaluate an oxygen separation system to provide an inert sweep gas with low oxygen partial pressure (pO2) to redox-active thermochemical energy conversion reactors for a range of applications, including two-step redox cycles for thermochemical energy storage, water splitting, and carbon-dioxide splitting. The separation is based on an oxygen-selective sorbent, YBaCo4O7+δ (YBC114), which has excellent oxygen sorption and desorption properties demonstrated in our previous work. The oxygen separation performance of YBC114 was comprehensively studied by thermogravimetric analysis, sorption breakthrough experiments, and temperature swing sorption - desorption cycles. The results reveal that YBC114 can produce inert sweep gas with an oxygen concentration of less than 100 ppmv for at least 20 min during the thermal swing adsorption (TSA) cycle with the current sorption bed configuration, and the performance is consistent from cycle to cycle. The optimal sorption and desorption temperatures for the TSA process with YBC114 are determined to be 300 °C and 500 °C, respectively. Although challenges remain for the current separation system (e.g., high sorption temperature and slow kinetics), this study demonstrates the potential to use the oxygen-selective sorbent to produce an inert sweep gas, the feasibility of the oxygen separation concept, and guides new sorbent material development to make this application economically practical. A simple procedure is described for designing the YBC114 oxygen separation process.

42 ENGINEERING↗

Chemical affinity and pH effects on chlorite dissolution kinetics under geological CO 2 sequestration related conditions

The kinetic dissolution of Flagstaff Hill chlorite (CCa-2 from Clay Minerals Society), (Mg 4.55 Al 1.23 Fe 0.12 )(Al 1.04 Si 2.96 )O 10 (OH) 8 , was investigated using a well-mixed flow-through reactor at 100 °C, pH values ranging from 3.0 to 7.5, and variable saturation states. The objective was to measure the dependence of chlorite dissolution rate on pH as well as on degree of undersaturation under conditions applicable to geologic carbon storage. A batch experiment was conducted to determine the equilibrium constant of the dissolution reaction at 100 °C for the chlorite mineral phase used in this study. A series of experiments was run at varying CO 2 partial pressures (0–60 bars) and different flow rates (0.01–0.25 ml/min). Here, we use our experimental results in conjunction with previously published data to separate the effects of pH and solution saturation state. At constant pH, the chlorite dissolution rate decreases slowly as a function of the Gibbs free energy of reaction (ΔG r ), which is a quantitative measure of the degree of undersaturation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial growth mechanism of heterogeneous catalytic oxidation of Mn(II) on manganite under oxic conditions

Manganese oxides are ubiquitous in soils and sediments, and their formation and transformation processes affect the migration and transformation of heavy metals and organic pollutants. Most previous work has been focused the oxidation of Mn(II) on Mn(IV) oxide surface, but it remains poorly understood how Mn(II) interacts with manganite under oxic conditions. Here, the interactions between manganite and dissolved Mn(II) within pH 5.0–9.0 under oxic conditions were systematically studied. The results indicated that adsorbed Mn(II) was directly oxidized to manganite on the surface, and the oxidation rate increased with increasing pH and oxygen partial pressure. Electrons are likely transferred in bulk manganite during the oxidation process of Mn(II). Although manganite induced Mn(II) oxidation and the epitaxial growth of bulk particles, there was no obvious change in mineral phase. Dissolved oxygen accelerated the growth of manganite in Mn(II) solution. Compared with the absence of manganite, the presence of manganite inhibited the formation of hausmannite from Mn(II) oxidation by oxygen in air. Furthermore, this study reveals the catalytic oxidation process and mechanism of Mn(II) on manganite surface, and improves the understanding of manganite crystal growth in supergene environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulated production of OH, HO 2 , CH 2 O, and CO 2 during dilute fuel oxidation can predict 1st-stage ignition delays

Chemical kinetics simulations are used to explore whether detailed measurements of relevant chemical species during the oxidation of very dilute fuels (less than 1 Torr partial pressure) in a high-pressure plug flow reactor (PFR) can predict autoignition propensity. We find that for many fuels the timescale for the onset of spontaneous oxidation in dilute fuel/air mixtures in a simple PFR is similar to the 1st-stage ignition delay time (IDT) at stoichiometric engine-relevant conditions. For those fuels that deviate from this simple trend, the deviation is closely related to the peak rate of production of OH, HO 2 , CH 2 O, and CO 2 formed during oxidation. We use these insights to show that an accurate correlation between simulated profiles of these species in a PFR and 1st-stage IDT can be developed using convolutional neural networks. Our simulations suggest that the accuracy of such a correlation is 10–50%, which is appropriate for rapid fuel screening and may be sufficient for predictive fuel performance modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sputter-deposited WO x and MoO x for hole selective contacts

Here, reactive sputter deposited tungsten and molybdenum oxide (WO x , MoO x ) thin films are tested for their ability to form a hole selective contact for Si wafer based solar cells. A characterization approach based on analyzing the band bending induced in the c-Si absorber and the external and implied open-circuit voltage of test structures was used. It is shown that the oxygen partial pressure allows to tailor the selectivity to some extent and that a direct correlation between induced band bending and hole selectivity exists. Although the selectivity of the sputtered films is inferior to the reference films deposited by thermal evaporation, these results demonstrate a good starting point for further optimizations of sputtered WO x and MoO x towards higher work functions to improve the hole selectivity.

14 SOLAR ENERGY↗

Locally developed electronic conduction in a yttria stabilized zirconia (YSZ) electrolyte for durable solid oxide fuel cells

In the present work, anode supported solid oxide fuel cells (SOFCs) based on a YSZ single layer electrolyte with locally developed electronic conduction near the anode side is fabricated to improve the cell durability under negative voltage conditions. A ceria added Ni/YSZ anode functional layer is utilized and co-sintered with the YSZ electrolyte at 1460 °C. Cerium ions are diffused into a limited region of the YSZ layer (~6 μm), establishing a ceria doped YSZ region. We successfully demonstrate that this YSZ single layer cell can operate stably for ~100 h without anode/electrolyte interface delamination, even under a negative voltage. The embedded probe technique and theoretical calculation reveal that the internal oxygen partial pressure (near the anode) is substantially reduced (stabilized) by means of local electronic conduction of ceria doped YSZ. Thus, we propose an SOFC electrolyte design comprising a YSZ single layer with a ceria added anode functional layer (locally formed ceria doped YSZ in the electrolyte) as a protection method against fuel cell stack degradation caused by negative voltage operation.

25 ENERGY STORAGE↗

Experimental validation of solid oxide fuel cell polarization modeling: An LSM-YSZ/YSZ/Ni-YSZ case study

Polarization modeling based on the measured I-V curves is a useful tool for analyzing SOFC performance and diagnosing performance limitations. Using the polarization model, the overpotential of a cell is usually separated into different polarization contributions, including area specific ohmic polarization, activation polarization, and anodic and cathodic concentration polarizations. In this study, we aim to experimentally validate the accuracy of the polarization model. As a case study, anode-supported cells with LSM-YSZ/YSZ/Ni-YSZ configuration are used. By curve-fitting the I-V curves of a cell tested under different cathode oxygen partial pressures into the polarization model, the contributions of different polarization losses are quantified. To validate the polarization model, independent experiments/studies including electrochemical impedance spectroscopy, cathode kinetics study, ex-situ diffusivity measurement, and tortuosity measurement using 3D reconstructed anode are conducted. The results from polarization modeling and from validation studies are in good agreement, thereby validating the polarization model for SOFC performance analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic assessment of pulp mill-derived lime mud calcination in high CO 2 atmosphere

The chemical pulping of biomass involves the recycling of calcium through the calcination of lime mud, which is mostly comprised of calcium carbonate (CaCO 3 ). Lime mud decomposes under elevated temperatures to generate calcium oxide (CaO) and carbon dioxide (CO 2 ), the kinetics of which are strongly influenced by the CO 2 partial pressure and temperature. Oxy-fuel combustion and electrified lime kilns for lime mud calcination are intriguing methods to decarbonize this highly polluting operation within the biomass pulping industry. However, the high CO 2 concentration in oxy-fuel and electrified calcination processes alters the kinetics and overall reactivity of lime mud. For the first time, a model-fitting method is used to determine the kinetic parameters for lime mud calcination under a wide range of temperatures (550 °C–1250 °C) and under different concentrations of CO2 (0 %, 15 %, 50 %, and 90 %). A kinetic model is developed that accurately predicts the reaction rates as a function of temperature and CO 2 concentration. The apparent activation of energy for lime mud calcination is elevated under a high CO 2 environment. Relative to inert gas (N 2 , Ar), the temperature window for calcination is much smaller under high CO 2 environments. The presence of Na in lime mud does not seem to affect calcination under a high CO 2 environment. Finally, particle size variation does not have a significant effect on calcination under a high CO 2 environment.

09 BIOMASS FUELS↗

A simulation-based parametric study of CLOU chemical looping reactor performance

Chemical looping with oxygen uncoupling (CLOU) is a variant on chemical looping combustion in which the oxygen carrier releases gaseous O 2 in the fuel reactor, making it well-suited for solid fuels, since the released gaseous O 2 readily reacts with solid char. This work presents several computational fluid dynamic (CFD) simulations of copper-based CLOU in a dual fluidized bed system, each with different operating conditions. The modeling predicted that coal particle sizes as large as 1000 μm did not significantly affect performance. Increased oxygen carrier copper loading resulted in an excess of gaseous oxygen in the product gas stream. Decreasing the oxygen carrier bed mass as well as reducing the air reactor fluidizing velocity did not supply enough oxygen to the fuel reactor to complete combustion of the coal. This generated a failure state in which the temperature continued to decrease in the fuel reactor from the lack of combustion, which in turn reduced the O 2 equilibrium partial pressure, further lowering the amount of combustion possible. Sufficient O 2 can be maintained in the fuel reactor by ensuring a high enough air reactor velocity and a large enough supply of oxygen carrier inventory to handle the chosen coal feed rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent research and development for the dual-coolant blanket concept in the US

The dual-coolant lead-lithium, or DCLL, blanket concept is of strong interest in the US fusion technology program. In the DCLL blanket, the flow channel insert (FCI) is a critical component. FCIs must have low electrical and thermal conductivity and be compatible with lead-lithium eutectic alloy (Pb-17Li) at elevated temperatures. FCIs must retain structural integrity and desirable properties even under irradiation and large temperature gradients during operation. FCIs must not fail in such a way that Pb-17Li enters the FCI and changes its electrical or thermal conductivity significantly. Another important issue for the DCLL is the development of a suitable tritium extraction from the Pb-17Li to achieve low tritium partial pressure, thus facilitating decisive tritium control. In this paper, the state of DCLL development in the US is presented including recent design modifications and results from recent R&D efforts. Such R&D includes the progress on development and property quantification of SiC/SiC composites and SiC foams as candidate FCI materials; Pb-17Li material capability and infiltration studies; simulations of MHD Pb-17Li flow characteristics and of resultant temperature distributions; and the analysis of FCI stress states based on these thermal loads. In addition, tritium extraction from Pb-17Li based on a vacuum permeator concept is shown to have the potential to achieve the desired tritium control. A discussion of DCLL optimization and unresolved DCLL issues and future R&D needs is also presented.

Morley, Neil B↗

Local structural variation with oxygen fugacity in Fe 2 SiO 4+x fayalitic iron silicate melts

Here, the structure of molten Fe 2 SiO 4+x has been studied using both high-energy X-ray diffraction and Fe K-edge X-ray absorption near-edge structure (XANES) spectroscopy, combined with aerodynamic levitation and laser beam heating. A wide range of Fe 3+ contents were accessed by varying the levitation and atmospheric gas composition. Diffraction measurements were made in the temperature ( T ) and oxygen partial pressure ranges 1624(21) < T < 2183(94) K (uncertainties in parentheses) and –5.6(3) < ΔFMQ < +2.8(5) log units (relative to the Fayalite-Magnetite-Quartz buffer). Iron K-edge XANES measurements covered the ranges 1557(33) < T < 1994(36) K and –2.1(3) < ΔFMQ < +4.4(3) log units. Fe 3+ contents, x = Fe 3+ /ΣFe, estimated directly from the pre-edge peaks of the XANES spectra varied between 0.15(1) and 0.40(2). While these agree in some cases with semi-empirical models, notable discrepancies are discussed in the context of the redox kinetics and the limitations in both the models and in the calibrations used to derive oxidation state from XANES spectra. XANES pre-edge peak areas imply average Fe–O coordination numbers, n FeO , close to 5 for all Fe 3+ /ΣFe. Diffraction measurements yielded values of 4.4(2) < n FeO < 4.7(1). There is limited evidence for a linear trend n FeO (x) = 4.46(3) + 0.4(1)x. Asymmetric Fe–O bond length distributions peak at around 1.96 Å and have a shoulder arising from longer interatomic distances. Mean r FeO lie close to 2.06 Å, consistent with n FeO close to 5. These observations suggest that Fe 2+ is less efficient at stabilizing tetrahedral Fe 3+ compared to large monovalent alkali cations. Comparison of in-situ XANES estimates of Fe 3+ /ΣFe in the melts to those of the quenched solids obtained from XANES as well as Mössbauer spectroscopy indicate rapid oxidation during cooling, enabled by stirring of the melt by the levitation gas flow. As such, the oxidation state of hot komatiitic and other highly fluid melts may not be retained, even during rapid cooling, as it is for cooler basaltic and more silicic magmas.

58 GEOSCIENCES↗

Tolerance of allogromiid Foraminifera to severely elevated carbon dioxide concentrations: Implications to future ecosystem functioning and paleoceanographic interpretations

Increases in the partial pressure of carbon dioxide (pCO2) in the atmosphere will significantly affect a wide variety of terrestrial fauna and flora. Because of tight atmospheric oceanic coupling, shallow-water marine species are also expected to be affected by increases in atmospheric carbon dioxide concentrations. One proposed way to slow increases in atmospheric pCO2 is to sequester CO2 in the deep sea. Thus, over the next few centuries marine species will be exposed to changing seawater chemistry caused by ocean atmospheric exchange and/or deep-ocean sequestration. This initial case study on one allogromiid foraminiferal species (Allogromia laticollaris) was conducted to begin to ascertain the effect of elevated pCO2 on benthic Foraminifera, which are a major meiofaunal constituent of shallow- and deep-water marine communities. Cultures of this thecate foraminiferan protist were used for 10-14-day experiments. Experimental treatments were executed in an incubator that controlled CO2 (15000; 30 000; 60 000; 90 000; 200 000 ppm), temperature and humidity; atmospheric controls (i.e., ~375 ppm CO2) were executed simultaneously. Although the experimental elevated pCO2 values are far above foreseeable surface water pCO2, they were selected to represent the spectrum of conditions expected for the benthos if deep-sea CO2 sequestration becomes a reality. Survival was assessed in two independent ways: pseudopodial presence/absence and measurement of adenosine triphosphate (ATP), which is an indicator of cellular energy. Substantial proportions of A. laticollaris populations survived 200 000 ppm CO2 although the mean of the median [ATP] of survivors was statistically lower for this treatment than for that of atmospheric control specimens. After individuals that had been incubated in 200 000 ppm CO2 for 12 days were transferred to atmospheric conditions for ~24 h, the [ATP] of live specimens (survivors) approximated those of the comparable atmospheric control treatment. Incubation in 200 000 ppm CO2 also resulted in reproduction by some individuals. Results suggest that certain Foraminifera are able to tolerate deep-sea CO2 sequestration and perhaps thrive as a result of elevated pCO2 that is predicted for the next few centuries, in a high-pCO2 world. Thus, allogromiid foraminiferal blooms may result from climate change. Furthermore, because allogromiids consume a variety of prey, it is likely that they will be major players in ecosystem dynamics of future coastal sedimentary environments.

54 ENVIRONMENTAL SCIENCES↗