Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Matrix elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Performance analysis of structured gradient algorithm

The structured gradient algorithm uses a structured estimate of the array correlation matrix (ACM) to estimate the gradient required for the constrained least-mean-square (LMS) algorithm. This structure reflects the structure of the exact array correlation matrix for an equispaced linear array and is obtained by spatial averaging of the elements of the noisy correlation matrix. In its standard form the LMS algorithm does not exploit the structure of the array correlation matrix. The gradient is estimated by multiplying the array output with the receiver outputs. An analysis of the two algorithms is presented to show that the covariance of the gradient estimated by the structured method is less sensitive to the look direction signal than that estimated by the standard method. The effect of the number of elements on the signal sensitivity of the two algorithms is studied.

Godara, Lal C.↗
NASA NTRS1975

Dispersion analysis techniques within the space vehicle dynamics simulation program

The Space Vehicle Dynamics Simulation (SVDS) program was evaluated as a dispersion analysis tool. The Linear Error Analysis (LEA) post processor was examined in detail and simulation techniques relative to conducting a dispersion analysis using the SVDS were considered. The LEA processor is a tool for correlating trajectory dispersion data developed by simulating 3 sigma uncertainties as single error source cases. The processor combines trajectory and performance deviations by a root-sum-square (RSS process) and develops a covariance matrix for the deviations. Results are used in dispersion analyses for the baseline reference and orbiter flight test missions. As a part of this study, LEA results were verified as follows: (A) Hand calculating the RSS data and the elements of the covariance matrix for comparison with the LEA processor computed data. (B) Comparing results with previous error analyses. The LEA comparisons and verification are made at main engine cutoff (MECO).

Snow, L. S.↗
NASA NTRS1992

Statistical properties of the Mueller matrix of distributed targets

Attention is given to the statistical properties of the Mueller matrix of distributed targets, with emphasis on the copolarized phase angle phi sub c. The latter is shown to exhibit a pdf that is characterized completely by two parameters alpha and zeta, both of which are related to the elements of the Mueller matrix of the target. The parameter alpha governs the width of the pdf, and zeta governs the mean value of phi sub c. It is shown that the magnitudes S sub vv, S sub hh, and S sub hv, and the parameters alpha and zeta completely specify the Mueller matrix, and therefore contain all the statistical information available from the polarimetric backscatter response of the target. These results are verified with experimental observations that show that alpha and zeta are related to the physical and dielectric properties of soil and vegetation targets.

Ulaby, F. T.↗
NASA NTRS2014

Line Interference Effects Using a Refined Robert-Bonamy Formalism: the Test Case of the Isotropic Raman Spectra of Autoperturbed N2

A symmetrized version of the recently developed refined Robert-Bonamy formalism [Q. Ma, C. Boulet, and R. H. Tipping, J. Chem. Phys. 139, 034305 (2013)] is proposed. This model takes into account line coupling effects and hence allows the calculation of the off-diagonal elements of the relaxation matrix, without neglecting the rotational structure of the perturbing molecule. The formalism is applied to the isotropic Raman spectra of autoperturbed N2 for which a benchmark quantum relaxation matrix has recently been proposed. The consequences of the classical path approximation are carefully analyzed. Methods correcting for effects of inelasticity are considered. While in the right direction, these corrections appear to be too crude to provide off diagonal elements which would yield, via the sum rule, diagonal elements in good agreement with the quantum results. In order to overcome this difficulty, a re-normalization procedure is applied, which ensures that the off-diagonal elements do lead to the exact quantum diagonal elements. The agreement between the (re-normalized) semi-classical and quantum relaxation matrices is excellent, at least for the Raman spectra of N2, opening the way to the analysis of more complex molecular systems.

nitrogen↗
NASA NTRS2017

Simulating Matrix Crack and Delamination Interaction in a Clamped Tapered Beam

Blind predictions were conducted to validate a discrete crack methodology based on the Floating Node Method to simulate matrix-crack/delamination interaction. The main novel aspects of the approach are: (1) the implementation of the floating node method via an 'extended interface element' to represent delaminations, matrix-cracks and their interaction, (2) application of directional cohesive elements to infer overall delamination direction, and (3) use of delamination direction and stress state at the delamination front to determine migration onset. Overall, good agreement was obtained between simulations and experiments. However, the validation exercise revealed the strong dependence of the simulation of matrix-crack/delamination interaction on the strength data (in this case transverse interlaminar strength, YT) used within the cohesive zone approach applied in this work. This strength value, YT, is itself dependent on the test geometry from which the strength measurement is taken. Thus, choosing an appropriate strength value becomes an ad-hoc step. As a consequence, further work is needed to adequately characterize and assess the accuracy and adequacy of cohesive zone approaches to model small crack growth and crack onset. Additionally, often when simulating damage progression with cohesive zone elements, the strength is lowered while keeping the fracture toughness constant to enable the use of coarser meshes. Results from the present study suggest that this approach is not recommended for any problem involving crack initiation, small crack growth or multiple crack interaction.

De Carvalho, N. V.↗
NASA NTRS1982

Optimum damping locations for structural vibration control

A technique for determining the optimum damper locations and damping rates for a flexible structure has been developed. Using a nonlinear-mathematical-programming algorithm, a diagonal damping matrix is determined such that specified modes have a prescribed modal damping ratio. The design objective is to minimize the total damping effort while constraining the modal damping ratio to be equal or greater than the prescribed amount. Additional constraints require the diagonal elements of the damping matrix to be positive which guarantees that all modes of the damped system will be stable. Results are shown for a uniform free-free beam.

Horner, G. C.↗
NASA NTRS1984

Optical matrix-matrix multiplication method demonstrated by the use of a multifocus hololens

A method of optical matrix-matrix multiplication is presented. The feasibility of the method is also experimentally demonstrated by the use of a dichromated-gelatin multifocus holographic lens (hololens). With the specific values of matrices chosen, the average percentage error between the theoretical and experimental data of the elements of the output matrix of the multiplication of some specific pairs of 3 x 3 matrices is 0.4 percent, which corresponds to an 8-bit accuracy.

Liu, H. K.↗
NASA NTRS2004

Experiences on p-Version Time-Discontinuous Galerkin's Method for Nonlinear Heat Transfer Analysis and Sensitivity Analysis

The focus of this research is on the development of analysis and sensitivity analysis equations for nonlinear, transient heat transfer problems modeled by p-version, time discontinuous finite element approximation. The resulting matrix equation of the state equation is simply in the form ofA(x)x = c, representing a single step, time marching scheme. The Newton-Raphson's method is used to solve the nonlinear equation. Examples are first provided to demonstrate the accuracy characteristics of the resultant finite element approximation. A direct differentiation approach is then used to compute the thermal sensitivities of a nonlinear heat transfer problem. The report shows that only minimal coding effort is required to enhance the analysis code with the sensitivity analysis capability.

Hou, Gene↗
NASA NTRS2016

Thermomechanical and Environmental Durability of Environmental Barrier Coated Ceramic Matrix Composites Under Thermal Gradients

This paper presents the developments of thermo-mechanical testing approaches and durability performance of environmental barrier coatings (EBCs) and EBC coated SiCSiC ceramic matrix composites (CMCs). Critical testing aspects of the CMCs will be described, including state of the art instrumentations such as temperature, thermal gradient, and full field strain measurements; materials thermal conductivity evolutions and thermal stress resistance; NDE methods; thermo-mechanical stress and environment interactions associated damage accumulations. Examples are also given for testing ceramic matrix composite sub-elements and small airfoils to help better understand the critical and complex CMC and EBC properties in engine relevant testing environments.]

Enviornmental Barrier Coatings↗
DOE OSTI2023

Using angular two-point correlations to self-calibrate the photometric redshift distributions of DECaLS DR9

Calibrating the redshift distributions of photometric galaxy samples is essential in weak lensing studies. The self-calibration method combines angular auto- and cross-correlations between galaxies in multiple photometric redshift (photo-z) bins to reconstruct the scattering rates matrix between redshift bins. In this paper, we test a recently proposed self-calibration algorithm using the DECaLS Data Release 9 and investigate to what extent the scattering rates are determined. We first mitigate the spurious angular correlations due to imaging systematics by a machine learning based method. We then improve the algorithm for χ 2 minimization and error estimation. Finally, we solve for the scattering matrices, carry out a series of consistency tests, and find reasonable agreements: (1) finer photo-z bins return a high-resolution scattering matrix, and it is broadly consistent with the low-resolution matrix from wider bins; (2) the scattering matrix from the Northern Galactic Cap is almost identical to that from Southern Galactic Cap; (3) the scattering matrices are in reasonable agreement with those constructed from the power spectrum and the weighted spectroscopic subsample. We also evaluate the impact of cosmic magnification. Although it changes little the diagonal elements of the scattering matrix, it affects the off-diagonals significantly. The scattering matrix also shows some dependence on scale cut of input correlations, which may be related to a known numerical degeneracy between certain scattering pairs. In conclusion, this work demonstrates the feasibility of the self-calibration method in real data and provides a practical alternative to calibrate the redshift distributions of photometric samples.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Gramian-Based Characterization of Network Vulnerability to Nodal Impulse Inputs: Preprint

Impulsive inputs applied at influential nodes of a network system may result in undesirable behavior and degrade performance. This paper proposes the notion of vulnerability matrix (VM) to characterize the effect of impulse inputs on a network following either discrete-time or continuous-time dynamics. The VM describes the first-order effects of impulse inputs on edge flows and is based on the controllability Gramian. We provide explicit expressions for the elements of the vulnerability matrix for the class of directed line networks in terms of the edge weights. Simulations validate our results and highlight the utility of the proposed metric in capturing the transient effects of nodal impulse inputs on edge flows.

controllability Gramian↗
DOE OSTI2020

Standard versus non-standard CP phases in neutrino oscillation in matter with non-unitarity

We formulate a perturbative framework for the flavor transformation of the standard active three neutrinos but with a non-unitary flavor mixing matrix, a system which may be relevant for the leptonic unitarity test. We use the $\alpha$ parametrization of the non-unitary matrix and take its elements $\alpha_{\beta \gamma}$ ($\beta,\gamma = e,\mu,\tau$) and the ratio $\epsilon \simeq \Delta m^2_{21} / \Delta m^2_{31}$ as the small expansion parameters. Two qualitatively new features that hold in all the oscillation channels are uncovered in the probability formula obtained to first order in the expansion: (1) The phases of the complex $\alpha$ elements always come into the observable in the particular combination with the $\nu$SM CP phase $\delta$ in the form $[e^{- i \delta } \bar{\alpha}_{\mu e}, ~e^{ - i \delta} \bar{\alpha}_{\tau e}, ~\bar{\alpha}_{\tau \mu}]$ under the Particle Data Group convention of a unitary $\nu$SM mixing matrix. (2) The diagonal $\alpha$ parameters appear in particular combinations $\left( a/b - 1 \right) \alpha_{ee} + \alpha_{\mu \mu}$ and $\alpha_{\mu \mu} - \alpha_{\tau \tau}$, where $a$ and $b$ denote, respectively, the matter potential due to charged current and neutral current reactions. This property holds only in the unitary evolution part of the probability, and there is no such feature in the genuine non-unitary part, while the $\delta$–$\alpha$ parameter phase correlation exists for both. The reason for such remarkable stability of the phase correlation is discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

A Physics-Based Data-Driven Approach for Modeling of Environmental Degradation in Elastomers

Abstract Elastomers are now commonly used in a number of industries, including aerospace, structure, transportation, shipbuilding, and automotive, due to their excellent workability, formability, and flexibility. During their activity, elastomers are subjected to harsh environmental conditions, which decreases their resilience. False predictions made early in their lives can have major financial and environmental implications. Elastomers’ performance and properties, such as strength, durability, and density, are influenced by chemical changes in these materials, known as degradation, which occurs over time. This process can alter the morphology of a polymer matrix as well as cause chain scission and cross-linking, resulting in different behaviors than that of the unaged material. To demonstrate the effect of thermaloxidative aging on the mechanical behavior of elastomers, several experimental and theoretical models have been proposed. In view of the large volume of experimental data available on micro-structural evolution in the course of aging, we propose a physics-based data-driven approach to overcome the shortcomings of both phenomenological and micro-mechanical models. This work presents a novel thermodynamically consistent, multiagent machine-learned model for predicting the constitutive behavior of cross-linked elastomers during environmental aging, such as thermo-oxidative and hydrolytic aging for various states of deformation. Single mechanism degradation changes the polymer matrix over time where it is causing chain scission, reduction of cross-links, and morphology change. To capture the idealized Mullins effect and permanent set due to the effect of single aging mechanisms on nonlinear mechanical responses of elastomers, we propose a data-driven model for simulating inelastic elements in a polymer matrix. By using a sequential order reduction, we were able to reduce the 3D stress-strain tensor mapping problem to a small number of super-constrained 1D mapping problems. To systematically classify such mapping problems into a few categories, an assembly of multiple replicated conditional neural network learning agents (L-agents) is used based on our recent work. Each category is represented by a different type of agent. The effect of deformation history, aging time, and aging temperature is captured by this model. The model is validated using a broad collection of data, ranging from our experimental results to data from the literature. In addition, thermodynamic consistency and frame independence are investigated. The most significant achievements of this model are its precision, simplicity, and prediction of inelasticity under various states of deformation. The model’s accuracy and simplicity make it a good option for commercial and industrial applications. Conveniently, due to the model modular nature, it can be expanded in the future to include viscoelasticity and non-isotropic formation for better precision.

Ghaderi, Aref↗
NASA NTRS1975

A triangular thin shell finite element: Linear analysis

The formulation of the linear stiffness matrix for a doubly-curved triangular thin shell element, using a modified potential energy principle, is described. The strain energy component of the potential energy is expressed in terms of displacements and displacement gradients by use of consistent Koiter strain-displacement equations. The element inplane and normal displacement fields are approximated by complete cubic polynomials. The interelement displacement admissibility conditions are met in the global representation by imposition of constraint conditions on the interelement boundaries; the constraints represent the modification of the potential energy. Errors due to the nonzero strains under rigid body motion are shown to be of small importance for practical grid refinements through performance of extensive comparison analyses.

Thomas, G. R.↗
DOE OSTI2021

Parametrizations of the spin density matrix

Highlights: • Proposed two methods for parametrizing the SDM of spinning, unstable particles. • All non-negativity conditions fulfilled; adaptability to various constraints. • First method: based on a theorem; applicable in a simple and flexible way. • Second method: particularly suitable for especial conditions. • Applications: two of them interesting in the search for new physics. We propose for the spin density matrix two parametrizations which automatically fulfill the non-negativity conditions, without setting any bound on the parameters. The first one relies on a theorem, that we prove, and it is rather simple and easily adaptable to some specific reactions, where, for example, parity is conserved or angular momentum conservation entails selection rules. Moreover, in the case when the rank is less than the order of the density matrix, we show how to improve the fits to the data, either by implementing previous suggestions, or by elaborating an alternative method, for which we prove a second theorem. Our second parametrization is a variant of previous treatments, it appears suitable for some particular processes. Moreover, we discuss about the possibility of inferring the elements of the density matrix from the differential decay width. Last, we illustrate various examples of current interest, both in strong and weak decays; some of them may be helpful in the investigation of physics beyond the standard model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Microstructural analysis of tristructural isotropic particles in high-temperature steam mixed gas atmospheres

High-temperature gas-cooled reactors (HTGRs) use tristructural isotropic (TRISO) particles embedded in a graphitic matrix material to form the integral fuel element. Potential off-normal reactor conditions for HTGRs include steam ingress with temperatures above 1,000 °C. Fuel element exposure to steam can cause the graphitic matrix material to evolve, forming an atmosphere composed of oxidants and oxidation products and potentially exposing the TRISO particles to these conditions. Investigating the oxidation response of TRISO particles exposed to a mixed gas atmosphere will provide insight into the stability under off-normal conditions. In this study, surrogate TRISO particles were exposed to high temperatures (T = 1,200 °C) in flowing steam (3% < pH 2 O < 21%) and CO (pCO < 1%) to determine the oxidation behavior of the SiC layer when exposed to various mixed gas atmospheres. Scanning electron microscopy, x-ray diffraction, and focused ion beam milling was used to determine the impact of CO and steam on the oxidation behavior of the SiC layer. Therefore, the data presented demonstrates how the SiC layer showed strong oxidation resistance due to limited SiO 2 growth and maintained its structural integrity under these off-normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1972

Speed in Information Processing with a Computer Driven Visual Display in a Real-time Digital Simulation

Information transfer between the operator and computer-generated display systems is an area where the human factors engineer discovers little useful design data relating human performance to system effectiveness. This study utilized a computer-driven, cathode-ray-tube graphic display to quantify human response speed in a sequential information processing task. The performance criteria was response time to sixteen cell elements of a square matrix display. A stimulus signal instruction specified selected cell locations by both row and column identification. An equal probable number code, from one to four, was assigned at random to the sixteen cells of the matrix and correspondingly required one of four, matched keyed-response alternatives. The display format corresponded to a sequence of diagnostic system maintenance events, that enable the operator to verify prime system status, engage backup redundancy for failed subsystem components, and exercise alternate decision-making judgements. The experimental task bypassed the skilled decision-making element and computer processing time, in order to determine a lower bound on the basic response speed for given stimulus/response hardware arrangement.

Kyle, R. G.↗
NASA NTRS1991

Superelement methods in high temperature metal matrix composites

A study into fiber fracture and debonding in metal matrix composites is conducted using the finite element method. The superelement finite element technique was used to model a metal matrix composite under various loading condition and with varying degrees of fiber debonding. The use of superelement saved many man hours by allowing for alteration of only the primary superelement to manipulate partial bonding for the entire model. The composite's material properties were calculated and the effects of fiber debonding on these properties were noted. The internal stress state of the composite while under various loads was also studied. Special interest was devoted to the change in stress state as a result of increasing fiber debonding.

Trowbridge, Daniel↗