Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORNL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

VA-Environmental Determinants of Health’s Software Pipeline Framework

In order to characterize US communities in terms of social and environmental determinants of health (EDH) that affect veterans, the Social and Environmental Determinants of Health (SEDH) project, a collaboration between the Veterans Affairs (VA) Social Department and the Oak Ridge National Laboratory (ORNL), aims to identify, extract, and prepare datasets that include community variables known to be associated with health outcomes in veterans. The EDH project's responsibilities include investigating SEDH data, providing technical documentation for SEDH datasets, and automating the download, extraction, and preparation of the data through the creation of a software pipeline framework.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Photon-to-Digital Converters for Neutron Imaging Instruments (Final Report)

Oak Ridge National Laboratory (ORNL) collaborated with the Université de Sherbrooke (UdeS) to design a modular and scalable tile of innovative digital photodetectors called Photon-to-Digital Converters (PDC) and the required subsystems to demonstrate the feasibility of large area single-photon detectors to support high-resolution, depth-of-interaction, fast neutron radiography based on scintillation detectors. The goal is to demonstrate the advantages of using PDC over conventional Silicon Photomultiplier (SiPM) for neutron imaging systems. The basic building blocks of analog SiPM and PDC are Single-Photon Avalanche Photodiodes (SPAD). The main difference between conventional SiPMs and PDCs, is in the fact that analog SiPMs sum the charge produced by individual SPAD passively, while in PDCs each SPAD is read out individually by an active electronic circuit. Hence, PDCs provide a direct photon-to-bit conversion where a logic “1” means that there was a detection in a given SPAD. Conversely, an analog SiPM requires a sophisticated preamplifier (current amplifiers or transimpedance amplifier) followed by a shaping amplifier and an analog-to-digital converter. Moreover, since the charge from each SPAD varies slightly, the passive sum of the analog SiPM will have signal fluctuations for the same amount of photon detected. This is one of many issues that is completely eliminated by individual one-to-one SPAD read out in PDCs. The large area required for scintillator readouts for neutron imaging is such that the output capacitance of a large area of SiPM arrays is very high. This creates a burden on the signal-to-noise optimization with respect to the power budget. For PDC, the power consumption is dictated by rate of the incident photon flux, or in photon-starved environments, the dark noise rate of the SPAD array. In other words, the power consumption in the absence of events is extremely low. Hence, the power consumption of a PDC read out system is much lower than its analog counterpart. Further, the large SiPM capacitance may introduce signal distortions on the scintillator fast rise or decay time with undesired effects on timing and pulse shape discrimination. The problem is absent in PDCs, as their readout is independent on device capacitance. UdeS is the world leader in 3D vertical integration of frontside illuminated SPAD arrays over CMOS readouts. These capabilities allow future production of “3D PDC” with maximum photosensitive fill factor and electronic functionalities tailored to the application. UdeS' vast knowledge of SPADs and CMOS design made the team an ideal collaborator in the development of large area high-resolution fast neutron radiography.

42 ENGINEERING↗
DOE OSTI2023

Technologist in Residence for Advanced Manufacturing and Materials in Unconventional Oil and Gas Equipment and Infrastructure

The DOE Technologist in Residence (TIR) program pairs a senior technical staff member from a National Laboratory (Lab Technologist), and a senior technical staff member(s) from a clean energy manufacturing company or consortium of companies (Industry Technologist). Each technologist may represent single or multiple national laboratories, or single or multiple companies. These pairs of Lab and industry technologists work together for a period of 18 to 24 months to accomplish several goals: 1) Identify the participating company’s (or companies’) technical priorities and challenges, and the resources and capabilities in DOE’s National Laboratories that may be highly suitable to address them; 2) Propose collaborative R&D efforts to develop science-based solutions to the company’s (or companies’) most strategic scientific, technological, and business issues; and 3) Develop a general framework agreement and begin developing specific scopes of work for the proposed collaborative R&D efforts. The proposed R&D will then take place outside of the program and will not use TIR program funds. Oak Ridge National Laboratory (ORNL) and Pioneer Natural Resources were awarded a TIR project by DOE in late 2016 and the CRADA component of the project was initiated in 2017. This report describes work performed under the CRADA agreement between 2017 and 2020.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Development of process parameters and post-build conditions for qualification of LPBF 316 SS

To harness the potential of laser powder bed fusion (LPBF) 316H stainless steel (SS) for use in advanced nuclear reactors, extensive research efforts are needed to develop optimal laser processing parameters and appropriate heat treatments, taking into account various manufacturing platforms and locations. Furthermore, it is crucial to assess the material properties in environments relevant to reactor operating conditions. In collaboration with Oak Ridge National Laboratory (ORNL) and Los Alamos National Laboratory (LANL), Argonne National Laboratory (ANL) is dedicated to gaining insights into how the manufacturing process and post-build treatments impact the performance of LPBF 316H SS. This report provides an overview of ANL's research findings for FY23, focusing on LPBF 316H SS produced using a Renishaw AM400 laser system. Specifically, our research has concentrated on three key areas: 1) Optimum laser processing parameters: Leveraging the high-throughput printing technology, we systematically varied the laser power, exposure time and point distance within the same build. By measuring the as-printed porosity, we identified an optimum printing parameter window that produced materials with near-complete density; 2) Post-built treatment development: Materials printed with the optimum laser parameters underwent treatments including stress relief, solution annealing, and hot isostatic pressing. Subsequently, we fabricated tension, creep, and fatigue specimens from materials subjected to these different conditions. Over the next year, a series of scoping tests will be conducted to facilitate the selection of the most suitable post-build treatment condition; 3) Thermal aging effects on microstructure and properties: thermal aging at 550°C, 650°C and 750°C was conducted on LPBF 316H SS specimens up to 2500 h. Microstructural characterization was performed with electron microscopy, and the evolution of the dislocation cell structures and secondary phases was studied. Microhardness tests and tension tests were conducted to quantify changes in mechanical properties. The results revealed that the aged LPBF 316H SS exhibited a high density of Cr-rich and Mo-rich fine precipitates within grains due to the presence of a high density of dislocations and the globally distributed dislocation cell structures, which served as heterogeneous nucleation sites for secondary phases. Along grain boundaries, a Mo-Cr-rich phase, observed in 750°C-aged conditions, displayed significant thermal coarsening. Throughout the aging process, various mechanisms, including stress relaxation, dislocation cell structure recovery, solution hardening, and precipitation hardening, competed to influence materials strength. These results contribute towards establishing the technical basis for qualifying LPBF 316H SS for advanced nuclear reactor applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessment of Core Physics Characteristics of Extended Enrichment and Higher Burnup LWR Fuels using the Polaris/PARCS Two-Step Approach (Vol. 2: BWR Fuel)

Nuclear fuel vendors and utilities are currently investigating changes to fuel contents and fuel designs for more economical and safer reactor operations. Extending cycle lengths beyond 18-month cycles for pressurized water reactors (PWRs) and 24-month cycles for boiling water reactors (BWRs) requires extending fuel enrichments beyond the current 5 wt % 235U limit. Therefore, low-enriched uranium plus (LEU+) fuel is expected to be used in current light-water reactor fleets in the near term. LEU+ is a subset of high-assay low-enriched uranium (HALEU) and is a term to describe fuel enrichments above 5% up to 10%. A series of studies were conducted at Oak Ridge National Laboratory (ORNL) to compare low-enriched uranium (LEU) with LEU+ fuel with respect to isotopic fuel content, lattice parameters, and core physics to identify any challenges in operation, storage, and transportation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Feasibility Studies and Downselection of New Materials and Manufacturing Technologies for Nuclear Applications

This report is intended to present the results of multi-laboratory collaborative studies on the feasibility and downselection of the structural materials that are newly considered for application to future nuclear energy technologies. The Advanced Materials and Manufacturing Techniques (AMMT) program has been implemented to develop cross-cutting technologies in support of a broad range of nuclear reactor technologies and to maintain U.S. leadership in materials and manufacturing technologies for nuclear energy applications. In line with these program objectives, this collaborative studies aim to explore new materials utilizing advanced manufacturing technologies. The FY23 research scope consists of the feasibility studies on new materials and relevant advanced manufacturing technologies, collection of materials properties data and knowledge through experiments and literature survey, and development and application of decision criteria matrix for downselecting candidate materials and manufacturing technologies. The three-laboratory efforts for FY23 have focused on the three new material groups including oxide dispersion strengthened (ODS) materials, refractory composites and alloys, and high entropy alloys (HEAs) investigated, respectively, by Oak Ridge National Laboratory (ORNL) (work package: CT-23OR130406), Los Alamos National Laboratory (LANL) (CT-23LA130403) and Pacific Northwest National Laboratory (PNNL) (CT-23PN130408). The execution of this multi-lab research aimed to provide the AMMT program a merit-based feasibility study identifying an accelerated development path for these materials. A collaborative approach for achieving this goal was to develop a common materials evaluation criteria matrix and apply to all new candidate materials for the evaluation and prioritization of new materials using advanced manufacturing processes. The decision criteria matrix created is a matrix of criteria which a prospective material is scored against. The evaluation criteria are divided into four categories: Application Space, Environmental Compatibility, Physical & Mechanical Properties, and Manufacturability. Materials are given a score from 1−5 for each criterion, with the highest score (5) essentially mean that a material has the most near-term potential for application. Application of the decision criteria matrix will provide guidance to the future research on new materials.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

An Evaluation of Three Dimensional Scene Reconstruction Tools for Safeguards Applications

Over the past 5 years, advances in digital imaging and image processing have enabled everyday computing hardware, such as that found on laptops and even phones, to easily create 3D models of scenes from a series of still images. This field is broadly known as photogrammetry. For safeguards applications, a safeguards inspector could evaluate a 3D model of a facility (such as an enrichment plant or the top of a reactor) constructed from multiple photos instead of reviewing each photo individually. This report compares the detailed capabilities of a particular commercial offering (Quidient) that Oak Ridge National Laboratory (ORNL) has investigated in depth with the general capabilities provided in the industry and recommends areas where the general technology could be pursued for potential safeguards applications.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2023

Report on the Analysis of Plutonium-238 Oxide, Campaign #P5PO

Oak Ridge National Laboratory (ORNL) is currently producing Plutonium-238 oxide for NASA space programs. Through the irradiation of NpO 2 pellets in the High Flux Isotope Reactor (HFIR), the production of Pu-238 oxide will be used for electrical power and heat on NASA spacecraft such as the Curiosity Mars Rover and the Voyager 1 and 2. The Transuranium Analytical Laboratory (TAL) leads the analytical effort for this project, which includes the dissolution of plutonium product oxide (PUP) and the analysis of the dissolved product solution using both radiological and inductively coupled plasma mass spectrometry (ICP-MS) techniques that are required to meet product specifications. The Transuranic Analytical Laboratory received three samples of Pu-238 oxide for analysis in January of 2022. This report documents the analytical protocols performed by the TAL along with the results produced from said analytical protocols. This report also includes a comparison with the general-purpose heat source (GPHS) specifications.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

CINDER90 and CINDER2008 Comparison for Second Target Station Analysis

A preliminary target activation analysis for the Second Target Station (STS) at the Spallation Neutron Source (SNS) located at Oak Ridge National Laboratory (ORNL) was preformed using Monte Carlo N-Particle X (MCNPX), CINDER90, and the corresponding multi-group cross section libraries distributed with CINDER90. This preliminary analysis has been used to guide some design decisions of the STS target design. Using the MCNPX output files from this preliminary analysis, a comparison of the activation analysis using CINDER90 and CINDER2008 was performed. While the CINDER90 code has been validated for use in spallation source activation and transmutation calculations, and compares well with measurements, the transition to the modernized version of the code (CINDER2008) and the updated cross section libraries is desirable. The goal of this comparison is to evaluate the differences and implications for the STS activation analysis. Overall, the total activity differs between CINDER2008 and CINDER90 by no more than 20% for the materials evaluated in this report. The largest discrepancies were observed in the decay gamma intensity densities with CINDER90 calculating a factor of 2 higher than CINDER2008.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Simulations of Water Flow in Relation to a Steady Criticality in an Unsaturated Alluvial Repository

Oak Ridge National Laboratory (ORNL) is examining the conditions under which a criticality event could be ruled out for large packages placed in an unsaturated alluvial repository. This work specifically examines the water level in a stylized waste package that is assumed (1) to fail on the top, and (2) to empty as water is driven away—not by boiling—but by fluid flow phenomena driven by thermal gradients. This analysis uses the PFLOTRAN code package. Specifically, this year’s work includes examination of the heat rate at which water is driven away for various percolation rates using the same assumptions listed in the 2022 annual report. The STANDARDS (formerly UNF-ST&DARDS) package has predicted dual-purpose canister (DPC) neutron multiplication factors (k-effectives) ranging above 1.1 (unitless) with failed components. The DPC designs were not created with the intent to use for disposal purposes. Emplacing such packages may be worth consideration if it can be shown that criticality is either extremely unlikely or of very low consequence to the repository’s safety case. This work aims to help establish hydrologic boundary conditions for a highly hypothetical, highly stylized subsurface criticality event. The approach to critical is assumed to be slow, producing steady heating rates under a few kilowatts. For a DPC containing capillary media, the simulated power required for dry-out was proportional to the percolation rate but was unaffected by the size of a large breech on top of the DPC. Results for single cases with no capillary media in the DPC suggest that higher infiltration rates may be required in those cases to cause flooding. Bounding mechanisms and assumptions must be identified and characterized further by performing additional perturbations to various input parameters to demonstrate robustness of the results. This might be accomplished by examining responses to power pulses to determine the system transfer function required to enable a reduced order feedback model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Non-LWR Fuel Cycle Scenarios for SCALE and MELCOR Modeling Capability Demonstration

To assess the modeling and simulation capabilities for radionuclide characterization, criticality, and shielding in the nuclear fuel cycle of non-light–water reactor (LWR) technologies, the US Nuclear Regulatory Commission (NRC) initiated a collaborative project between the NRC, Sandia National Laboratories (SNL), and Oak Ridge National Laboratory (ORNL) with the goal to demonstrate capabilities of MELCOR and SCALE to calculate accident scenarios in all stages of the nuclear fuel cycle for relevant non-LWRs. The first project task was to develop representative nuclear fuel cycles and identify potential hazards and accident scenarios in the individual fuel cycle stages based on publicly available information. Because the nuclear fuel cycle is not established for any non-LWR concept, many assumptions were made, and it is anticipated that the details of the fuel cycles will eventually look different.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Technology Development and Integration for Volume Production of High Purity Rare Earth Metals from Phosphate Processing

Under this project and in collaboration with Pacific Northwest National Laboratory (PNNL), Oak Ridge National Laboratory (ORNL), Florida International University (FIU), and Mosaic, the FIPR Institute successfully developed and demonstrated on laboratory batch scale a complete processing technology for production of high-purity rare earth elements (REE) in the form of mixed rare earth oxides (MREO) and rare earth metals (REM) using phosphoric acid sludge (a byproduct from phosphate mining) as the REE feedstock. Based on the research results, a technical research plan has been developed with expanded team members to elevate the technology readiness level (TRL) of the subject technology from 4 to 6 by conducting continuous testing of the processing flowsheet with the ultimate goal of producing about 900 tons per year of REM using the phosphate mining byproduct. Those 900 tons of REM would contain approximately 180 tons of Y, 120 tons of Nd, 50 tons of Gd, 37 tons of Dy, 33 tons of Sm, and 31 tons of Pr, meeting the US demand of roughly 39%, 6%, 42%, 48%, 101% and 7% for these elements, respectively. The advanced technologies for REE separation and purification involves three technology companies: K-Technologies, Inc. would test their continuous-ion-exchange/continuous-ion chromatography technologies on both the REE leachate and solvent extraction concentrate for 4 production of high-purity individual or binary REM. Rare Earth Salts would test their innovative electrochemical technology on the REE leachate or re-dissolved MREO in dilute acid for production of high-purity individual or binary REM. Rare Earth Technologies, Inc. would evaluate their advanced chromatographic separation technology on the dissolved MREO product for production of high-purity individual or binary REM.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Late-Stage Research Development and Demonstration Sub-Activities Updates

Oak Ridge National Laboratory (ORNL), in collaboration with the Pacific Northwest National Laboratory (PNNL), the National Renewable Energy Laboratory (NREL), the Lawrence Berkeley National Laboratory (LBNL), and the Hummingbird Firm (a specialized consulting firm focused on promoting diversity, equity, and inclusion considerations), has initiated a national initiative known as the Heat Pump (HP) and Heat Pump Water Heater (HPWH) Field Validation Partnership. This effort involves active participation from numerous critical entities involved in research and market transformation within the field.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Development of Surface Treatment Solutions for Stamping Tools Fabricated via Additive Manufacturing

Oak Ridge National Laboratory (ORNL) and H.E.F. USA, Inc. (HEF) partnered to develop wear resistant surface treatment of additive manufactured steels for stamping die applications under CRADA agreement NFE-19-07909. This project aimed at evaluating the ARCOR® process, developed by HEF, to improve the surface behavior of 410SS (stainless steel), 410NiMo SS, 630 SS, and Maraging 250 steel coupons and demo components, fabricated via wire arc additive manufacturing (WAAM), with and without post print heat treatment. The peak hardness achieved was ~1000 HV and above (Up to 1300 HV) for all materials under proper processing parameters, and far exceeded the target hardness of 746 HV (60 HRC). Finally, stamping tools were printed and nitrocarburized with the optimum parameters, and then went through 500 fabrication cycles. Characterization of the used 17-4PH stamping tool discovered no crack or delamination in the nitrocarburized layer and the interface between the nitrocarburized layer and substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2024

LightMAT: Continous Fiber Malleable Thermoset Composites with sub-1-minute dwell times; validation of impact performance and evaluation of the efficacy of the compression forming process

Recent major advances in polymer chemistry are enabling a paradigm shift in the area of processing and re-processing/recycling of advanced composite materials. Inexpensive compression molding with short cycle times, traditionally available for thermoplastic composites only, are now possible for the thermoset resins based on polyimine chemistry. Participant will collaborate with the LightMAT consortium Labs ORNL, SNL, and PNNL to non-destructively characterize microscopic structural defects (such as voids and resin-rich areas), and perform high speed impact characterization of its malleable thermoset CFRP's. This work is critical to the validation and adoption of these materials for the automotive market and towards DOE-VTO lightweighting mission objectives.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Advanced Fuel Cycle Cost Basis Report: Module D1-7 Contact-Handled Pelletized Pressurized Heavy Water (PHWR) UOX Fuel Fabrication (Rev.1)

In addition to literature-based pressurized heavy-water reactor (PHWR) fuel price information in the 2017 AFC-CBR, the what-it-takes (WIT) unit cost data in this update is informed by new analysis and escalation of the 1978 PHWR-UOX fuel life cycle cost (LCC) data from ORNL reports prepared for the 1977–1980 Nonproliferation Alternative Systems Assessment Program (NASAP). (These reports are referenced and summarized in detail in Module D1-PR.) The PHWR fuel fabrication LCC data in these reports is scaled from a bottom-up cost estimate for a reference technology pressurized-water reactor (PWR)—uranium oxide (UOX) fuel fabrication plant by using algorithms that consider the manufacturing process complexity, fuel design complexity, plant floor space requirements, and the radiation and health, safety, and environmental (HS&E) regulatory environment of PHWR-UOX fuel production vis-à-vis light-water reactor (LWR)-UOX production (PWR fuel in this case). The module name has been changed from “Canadian Deuterium Uranium (CANDU)” to the more generic PHWR fuel fabrication in recognition that not all power reactors that might use this fuel type are considered. Unfortunately, the detailed algorithms and their design bases were not archived at the end of the NASAP effort of the commercial CANDU concept specifically developed in the middle of the last century by Atomic Energy of Canada Limited (AECL).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Machine Learning Enabled Sensor Fusion for In-Situ Defect Detection in Laser Powder Bed Fusion

Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) is among the metal 3D printing technologies most broadly adopted by the manufacturing industry. The current industry qualification paradigm for critical-application L-PBF parts relies heavily on expensive non-destructive inspection techniques such as X-Ray Computed Tomography (XCT), which significantly limits the use-cases of L-PBF. In situ monitoring of the process promises a less expensive alternative to ex situ testing, but existing sensor technologies and data analysis techniques struggle to detect sub-surface flaws (e.g., porosity and cracking) on production-scale L-PBF printers. RTX Technologies Research Center (RTRC) has licensed ORNL’s Peregrine software package – a printer- and camera-agnostic data analytics tool designed specifically for detecting process anomalies using in situ data collected during powder bed printing. The goal of this project was to feed temporally rich, multi-modal sensor data, including visible light, integrated near infrared (NIR), and spatially mapped co-axial melt pool thermal emission data into Peregrine to enable detection of subsurface flaws. XCT data was used as ground truth training data to allow Peregrine’s deep learning algorithms to recognize anomalies in these complex data streams in both test artifacts and industrially relevant geometries. Completion of this program has seen the successful implementation of multi-modal, multi-layer sensor data footprints for training of machine learning models in Peregrine. Flaws detected in XCT data have been successfully detected directly from this in situ data footprint, and initial analyses of the in situ probability-of-detection has been conducted, showing performance levels commensurate with traditional non-destructive evaluation (NDE) methods. The in situ monitoring methodology was then applied to an industrially relevant component that was using post-build NDE, highlighting the utility of the proposed method for hard-to-inspect AM components. As a direct result of this program, two journal manuscripts [1], [2] have been published in Additive Manufacturing, with additional manuscripts planned following program completion.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High Strength Aluminum Additive Manufacturing

High-strength aluminum alloys for elevated temperature applications are desirable to replace heavier and more expensive titanium alloys. However, most aluminum alloys lose a large fraction of their strength at temperatures above approximately 200°C. ORNL has designed DuAlumin-3D, an alloy with nominal composition Al-9Ce-4Ni-0.5Mn-1Zr (wt.%), which utilizes the high cooling rates in additive manufacturing (AM) to achieve a refined microstructure, and thermally stable mechanical properties. DuAlumin-3D was fabricated by laser powder bed fusion and tested for its tensile mechanical properties across a range of temperature, and for its room temperature high-cycle fatigue resistance. The alloy was tested in both the as-printed and heat treated conditions, and both parallel and perpendicular to the AM build direction. The alloy was found to have anisotropic mechanical behavior in the as-printed state, but the anisotropy significantly decreased (both for tensile and fatigue properties) following heat treatment. The tensile properties significantly out-performed benchmark wrought 2219-T61 across a wide temperature range. The room temperature fatigue performance was approximately similar to 2219-T61.

36 MATERIALS SCIENCE↗