Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTOELECTRONIC DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Inductively coupled plasma-reactive ion etching of InSb using CH{sub 4}/H{sub 2}/Ar plasma

InSb is an important material for optoelectronic devices. Most InSb devices are currently wet etched, and the etching geometries are limited due to the isotropic nature of wet etching. Inductively coupled plasma (ICP)-reactive ion etching (RIE) is a more desirable alternative because it offers a means of producing small anisotropic structures especially needed in large format infrared focal plane arrays. This work describes the novel use of ICP-RIE for fabricating InSb mesas with CH{sub 4}/H{sub 2}/Ar plasma and presents the influences of the process parameters on the etch rate and surface morphology. The parameters investigated include bias radio frequency power (50-250 W), %CH{sub 4} in H{sub 2} (10-50), argon (Ar) partial pressure (0-0.3 Pa with total pressure of 1.0 Pa), and total pressure (0.35-4 Pa). With the process parameters optimized in this investigated ranges, good etching results have been achieved with etch rates up to 80 nm/min, and etch features with sidewall angles of about 80 degree sign , the etched surface is as smooth as before the RIE process.

36 MATERIALS SCIENCE↗

Silicon nanoparticle synthesis by short-period thermal anneals at atmospheric pressure in argon

Silicon nanoparticles have been studied for a wide variety of applications including nanoelectronic, photovoltaic, and optoelectronic devices. In this work, silicon nanoparticles were synthesized by short-period annealing of silicon-on-insulator substrates to temperatures ranging between 600 and 900 deg. C in argon gas at atmospheric pressure. Two different top silicon layers were deposited by ion-beam sputtering onto oxidized substrates. The thinner 6 nm top layer samples were annealed to temperatures for 30 s periods while thicker 15 nm top layer samples were annealed for 60 s periods. For both sets of samples, nanoparticles were observed to form at all the anneal temperatures through imaging by AFM. One long-period UHV anneal study, with 30-min anneal times, observed nanoparticle formation at temperatures similar to the current work while another similar long-period UHV anneal reported nanoparticle formation only above well-defined formation temperatures that depended upon the starting top layer thickness. In the current work, the average nanoparticle radius was found to increase both with the final anneal temperature and anneal period. For the highest anneal temperatures of the 6 nm top layer samples, a changing surface topography indicated that the thinner Si source layer was becoming depleted and the nanoparticle formation process was nearing completion. No such changes were observed for the thicker 15 nm samples at the same temperatures.

36 MATERIALS SCIENCE↗

Gas source molecular beam epitaxy of scandium nitride on silicon carbide and gallium nitride surfaces

Scandium nitride (ScN) is a group IIIB transition metal nitride semiconductor with numerous potential applications in electronic and optoelectronic devices due to close lattice matching with gallium nitride (GaN). However, prior investigations of ScN have focused primarily on heteroepitaxial growth on substrates with a high lattice mismatch of 7%–20%. In this study, the authors have investigated ammonia (NH{sub 3}) gas source molecular beam epitaxy (NH{sub 3}-GSMBE) of ScN on more closely lattice matched silicon carbide (SiC) and GaN surfaces (<3% mismatch). Based on a thermodynamic analysis of the ScN phase stability window, NH{sub 3}-GSMBE conditions of 10{sup −5}–10{sup −4} Torr NH{sub 3} and 800–1050 °C where selected for initial investigation. In-situ x-ray photoelectron spectroscopy (XPS) and ex-situ Rutherford backscattering measurements showed all ScN films grown using these conditions were stoichiometric. For ScN growth on 3C-SiC (111)-(√3 × √3)R30° carbon rich surfaces, the observed attenuation of the XPS Si 2p and C 1s substrate core levels with increasing ScN thickness indicated growth initiated in a layer-by-layer fashion. This was consistent with scanning electron microscopy (SEM) images of 100–200 nm thick films that revealed featureless surfaces. In contrast, ScN films grown on 3C-SiC (111)-(3 × 3) and 3C-SiC (100)-(3 × 2) silicon rich surfaces were found to exhibit extremely rough surfaces in SEM. ScN films grown on both 3C-SiC (111)-(√3 × √3)R30° and 2H-GaN (0001)-(1 × 1) epilayer surfaces exhibited hexagonal (1 × 1) low energy electron diffraction patterns indicative of (111) oriented ScN. X-ray diffraction ω-2θ rocking curve scans for these same films showed a large full width half maximum of 0.29° (1047 arc sec) consistent with transmission electron microscopy images that revealed the films to be poly-crystalline with columnar grains oriented at ≈15° to the [0001] direction of the 6H-SiC (0001) substrate. In-situ reflection electron energy loss spectroscopy measurements determined the band-gap for the NH{sub 3}-GSMBE ScN films to be 1.5 ± 0.3 eV, and thermal probe measurements indicated all ScN films to be n-type. The four point probe sheet resistance of the ScN films was observed to increase with decreasing growth temperature and decreased with unintentional oxygen incorporation. Hg probe capacitance–voltage measurements indicated N{sub D}-N{sub A} decreased with decreasing growth temperature from 10{sup 19} to 10{sup 20}/cm{sup 3} for the lowest resistivity films to ≅5 × 10{sup 16}/cm{sup 3} for the highest resistivity films. In-situ ultraviolet photoelectron spectroscopy measurements additionally showed the valence band maximum moving from 1.4 to 0.8 eV below the Fermi level with decreasing growth temperature consistent with the increased resistivity and reduction in carrier concentration. These results suggest that additional reductions in ScN carrier concentrations can be achieved via continued optimization of ScN growth conditions and selection of substrate orientation and surface termination.

36 MATERIALS SCIENCE↗

Ultradeep electron cyclotron resonance plasma etching of GaN

Here, ultradeep (≥5 μm) electron cyclotron resonance plasma etching of GaN micropillars was investigated. Parametric studies on the influence of the applied radio-frequency power, chlorine content in a Cl 2 /Ar etch plasma, and operating pressure on the etch depth, GaN-to-SiO 2 selectivity, and surface morphology were performed. Etch depths of >10 μm were achieved over a wide range of parameters. Etch rates and sidewall roughness were found to be most sensitive to variations in RF power and % Cl 2 in the etch plasma. Selectivities of >20:1 GaN:SiO 2 were achieved under several chemically driven etch conditions where a maximum selectivity of ~39:1 was obtained using a 100% Cl 2 plasma. The etch profile and (0001) surface morphology were significantly influenced by operating pressure and the chlorine content in the plasma. Optimized etch conditions yielded >10 μm tall micropillars with nanometer-scale sidewall roughness, high GaN:SiO 2 selectivity, and nearly vertical etch profiles. These results provide a promising route for the fabrication of ultradeep GaN microstructures for use in electronic and optoelectronic device applications. In addition, dry etch induced preferential crystallographic etching in GaN microstructures is also demonstrated, which may be of great interest for applications requiring access to non- or semipolar GaN surfaces.

36 MATERIALS SCIENCE↗

Epitaxial growth of Bi 2 Se 3 in the (0015) orientation on GaAs (001)

Here we present that materials with van der Waals bonding show exotic physics and may have applications in a variety of areas including new optoelectronic devices, spintronic devices, and as quantum materials. To date, control over the morphology and surface orientation of thin films of these materials without substrate pretreatment has been difficult. In this paper, the authors report the growth of Bi 2 Se 3 on GaAs (001) substrates. By controlling the growth conditions and adatom mobility, the authors are able to obtain epitaxial growth in the (0015) orientation without substrate prepatterning. Although the growth window is small, this demonstration opens the door for future control of the orientation of van der Waals materials through control of parameters during growth and via interaction with the substrate.

36 MATERIALS SCIENCE↗

Effects of Local Environment on the Ultra-Fast Carrier Dynamics of Photo-Excited 2D Transition Metal Dichalcogenides

Layered transition metal dichalcogenides (TMDs) represent a diverse, emerging source of two-dimensional (2D) nanostructures with broad application in optoelectronics and energy. In particular, tungsten disulfide (WS2) is an efficient visible light absorber with relatively high carrier mobilities and catalytic activity towards hydrogen evolution. While explanation of the quantum confinement and excitonic effects governing TMD optoelectronic properties has progressed in recent years, less is known about the ultra-fast photoresponse and carrier dynamics following light excitation. This work utilizes transient absorption spectroscopy, with pump tunability and broadband visible probing, to monitor the carrier dynamics of both CVD-grown monolayer and solution exfoliated WS2. Picosecond-scale features include simultaneous bleaching of excitonic states and a red-shifted absorption spectrum attributed to bandgap renormalization, while free carriers, defect trapped carriers, and recombination signatures are apparent at increasing pico- to nanosecond lifetimes. Features associated with excitons, trions, and photo-excited carriers exhibit strong dependence on local environmental factors. Moisture, oxygen, chemical dopants, and dielectric environment strongly affect the strength and decay lifetimes of these photo-excited species. These results highlight the importance of understanding and controlling these local environmental factors to the rational design and implementation of 2D TMDs optoelectronic device platforms.

2D materials↗

A new metal transfer process for van der Waals contacts to vertical Schottky-junction transition metal dichalcogenide photovoltaics

Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for transferring metal contacts that does not require aligned lithography. Using this technique, we fabricate vertical Schottky-junction WS 2 solar cells, with Ag and Au as asymmetric work function contacts. Under laser illumination, we observe rectifying behavior and open-circuit voltage above 500 mV in devices with transferred contacts, in contrast to resistive behavior and open-circuit voltage below 15 mV in devices with evaporated contacts. One-sun measurements and device simulation results indicate that this metal transfer process could enable high specific power vertical Schottky-junction transition metal dichalcogenide photovoltaics, and we anticipate that this technique will lead to advances for two-dimensional devices more broadly.

36 MATERIALS SCIENCE↗

Layer-resolved ultrafast extreme ultraviolet measurement of hole transport in a Ni-TiO 2 -Si photoanode

Metal oxide semiconductor junctions are central to most electronic and optoelectronic devices, but ultrafast measurements of carrier transport have been limited to device-average measurements. Here, charge transport and recombination kinetics in each layer of a Ni-TiO 2 -Si junction is measured using the element specificity of broadband extreme ultraviolet (XUV) ultrafast pulses. After silicon photoexcitation, holes are inferred to transport from Si to Ni ballistically in ~100 fs, resulting in characteristic spectral shifts in the XUV edges. Meanwhile, the electrons remain on Si. After picoseconds, the transient hole population on Ni is observed to back-diffuse through the TiO 2 , shifting the Ti spectrum to a higher oxidation state, followed by electron-hole recombination at the Si-TiO 2 interface and in the Si bulk. Electrical properties, such as the hole diffusion constant in TiO 2 and the initial hole mobility in Si, are fit from these transient spectra and match well with values reported previously.

42 ENGINEERING↗

Giant enhancement of exciton diffusivity in two-dimensional semiconductors

Two-dimensional (2D) semiconductors bear great promise for application in optoelectronic devices, but the low diffusivity of excitons stands as a notable challenge for device development. Here, we demonstrate that the diffusivity of excitons in monolayer MoS 2 can be improved from 1.5 ± 0.5 to 22.5 ± 2.5 square centimeters per second with the presence of trapped charges. This is manifested by a spatial expansion of photoluminescence when the incident power reaches a threshold value to enable the onset of exciton Mott transition. The trapped charges are estimated to be in a scale of 10 10 per square centimeter and do not affect the emission features and recombination dynamics of the excitons. The result indicates that trapped charges provide an attractive strategy to screen exciton scattering with phonons and impurities/defects. Pointing towards a new pathway to control exciton transport and many-body interactions in 2D semiconductors.

42 ENGINEERING↗

Snapshots of a light-induced metastable hidden phase driven by the collapse of charge order

Nonequilibrium hidden states provide a unique window into thermally inaccessible regimes of strong coupling between microscopic degrees of freedom in quantum materials. Understanding the origin of these states allows the exploration of far-from-equilibrium thermodynamics and the development of optoelectronic devices with on-demand photoresponses. However, mapping the ultrafast formation of a long-lived hidden phase remains a longstanding challenge since the initial state is not recovered rapidly. Here, using state-of-the-art single-shot spectroscopy techniques, we present a direct ultrafast visualization of the photoinduced phase transition to both transient and long-lived hidden states in an electronic crystal, 1T-TaS 2 , and demonstrate a commonality in their microscopic pathways, driven by the collapse of charge order. We present a theory of fluctuation-dominated process that helps explain the nature of the metastable state. Our results shed light on the origin of this elusive state and pave the way for the discovery of other exotic phases of matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reconfiguring band-edge states and charge distribution of organic semiconductor–incorporated 2D perovskites via pressure gating

Two-dimensional (2D) semiconductor heterostructures are key building blocks for many electronic and optoelectronic devices. Reconfiguring the band-edge states and modulating their interplay with charge carriers at the interface in a continuous manner have long been sought yet are challenging. Here, using organic semiconductor–incorporated 2D halide perovskites as the model system, we realize the manipulation of band-edge states and charge distribution via mechanical—rather than chemical or thermal—regulation. Compression induces band-alignment switching and charge redistribution due to the different pressure responses of organic and inorganic building blocks, giving controllable emission properties of 2D perovskites. We propose and demonstrate a “pressure gating” strategy that enables the control of multiple emission states within a single material. We also reveal that band-alignment transition at the organic-inorganic interface is intrinsically not well resolved at room temperature owing to the thermally activated transfer and shuffling of band-edge carriers. This work provides important fundamental insights into the energetics and carrier dynamics of hybrid semiconductor heterostructures.

42 ENGINEERING↗

Persistent enhancement of exciton diffusivity in CsPbBr 3 nanocrystal solids

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr 3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using transient photoluminescence microscopy, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions or thermal heating. We interpret our observations with a model in which excitons cause NCs to transition to a long-lived metastable configuration that markedly increases exciton transport. The exciton diffusivity observed here (>0.15 square centimeters per second) is considerably higher than that observed in other NC systems, revealing unusually strong excitonic coupling between NCs. The finding of a persistent enhancement in excitonic coupling may help explain other photophysical behaviors observed in CsPbBr 3 NCs, such as superfluorescence, and inform the design of optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum control of exciton wave functions in 2D semiconductors

Excitons—bound electron-hole pairs—play a central role in light-matter interaction phenomena and are crucial for wide-ranging applications from light harvesting and generation to quantum information processing. A long-standing challenge in solid-state optics has been to achieve precise and scalable control over excitonic motion. We present a technique using nanostructured gate electrodes to create tailored potential landscapes for excitons in 2D semiconductors, enabling in situ wave function shaping at the nanoscale. Our approach forms electrostatic traps for excitons in various geometries, such as quantum dots, rings, and arrays thereof. We show independent spectral tuning of spatially separated quantum dots, achieving degeneracy despite material disorder. Owing to the strong light-matter coupling of excitons in 2D semiconductors, we observe unambiguous signatures of confined exciton wave functions in optical reflection and photoluminescence measurements. This work unlocks possibilities for engineering exciton dynamics and interactions at the nanometer scale, with implications for optoelectronic devices, topological photonics, and quantum nonlinear optics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic strain relaxation-induced directional ultrafast carrier dynamics in RuO 2 films

Ultrafast light-matter interactions inspire potential functionalities in picosecond optoelectronic applications. However, achieving directional carrier dynamics in metals remains challenging due to strong carrier scattering within a multiband environment, typically expected for isotropic carrier relaxation. In this study, we demonstrate epitaxial RuO 2 /TiO 2 (110) heterostructures grown by hybrid molecular beam epitaxy to engineer polarization selectivity of ultrafast light-matter interactions via anisotropic strain engineering. Combining spectroscopic ellipsometry, x-ray absorption spectroscopy, and optical pump-probe spectroscopy, we revealed the strong anisotropic transient optoelectronic response at an excitation energy of 1.58 eV in strain-engineered RuO 2 /TiO 2 (110) heterostructures along both in-plane [001] and [1$\bar1$0] crystallographic directions. Theoretical analysis identifies strain-induced modifications in band nesting as the underlying mechanism for enhanced anisotropic carrier relaxation observed at this excitation energy. These findings establish epitaxial strain engineering as a powerful tool for tuning anisotropic optoelectronic responses with near-infrared excitations in metallic systems, paving the way for next-generation polarization-sensitive ultrafast optoelectronic devices.

Science & Technology - Other Topics↗

Inhibited nonradiative decay at all exciton densities in monolayer semiconductors

Most optoelectronic devices operate at high photocarrier densities, where all semiconductors suffer from enhanced nonradiative recombination. Nonradiative processes proportionately reduce photoluminescence (PL) quantum yield (QY), a performance metric that directly dictates the maximum device efficiency. Although transition metal dichalcogenide (TMDC) monolayers exhibit near-unity PL QY at low exciton densities, nonradiative exciton-exciton annihilation (EEA) enhanced by van-Hove singularity (VHS) rapidly degrades their PL QY at high exciton densities and limits their utility in practical applications. Here, by applying small mechanical strain (less than 1%), we circumvented VHS resonance and markedly suppressed EEA in monolayer TMDCs, resulting in near-unity PL QY at all exciton densities despite the presence of a high native defect density. Our findings can enable light-emitting devices that retain high efficiency at all brightness levels.

36 MATERIALS SCIENCE↗

Comparative analysis of radiation effects on the electroluminescence of Si and SiGe/Si(001) heterostructures with self-assembled Islands

The effect of neutron radiation on the electroluminescence of the Si p-i-n diode containing a multilayered Ge/Si heterostructure with self-assembled nanoislands is studied. In comparison with bulk Si, the diodes containing Ge(Si) nanoislands exhibit a higher radiation hardness of the electroluminescence signal, which is attributed to spatial localization of charge carriers in the Ge/Si nanostructures. The spatial localization of charge carriers impedes their diffusion to radiation defects followed by nonradiative recombination at the defects. The results show the possibilities of using Ge/Si heterostructures with self-assembled nanoislands for the development of optoelectronic devices resistant to radiation.

36 MATERIALS SCIENCE↗

Optical properties of quantum-confined heterostructures based on GaP{sub x}N{sub y}As{sub 1-x-y} alloys

The results of calculations of the band gap in GaP{sub x}N{sub y}As{sub 1-x-y} alloys and the estimated parameter of hybridization of the conduction band in GaP and the localized level of nitrogen are reported. The optical properties of quantum-confined heterostructures based on GaP{sub x}N{sub y}As{sub 1-x-y} alloys synthesized on the GaP (100) substrate surface are studied by photoluminescence measurements in the temperature range of 15-300 K. The heterostructures consist of GaP{sub 0.814}N{sub 0.006}As{sub 0.18} quantum wells separated by GaP barrier layers. The well width and the barrier thickness are 5 nm. Heterostructures with different numbers of periods are considered. On optical excitation of the structures, an intense photoluminescence line is observed in the spectral range 620-650 nm. The photoluminescence spectra of the GaP{sub 0.814}N{sub 0.006}As{sub 0.18}/GaP quantum wells are profoundly broadened because of the inhomogeneity of the quaternary alloy in composition. It is established that the increase in the number of quantum well layers from 10 to 25 does not results in degradation of the photoluminescence properties of the heterostructures. The results of the study support the view that it is possible to produce efficient optoelectronic devices on the basis of GaP{sub x}N{sub y}As{sub 1-x-y} alloys.

36 MATERIALS SCIENCE↗

Emission intensity in the visible and IR spectral ranges from Si-based structures formed by direct bonding with simultaneous doping with erbium (Er) and europium (Eu)

The photo- and electroluminescence spectra of silicon-based structures formed by direct bonding with simultaneous doping with rare-earth metals are studied. It is shown that emission in the visible and IR spectral ranges can be obtained from n-Si:Er/p-Si and n-Si:Eu/p-Si structures fabricated by the method suggested in the study. The results obtained make this method promising for the fabrication of optoelectronic devices.

36 MATERIALS SCIENCE↗