Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Materials characterization techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Characterizing Dynamic Structure in Battery Electrodes by Time-Resolved Cryo-TEM

In recent years, cryogenic transmission electron microscopy (cryo-TEM) has enabled high-resolution characterization of sensitive battery materials by minimizing electron beam-induced artifacts and damage. Success of this technique relies on the preparation of thin, rapidly frozen samples, generally by disassembling batteries under inert atmosphere, transferring materials of interest to a TEM grid, and finally plunge freezing into a cryogen. In material degradation studies, this extensive time between electrochemical cycling and cryo-TEM characterization leaves room for structural relaxation, diffusion, and other dynamic processes that make it difficult to precisely correlate the imaged structure with the native structure that evolves during battery cycling or aging. Here, we present a method to integrate battery cycling with fast preparation of electrode samples for cryo-TEM. This enables higher fidelity between the structures characterized and the electrochemical state of interest, which we use to study deformation in silicon nanoparticle anodes for lithium-ion batteries.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗

ODS Thin-wall Cladding Joining Technique Development

ABSTRACT The oxide dispersion strengthened (ODS) materials are typically fabricated by powder mechanical alloying to form uniform distribution of high concentration nanometer size oxide particles for exceptional high temperature mechanical strength and enhanced radiation tolerance. This report summarizes the recent development on the weld techniques of joining the ODS cladding to the endplug as a part of accident tolerant fuels (ATF) program for both advanced light water reactor (LWR) and advanced fuel cycle (AFC) with fast reactor fuel cladding. It is crucial for the weld of ODS material to maintain the uniform distribution and fine size of oxide particles in the matrix. Pressure Resistance Weld (PRW) is a solid state joining technique without melting therefore a preferred joining technique for ODS materials. Samples joined with PRW were pressure burst tested. Detailed microstructural characterization in this work includes non-destructive 3D x-ray ?m-resolution computer-tomography (?-CT), optical microscopy, SEM/EBSD for grain-orientation-mapping, TEM, STEM/ASTAR for high resolution grain orientation and phase mapping, and APT for high-resolution 3D composition analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low-cost & Energy Dense Batteries for Transportation

The project sought to explore development of novel polymer separator materials and additives for Li-S and Li-ion batteries that would solve critical failure modes and performance bottlenecks for these chemistries. This technology presented significant advanced manufacturing challenges and opportunities in getting to scale, including materials synthesis scale-up, large-area polymer processing techniques, electrode formulation, and the development of coin and pouch cells for electrochemical energy storage. Specific accomplishments included synthesis of organic molecular and polymer materials designed to solve outstanding challenges in electrochemical cells. The primary focus of new materials design was aimed at improving longevity, power, cost reduction, and environmental sustainability of said electrochemical devices. The project also involved assembly and characterization of electrochemical devices with standard galvanostatic and potentiostatic techniques as well as electrochemical impedance spectroscopy.

25 ENERGY STORAGE↗

Non-destructive structural characterization of graphite components using mechanical resonance and deep learning

As compared to conventional nuclear reactors, microreactors have the potential to significantly reduce construction timelines and capital costs, decreasing the barriers for advanced nuclear reactor technologies. However, the lower power output of these microreactors (typically < 20 MWe) creates challenging economics if operation and maintenance costs cannot be sufficiently reduced. The compact size of these designs presents an opportunity for comprehensive in-situ structural health monitoring to provide real-time feedback in order to reduce operational costs associated with maintenance and downtime. Many microreactor concepts use graphite for both in-core neutron moderation and as a structural material, which has typically required some form of periodic and laborious inspection. This report provides a description and assessment of recent work with graphite to couple acoustic-based experimental measurements and characterization with machine learning models to mature structural health monitoring capabilities and generate benefits for the nuclear microreactor industry. With resilient embedded sensors in development in other programs funded by the US Department of Energy’s Office of Nuclear Energy and elsewhere, the work described herein builds upon previously funded efforts to mature non-destructive testing technology that relates measured vibrational signatures to structural changes, using a combination of new experimental measurements and machine learning processing. Building on past successful demonstrations of predictive workflows to identify structural changes in a hexagonal stainless steel test article with excellent acoustic propagation, we first performed baseline characterization on graphite samples with canonical geometries to ensure compatibility and confidence in the applied techniques for a material with distinctly different mechanical properties. In contrast to efforts in previous years, we worked exclusively with unidirectional vibration data that is more comparable to those expected from the existing embedded sensor technologies which are suitable for deployment in a reactor setting. Established acoustic and modern machine-learning-based characterization approaches were applied to the resulting datasets from these simple geometries. Both approaches were found to be highly capable of detecting even small geometric irregularities amongst nominally identical samples. As such, we then moved to testing these approaches for detection of artificial local stress perturbations introduced into a more complex geometry: a hexagonal block with drilled holes. A main outcome of this work is that a generalizable ML workflow can be used to detect and predict the characteristics of small artificial anomalies in a graphite component with a relevant geometry. While this work was performed using surficial vibration data, we expect the approach to be flexible and viable for other monitoring scenarios, such as those with different arrangements or types of sensor arrays. As compared to previously funded efforts, an existing ML workflow based on neural networks was enhanced through the addition of recently developed Fourier neural operators. As applied to previously collected and new vibration datasets, prediction accuracies of anomaly characterizations were greatly improved with minimal added computational cost. As trained on small durations of vibration data (tens of seconds) collected over a realistic number of locations, the model was able to reliably determine the presence of a subtle stress anomaly and begin to provide location estimates. Such an approach is likely to be viable for more relevant reactor damage scenarios for graphite components, such as progressive crack growth or creep.

36 MATERIALS SCIENCE↗

Mechanical Performance of Additively Manufactured ODS 316L and 316H Stainless Steels

This work package within the Advanced Materials and Manufacturing Technologies (AMMT) program focused on the mechanical and microstructural characterization of oxide dispersion strengthened (ODS) stainless steels produced using advanced manufacturing techniques. The research aimed to identify an accelerated development path for ODS alloys by integrating additive manufacturing (AM) technologies with recent advancements in ODS materials and traditional manufacturing methods. For FY 24, the research specifically targeted exploring an accelerated development path for ODS alloys by combining AM technologies with these advancements. Novel AM and post-build processing routes were developed for ODS austenitic alloys, including Fe-Cr-Ni alloys such as 316L and 316H. Electron microscopy and mechanical characterizations were conducted to evaluate the impact of process variables on microstructure and properties, with the goal of optimizing these properties economically. Traditionally, producing ODS alloys involves multi-day, high-energy mechanical milling of alloy powder with yttria powder, followed by milled-powder consolidation through extrusion or other methods, and additional thermomechanical processing (TMP) for property control. To overcome the challenges associated with this complex and costly approach, we propose exploring alternative, cost-effective processing routes that emphasize AM and traditional TMP methods. The new processing routes for ODS alloys have achieved significantly higher strengths—several times greater than those of wrought stainless steels—while maintaining substantial ductility and fracture toughness. This report outlines the novel and economical AM-based processing routes for ODS austenitic alloys, combined with post-build TMPs, and discusses the mechanical and microstructural characteristics of the developed materials.

36 MATERIALS SCIENCE↗

Growth and characterization of binary and pseudo-binary 3-5 compounds exhibiting non-linear optical behavior. Undergraduate research opportunities in microgravity science and technology

In line with the specified objectives, a Bridgman-type growth configuration in which unavoidable end effects - conventionally leading to growth interface relocation - are compensated by commensurate input-power changes is developed; the growth rate on a microscale is predictable and unaffected by changes in heat transfer conditions. To permit quantitative characterization of the growth furnace cavity (hot-zone), a 3-D thermal field mapping technique, based on the thermal image, is being tested for temperatures up to 1100 C. Computational NIR absorption analysis was modified to now permit characterization of semi-insulating single crystals. Work on growth and characterization of bismuth-silicate was initiated. Growth of BSO (B12SiO20) for seed material by the Czochralski technique is currently in progress. Undergraduate research currently in progress includes: ground based measurements of the wetting behavior (contact angles) of semiconductor melts on substrates consisting of potential confinement materials for solidification experiments in a reduced gravity environment. Hardware modifications required for execution of the wetting experiments in a KC-135 facility are developed.

Witt, August F.↗

Potential Applications of Nuclear Resonance Fluorescence

Nuclear resonance fluorescence (NRF) is a photon-based active interrogation approach that provides isotope-specific signatures that can be used to detect and characterize samples. Photon energies are in the range of a few MeV, so that penetration through significant material is possible. Unlike other active interrogation techniques that are based on inducing fission, NRF is sensitive to a wide range of isotopes: for example {sup 11}B, {sup 12}C, {sup 13}C, {sup 14}N, {sup 16}O, {sup 27}Al, {sup 208}Pb, {sup 235}U, {sup 238}U and {sup 239}Pu just to name a few. NRF is most likely to outperform existing technologies for applications requiring isotopic information of sealed samples. Pacific Northwest National Laboratory is conducting a review of potential applications that could be addressed by NRF techniques. These applications cover a wide range of topics, from geo-location, to material assay, to safeguarding the nuclear fuel cycle. The objective of the project is to search for potential applications, define technical requirements, identify physical limitations, conduct an initial assessment of the technique and design a research approach for developing the applications. In this report, our current progress on will be presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Axial Ge/Si nanowire heterostructure tunnel FETs

The vapor-liquid-solid (VLS) growth of semiconductor nanowires allows doping and composition modulation along their axis and the realization of axial 1 D heterostructures. This provides additional flexibility in energy band-edge engineering along the transport direction which is difficult to attain by planar materials growth and processing techniques. We report here on the design, growth, fabrication, and characterization of asymmetric heterostructure tunnel field-effect transistors (HTFETs) based on 100% compositionally modulated Si/Ge axial NWs for high on-current operation and low ambipolar transport behavior. We discuss the optimization of band-offsets and Schottky barrier heights for high performance HTFETs and issues surrounding their experimental realization. Our HTFET devices with 10 nm PECVD SiN{sub x} gate dielectric resulted in a measured current drive exceeding 100 {mu}A/{mu}m (I/{pi}D) and 10{sup 5} I{sub on}/I{sub off} ratios.

36 MATERIALS SCIENCE↗

KINETIC STUDY OF AGING IN A URANIUM-TITANIUM EUTECTOID ALLOY USING THERMOELECTRIC POWER MEASUREMENT

Considerable attention has been given to the study of microstructure evolution and mechanical properties of dilute U-Ti alloys. A typical procedure of heat treatment of the eutectoid uranium-titanium alloy consists of solution treatment in the {gamma} phase, obtaining of soft {alpha}{sup '} martensitic metastable structure by water quenching to room temperature and precipitation hardening by aging at 300-550 deg. C. Depending on employed temperature and time the aging results in GP zone formation through the precipitation reaction {alpha}{sup '}{yields}{alpha}+{delta}. The {delta} phase is a hexagonal U{sub 2}Ti intermetallic compound, responsible for the significant increase in the level of the micro-strain in the metastable {alpha}{sup '} matrix. Thermoelectric power (TEP) measurements have recently gained a growing attention for the characterization of metallurgical properties in steels and other alloys. These measurements, which are based on the Seebeck effect, are sensitive to changes in the electronic structure of the material as result of various metallurgical processes. In the current research, TEP measurement technique was applied as a non destructive assessment technique to characterize the aging kinetics of the quenched uranium-titanium binary alloy. Good correlation has been found between measured TEP, micro-strain evolution, as obtained by using XRD, and hardness values at different heat treatment stages. A reasonable explanation of the correlation between the crystallography changes, micro-strain, TEP measurements and properties is presented.

36 MATERIALS SCIENCE↗

Calibrating IR Cameras for In-Situ Temperature Measurement During the Electron Beam Melting Process using Inconel 718 and Ti-Al6-V4

The Department of Energy s (DOE) Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) provides world-leading capabilities in advanced manufacturing (AM) facilities which leverage previous, on-going government investments in materials science research and characterization. MDF contains systems for fabricating components with complex geometries using AM techniques (i.e. 3D-Printing). Various metal alloy printers, for example, use electron beam melting (EBM) systems for creating these components which are otherwise extremely difficult- if not impossible- to machine. ORNL has partnered with manufacturers on improving the final part quality of components and developing new materials for further advancing these devices. One method being used to study (AM) processes in more depth relies on the advanced imaging capabilities at ORNL. High performance mid-wave infrared (IR) cameras are used for in-situ process monitoring and temperature measurements. However, standard factory calibrations are insufficient due to very low transmissions of the leaded glass window required for X-ray absorption. Two techniques for temperature calibrations will be presented and compared. In-situ measurement of emittance will also be discussed. Ample information can be learned from in-situ IR process monitoring of the EBM process. Ultimately, these imaging systems have the potential for routine use for online quality assurance and feedback control.

Electron-Beam Melting↗

Imaging Study of Multi-Crystalline Silicon Wafers Throughout the Manufacturing Process: Preprint

Imaging techniques are applied to multi-crystalline silicon bricks, wafers at various process steps, and finished solar cells. Photoluminescence (PL) imaging is used to characterize defects and material quality on bricks and wafers. Defect regions within the wafers are influenced by brick position within an ingot and height within the brick. The defect areas in as-cut wafers are compared toimaging results from reverse-bias electroluminescence and dark lock-in thermography and cell parameters of near-neighbor finished cells. Defect areas are also characterized by defect band emissions. The defect areas measured by these techniques on as-cut wafers are shown to correlate to finished cell performance.

14 SOLAR ENERGY↗

Accident Performance of Light Water Reactor Cladding Materials

During a loss of coolant accident as experienced at Fukushima, inadequate cooling of the reactor core forces component temperatures ever higher where they must withstand aggressive chemical environments. Conventional zirconium cladding alloys will readily oxidize in the presence of water vapor at elevated temperatures, rapidly degrading and likely failing. A cladding breach removes the critical barrier between actinides and fission products and the coolant, greatly increasing the probability of the release of radioactivity in the event of a containment failure. These factors have driven renewed international interest in both study and improvement of the materials used in commercial light water reactors. Characterization of a candidate cladding alloy or oxidation mitigation technique requires understanding of both the oxidation kinetics and hydrogen production as a function of temperature and atmosphere conditions. Researchers in the MST division supported by the DOE-NE Fuel Cycle Research and Development program are working to evaluate and quantify these parameters across a wide range of proposed cladding materials. The primary instrument employed is a simultaneous thermal analyzer (STA) equipped with a specialized water vapor furnace capable of maintaining temperatures above 1200°C in a range of atmospheres and water vapor contents. The STA utilizes thermogravimetric analysis and a coupled mass spectrometer to measure in situ oxidation and hydrogen production of candidate materials. This capability is unprecedented in study of materials under consideration for reactor cladding use, and is currently being expanded to investigate proposed coating techniques as well as the effect of coating defects on corrosion resistance.

08 HYDROGEN↗

Two-step Conversion of Crude Glycerol Generated by Biodiesel Production into Biopolyols: Synthesis, Structural and Physical Chemical Characterization

In this work biopolyols were synthesized via two-step process from crude glycerol and castor oil. For better evaluation of analyzed process, the impact of its time and temperature on the structure and properties of biopolyols was determined. Obtained results fully justified conducting of synthesis in two steps. Prepared materials were characterized by hydroxyl value and water content comparable to polyols industrially applied in manufacturing of polyurethane materials. Synthesized biopolyols were characterized in terms of their chemical structure using spectroscopic techniques: Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance spectroscopy. Obtained data confirmed the influence of synthesis’ parameters on the chemical structure of prepared biopolyols and correlated with their other parameters. On both stages of reaction, collected by-products were also analyzed with FTIR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic degradation of orange II dye via high pore volume polymorph zirconium-doped titania under visible light irradiation

A series of mixed-phase Zr-doped TiO 2 was utilized for the photocatalytic degradation of orange II dye. These materials were synthesized through a sol–gel technique by varying the amounts of zirconium in the photocatalysts. These materials were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray fluorescence (XRF), Raman spectroscopy, thermogravimetry analysis (TGA), and X-ray photoelectron spectroscopy (XPS) among others. XRF and XPS data showed that the elemental composition of the photocatalysts consists of zirconium, titanium, and oxygen. In addition, XRD and Raman spectroscopy confirmed the existence of anatase and rutile phases of TiO 2 . The TGA analyses showed that the undoped TiO 2 was the most stable, with no significant weight loss during the heating range. Furthermore, the materials can effectively degrade orange II dye solution up to 7 cycles through asymmetric cleavage of the azo bond.

36 MATERIALS SCIENCE↗

Dynamic fracture of glass fiber-reinforced ductile polymer matrix composites and loading rate effect

Here, the dynamic fracture of S-2 glass fiber-reinforced polymer matrix composites (FRPMCs) was investigated in this study. The matrix ductility was improved by a recently developed network topology modification technique via mixing partially reacted substructures (mPRS). The composite material was manufactured and characterized by micro-CT scanning and scanning electron microscopy (SEM). Dynamic single-edge notched bending (d-SENB) experiments were performed on the composites by using a modified split-Hopkinson pressure bar. Each specimen’s fracture process was visualized by ultrafast X-ray imaging. Such in-situ radiography enabled identifying the damage initiation below 50-micron scale and inspecting its propagation through the internal structures of opaque composites, thereby accurately quantifying the composites’ mechanical properties. Furthermore, the identical d-SENB experiments were designed and the digital image correlation (DIC) was employed to monitor the stress wave propagation on the composite specimens. The force and deflection measurements were modified and correlated to the physical damage processes. Besides, quasi-static SENB experiments were conducted to identify the loading rate effects on the composites’ fracture behaviors. The force and deflection history, bending stiffness, energy dissipation, and fracture toughness at different loading rates were quantified and compared. Finally, post-fracture analysis by micro-CT scanning and SEM provided physical observations on the variation of the fracture morphology by different loading rates.

42 ENGINEERING↗

Mechanosynthesis, deposition and characterization of CZTS and CZTSe materials for solar cell applications

Mechanosynthesis of nanocrystalline powders of CZTS and CZTSe by ball milling technique and the physical properties of thermally evaporated CZTS and CZTSe thin films as a function of substrate temperature are investigated. Nanocrystalline Cu–Zn–Tin–Sulphide (CZTS) and Cu–Zn–Tin–Selenide (CZTSe) powders synthesized by ball milling at different milling time using the source materials of Cu, Zn, Sn, S (or) Se in the ratio 2:1:1:4 are investigated. The above synthesized powder was thermally evaporated on glass substrate kept at room temperature and 673 K under a vacuum of 10{sup −6} mbar to prepare quaternary compound semiconducting thin films in a single step process. The synthesized powder and deposited CZTS and CZTSe thin films belong to tetragonal crystal system. Raman spectra reveal that the synthesized nanocrystals are pure without any secondary phases. A gradual reduction in optical bandgap of films was observed with increasing substrate temperature due to increased crystallinity of the films. The changes in surface morphology of the films with respect to substrate temperature were studied by scanning electron microscopy and atomic force microscopy. Electrical studies indicate that the deposited films have p-type conductivity. - Highlights: • Nanocrystalline powders of CZTS and CZTSe are synthesized by ball milling technique. • The ball milled powder was thermally evaporated on glass at room temperature and 673 K. • Raman spectroscopy reveals that the synthesized nanocrystals are pure without any secondary phases. • SEM and AFM micrographs illustrate the granular type of growth and the roughness and particle sizes obtained at the substrate temperature of 673 K are higher than those obtained in the room temperature. • Hall coefficient obtained for the film confirms the p-type conductivity. • A gradual reduction in optical bandgap was observed with increasing substrate temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

The porous carbon blacks rationally designed by a facile yet efficient NH 3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g -1 at 50 mA g -1 and a superior rate capability of 101 mAh g -1 at 16000 mA g -1 , due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g -1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g -1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. In conclusion, this system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quasi-In-Situ Analysis of Electrode Top Atomic Layers via High-Sensitivity Low-Energy Ion Scattering and Potential-Controlled Sample Transfer

Electrocatalytic reactions involve interfacial interactions between the surfaces of electrodes and reactive species at an electrolyte interface. There are presently no universal or unambiguous methods to directly assay the active top atomic layer composition that influences the reactivity of these electrodes under relevant operating conditions. Low-energy ion scattering (LEIS) spectroscopy is a surface characterization technique that yields compositional analysis of the outermost atomic layer of a material, but it must be performed in ultrahigh vacuum (UHV). Application of LEIS measurements to electrochemical materials that are removed from ambient liquid-phase environments thus leaves an open question as to whether the surface that is transferred to UHV is truly the surface that manifested during the electrochemical reaction. Toward the goal of preserving the active surface state, we developed a sample transfer workflow for LEIS enabling air-free removal and drying of an electrode from an electrochemical cell while maintaining control of the potential using an auxiliary electrode. The potential-controlled emersion method was demonstrated to give distinct potential-dependent surface compositions for a Cu−Pd alloy relative to removal after uncontrolled return to open-circuit potential. A Cu-enriched surface was found at anodic potential and a Pd-enriched surface at cathodic potential, suggesting that the approach can be used to retain representative atomic configurations during transfer. Since adsorbates will often persist from the reaction environment, conventional sample pretreatment methods for removal, including atomic O and atomic H exposure, were also contrasted. Both methods were found to differ with results from incidental low-dose depth profiling by the LEIS primary ion source, which removes adventitious species and surface atoms during the course of repeated measurements. These depth profiles were found to be sensitive to sample history and thus qualitatively informative, despite the possible changes induced by ion damage. The results exhibit (i) the need for complete control over the polarization state of the sample at all times (no excursions to open circuit during transfer) and (ii) the utility of low-dose depth profiling to capture changes in the near-surface composition.

Alloys↗