Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Quantized quasi-two-dimensional Bose-Einstein condensates with spatially modulated nonlinearity

We investigate the localized nonlinear matter waves of the quasi-two-dimensional Bose-Einstein condensates with spatially modulated nonlinearity in the harmonic potential. It is shown that all of the Bose-Einstein condensates, similar to the linear harmonic oscillator, can have an arbitrary number of localized nonlinear matter waves with discrete energies, which are mathematically exact orthogonal solutions of the Gross-Pitaevskii equation. Their properties are determined by the principal quantum number n and secondary quantum number l: the parity of the matter wave functions and the corresponding energy levels depend only on n, and the numbers of density packets for each quantum state depend on both n and l, which describe the topological properties of the atom packets. We also give an experimental protocol to observe these phenomena in future experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hybrid Chemo-Mechanical Plastics Recycling: Solvent-free, High-speed Reactive Extrusion of Low-Density Polyethylene

Low-Density Polyethylene (LDPE) is ubiquitous in the packaging industry due to its flexibility, toughness, and low cost. However, it is typically contaminated with other materials, seriously limiting options for mechanical recycling. Interest in chemical recycling techniques such as pyrolysis and hydrothermal liquefaction is growing, but most of these processes face technoeconomic challenges that have limited commercial deployment. We present a hybrid chemo-mechanical approach using reactive twin-screw extrusion (TSE) for tailoring the molecular weight and chain structure of reclaimed LDPE. Two types of zeolite catalysts at several loading levels were evaluated over a range of processing conditions. Structural, thermal, and rheological properties of the extruded samples were investigated and compared to virgin LDPE and LDPE extruded without the catalyst. A nuclear magnetic resonance spectroscopic technique was used to investigate changes in the structure of the polymer. LDPE extruded with microporous y-zeolite showed lower degradation temperature and increased short chain branching. Mesoporous MCM-41 also induced increased branching but had no effect on degradation temperature. The theoretical mechanical energy input for the chemical modification was calculated using process modeling. The demonstrated hybrid reactive extrusion process provides a potential low-cost, simple approach for repurposing LDPE-based flexible packaging as coatings and adhesives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Capillary Condensation-Induced Imbibition in Nanoporous Media

Multiphase flow phenomena in nanoporous media are encountered in many science and engineering applications. Shales, for example, possessing complex nanopore networks, have considerable importance as source rocks for unconventional oil and gas production and as low-permeability seals for geologic carbon sequestration or nuclear waste disposal. This work presents a theoretical investigation of the processes controlling adsorption, capillary condensation, and imbibition in such nanoporous media, with a particular focus on understanding the effects of fluid-fluid and fluid-pore wall interaction forces in the interconnected nanopore space. Building on a new theoretical framework, we developed a numerical model for the multiphase nanoporous flow and tested it against water vapor uptake measurements conducted on a shale core sample. The model, which is based on the density functional approach, explicitly includes the relevant interaction forces among fluids and solids while allowing for a continuum representation of the porous medium. The experimental data include gravimetrically measured mass changes in an initially dry core sample exposed to varying levels of relative humidity, starting with a low relative humidity (rh = 0.31) followed by a period of a higher relative humidity (rh = 0.81). During this process, water vapor uptake in the dry core is recorded as a function of time. Our model suggests that, under low rh conditions, the flow within the shale sample is controlled by adsorption- and diffusion-type processes. After increasing the rh to 0.81, the uptake of water vapor becomes more significant, and according to our model, this can be explained by capillary condensation followed by immiscible displacement in the core sample. It appears that strong fluid-pore wall attractive forces cause condensation near the inlet, which then induces water imbibition further into sample.

58 GEOSCIENCES↗

An initial investigation of accuracy required for the identification of small molecules in complex samples using quantum chemical calculated NMR chemical shifts

The majority of primary and secondary metabolites in nature have yet to be identified, representing a major challenge for metabolomics studies that currently require reference libraries from analyses of authentic compounds. Using currently available analytical methods, complete chemical characterization of metabolomes is infeasible for both technical and economic reasons. For example, unambiguous identification of metabolites is limited by the availability of authentic chemical standards, which, for the majority of molecules, do not exist. Computationally predicted or calculated data are a viable solution to expand the currently limited metabolite reference libraries, if such methods are shown to be sufficiently accurate. For example, determining nuclear magnetic resonance (NMR) spectroscopy spectra in silico has shown promise in the identification and delineation of metabolite structures. Many researchers have been taking advantage of density functional theory (DFT), a computationally inexpensive yet reputable method for the prediction of carbon and proton NMR spectra of metabolites. However, such methods are expected to have some error in predicted 13 >C and 1 H NMR spectra with respect to experimentally measured values. This leads us to the question–what accuracy is required in predicted 13 C and 1 H NMR chemical shifts for confident metabolite identification? Using the set of 11,716 small molecules found in the Human Metabolome Database (HMDB), we simulated both experimental and theoretical NMR chemical shift databases. We investigated the level of accuracy required for identification of metabolites in simulated pure and impure samples by matching predicted chemical shifts to experimental data. We found 90% or more of molecules in simulated pure samples can be successfully identified when errors of 1 H and 13 C chemical shifts in water are below 0.6 and 7.1 ppm, respectively, and below 0.5 and 4.6 ppm in chloroform solvation, respectively. In simulated complex mixtures, as the complexity of the mixture increased, greater accuracy of the calculated chemical shifts was required, as expected. However, if the number of molecules in the mixture is known, e.g., when NMR is combined with MS and sample complexity is low, the likelihood of confident molecular identification increased by 90%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inter-Oligomer Interaction Influence on Photoluminescence in Cis-Polyacetylene Semiconductor Materials

Semiconducting conjugated polymers (CPs) are pivotal in advancing organic electronics, offering tunable properties for solar cells and field-effect transistors. Here, we carry out first-principle calculations to study individual cis-polyacetylene (cis-PA) oligomers and their ensembles. The ground electronic structures are obtained using density functional theory (DFT), and excited state dynamics are explored by computing nonadiabatic couplings (NACs) between electronic and nuclear degrees of freedom. We compute the nonradiative relaxation of charge carriers and photoluminescence (PL) using the Redfield theory. Our findings show that electrons relax faster than holes. The ensemble of oligomers shows faster relaxation compared to the single oligomer. The calculated PL spectra show features from both interband and intraband transitions. The ensemble shows broader line widths, redshift of transition energies, and lower intensities compared to the single oligomer. This comparative study suggests that the dispersion forces and orbital hybridizations between chains are the leading contributors to the variation in PL. It provides insights into the fundamental behaviors of CPs and the molecular-level understanding for the design of more efficient optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Rapid for a UNF cask benchmark problem

To ensure criticality safety and maintain a high level of security of Used Nuclear Fuel (UNF), it is necessary to perform detailed Particle Transport simulations. The commonly used technique is the 3-D, continuous energy Monte Carlo method that is time-consuming and, for eigenvalue calculations, may have difficulties with the source convergence. Wenner and Haghighat and Dufek demonstrated that in criticality problems with high dominance ratio and/or under-sampling possibilities, the fission matrix (FM) methodology should be used in order to be able to obtain unbiased solution. The RAPID (Real-time Analysis for Particle transport and In-situ Detection) code system is based on the Multi-stage Response-function Transport (MRT) methodology, and uses the FM formulation to determine eigenvalue, subcritical multiplication and fission density distribution of nuclear systems. This paper uses a benchmark problem similar to the GBC-32 Cask to evaluate the accuracy and performance of RAPID against the results of a reference MCNP solution. We performed a detailed sensitivity analysis on a single-assembly model in order to determine the MCNP eigenvalue parameters necessary to obtain a reliable reference solution. These results provided a guide for the selection of an appropriate set of parameters for the eigenvalue calculation for the whole cask. The paper is organized as follows: initially, the RAPID code system is briefly discussed; then, the benchmark problem is introduced. The methodology used to analyze results is proposed and some of the results of different cases are analyzed to identify the best set of eigenvalue parameters for a reference MCNP calculation. The selected case is then compared with the RAPID calculation for both a single assembly and a full cask model. In the end some conclusions and future work perspectives are drawn.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient Calculation of NMR Shielding Constants Using Composite Method Approximations and Locally Dense Basis Sets

This paper presents a systematic study of applying composite method approximations with locally dense basis sets (LDBS) to efficiently calculate NMR shielding constants in small and medium-sized molecules. The pcSseg-n series of basis sets are shown to have similar accuracy to the pcS-n series when n ≥ 1 and can slightly reduce computational costs. We identify two different LDBS partition schemes that perform very effectively for density functional calculations. Here, we select a large subset of the recent NS372 database containing 290 H, C, N, and O shielding values evaluated by reference methods on 106 molecules to carefully assess methods of the high, medium, and low computational costs to make practical recommendations. Our assessment covers conventional electronic structure methods (density functional theory and wave function) with global basis calculations, as well as their use in one of the satisfactory LDBS approaches, and a range of composite approaches, also with and without LDBS. Altogether 99 methods are evaluated. On this basis, we recommend different methods to reach three different levels of accuracy and time requirements across the four nuclei considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of the PHISICS/RELAP5-3D ring and block model results for phase I of the OECD/NEA MHTGR-350 benchmark

The PHISICS code system has been under development at INL since 2010. It consists of several modules providing improved coupled core simulation capability: INSTANT (3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and modules performing criticality searches, fuel shuffling and generalized perturbation. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D was finalized in 2013, and as part of the verification and validation effort the first phase of the OECD/NEA MHTGR-350 Benchmark has now been completed. The theoretical basis and latest development status of the coupled PHISICS/RELAP5-3D tool are described in more detail in a concurrent paper. This paper provides an overview of the OECD/NEA MHTGR-350 Benchmark and presents the results of Exercises 2 and 3 defined for Phase I. Exercise 2 required the modelling of a stand-alone thermal fluids solution at End of Equilibrium Cycle for the Modular High Temperature Reactor (MHTGR). The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 required a coupled neutronics and thermal fluids solution, and the PHISICS/RELAP5-3D code suite was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of results obtained with the traditional RELAP5-3D “ring” model approach against a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity that can be obtained by this “block” model is illustrated with comparison results on the temperature, power density and flux distributions. Furthermore, it is shown that the ring model leads to significantly lower fuel temperatures (up to 10%) when compared with the higher fidelity block model, and that the additional model development and run-time efforts are worth the gains obtained in the improved spatial temperature and flux distributions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fluoride-Cooled High-Temperature Pebble-Bed Reactor Reference Plant Model Updates

This work presents the latest improvements to, and investigations performed with, the Fluoride-Cooled High-Temperature Pebble-Bed Reactor reference plant models for the United States Nuclear Regulatory Commission. These models, developed with the Comprehensive Reactor Analysis Bundle, or BlueCRAB, serve as the foundation for the future development of detailed design evaluation models based on license applications. BlueCRAB is the code suite proposed for non-light-water reactor systems safety analyses, and it incorporates various simulation tools developed by the Nuclear Energy Advance Modeling and Simulation program, including the Griffin code for reactor physics, the Pronghorn and SAM codes for core thermal fluids, the BISON code for solid conduction and fuel performance, and the SAM code for system analysis. The primary objective of this work is to assess the level of readiness of BlueCRAB for modeling fluoride-cooled high-temperature pebble-bed reactors. We first developed numerical models in BlueCRAB that include the key physics for this technology, ensuring an adequate level of fidelity for modeling the core performance during accident scenarios. This was followed by simulation of transient scenarios, two loss-of-forced-cooling events (one protected and one unprotected), and two control rod withdrawal events (one delayed and one prompt supercritical reactivity insertion). The analysis includes comparisons between the 2-D thermal fluid porous media models in Pronghorn and SAM, comparisons between coupled Pronghorn-Griffin and coupled SAM-Griffin models for two loss-of-forced cooling events and one control rod withdrawal event, and comparisons between SAM single-solve and domain-overlapping approaches for multi-scale thermal fluid coupling. In addition, we performed comparisons between 3-D, 2-D, and 0-D neutronic models for the two control rod withdrawal scenarios with Pronghorn-Griffin. The results show that the BlueCRAB models led to physically intuitive solutions for the scenarios examined. The changes in the various scalar and vector fields such as the neutron flux, power, temperatures, densities, pressures, and velocities are all within the expected ranges, and their distributions can be explained from the system response of the transients and the geometric and material variations. Several comparisons suggest that the porous media models in Pronghorn and SAM can lead to similar solutions, even though they are based on different methodologies. The simulations demonstrate that there are differences between the various levels of fidelity, and it is advisable to have flexible tools that can cover the breadth and depth of needs that may arise in future technical evaluations. We believe that BlueCRAB’s capabilities represent a significant asset for confirmatory analyses aimed at resolving important safety questions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Radiative properties of astrophysical matter : a quest to reproduce astrophysical conditions on earth.

Experiments in terrestrial laboratories can be used to evaluate the physical models that interpret astronomical observations. The properties of matter in astrophysical objects are essential components of these models, but terrestrial laboratories struggle to reproduce the extreme conditions that often exist. Megajoule-class DOE/NNSA facilities such as the National Ignition Facility and Z can create unprecedented amounts of matter at extreme conditions, providing new capabilities to test astrophysical models with high accuracy. Experiments at these large facilities are challenging, and access is very competitive. However, the cylindrically-symmetric Z source emits radiation in all directions, enabling multiple physics experiments to be driven with a single Z discharge. This helps ameliorate access limitations. This article describes research efforts under way at Sandia National Laboratories Z facility investigating radiation transport through stellar interior matter, population kinetics of atoms exposed to the intense radiation emitted by accretion powered objects, and spectral line formation in white dwarf (WD) photospheres. Opacity quantifies the absorption of radiation by matter and strongly influences stellar structure and evolution, since radiation dominates energy transport deep inside stars. Opacity models have become highly sophisticated, but laboratory tests at the conditions existing inside stars have not been possible - until now. Z research is presently focused on measuring iron absorption at conditions relevant to the base of the solar convection zone, where the electron temperature and density are 190 eV and 9 x 10{sup 22} e/cc, respectively. Creating these conditions in a sample that is sufficiently large, long-lived, and uniform is extraordinarily challenging. A source of radiation that streams through the relatively-large samples can produce volumetric heating and thus, uniform conditions, but to achieve high temperatures a strong source is required. Z dynamic hohlraums provide such a megajoule-class source. Initial Z experiments measured transmission through iron samples ionized to the same charge states that exist at the solar convection zone base. The resulting data made it possible to test challenging aspects of the opacity calculations such as the ionization balance and the completeness and accuracy of the atomic energy level description. However, the density was too low to provide a definitive test of the physics at the solar convection zone base. Recent experiments have reached higher densities, and opacity model tests for stellar interiors now appear within reach. Accretion powered objects, including active galactic nuclei, x-ray binaries, and black hole accretion disks, are the most luminous objects in the universe. Astrophysical models for these objects rely largely on comparing spectroscopic predictions with observations. A dilemma arises because the spectra originate from plasmas that are bathed in the enormous photon flux from the accretion disk and photoionization dominates the atomic ionization and energy level populations. Thus, constraining astrophysical models depends on accurate atomic models for photoionized plasmas. Unfortunately, to date the ionization in almost all laboratory experiments is collision-dominated and very few tests of photoionized plasma atomic kinetics exist. Megajoule class high-energy-density facilities can help because they generate higher x-ray fluence over larger spatial scales and longer times. Expanded iron foils and pre-filled neon gas cells have been used in experiments at Z to study photoionized atomic kinetics in two elements commonly observed in astrophysical objects. In these experiments, low density samples are exposed to a measured intense x-ray spectrum, emergent emission or absorption spectra are recorded, and the results are compared to predictions made with spectral synthesis codes used by astrophysicists. Initial experiments focused on testing models used to interpret spectra from the 'warm absorber,' a plasma observed in the vicinity of some active galactic nuclei. In future experiments, spectra from plasmas exposed to higher radiation intensities will be measured, possibly leading to improved understanding of the plasma in the immediate vicinity of the accretion disk. WDs are the oldest stars and can serve as cosmic clocks, since the universe must be at least as old as the objects within it. Astrophysicists determine WD ages using stellar models combined with effective temperature (T{sub eff}) and mass inferred from spectral observations of WD photospheres. Many line profiles in the observed spectra are dominated by Stark broadening, a process sensitive to the photosphere density and related to the total mass through the stellar model. Accurate Stark broadening theory is, therefore, critical to the precise determination of the WD properties and the inferred ages.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Gas retention and release from Hanford Site sludge waste tanks - 15491

Radioactive wastes from nuclear fuel processing are stored in large underground storage tanks at the Hanford Site. Solid wastes can be divided into salt-cake (mostly precipitated soluble sodium nitrate and nitrite salts with some interstitial liquid consisting of concentrated salt solutions) and sludge (mostly low solubility aluminum and iron compounds with relatively dilute interstitial liquid). Waste generates hydrogen through the radiolysis of water and organic compounds, radio-thermolytic decomposition of organic compounds, and corrosion of a tank's carbon steel walls. Nonflammable gases, such as nitrous oxide and nitrogen, are also produced. Additional flammable gases (e.g., ammonia and methane) are generated by chemical reactions between various degradation products of organic chemicals present in the tanks. Six double-shell tanks (DSTs) containing salt-cake wastes began showing signs of gas accumulation and buoyant instability in the form of periodic waste level drops in the 1980's. Studies in the 1990's indicated that gas would accumulate in the settled solids layer until its bulk density was lower than the supernatant liquid. The resultant gas release caused by this instability was termed a Buoyant Displacement Gas Release Event (BDGRE). Criteria were developed to prevent forming additional waste tanks that exhibited BDGREs. Significant gas accumulation and BDGREs were never observed in tanks containing predominantly sludge wastes. Literature reviews, data from Hanford Site waste tanks, and experiments with waste simulants have led to new conclusions on gas retention and release in sludge waste. The data show similar overall behavior where initially the settled solids volume increases as gas bubbles form. Gas fraction in the settled solids increases to a peak concentration after which additional generated gas escapes through connected cracks and there is a balance between gas generation and gas release with little change in gas fraction. Experiments showed that this behavior does not change as sludge waste depth increases. Sufficient data now exist to differentiate between gas retention and release behavior in Hanford Site sludge waste tanks and salt-cake waste tanks. The salt-cake criteria do not need to be applied to sludge waste tanks that exhibit certain gas retention and release behavior. Criteria for waste characteristics and process behavior have been defined that identify specific wastes and tanks that, based on previous operating experience, will have low gas retention and will not exhibit large, spontaneous releases. The first criterion defines what waste is considered sludge and what waste is considered salt-cake. If the mass ratio of soluble to insoluble constituents is below 2.5, then the waste is sludge. The second criterion is a density difference criterion that prevents tanks being operated in a region where sludge buoyancy might occur. For large gas releases to occur, the settled solids must accumulate sufficient gas to become less dense than the overlying supernatant (i.e., the settled solids would become buoyant). Based on previous operating experience, the ratio of liquid density to degassed settled solids bulk density (ρl/ρB) should be maintained at ≤ 0.84. This ensures that retained gas content in the sludge would need to exceed 16% by volume for the settled solids to become buoyant in the overlying supernatant. Tank waste that satisfies the mass ratio criterion, the liquid to bulk solids density criterion, and has process data supporting typical Hanford waste sludge behavior does not pose a significant risk for a large spontaneous gas release event. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Gas-Cooled High-Temperature Pebble-Bed Reactor Reference Plant Model Updates

This work presents the latest improvements to, and investigations performed with, the pebble-bed high-temperature gas-cooled reactor (PB-HTGR) reference plant models for the United States Nuclear Regulatory Commission. These models serve as the foundation for the future development of detailed design evaluation models based on license applications. The reference plant models have been developed with the Comprehensive Reactor Analysis Bundle, or BlueCRAB, which is the code suite proposed for non-light-water reactor systems safety analysis. It incorporates various simulation tools developed by the Nuclear Energy Advanced Modeling and Simulation program, including the Griffin code for reactor physics, the Pronghorn and SAM codes for core thermal fluids, the BISON code for solid conduction and fuel performance, and the SAM code for system analysis. The primary objective of the work that was performed was to assess BlueCRAB’s level of readiness for modeling a PB-HTGR. To do so, we first developed numerical models in BlueCRAB that include the key physics for this technology to ensure an adequate level of fidelity for modeling PB-HTGR core performance and for performing multiphysics simulations for equilibrium core conditions and different accident scenarios. Then we simulated transient scenarios, including depressurized and pressurized loss of forced cooling accidents, over-cooling, and control rod withdrawal events with delayed and prompt supercritical reactivity insertions. The analysis in this report includes comparisons of the 2D thermal fluid porous media models in Pronghorn and SAM, and comparisons of coupled SAM/Griffin/SAM and coupled Pronghorn/Griffin for depressurized and pressurized loss of forced cooling, over-cooling, and control rod withdrawal events. In addition, we compare 3D, 2D, and 0D/PKE neutronic models for the two control rod withdrawal scenarios with coupled Pronghorn/Griffin. The comparisons show that the BlueCRAB models lead to physically intuitive solutions for the scenarios examined. The changes in the various scalar and vector fields, such as neutron flux, power, temperature, density, pressure, and velocity, are within the expected ranges, and their distributions can be explained by the system response of the transients and the geometric and material variations. Several comparisons suggest that the porous media models in Pronghorn and SAM can lead to similar solutions, even though they are based on different methodologies. This work further highlights the need for flexible tools with various levels of fidelity to cover the breadth and depth of needs that may arise in future technical evaluations of the PB-HTGR. We believe that the BlueCRAB capabilities will be a significant asset for confirmatory analyses in order to resolve important safety questions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Review of the U.S. Department of Energy's "Deep Dive" Effort to Understand Voltage Fade in Li- and Mn-rich Cathodes

With roughly two-thirds of daily oil consumption in the United States allotted for transportation, the possibility of efficient and affordable electric vehicles suggests a way to substantially alleviate the Country’s dependence on oil and mitigate the rise of greenhouse gases. Although commercialized Li-ion batteries do not currently meet the stringent demands of a would-be, economically competitive, electrified vehicle fleet, significant efforts are being focused on promising new materials for the next generation of Li-ion batteries. The leading class of materials most suitable for the challenge is the Li- and manganese-rich class of oxides. Denoted as LMR-NMC (Li-manganese-rich, nickel, manganese, cobalt), these materials could significantly improve energy densities, cost, and safety, relative to state-of-the-art Ni- and Co-rich Li-ion cells, if successfully developed.1 The success or failure of such a development relies heavily on understanding two defining characteristics of LMR-NMC cathodes. The first is a mechanism whereby the average voltage of cells continuously decreases with each successive charge and discharge cycle. This phenomenon, known as voltage fade, decreases the energy output of cells to unacceptable levels too early in cycling. The second characteristic is a pronounced hysteresis, or voltage difference, between charge and discharge cycles. The hysteresis represents not only an energy inefficiency (i.e., energy in vs energy out) but may also complicate the state of charge/depth of discharge management of larger systems, especially when accompanied by voltage fade. n 2012, the United States Department of Energy’s Office of Vehicle Technologies, well aware of the inherent potential of LMR-NMC materials for improving the energy density of automotive energy storage systems, tasked a team of scientists across the National Laboratory Complex to investigate the phenomenon of voltage fade. Unique studies using synchrotron X-ray absorption (XAS) and high-resolution diffraction (HR-XRD) were coupled with nuclear magnetic resonance spectroscopy (NMR), neutron diffraction, high-resolution transmission electron microscopy (HR-TEM), first-principles calculations, molecular dynamics simulations, and detailed electrochemical analyses. These studies demonstrated for the first time the atomic-scale, structure–property relationships that exist between nanoscale inhomogeneities and defects, and the macroscale, electrochemical performance of these layered oxides. These inhomogeneities and defects have been directly correlated with voltage fade and hysteresis, and a model describing these mechanisms has been proposed. This Account gives a brief summary of the findings of this recently concluded, approximately three-year investigation. Lastly, the interested reader is directed to the extensive body of work cited in the given references for a more comprehensive review of the subject.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shell effects in fission and quasi-fission

Quantum shell effects are responsible for asymmetric fission. They are also expected to affect the formation of fission fragments in quasi-fission reactions occurring in heavy-ion collisions. Shell effects in fission are studied with the single-particle energy level density near the Fermi level. In particular, shell effects in the pre-fragments and their role in fixing the final mass asymmetry of the fission fragments are discussed. Systematic time-dependent Hartree-Fock simulations of heavy-ion collisions show that quasi-fission fragment properties share strong similarities with fragments formed in fission of the compound nuclei. This is an indication that similar shell effects are responsible for the final asymmtery in both mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-E-T-433: Calibration Accuracy in Mailed High-Resolution 3D Dosimetry Service for SRS/SBRT QA

Purpose: SRS/SBRT combines hypofractionation with excellent dose distributions. However, extremely steep gradients across the target along with dose escalation, if not administered accurately, may lead to serious complications, recurrences, or even fatalities. Existing commercial QA products either lack adequate spatial resolution or the 3D aspect. By contrast, the new CrystalBall™ mailed high-resolution 3D dosimetry service removes the above limitations while reducing the overall workload on medical physics staff. The exposed dosimeters, which change optical density in proportion to local dose, are sent back to the manufacturer (MGS Research Inc., Madison, CT) for sub-millimeter-resolution laser-CT scanning and QA data analysis. QA report is returned electronically within 24 hours. The purpose of this study was to evaluate the dose calibration accuracy in this system. Methods: Two spherical CrystalBall™ polymer gel dosimeters from the same batch, 166 mm diameter, with embedded 3D image registration markers, were mounted in a special phantom designed for reproducible positioning. For full end to end testing, the optical guidance array was mounted onto the phantom and a CT was taken. Two separate Rapid Arc SRS plans were designed. Varian Medical Systems optical guidance system was used to position the phantom and the SRS treatment plans were delivered to the two spheres on Varian's Trilogy Accelerator. Exposed dosimeters were mailed back to the manufacturer for laser CT scanning and analysis. Results: For each plan, 3D gamma passing rate was 100% for 2%/2mm distance-to-agreement criteria above 50% isodose level. The two calibration curves, generated using volumetric dose and optical density data, showed excellent mutual agreement (max difference 2.2%, median difference 0.75%). Conclusion: The clinical utility of new CrystalBall™ mailed QA service for SRS/SBRT and high accuracy of dose calibration have been validated. The workflow associated with the use of the CrystalBall™ in clinical setting was found to be minimal. The presenting author is the founder of and has an ownership in MGS Research Inc which manufactures the CrystalBall system for 3D dosimetry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The impacts of charge transfer, localization, and metallicity on hydrogen retention and transport capacity

Solid state hydrides such as early transition metal hydrides are of inestimable importance for the future of hydrogen energy and are actively being investigated for energy conversion and storage applications such as fuel cells, solid-state batteries and neutron moderators. The retention and transport behavior of hydrogen in these hydrides has a huge role on the extended performance of components. While early transition-metal-based compounds exhibit many peculiar properties due to their unique correlated electronic signatures arising from -orbital electrons, the fundamental chemistry and transport behavior of hydrogen in such hydrides is not well understood. In the present work, using density functional theory, a highly intricate bonding feature is revealed through the theoretical investigation of the electronic structure of early transition metal hydrides YH 2 and ZrH 2 . In particular, a pronounced charge transfer from the transition element to H, results in localized electron densities at deep energy levels. The interplay between intrinsic charge transfer, charge localization, and metallicity in YH 2 and ZrH 2 leads to strong chemical bonding between metal and hydrogen atoms and large energy barriers for the migration of hydrogen vacancies. Specifically, hydrogen vacancies are found to be stable in the neutral state due to electron screening effects, accompanied by substantially high migration barriers between 0.8–1.2 eV along different crystallographic directions. In contrast, recent literature shows the migration barrier for charged H vacancies in insulating s-block metal hydrides lie between 0.1–0.4 eV, which is suitable for fast conduction applications. This pivotal electron structure difference exploited between early transition metal hydrides and alkali/alkaline earth metal hydrides determines extended hydrogen retention in these early transition metal hydrides. Finally, this work explains fundamental differences between the electronic structure of s-block and d-block metal hydrides, and its impact on the mobility of hydrogen vacancies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

REJECTING PROPOSED DENSE MATTER EQUATIONS OF STATE WITH QUIESCENT LOW-MASS X-RAY BINARIES

Neutrons stars are unique laboratories for discriminating between the various proposed equations of state of matter at and above nuclear density. One sub-class of neutron stars—those inside quiescent low-mass X-ray binaries (qLMXBs)—produce a thermal surface emission from which the neutron star radius (R {sub NS}) can be measured, using the widely accepted observational scenario for qLMXBs, assuming unmagnetized H atmospheres. In a combined spectral analysis, this work first reproduces a previously published measurement of the R {sub NS}, assumed to be the same for all neutron stars, using a slightly expanded data set. The radius measured is R{sub NS}=9.4±1.2 km. On the basis of spectral analysis alone, this measured value is not affected by imposing an assumption of causality in the core. However, the assumptions underlying this R {sub NS} measurement would be falsified by the observation of any neutron star with a mass >2.6 M {sub ☉}, since radii <11 km would be rejected if causality is assumed, which would exclude most of the R {sub NS} parameter space obtained in this analysis. Finally, this work directly tests a selection of dense matter equations of state: WFF1, AP4, MPA1, PAL1, MS0, and three versions of equations of state produced through chiral effective theory. Two of those, MS0 and PAL1, are rejected at the 99% confidence level, accounting for all quantifiable uncertainties, while the other cannot be excluded at >99% certainty.

79 ASTRONOMY AND ASTROPHYSICS↗

Sensitivity of the CUORE detector to 14.4 keV solar axions emitted by the M1 nuclear transition of {sup 57}Fe

In this paper we present a calculation of the sensitivity of the CUORE detector to the monoenergetic 14.4 keV solar axions emitted by the M1 nuclear transition of {sup 57}Fe in the Sun and detected by inverse coherent Bragg-Primakoff conversion in single-crystal TeO{sub 2} bolometers. The expected counting rate is calculated using density functional theory for the electron charge density of TeO{sub 2} and realistic background and energy resolution of CUORE. Monte Carlo simulations for 5y × 741 kg=3705 kg y of exposure are analyzed using time correlation of individual events with the theoretical time-dependent counting rate. We find an expected model-independent limit on the product of the axion-photon coupling and the axion-nucleon coupling g{sub aγγ}g{sub aN}{sup eff} < 1.105 × 10{sup −16} /GeV for axion masses less than 500 eV with 95% confidence level.

79 ASTRONOMY AND ASTROPHYSICS↗