Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Network topologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Topology Control for Load Shed Recovery

This paper introduces load shed recovery actions for transmission networks by presenting the dc optimal load shed recovery with transmission switching model (DCOLSR-TS). The model seeks to reduce the amount of load shed, which may result due to transmission line and/or generator contingencies, by modifying the bulk power system topology. Since solving DCOLSR-TS is computationally difficult, the current work also develops a heuristic (MIP-H), which improves the system topology while specifying the required sequence of switching operations. Experimental results on a list of N-1 and N-2 critical contingencies of the IEEE 118-bus test case demonstrate the advantages of utilizing MIP-H for both on-line load shed recovery and recurring contingency-response analysis. This is reinforced by the introduction of a parallelized version of the heuristic (Par-MIP-H), which solves the list of critical contingencies close to 5x faster than MIP-H with 8 cores and up to 14x faster with increased computational resources. The current work also tests MIP-H on a real-life, large-scale network in order to measure the computational performance of this tool on a real-world implementation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Anomaly detection search for new resonances decaying into a Higgs boson and a generic new particle $X$ in hadronic final states using $\sqrt{s}$ = 13 TeV $pp$ collisions with the ATLAS detector

A search is presented for a heavy resonance $Y$ decaying into a Standard Model Higgs boson $H$ and a new particle $X$ in a fully hadronic final state. The full Large Hadron Collider run 2 dataset of proton-proton collisions at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector from 2015 to 2018 is used and corresponds to an integrated luminosity of 139 fb –1 . The search targets the high $Y$-mass region, where the $H$ and $X$ have a significant Lorentz boost in the laboratory frame. A novel application of anomaly detection is used to define a general signal region, where events are selected solely because of their incompatibility with a learned background-only model. It is constructed using a jet-level tagger for signal-model-independent selection of the boosted $X$ particle, representing the first application of fully unsupervised machine learning to an ATLAS analysis. Two additional signal regions are implemented to target a benchmark $X$ decay into two quarks, covering topologies where the $X$ is reconstructed as either a single large-radius jet or two smallradius jets. The analysis selects Higgs boson decays into $b$$\overline{b}$, and a dedicated neural-network-based tagger provides sensitivity to the boosted heavy-flavor topology. No significant excess of data over the expected background is observed, and the results are presented as upper limits on the production cross section $σ$ ($pp$ → $Y$ → $XH$ → $q$$\overline{q}$$b$$\overline{b}$) for signals with $m_Y$ between 1.5 and 6 TeV and $m_X$ between 65 and 3000 GeV

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recognition of Handwritten Arabic words using a neuro-fuzzy network

We present a new method for the recognition of handwritten Arabic words based on neuro-fuzzy hybrid network. As a first step, connected components (CCs) of black pixels are detected. Then the system determines which CCs are sub-words and which are stress marks. The stress marks are then isolated and identified separately and the sub-words are segmented into graphemes. Each grapheme is described by topological and statistical features. Fuzzy rules are extracted from training examples by a hybrid learning scheme comprised of two phases: rule generation phase from data using a fuzzy c-means, and rule parameter tuning phase using gradient descent learning. After learning, the network encodes in its topology the essential design parameters of a fuzzy inference system.The contribution of this technique is shown through the significant tests performed on a handwritten Arabic words database.

99 GENERAL AND MISCELLANEOUS↗

Software-Defined Data Center Network Architecture using VXLAN-based BGP EVPN for Dynamic Workflows in a Supercomputing Environment (VXLAN-based BGP EVPN Fabric for HPC) v1

This software repository automates the deployment of a multi-vendor VXLAN-based BGP EVPN architecture, leveraging Containerlab to instantiate a stretched CLOS topology. It integrates Linux, Nokia SR Linux, and Arista cEOS, using BGP for underlay, overlay, and topology extension. The software enables rapid prototyping and testing of advanced network configurations. Its key advantage lies in providing a dynamic, programmable environment for research and development of critical technologies supporting dynamic workflows within supercomputing environments, surpassing the limitations of static, vendor-locked alternatives by fostering interoperability and agility.

Kumar, Ronal [Lawrence Berkeley National Laborator↗

Spiral waves in externally excited neuronal network: Solvable model with a monotonically differentiable magnetic flux

Spiral waves are particular spatiotemporal patterns connected to specific phase singularities representing topological wave dislocations or nodes of zero amplitude, witnessed in a wide range of complex systems such as neuronal networks. The appearance of these waves is linked to the network structure as well as the diffusion dynamics of its blocks. We report a novel form of the Hindmarsh-Rose neuron model utilized as a square neuronal network, showing the remarkable multistructure of dynamical patterns ranging from characteristic spiral wave domains of spatiotemporal phase coherence to regions of hyperchaos. The proposed model comprises a hyperbolic memductance function as the monotone differentiable magnetic flux. Hindmarsh-Rose neurons with an external electromagnetic excitation are considered in three different cases: no excitation, periodic excitation, and quasiperiodic excitation. We performed an extensive study of the neuronal dynamics including calculation of equilibrium points, bifurcation analysis, and Lyapunov spectrum. We have found the property of antimonotonicity in bifurcation scenarios with no excitation or periodic excitation and identified wide regions of hyperchaos in the case of quasiperiodic excitation. Furthermore, the formation and elimination of the spiral waves in each case of external excitation with respect to stimuli parameters are investigated. We have identified novel forms of Hindmarsh-Rose bursting dynamics. Our findings reveal multipartite spiral wave formations and symmetry breaking spatiotemporal dynamics of the neuronal model that may find broad practical applications. © 2019 Author(s).

60 APPLIED LIFE SCIENCES↗

Syntheses, topological analyses and photoelectric properties of Ag(I)/Cu(I) metal-organic frameworks based on a tetradentate imidazolate ligand

A new tetradentate imidazolate ligand 1,1',1'',1'''-(2,2',4,4',6,6'-hexamethylbiphenyl-3,3',5,5'-tetrayl) tetrakis(methylene)(1H-imidazole) (L) and four Ag(I)/Cu(I) coordination polymers, namely [(MCN){sub 3}L]{sub n} (1: M=Ag; 2: M=Cu), and [(MSCN){sub 2}L]{sub n} (3: M=Ag; 4: M=Cu) are described. All four new coordination polymers were fully characterized by infrared spectroscopy, elemental analysis and single-crystal X-ray diffraction. Compound 1 features a 3D supramolecular framework constructed by 1D chains through inter-chain Ag-N(CN) and inter-layer Ag-N(L) weak interactions with an uninodal 6{sup 6} topology. Complex 2 presents a 3D framework characterized by a tetranodal (3,4)-connected (3.4.5.10{sup 2}.11)(3.4.5.6.7.9)(3.6.7)(6.10{sup 2}) topology. Complexes 3 and 4 are isostructural, and both have a 3D network of trinodal 4-connected (4.8{sup 5}){sub 2}(4{sup 2}.8{sup 2}.10{sup 2})(4{sup 2}.8{sup 4}){sub 2} topology. The luminescent properties for these compounds in the solid state as well as the possible ferroelectric behavior of 1 are discussed. - Graphical abstract: Four coordination polymers built upon Ag(I)/Cu(I) pseudohalides and a imidazolate ligand have been solvothermally synthesized. The luminescent properties for these compounds and the possible ferroelectric behavior of 1 are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topological Relationship-Based Flow Direction Modeling: Stream Burning and Depression Filling

Flow direction modeling consists of (a) an accurate representation of the river network and (b) digital elevation model (DEM) processing to preserve characteristics with hydrological significance. In part 1 of our study, we presented a mesh-independent approach to representing river networks on different types of meshes. This follow-up part 2 study presents a novel DEM processing approach for flow direction modeling. This approach consists of (a) a topological relationship-based hybrid breaching-filling method to conduct stream burning for the river network and (b) a modified depression removal method for rivers and hillslopes. Our methods reduce modifications to surface elevations and provide a robust two-step procedure to remove local depressions in DEM. They are mesh-independent and can be applied to both structured and unstructured meshes. We applied our new methods with different model configurations to the Susquehanna River Basin. The results show that topological relationship-based stream burning, and depression-filling methods can reproduce the correct river networks, providing high-quality flow direction and other characteristics for hydrologic and Earth system models.

54 ENVIRONMENTAL SCIENCES↗

pH- and metal-dependent structural diversity from mononuclear to two-dimensional polymers based on a flexible tricarboxylate ligand

Six complexes based on a flexible tripodal ligand H{sub 3}TTTA (2,2',2''-[1,3,5-triazine-2,4,6-triyltris(thio)]tris-acetic acid) have been hydrothermally synthesized and structurally characterized. X-ray single-crystal diffractions reveal that they have rich structural chemistry: mononuclear, [Zn(HTTTA)(2,2'-bpy)(H{sub 2}O){sub 3}]{sub n} (1); dimeric metallamacrocycle, [Zn(HTTTA)(2,2'-bipy)(H{sub 2}O)]{sub n} (2) and [Cd(HTTTA)(2,2'-bipy)(H{sub 2}O).H{sub 2}O]{sub n} (3); two-dimensional networks with binodal (3,6)-connected CdI{sub 2} topology based on linear trinuclear M{sub 3}({mu}{sup 2}-CO{sup 2}){sub 4}({mu}{sub 2}-CO{sub 2}){sub 2} SBUs (Secondary Building Units), [M{sub 3}(TTTA){sub 2}(2,2'-bipy){sub 2}(H{sub 2}O){sub m}.nH{sub 2}O]{sub n} (M=Zn.4, m=0, n=4; Cd.5 and Mn.6, m=2; n=2). The value of pH and the metal ions has large influences on the resulting structures. The flexible tricarboxylic acid exhibits four coordination modes from monodentate to {mu}{sup 6}-bridge. Fluorescence and magnetic properties of the complexes have also been investigated in details. - Graphical abstract: Six complexes based on a flexible tricarboxylate ligand exhibit rich structural chemistry from mononuclear to 2D (3,6)-connected networks. PH and metal ions have large influences on the resulting structures. Highlights: > Six complexes based on a flexible multicarboxylate ligand have been reported. > They exhibit diverse structures from mono- and binuclear molecules to 2-D layers. > pH and metal ions have large influences on the final products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spacecraft On-Board Information Extraction Computer (SOBIEC)

The Jet Propulsion Laboratory is the Technical Monitor on an SBIR Program issued for Irvine Sensors Corporation to develop a highly compact, dual use massively parallel processing node known as SOBIEC. SOBIEC couples 3D memory stacking technology provided by nCUBE. The node contains sufficient network Input/Output to implement up to an order-13 binary hypercube. The benefit of this network, is that it scales linearly as more processors are added, and it is a superset of other commonly used interconnect topologies such as: meshes, rings, toroids, and trees. In this manner, a distributed processing network can be easily devised and supported. The SOBIEC node has sufficient memory for most multi-computer applications, and also supports external memory expansion and DMA interfaces. The SOBIEC node is supported by a mature set of software development tools from nCUBE. The nCUBE operating system (OS) provides configuration and operational support for up to 8000 SOBIEC processors in an order-13 binary hypercube or any subset or partition(s) thereof. The OS is UNIX (USL SVR4) compatible, with C, C++, and FORTRAN compilers readily available. A stand-alone development system is also available to support SOBIEC test and integration.

Eisenman, David↗

Toward lower-diameter large-scale HPC and data center networks with co-packaged optics

We investigate the advantages of using co-packaged optics for building low-diameter, large-scale high-performance computing (HPC) and data center networks. The increased escape bandwidth offered by co-packaged optics can enable high-radix switch implementations of more than 150 switch ports, which can be combined with data rates of up to 400 Gb/s per port. From the network architecture perspective, the key benefits of using co-packaged optics in future fat-tree networks include (a) the ability to implement large-scale topologies of > <#comment/> 11 , 000 end points by eliminating the need for a third switching layer and (b) the ability to provide up to 4 × <#comment/> higher bisection bandwidth compared to existing solutions, reducing at the same time the number of required switch application-specific integrated circuits by > <#comment/> 80 % <#comment/> . From the network operation perspective, both reduced energy consumption and lower packet delays can be achieved since fewer hops are required; i.e., packets need to traverse fewer serializer/deserializer lanes and fewer switch buffers, which reduces the probability of contending with other packets and improves the tolerance of network congestion. The performance of the proposed architecture is evaluated via discrete-event simulations for a wide range of representative HPC synthetic-traffic cases that include both hotspot and non-hotspot scenarios. The simulation results suggest that co-packaged optics form a promising solution to keep up with bandwidth scaling in future networks, while the reduced number of switching layers can lead to significant mean packet delay improvements that start from 30% and reach up to 74% for high-load conditions.

Maniotis, Pavlos (ORCID:0000000244905253)↗

Pore connectivity, electrical conductivity, and partial water saturation: Network simulations

Abstract The electrical conductivity of brine‐saturated rock is predominantly dependent on the geometry and topology of the pore space. When a resistive second phase (e.g., air in the vadose zone and oil/gas in hydrocarbon reservoirs) displaces the brine, the geometry and topology of the pore space occupied by the electrically conductive phase are changed. We investigated the effect of these changes on the electrical conductivity of rock partially saturated with brine. We simulated drainage and imbibition as invasion and bond percolation processes, respectively, in pipe networks assumed to be perfectly water‐wet. The simulations included the formation of a water film in the pipes invaded by the nonwetting fluid. During simulated drainage/imbibition, we measured the changes in resistivity index as well as a number of relevant microstructural parameters describing the portion of the pore space saturated with water. Except Euler topological number, all quantities considered here showed a significant level of “universality,” i.e., insensitivity to the type of lattice used (simple cubic, body‐centered cubic, or face‐centered cubic). Hence, the coordination number of the pore network appears to be a more effective measure of connectivity than Euler number. In general, the simulated resistivity index did not obey Archie's simple power law. In log‐log scale, the resistivity index curves displayed a substantial downward or upward curvature depending on the presence or absence of a water film. Our network simulations compared relatively well with experimental data sets, which were obtained using experimental conditions and procedures consistent with the simulations. Finally, we verified that the connectivity/heterogeneity model proposed by Bernabé et al. (2011) could be extended to the partial brine saturation case when water films were not present.

Li, M.↗

Criteria for Evaluating Alternative Network and Link Layer Protocols for the NASA Constellation Program Communication Architecture

Selecting a communications and network architecture for future manned space flight requires an evaluation of the varying goals and objectives of the program, development of communications and network architecture evaluation criteria, and assessment of critical architecture trades. This paper uses Cx Program proposed exploration activities as a guideline; lunar sortie, outpost, Mars, and flexible path options are described. A set of proposed communications network architecture criteria are proposed and described. They include: interoperability, security, reliability, and ease of automating topology changes. Finally a key set of architecture options are traded including (1) multiplexing data at a common network layer vs. at the data link layer, (2) implementing multiple network layers vs. a single network layer, and (3) the use of a particular network layer protocol, primarily IPv6 vs. Delay Tolerant Networking (DTN). In summary, the protocol options are evaluated against the proposed exploration activities and their relative performance with respect to the criteria are assessed. An architectural approach which includes (a) the capability of multiplexing at both the network layer and the data link layer and (b) a single network layer for operations at each program phase, as these solutions are best suited to respond to the widest array of program needs and meet each of the evaluation criteria.

Benbenek, Daniel↗

Hydrogen bond network and bond valence analysis on uranyl sulfate compounds with organic-based interstitial cations

Seven new uranyl sulfate compounds with organic charge-balancing cations have been synthesized and structurally characterized. The structural unit topologies of the two chains and five sheets have been previously reported in uranyl sulfate crystal chemistry, although they were synthesized using different organic molecules. With the inclusion of six of these structures to the 48 previously published uranyl sulfate compounds, a total of 54 known uranyl sulfate compounds with organic charge-balancing cations were compiled and analyzed. A graphical approach was used to compare the structural unit topologies, and a bond valence approach was used to quantify the hydrogen bond networks that exist between the interstitial cationic and solvent species to the uranyl sulfate anionic structural units. Finally, this analysis helped elucidate which oxygen atoms in the structural unit receive hydrogen bonds and how the organic cations stabilize the overall crystal structures in this subclass of U(VI) materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Topology Reconfiguration of Boltzmann Machines on Quantum Annealers

Boltzmann machines have useful roles in deep learning applications, such as generative data modeling, initializing weights for other types of networks, or extracting efficient representations from high-dimensional data. Most Boltzmann machines use restricted topologies that exclude looping connectivity, as such connectivity creates complex distributions that are difficult to sample. We have used an open-system quantum annealer to sample from complex distributions and implement Boltzmann machines with looping connectivity. Further, we have created policies mapping Boltzmann machine variables to the quantum bits of an annealer. These policies, based on correlation and entropy metrics, dynamically reconfigure the topology of Boltzmann machines during training and improve performance.

Liu, Jeremy (ORCID:0000000172299417)↗

Search for the Standard Model Higgs boson in the missing energy topology with DØ

A search for the Standard Model Higgs boson in the missing energy and acoplanar b-jet topology is reported, using an integrated luminosity of 0.93 fb -1 recorded by the D0 detector at the Fermilab Tevatron p$\bar{p}$ Collider. The analysis includes signal contributions from p$\bar{p}$ → ZH → v$\bar{v}$b$\bar{b}$, as well as from WH production in which the charged lepton from the W boson decay is undetected. Neural networks are used to separate signal from background. In the absence of a signal, limits are set on σ(p$\bar{p}$ → VH) x B(H → b$\bar{b}$) at the 95% C.L. of 2.6-2.3 pb, for Higgs boson masses in the range 105-135 GeV, where V = W, Z. The corresponding expected limits range from 2.8 to 2.0 pb. Potential improvements to the analysis with an extended dataset totalling 4 fb -1 are also discussed. Essential maintenance related to the increased luminosity and RunIIb upgrade was carried out on the impact parameter (IP) based b-tagging trigger tool and the effect of the changes on the b-tagger's performance was investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A new generic method for the semi-automatic extraction of river and road networks in low and mid-resolution satellite images

This paper addresses the problem of semi-automatic extraction of road or hydrographic networks in satellite images. For that purpose, we propose an approach combining concepts arising from mathematical morphology and hydrology. The method exploits both geometrical and topological characteristics of rivers/roads and their tributaries in order to reconstruct the complete networks. It assumes that the images satisfy the following two general assumptions, which are the minimum conditions for a road/river network to be identifiable and are usually verified in low- to mid-resolution satellite images: (i) visual constraint: most pixels composing the network have similar spectral signature that is distinguishable from most of the surrounding areas; (ii) geometric constraint: a line is a region that is relatively long and narrow, compared with other objects in the image. While this approach fully exploits local (roads/rivers are modeled as elongated regions with a smooth spectral signature in the image and a maximum width) and global (they are structured like a tree) characteristics of the networks, further directional information about the image structures is incorporated. Namely, an appropriate anisotropic metric is designed by using both the characteristic features of the target network and the eigen-decomposition of the gradient structure tensor of the image. Following, the geodesic propagation from a given network seed with this metric is combined with hydrological operators for overland flow simulation to extract the paths which contain most line evidence and identify them with the target network.

47 OTHER INSTRUMENTATION↗

Learning the factors controlling mineral dissolution in three-dimensional fracture networks: applications in geologic carbon sequestration

We perform a set of high-fidelity simulations of geochemical reactions within three-dimensional discrete fracture networks (DFN) and use various machine learning techniques to determine the primary factors controlling mineral dissolution. The DFN are partially filled with quartz that gradually dissolves until quasi-steady state conditions are reached. At this point, we measure the quartz remaining in each fracture within the domain as our primary quantity of interest. We observe that a primary sub-network of fractures exists, where the quartz has been fully dissolved out. This reduction in resistance to flow leads to increased flow channelization and reduced solute travel times. However, depending on the DFN topology and the rate of dissolution, we observe substantial variability in the volume of quartz remaining within fractures outside of the primary subnetwork. This variability indicates an interplay between the fracture network structure and geochemical reactions. We characterize the features controlling these processes by developing a machine learning framework to extract their relevant impact. Specifically, we use a combination of high-fidelity simulations with a graph-based approach to study geochemical reactive transport in a complex fracture network to determine the key features that control dissolution. We consider topological, geometric and hydrological features of the fracture network to predict the remaining quartz in quasi-steady state. We found that the dissolution reaction rate constant of quartz and the distance to the primary sub-network in the fracture network are the two most important features controlling the amount of quartz remaining. This study is a first step towards characterizing the parameters that control carbon mineralization using an approach with integrates computational physics and machine learning.

54 ENVIRONMENTAL SCIENCES↗

Relations between environmental noise and electronic coupling for optimal exciton transfer in one- and two-dimensional homogeneous and inhomogeneous quantum systems

Recent studies have indicated that environmental noise may increase energy-transfer efficiency in quantum systems. For homogeneous networks of chromophores previous studies have primarily considered excitonic transport in one-dimensional (linear) networks. In our study, we expand previous research to a two-dimensional fully coupled topology of chromophore molecules. We demonstrate that not only does an optimal dephasing rate exist in both one- and two-dimensional networks but also that it increases in magnitude with increasing coupling strength between chromophores. Optimal transport occurs when the noise quenches the entanglement between local modes that prevent the exciton from moving efficiently to the target site. We find that these results are insensitive to minor site defects such as those found in realistic systems. We contrast these findings to systems with a high degree of inhomogeneity, in which the optimal dephasing rate is largely set by the system topology and does not vary significantly with respect to coupling strength. Our findings have potential applications to systems such as quantum dot arrays and carbon nanotube structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗