Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Measurement error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Revised depolarization corrections for atmospheric extinction

Possible sources of errors in depolarization data are analyzed with special reference to the rotational Raman contribution to the optical depth. It is shown that the depolarization data now available are so accurate that their uncertainty affects the calculated Rayleigh optical depth by less than 1%, and consequently, the anomalously low extinctions occasionally reported must be due to systematic errors of measurement rather than errors in the Rayleigh optical depths.

Young, A. T.↗
NASA NTRS1980

Navigation errors encountered using weather-mapping radar for helicopter IFR guidance to oil rigs

In 1978 a joint NASA-FAA helicopter flight test was conducted to examine the use of weather-mapping radar for IFR guidance during landing approaches to oil rig helipads. The following navigation errors were measured: total system error, radar-range error, radar-bearing error, and flight technical error. Three problem areas were identified: (1) operational problems leading to pilot blunders, (2) poor navigation to the downwind final approach point, and (3) pure homing on final approach. Analysis of these problem areas suggests improvement in the radar equipment, approach procedure, and pilot training, and gives valuable insight into the development of future navigation aids to serve the off-shore oil industry.

Phillips, J. D.↗
NASA NTRS1986

Mass spectrometric study of the mercury isotopes in the Allende meteorite

Isotopic abundance ratios for mercury were determined by mass spectrometry in six samples of bulk material and in one sample of chondrules from the Allende meteorite. A primary purpose of the work was to attempt to verify the anomalous ratios reported for Hg-196/Hg-202 by neutron activation. Measurements were made on the mercury released at temperatures of 250, 450, 600 C, and in some cases, higher temperatures. The precision of the measurements was such that if an anomaly of the magnitude reported exists, it should have been seen. The isotopic abundance ratios for the other mercury isotopes were also measured. Within the errors of measurement these agreed with normal terrestrial values.

Nier, A. O.↗
NASA NTRS1993

A critical analysis of the accuracy of several numerical techniques for combustion kinetic rate equations

A detailed analysis of the accuracy of several techniques recently developed for integrating stiff ordinary differential equations is presented. The techniques include two general-purpose codes EPISODE and LSODE developed for an arbitrary system of ordinary differential equations, and three specialized codes CHEMEQ, CREK1D, and GCKP4 developed specifically to solve chemical kinetic rate equations. The accuracy study is made by application of these codes to two practical combustion kinetics problems. Both problems describe adiabatic, homogeneous, gas-phase chemical reactions at constant pressure, and include all three combustion regimes: induction, heat release, and equilibration. To illustrate the error variation in the different combustion regimes the species are divided into three types (reactants, intermediates, and products), and error versus time plots are presented for each species type and the temperature. These plots show that CHEMEQ is the most accurate code during induction and early heat release. During late heat release and equilibration, however, the other codes are more accurate. A single global quantity, a mean integrated root-mean-square error, that measures the average error incurred in solving the complete problem is used to compare the accuracy of the codes. Among the codes examined, LSODE is the most accurate for solving chemical kinetics problems. It is also the most efficient code, in the sense that it requires the least computational work to attain a specified accuracy level. An important finding is that use of the algebraic enthalpy conservation equation to compute the temperature can be more accurate and efficient than integrating the temperature differential equation.

Radhadrishnan, Krishnan↗
NASA NTRS2005

Research Supporting Satellite Communications Technology

This report describes the second year of research effort under the grant Research Supporting Satellite Communications Technology. The research program consists of two major projects: Fault Tolerant Link Establishment and the design of an Auto-Configurable Receiver. The Fault Tolerant Link Establishment protocol is being developed to assist the designers of satellite clusters to manage the inter-satellite communications. During this second year, the basic protocol design was validated with an extensive testing program. After this testing was completed, a channel error model was added to the protocol to permit the effects of channel errors to be measured. This error generation was used to test the effects of channel errors on Heartbeat and Token message passing. The C-language source code for the protocol modules was delivered to Goddard Space Flight Center for integration with the GSFC testbed. The need for a receiver autoconfiguration capability arises when a satellite-to-ground transmission is interrupted due to an unexpected event, the satellite transponder may reset to an unknown state and begin transmitting in a new mode. During Year 2, we completed testing of these algorithms when noise-induced bit errors were introduced. We also developed and tested an algorithm for estimating the data rate, assuming an NRZ-formatted signal corrupted with additive white Gaussian noise, and we took initial steps in integrating both algorithms into the SDR test bed at GSFC.

Horan Stephen↗
NASA NTRS1951

Error in Airspeed Measurement Due to Static-Pressure Field Ahead of the Wing Tip of a Swept-Wing Airplane Model at Transonic Speeds

As part of a study of means of airspeed measurement at transonic speeds the use of static orifices located ahead of the wing tip has been investigated for possible application to service or research airspeed installations. The local static pressure and local Mach number have been measured at a distance of 1 tip chord ahead of the wing tip of a model of a swept-wing fighter airplane at true Mach numbers between 0.7 and 1.08 by the NACA wing-flow method. All measurements were made at or near zero lift. The local Mach number was found to be essentially equal to the true Mach numbers less than about 0.90. The local Mach number was found to be about 0.97 at a true Mach number of 0.95, and to be about 1.04 at a true Mach number of 1.08. The local Mach number provided a reasonable sensitive measure of true Mach number except for a restricted region near a true Mach number of 1.0 where the local Mach number did not change appreciably with true Mach number. The linear theory was found to predict qualitatively the effect of the fuselage on the static pressure ahead of the wing time but gave a reasonable prediction of the effect of the wing on the static pressure only at Mach numbers below 0.95.

Danforth, Edward C.B.↗
NASA NTRS1970

Multipath errors in range rate measurement by a TDRS/VHF - GRARR

Range rate errors due to multipath reflection are calculated for a tracking and data relay satellite system using the VHF Goddard range and range rate (GRARR) system. At VHF the reflection is primarily specular, and the strength of the multipath relative to the direct path can be modeled in terms of the geometry and the surface characteristics, specifically the root-mean-square (rms) ocean wave height. The uplink and downlink multipath introduces phase jitter on the GRARR carrier and subcarrier. The derivation of these effects is reviewed leading to an expression for the rms range rate error. The derivation assumed the worst-case orbital configurations in which there was very little relative specular Doppler. This means that the specular multipath interference was not attenuated by the carrier and subcarrier PLL transfer functions. Curves of range rate error are presented as a function of grazing angle with wave height 0.3 to 0.7 meters and spacecraft altitude 100 to 700 miles as parameters.

Sohn, S. J.↗
NASA NTRS1986

Error propagation in a digital avionic processor: A simulation-based study

An experimental analysis to study error propagation from the gate to the chip level is described. The target system is the CPU in the Bendix BDX-930, an avionic miniprocessor. Error activity data for the study was collected via a gate-level simulation. A family of distributions to characterize the error propagation, both within the chip and at the pins, was then generated. Based on these distributions, measures of error propagation and severity were defined. The analysis quantifies the dependency of the measured error propagation on the location of the fault and the type of instruction/microinstruction executed.

Lomelino, D.↗
NASA NTRS1974

Errors induced in the measurement and azimuth directions of morphological features imaged on oblique Lunar Orbiter photographs

Many quantitative lunar studies, e.g., the morphology and dimensions of craters, crater density and distribution, have been performed using oblique Lunar Orbiter photographs. If the inherent change in scale and azimuth direction of features imaged on these photographs are not corrected, the measurement can be in considerable error and the resulting statistical inferences may be invalid. The magnitude of this error is dependent upon: the depression angle of the camera, the flight height of the spacecraft, the focal length of the camera, and the position and orientation of the object on the ground. The errors introduced by using unrectified oblique photographs as though they were vertical photographs are examined for several Lunar Orbiter high resolution NASA LRC Enhancement photographic prints taken at various depression angles.

Siegal, B. S.↗